Product Description
Parameter:
| Product Name | Angular contact ball bearing |
| Brand Name | KSA |
| Material | Gcr15 |
| Precision Grade | P0,P6,P5 |
| Certification | ISO 9001 |
| Packeage | Box /Carton/Wooden Box/Plastic Tube or Per buyers requirement |
| MOQ | Depending On Moedl |
| Serice | OEM |
| Sample | Available |
| Payment | TT or L/C or Western Union |
| Port | HangZhou ZheJiang HangZhou |
In order to meet the performance requirements of bearings, Chinese bearing steel has more excellent performance:
1. Higher contact fatigue strength
2. after heat treatment with higher hardness to meet the bearing performance requirements
3. higher wear resistance, lower friction coefficient
4. Higher elastic limit
5. better impact toughness and fracture toughness
6. better dimensional stability
7. better rust resistance
ANGULAR CONTACT BALL BEARING SERIES
where C is 15 degrees contact Angle, AC is 25 degrees contact Angle, B is 40 degrees contact Angle, the bearing limit speed is higher, can bear both radial load and axial load, can also bear pure axial load, the axial load capacity is determined by the contact Angle, and increases with the increase of the contact Angle. It can only withstand the axial load in 1 direction, when bearing the radial load, it will cause additional axial force, and must apply the corresponding reverse load, so the bearing is generally used in pairs.
SINGLE ROW ANGULAR CONTACT BALL BEARING
Single-row angular contact ball bearings can only bear axial load in 1 direction, and additional axial force will be caused when bearing radial load. And only limit the axial displacement of the shaft or housing in 1 direction. Angular contact ball bearings have a contact Angle of 40 degrees, so they can withstand large axial loads. Angular contact ball bearings are of a non-separation design, and the shoulders on both sides of the inner and outer rings are not high or low. In order to increase the load capacity of the bearing, the shoulder on 1 side is machined lower, so that the bearing can fit more steel balls.
DOUBLE ROW ANGULAR CONTACT BALL BEARING
Double row angular contact ball bearings can bear large radial loads, mainly radial and axial combined loads and torque loads, limiting the axial displacement of both sides of the shaft. The inclinability between the inner and outer rings of the double-row angular contact ball bearing is limited in the parts mainly used to limit the two-way axial displacement of the shaft and the housing. The allowable inclination Angle depends on the internal clearance of the bearing, the bearing size, the internal design and the force and moment acting on the bearing, and the allowable inclination Angle should ensure that no excessive additional stress is generated in the bearing. If the inclination Angle between the inner and outer rings of the bearing exists, the life of the bearing will be affected, and the running accuracy of the bearing will be reduced, and the running noise will be increased. Double row angular contact ball bearings generally use nylon cages or brass solid cages. When installing double row angular contact ball bearings, attention should be paid to the fact that although the bearings can withstand two-way axial loads, if there is a ball loading gap on 1 side, care should be taken not to let the main axial load pass through the groove side with a gap. When the bearing is used, attention should be paid to making the raceway without the ball filling gap bear the main load.
OUR ADVANTAGE:
1.Our products: with high quality, long life, high speed, low noise, low friction quality products
2. We have: sufficient storage space, sufficient inventory, high production efficiency, we provide customers with the most favorable prices
3. Chinese bearing: in China’s production line, products are exported to all over the world, product specifications are complete, certificates are complete, professional R & D team
4. After-sales service and technical guidance: The company provides after-sales service and technical guidance according to customer requirements and needs
Company Profile
ZheJiang Kangshi Precision Bearing Manufacturing Co., Ltd., located in Yandian Town Industrial Park, HangZhou City, ZheJiang Province, mainly produces zero deep groove ball bearings, 2 types of cylindrical roller bearings, 3 types of aligning roller bearings, 6 types of angular contact ball bearings, 7 types of tapered roller bearings, 8 types of thrust ball bearings, thrust bearings, 9 types of thrust aligning roller bearings, outer spherical bearings, auto parts, Motorcycle parts and other rolling bearings. Our factory has strong professional technology, good production equipment and perfect testing means, can fully meet the various types, specifications, high precision and special use requirements of bearing products customized processing, the production process of the product according to the strict national standards of enterprise internal control standards for the implementation of full inspection and multi-project comprehensive inspection of factory products, Can ensure the quality of each set of factory bearing products to meet national standards. Kangshi bearing has always implemented national standards, market prices, and implemented the “three guarantees” principle for customers: To ensure high-quality quality, preferential prices, superior after-sales service! Welcome customers at home and abroad to consult and negotiate business, the company will continue to win the trust of more customers with good product quality and reputation.
OUR FACTORY QUALITY ASSURANCE
LOW NOISE, HIGH SPEED AND NOT EASY TO BURN EXCELLENT AFTER-SALES SERVICE
PACKAGING AND TRANSPORTATION
1.Industrial packing in general condition (Plastic drums/boxes/industrial packaging + cartons + pallets).
Accept design package when OEM.
MAIN USE
Single row angular contact ball bearings: machine spindle, high frequency motor, gas turbine, centrifugal separator, small car front wheel, differential pinion shaft, booster pump, drilling platform, food machinery, dividing head, welding machine, low noise type cooling tower, mechanical and electrical equipment, painting equipment, machine slot plate, arc welding machine, etc
Double row angular contact ball bearings: oil pump, Roots blower, air compressor, various transmission, fuel injection pump, printing machinery, planetary reducer, extraction equipment, cycloidal reducer, food packaging machinery, electric welding machine, electric soldering iron, square box, gravity spray gun, wire stripping machine, half shaft, inspection and analysis equipment, fine chemical machinery, etc
FAQ
Q: What is the MOQ?
A: It depends on the bearing type. You can send inquiry or send e-mail for more information.
Q: How about the package?
A: Industrial packing in general condition (Plastic drums/boxes/industrial packaging + cartons + pallets). Accept design package when OEM.
Q: How long is the delivery time?
A: It will take about 10 to 40 days, depends on the model and quantity.
Q:What are the advantages of your company’s services compared to other companies?
A: Factory direct supply, price advantage, 24 hours online timely reply, Provide customers with customs clearance
and quality of various documents, 100% after-sales service
Q:OEM POLICY
A:We can printing your brand (logo,artwork)on the bearings or laser engraving your brand on the bearings.
We can custom your packaging according to your design All copyright own by clients and we promised don’t
disclose any info.
Q:How to contact us quickly?
A:Please send us an inquiry or message and leave your other contact information, such as phone number,
account or account, we will contact you as soon as possible and provide the detailed information
you need.
Please feel free to contact us, if you have any other question
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Contact Angle: | 25° |
|---|---|
| Aligning: | Aligning Bearing |
| Separated: | Unseparated |
| Samples: |
US$ 2/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Are there Specific Maintenance Practices to Ensure the Longevity of Ball Bearings?
Maintaining ball bearings is essential to ensure their longevity, reliable performance, and prevent premature failure. Proper maintenance practices can extend the lifespan of ball bearings and the equipment they are used in. Here are specific maintenance practices to consider:
- Regular Lubrication:
Implement a regular lubrication schedule using the appropriate lubricant for the application. Lubrication reduces friction, prevents wear, and helps dissipate heat. Follow manufacturer guidelines for lubricant type, quantity, and frequency.
- Clean Environment:
Keep the operating environment clean and free from contaminants. Dust, dirt, and debris can infiltrate bearings and cause damage. Use seals or shields to protect bearings from contaminants, especially in harsh environments.
- Proper Installation:
Ensure correct installation of bearings using proper tools and techniques. Improper installation can lead to misalignment, uneven load distribution, and premature wear. Follow manufacturer recommendations for installation procedures.
- Regular Inspections:
Perform routine visual inspections to check for signs of wear, damage, or contamination. Regular inspections can help identify issues early and prevent further damage. Pay attention to noise, vibration, and temperature changes.
- Temperature Monitoring:
Monitor bearing temperatures during operation using infrared thermometers or sensors. Abnormal temperature increases can indicate inadequate lubrication, misalignment, or other problems.
- Correct Handling:
Handle bearings with care to prevent damage during storage, transportation, and installation. Avoid dropping or subjecting them to impacts that can affect their internal components.
- Bearing Removal and Replacement:
Follow proper procedures when removing and replacing bearings. Use appropriate tools and techniques to avoid damage to the bearing or the surrounding components.
- Alignment Maintenance:
Maintain proper shaft and housing alignment to prevent excessive loads and wear on the bearing. Misalignment can lead to increased stress and premature failure.
- Training and Education:
Provide training to operators and maintenance personnel on proper bearing maintenance and handling practices. Educated personnel are more likely to identify issues and perform maintenance correctly.
- Documented Records:
Keep records of maintenance activities, inspections, lubrication schedules, and any issues encountered. This documentation helps track the bearing’s performance over time and informs future maintenance decisions.
By implementing these maintenance practices, you can ensure the longevity of ball bearings, minimize downtime, reduce operational costs, and maintain the reliability of the equipment they are a part of.
Are there any Industry Standards or Certifications that Ball Bearings should Meet?
Yes, there are several industry standards and certifications that ball bearings should meet to ensure their quality, performance, and reliability. These standards help manufacturers, engineers, and customers assess the suitability of bearings for specific applications. Some of the key standards and certifications for ball bearings include:
- ISO Standards:
The International Organization for Standardization (ISO) has developed a series of standards related to ball bearings. ISO 15 defines dimensions, boundary dimensions, and tolerances for radial bearings. ISO 281 specifies dynamic load ratings and calculation methods for bearings’ life calculations.
- ABEC (Annular Bearing Engineering Committee) Ratings:
ABEC ratings are commonly used in North America to indicate the precision and performance of ball bearings. Ratings range from ABEC 1 (lowest precision) to ABEC 9 (highest precision). However, it’s important to note that ABEC ratings focus primarily on dimensional tolerances and do not encompass all aspects of bearing quality.
- DIN Standards:
The German Institute for Standardization (Deutsches Institut für Normung, DIN) has published various standards related to ball bearings. DIN 625 covers dimensions for deep groove ball bearings, while DIN 616 provides guidelines for precision angular contact ball bearings.
- JIS (Japanese Industrial Standards):
JIS standards are used in Japan and internationally to define the characteristics and dimensions of various products, including ball bearings. JIS B 1512 outlines the classification and dimensions of rolling bearings.
- ASTM (American Society for Testing and Materials) Standards:
ASTM has standards that cover various aspects of bearing testing, performance, and materials. ASTM F2215, for instance, specifies the requirements for ball bearings used in surgical implants.
- CE Marking:
CE marking indicates that a product complies with European Union health, safety, and environmental requirements. It may be required for bearings used in machinery intended to be sold within the EU market.
- Industry-Specific Standards:
Various industries, such as aerospace, automotive, medical, and nuclear, have specific standards or certifications that bearings must meet to ensure safety, reliability, and compliance with industry-specific requirements.
- Quality Management Systems:
Manufacturers that adhere to quality management systems, such as ISO 9001, demonstrate their commitment to consistent product quality and customer satisfaction. Certification to these systems indicates that the manufacturing process follows established protocols and best practices.
When selecting ball bearings, it’s important to consider the relevant standards and certifications that align with the application’s requirements. This ensures that the bearings meet recognized quality and performance criteria, ultimately contributing to reliable and efficient operation.
What are the Primary Benefits of Using Ball Bearings in Machinery and Equipment?
Ball bearings offer several primary benefits when used in machinery and equipment. Their design and functionality provide advantages that contribute to the efficient and reliable operation of various applications. Here are the key benefits:
- Reduced Friction:
One of the primary benefits of ball bearings is their ability to minimize friction between moving parts. The rolling motion of the balls reduces the contact area and sliding friction, leading to smoother operation and less energy loss due to frictional heating.
- Efficient Load Support:
Ball bearings are engineered to support both radial and axial loads, making them versatile for applications with multidirectional forces. This load-bearing capability allows machinery to handle different types of loads while maintaining performance and stability.
- Smooth Rotation:
Ball bearings enable smooth and precise rotational movement. The rolling motion of the balls provides consistent motion with minimal resistance, ensuring that machinery operates smoothly and without jerks.
- High-Speed Capability:
Due to their low friction and efficient rolling action, ball bearings are suitable for high-speed applications. They allow machinery and equipment to achieve and maintain high rotational speeds without excessive wear or heat buildup.
- Reduced Wear and Maintenance:
The reduced friction in ball bearings leads to lower wear on components. This results in longer service intervals and reduced maintenance requirements, saving both time and maintenance costs.
- Energy Efficiency:
By minimizing friction and reducing energy losses, ball bearings contribute to the overall energy efficiency of machinery. This is particularly important in applications where energy consumption is a concern.
- Versatility:
Ball bearings come in various types, sizes, and configurations, allowing them to be used in a wide range of machinery and equipment. They can be customized to suit specific application requirements.
- Reliability and Longevity:
Ball bearings are designed to withstand heavy loads and harsh operating conditions. Their durability and resistance to wear ensure reliable performance and an extended operational life.
- Quiet Operation:
Ball bearings contribute to quiet machinery operation due to the smooth rolling motion of the balls. This is particularly important in applications where noise reduction is a consideration.
In summary, the primary benefits of using ball bearings in machinery and equipment include reduced friction, efficient load support, smooth rotation, high-speed capability, reduced wear and maintenance, energy efficiency, versatility, reliability, and quiet operation. These benefits collectively enhance the performance and longevity of machinery across various industries.
editor by CX 2024-05-17
China wholesaler 6209 Zz 45*85*19 mm Single Row Ball Bearing 6209 2z for Air Compressor, Motor with Hot selling
Product Description
Product Description
6200 series deep groove ball bearings
other series: product-list-1.html
| Bearing NO | (mm)Boundary Dimensions | (Kn) | (Kn) | (r/min)Limit Rotational Speed | (Kg) Weight |
|||
| d | D | B | Dynamic Load Rating Cr |
Static Load Rating Cor |
Grease Lubrication | Oil Lubrication | ||
| 6200 | 10 | 30 | 9 | 5.11 | 2.39 | 24000 | 30000 | 0.032 |
| 6201 | 12 | 32 | 10 | 6.82 | 3.06 | 22000 | 28000 | 0.035 |
| 6202 | 15 | 35 | 11 | 7.64 | 3.72 | 20000 | 24000 | 0.045 |
| 6203 | 17 | 40 | 12 | 9.57 | 4.79 | 17000 | 20000 | 0.064 |
| 6204 | 20 | 47 | 14 | 12.84 | 6.65 | 15000 | 18000 | 0.103 |
| 6205 | 25 | 52 | 15 | 14.02 | 7.88 | 13000 | 15000 | 0.127 |
| 6206 | 30 | 62 | 16 | 19.46 | 11.31 | 11000 | 13000 | 0.202 |
| 6207 | 35 | 72 | 17 | 25.67 | 15.30 | 9500 | 11000 | 0.287 |
| 6208 | 40 | 80 | 18 | 29.52 | 18.14 | 8500 | 10000 | 0.367 |
| 6209 | 45 | 85 | 19 | 32.67 | 20.68 | 7500 | 9000 | 0.416 |
| 6210 | 50 | 90 | 20 | 35.07 | 23.18 | 7100 | 8500 | 0.462 |
| 6211 | 55 | 100 | 21 | 43.50 | 29.20 | 6300 | 7500 | 0.602 |
| 6212 | 60 | 110 | 22 | 52.50 | 36.00 | 5600 | 7100 | 0.789 |
| 6213 | 65 | 120 | 23 | 58.50 | 40.50 | 5300 | 6300 | 0.990 |
| 6214 | 70 | 125 | 24 | 63.70 | 45.00 | 5000 | 6300 | 1.100 |
| 6215 | 75 | 130 | 25 | 68.90 | 49.00 | 4800 | 5600 | 1.200 |
| 6216 | 80 | 140 | 26 | 72.50 | 53.00 | 4500 | 5300 | 1.400 |
| 6217 | 85 | 150 | 28 | 83.20 | 63.80 | 4300 | 5000 | 1.750 |
| 6218 | 90 | 160 | 30 | 95.80 | 71.50 | 4000 | 4800 | 2.200 |
| 6219 | 95 | 170 | 32 | 110.0 | 82.80 | 3800 | 4500 | 2.620 |
| 6220 | 100 | 180 | 34 | 122.0 | 92.80 | 3600 | 4300 | 3.200 |
| 6221 | 105 | 190 | 36 | 133.0 | 105.0 | 3400 | 4000 | – |
| 6222 | 110 | 200 | 38 | 144.0 | 117.0 | 2800 | 3400 | – |
| 6224 | 120 | 215 | 40 | 155.0 | 131.0 | 2600 | 3200 | – |
Detailed Photos
Black chamfer with rubber seal
Black chamfer with white dust cover
open UG
white chamfer with yellow dust cover
ceramic ball bearing
THE USE OF THE BEARING
Some tips on use
Rolling bearing is a precise part. Therefore it should be used carefully. No matter how high performance the bearing has, it can be obtained by improper use, the followings are the points for attention to use bearings.
(1) Keep clean the bearing and its surrounding areas
It is harmful to the bearing even by tiny dust which can not be seen by human eyes. Therefore it should always keep clean the surrounding environments in order to prevent the bearing from dust corrosion.
(2) Use bearing carefully
Scar and indentation can essily be produced out of strong impact to the bearing in use and become the cause of accidents. Therefore special caution should be given to its use.
(3) Use the appropriate operating tool
Avoid using a hammer or heavy direct tap on a bearing or sleeve, must use appropriate tools such as press or heating.
(4) Be careful to the rust corrosion of the bearings
The sweat in the hands will cause rust in operating the bearings. Therefore your hands should be cleanly washed and dried before operation. You’d better wear gloves in doing the work.
(5) Handler should familiar with bearing
(6) Establish bearing handling criteri
·Bearing storage
.Bearing and surrounding cleaning
.Dimension of mounting parts and inspection
.Machining quality
.Mounting handing
.After mounting inspection
·Disassembly handing
·Keep maintain
·Adding lubricant
Installation Instructions
Bearing mounting
Precautions for proper mounting of bearing
1) Bearing preparation
Bearing should not be unpacked until before mounting due to spray anti-corrosion oil and pack anti-corrosion paper. In addition, spray anti-corrosion oil on bearing have good lubricate function. For general purpose, just directly using bearing fill-in grease bearings, without cleaning. However, bearing for instrument or high speed rotating must be cleaned with clean filtered oil in order to remove the anti-corrosion oil. At that time, the bearings are easy to corrosion could not storage long term.
2) Inspection of shafts and housings
Cleaning shaft and housing, confirming no scratched or machine burrs, no CZPT and cutting piece in housing. Secondly comppare with drawing, the shaft and housing of dimension, form and machining quality should be inspected.
chart 1 Measure location for shaft diameter chart 2 Measure location for housing bore diameter
As chart 1 and chart 2 showing, divided several locations to be measure on shaft and housing bore diameters, It should be careful inspected perpendicular between shaft, housing fillet dimension and shoulder.
Before mounting bearing, it should be sprayed mechanical oil on fitting surface after check out the shaft and housing.
Bearing storage
Before leaving the factory, the bearing is sprayed proper rust-inhibiting oil and packed rust-inhibiting paper. The quality of bearing is guaranteed, if the packing is not broken.
For long-term storage, if the humidity less than 65% and the temperature about 20, it should storage on shelf which is higher 30cm than ground.
In addition, storage occasion should avoid sunshine and contact with cold wall.
Pictures about packaging
Company Profile
Our Advantages
1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.
SAMPLES
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to
pay samples charge and shipping cost.
3. It’s better to start your order with Trade Assurance to get full protection for your samples order.
CUSTOMIZED
The customized LOGO or drawing is acceptable for us.
MOQ
1. MOQ: 10 PCS standard bearings.
2. MOQ: 1000 PCS customized your brand bearings.
OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield.
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Motor Parts: | Motor Bearing |
|---|---|
| Water Pump Parts: | Water Pump Bearing |
| Air Compressor Parts: | Air Compressor Bearing |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | Order Sample black or white or as required
|
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What are the Common Signs of Wear or Damage in Ball Bearings that Indicate the Need for Replacement?
Ball bearings are subjected to wear and stress during operation, and over time, they may exhibit signs of damage or deterioration that warrant replacement. Recognizing these signs is crucial to prevent catastrophic failure and ensure safe and reliable operation. Here are the common signs of wear or damage in ball bearings:
- Unusual Noise:
If you hear unusual grinding, clicking, or rumbling noises coming from the bearing during operation, it may indicate worn-out or damaged components. Unusual noise suggests that the bearing is no longer operating smoothly.
- Vibration:
Excessive vibration in the machinery can be a sign of bearing wear. Vibrations can result from uneven wear, misalignment, or damaged components within the bearing.
- Increased Temperature:
Higher operating temperatures than usual may indicate increased friction due to inadequate lubrication, wear, or other issues. Monitoring the bearing’s temperature can help identify potential problems.
- Irregular Movement:
If you notice irregular movement, jerking, or sticking during rotation, it could be a sign that the bearing is no longer operating smoothly. This may be due to damaged rolling elements or raceways.
- Reduced Performance:
If the machinery’s performance has decreased, it may be due to a compromised bearing. Reduced efficiency, increased energy consumption, or a decline in overall performance could be indicators of bearing wear.
- Visible Wear or Damage:
Inspect the bearing for visible signs of wear, such as pitting, scoring, or discoloration on the rolling elements or raceways. Severe wear or damage is a clear indication that the bearing needs replacement.
- Leakage or Contamination:
If there is evidence of lubricant leakage, contamination, or the presence of foreign particles around the bearing, it suggests that the seal or shield may be compromised, leading to potential damage.
- Looseness or Excessive Play:
If you can feel excessive play or looseness when manually moving the bearing, it could indicate worn-out components or misalignment.
- Reduced Lifespan:
If the bearing’s expected lifespan is significantly shorter than usual, it may be due to inadequate lubrication, excessive loads, or improper installation, leading to accelerated wear.
- Frequent Failures:
If the bearing is consistently failing despite regular maintenance and proper use, it could indicate a chronic issue that requires addressing, such as inadequate lubrication or misalignment.
It’s important to conduct regular inspections, monitor performance, and address any signs of wear or damage promptly. Replacing worn or damaged ball bearings in a timely manner can prevent further damage to machinery, reduce downtime, and ensure safe and efficient operation.
Are there any Industry Standards or Certifications that Ball Bearings should Meet?
Yes, there are several industry standards and certifications that ball bearings should meet to ensure their quality, performance, and reliability. These standards help manufacturers, engineers, and customers assess the suitability of bearings for specific applications. Some of the key standards and certifications for ball bearings include:
- ISO Standards:
The International Organization for Standardization (ISO) has developed a series of standards related to ball bearings. ISO 15 defines dimensions, boundary dimensions, and tolerances for radial bearings. ISO 281 specifies dynamic load ratings and calculation methods for bearings’ life calculations.
- ABEC (Annular Bearing Engineering Committee) Ratings:
ABEC ratings are commonly used in North America to indicate the precision and performance of ball bearings. Ratings range from ABEC 1 (lowest precision) to ABEC 9 (highest precision). However, it’s important to note that ABEC ratings focus primarily on dimensional tolerances and do not encompass all aspects of bearing quality.
- DIN Standards:
The German Institute for Standardization (Deutsches Institut für Normung, DIN) has published various standards related to ball bearings. DIN 625 covers dimensions for deep groove ball bearings, while DIN 616 provides guidelines for precision angular contact ball bearings.
- JIS (Japanese Industrial Standards):
JIS standards are used in Japan and internationally to define the characteristics and dimensions of various products, including ball bearings. JIS B 1512 outlines the classification and dimensions of rolling bearings.
- ASTM (American Society for Testing and Materials) Standards:
ASTM has standards that cover various aspects of bearing testing, performance, and materials. ASTM F2215, for instance, specifies the requirements for ball bearings used in surgical implants.
- CE Marking:
CE marking indicates that a product complies with European Union health, safety, and environmental requirements. It may be required for bearings used in machinery intended to be sold within the EU market.
- Industry-Specific Standards:
Various industries, such as aerospace, automotive, medical, and nuclear, have specific standards or certifications that bearings must meet to ensure safety, reliability, and compliance with industry-specific requirements.
- Quality Management Systems:
Manufacturers that adhere to quality management systems, such as ISO 9001, demonstrate their commitment to consistent product quality and customer satisfaction. Certification to these systems indicates that the manufacturing process follows established protocols and best practices.
When selecting ball bearings, it’s important to consider the relevant standards and certifications that align with the application’s requirements. This ensures that the bearings meet recognized quality and performance criteria, ultimately contributing to reliable and efficient operation.
How does Lubrication Impact the Performance and Lifespan of Ball Bearings?
Lubrication plays a critical role in the performance and lifespan of ball bearings. Proper lubrication ensures smooth operation, reduces friction, minimizes wear, and prevents premature failure. Here’s how lubrication impacts ball bearings:
- Friction Reduction:
Lubrication creates a thin film between the rolling elements (balls) and the raceways of the bearing. This film reduces friction by separating the surfaces and preventing direct metal-to-metal contact. Reduced friction results in lower energy consumption, heat generation, and wear.
- Wear Prevention:
Lubricants create a protective barrier that prevents wear and damage to the bearing’s components. Without proper lubrication, the repeated rolling and sliding of the balls against the raceways would lead to accelerated wear, surface pitting, and eventual failure.
- Heat Dissipation:
Lubricants help dissipate heat generated during operation. The rolling elements and raceways can generate heat due to friction. Adequate lubrication carries away this heat, preventing overheating and maintaining stable operating temperatures.
- Corrosion Resistance:
Lubrication prevents moisture and contaminants from coming into direct contact with the bearing’s surfaces. This helps protect the bearing against corrosion, rust, and the formation of debris that can compromise its performance and longevity.
- Noise Reduction:
Lubricated ball bearings operate quietly because the lubricant cushions and dampens vibrations caused by the rolling motion. This noise reduction is crucial in applications where noise levels need to be minimized.
- Seal Protection:
Lubricants help maintain the effectiveness of seals or shields that protect the bearing from contaminants. They create a barrier that prevents particles from entering the bearing and causing damage.
- Improved Efficiency:
Properly lubricated ball bearings operate with reduced friction, leading to improved overall efficiency. This is especially important in applications where energy efficiency is a priority.
- Lifespan Extension:
Effective lubrication significantly extends the lifespan of ball bearings. Bearings that are properly lubricated experience less wear, reduced fatigue, and a lower likelihood of premature failure.
- Selection of Lubricant:
Choosing the right lubricant is essential. Factors such as speed, temperature, load, and environmental conditions influence the choice of lubricant type and viscosity. Some common lubricant options include grease and oil-based lubricants.
- Regular Maintenance:
Regular lubrication maintenance is crucial to ensure optimal bearing performance. Bearings should be inspected and relubricated according to manufacturer recommendations and based on the application’s operating conditions.
In summary, proper lubrication is essential for the optimal performance, longevity, and reliability of ball bearings. It reduces friction, prevents wear, dissipates heat, protects against corrosion, and contributes to smooth and efficient operation in various industrial and mechanical applications.
editor by CX 2024-05-17
China high quality 6801-RS 12*21*5mm Single Row Thin-Walled Deep Groove Ball Bearings for Mechanical Equipment carrier bearing
Product Description
6800 series deep groove ball bearings
Product Description
Deep Groove Ball Bearings
Deep groove ball bearing
This is the most widely used ball bearing type. Trapped between the 2 races is a ring of balls that transmit the load and allows rotational motion between the 2 races. The balls are held in place by a retainer.
They have very low rolling friction and are optimized for low noise and low vibration. This makes them ideal for high-speed applications.
They are comparatively easy to install and require minimal maintenance. Care must be taken during installation to prevent denting of the races as they have to be push fit CZPT shafts.6800 series deep groove ball bearings
Detailed Photos
Product Parameters
| No. | Size | Rated load | Weight | ||||||||||
| Inner Diameter | Out Diameter | Width (B) | Chamfering | Dynamic | Static | ||||||||
| d | D | Open Type | Shielded Type | rsmin (r) | Cr | Cr | Close | ||||||
| mm | inch | mm | inch | mm | inch | mm | inch | mm | inch | N | N | KG | |
| 603 | 3 | 0.1181 | 9 | 0.3543 | 3 | 0.1181 | 5 | 0.1181 | 0.2 | 0.008 | 486 | 223 | 0.0014 |
| 604 | 4 | 0.1575 | 12 | 0.4724 | 4 | 0.1575 | 4 | 0.1575 | 0.2 | 0.008 | 960 | 350 | 0.571 |
| 605 | 5 | 0.1969 | 14 | 0.5512 | 5 | 0.1969 | 5 | 0.1969 | 0.2 | 0.008 | 1070 | 420 | 0.0037 |
| 606 | 6 | 0.2362 | 17 | 0.6693 | 6 | 0.2362 | 6 | 0.2362 | 0.3 | 0.012 | 1960 | 730 | 0.0069 |
| 607 | 7 | 0.2756 | 19 | 0.7480 | 6 | 0.2362 | 6 | 0.2362 | 0.3 | 0.012 | 2800 | 1060 | 0.0082 |
| 608 | 8 | 0.3150 | 22 | 0.8661 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 3290 | 1360 | 0.0129 |
| 609 | 9 | 0.3543 | 24 | 0.9449 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 3330 | 1410 | 0.0160 |
| 6000 | 10 | 0.3937 | 26 | 1.5716 | 8 | 0.3150 | 8 | 0.3150 | 0.3 | 0.012 | 4160 | 1780 | 0.0190 |
| 6001 | 12 | 0.4724 | 28 | 1.1571 | 8 | 0.3150 | 8 | 0.3150 | 0.3 | 0.012 | 5110 | 2380 | 0.5710 |
| 6002 | 15 | 0.5906 | 32 | 1.2598 | 9 | 0.3543 | 9 | 0.3543 | 0.3 | 0.012 | 5590 | 2840 | 0.0300 |
| 6003 | 17 | 0.6693 | 35 | 1.3780 | 10 | 0.3937 | 10 | 0.3937 | 0.3 | 0.012 | 6000 | 3250 | 0.0390 |
| 6004 | 20 | 0.7874 | 42 | 1.6535 | 12 | 0.4724 | 12 | 0.4724 | 0.6 | 0.571 | 9390 | 5571 | 0.0690 |
| 6005 | 25 | 0.9843 | 47 | 1.8504 | 12 | 0.4724 | 12 | 0.4724 | 0.6 | 0.571 | 10060 | 5860 | 0.0800 |
| 6006 | 30 | 1.1811 | 55 | 2.1654 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.039 | 11900 | 7460 | 0.1160 |
| 6007 | 35 | 1.3780 | 62 | 2.4409 | 14 | 0.5512 | 14 | 0.5512 | 1 | 0.039 | 16210 | 10420 | 0.1150 |
| 6008 | 40 | 1.5748 | 68 | 2.6677 | 15 | 0.5906 | 15 | 0.5906 | 1 | 0.039 | 17030 | 11700 | 0.1920 |
| 6009 | 45 | 1.7717 | 75 | 2.9528 | 16 | 0.6299 | 16 | 0.6299 | 1 | 0.039 | 21080 | 14780 | 0.2450 |
| 6571 | 50 | 1.9685 | 80 | 3.1496 | 16 | 0.6299 | 16 | 0.6299 | 1 | 0.039 | 22000 | 16260 | 0.2610 |
| 60/22 | 22 | 0.8661 | 44 | 1.7323 | 12 | 0.4724 | 12 | 0.4724 | 0.6 | 0.571 | 9400 | 5050 | 0.0740 |
| 60/28 | 28 | 1.1571 | 52 | 2.571 | 12 | 0.4724 | 12 | 0.4724 | 0.6 | 0.571 | 12500 | 7400 | 0.0980 |
| 60/32 | 32 | 1.2598 | 58 | 2.2835 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.039 | 15100 | 9150 | 0.1290 |
| No. | Size | Rated load | Weight | ||||||||||
| Inner Diameter | Out Diameter | Width (B) | Chamfering | Dynamic | Static | ||||||||
| d | D | Open Type | Shielded Type | rsmin (r) | Cr | Cr | Close | ||||||
| mm | inch | mm | inch | mm | inch | mm | inch | mm | inch | N | N | KG | |
| 623 | 3 | 0.1181 | 10 | 0.3937 | 4 | 0.1575 | 4 | 0.1575 | 0.15 | 0.006 | 640 | 220 | 0.0016 |
| 624 | 4 | 0.1575 | 13 | 0.5118 | 5 | 0.1969 | 5 | 0.1969 | 0.2 | 0.008 | 1150 | 400 | 0.0032 |
| 625 | 5 | 0.1969 | 16 | 0.6299 | 5 | 0.1969 | 5 | 0.1969 | 0.3 | 0.012 | 1880 | 680 | 0.0051 |
| 626 | 6 | 0.2362 | 19 | 0.7480 | 6 | 0.2362 | 6 | 0.2362 | 0.3 | 0.012 | 2800 | 1060 | 0. |
| 627 | 7 | 0.2756 | 22 | 0.8661 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 3290 | 1360 | 0.0131 |
| 628 | 8 | 0.3150 | 24 | 0.9449 | 8 | 0.3150 | 8 | 0.3150 | 0.3 | 0.012 | 3330 | 1410 | 0.0170 |
| 629 | 9 | 0.3543 | 26 | 1.5716 | 8 | 0.3150 | 8 | 0.3150 | 0.3 | 0.012 | 4160 | 1780 | 0.0191 |
| 6200 | 10 | 0.3937 | 30 | 1.1811 | 9 | 0.3543 | 9 | 0.3543 | 0.6 | 0.571 | 5110 | 2380 | 0.0320 |
| 6201 | 12 | 0.4724 | 32 | 1.2598 | 10 | 0.3937 | 10 | 0.3937 | 0.6 | 0.571 | 6180 | 3060 | 0.571 |
| 6202 | 15 | 0.5906 | 35 | 1.3780 | 11 | 0.4331 | 11 | 0.4331 | 0.6 | 0.571 | 7450 | 3700 | 0.0450 |
| 6203 | 17 | 0.6693 | 40 | 1.5748 | 12 | 0.4724 | 12 | 0.4724 | 0.6 | 0.571 | 9560 | 4780 | 0.0650 |
| 6204 | 20 | 0.7874 | 47 | 1.8504 | 14 | 0.5512 | 14 | 0.5512 | 1 | 0.039 | 12840 | 6650 | 0.1060 |
| 6205 | 25 | 0.9843 | 52 | 2.571 | 15 | 0.5906 | 15 | 0.5906 | 1 | 0.039 | 14571 | 7930 | 0.1280 |
| 6206 | 30 | 1.1811 | 62 | 2.4409 | 16 | 0.6299 | 16 | 0.6299 | 1 | 0.039 | 19460 | 11310 | 0.1990 |
| 6207 | 35 | 1.3780 | 72 | 2.8346 | 17 | 0.6693 | 17 | 0.6693 | 1.1 | 0.043 | 25670 | 15300 | 0.2880 |
| 6208 | 40 | 1.5748 | 80 | 3.1496 | 18 | 0.7087 | 18 | 0.7087 | 1.1 | 0.043 | 29520 | 18140 | 0.3660 |
| No. | Size | Rated load | Weight | ||||||||||
| Inner Diameter | Out Diameter | Width (B) | Chamfering | Dynamic | Static | ||||||||
| d | D | Open Type | Shielded Type | rsmin (r) | Cr | Cr | Close | ||||||
| mm | inch | mm | inch | mm | inch | mm | inch | mm | inch | N | N | KG | |
| 633 | 3 | 0.1181 | 13 | 0.5118 | 5 | 0.1969 | 5 | 0.1969 | 0.2 | 0.008 | 1300 | 485 | 0.0034 |
| 634 | 4 | 0.1575 | 16 | 0.6299 | 5 | 0.1969 | 5 | 0.1969 | 0.3 | 0.012 | 1880 | 680 | 0.0054 |
| 635 | 5 | 0.1969 | 19 | 0.7480 | 6 | 0.2362 | 6 | 0.2362 | 0.3 | 0.012 | 2810 | 1060 | 0.0089 |
| 636 | 6 | 0.2362 | 22 | 0.8661 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 3290 | 1360 | 0.0145 |
| 637 | 7 | 0.2756 | 26 | 1.5716 | 9 | 0.3543 | 9 | 0.3543 | 0.3 | 0.012 | 3340 | 1410 | 0.5718 |
| 638 | 8 | 0.3150 | 28 | 1.1571 | 9 | 0.3543 | 9 | 0.3543 | 0.3 | 0.012 | 4160 | 1780 | 0.0303 |
| 639 | 9 | 0.3543 | 30 | 1.1811 | 10 | 0.3937 | 10 | 0.3937 | 0.6 | 0.571 | 5120 | 2390 | 0.571 |
| 6300 | 10 | 0.3937 | 35 | 1.3780 | 11 | 0.4331 | 11 | 0.4331 | 0.6 | 0.571 | 7640 | 3470 | 0.571 |
| 6301 | 12 | 0.4724 | 37 | 1.4567 | 12 | 0.4724 | 12 | 0.4724 | 1 | 0.039 | 9700 | 4190 | 0.0600 |
| 6302 | 15 | 0.5906 | 42 | 1.6535 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.039 | 11400 | 5430 | 0.0820 |
| 6303 | 17 | 0.6693 | 47 | 1.8504 | 14 | 0.5512 | 14 | 0.5512 | 1 | 0.039 | 13580 | 6580 | 0.1150 |
| 6304 | 20 | 0.7874 | 52 | 2.0742 | 15 | 0.5906 | 15 | 0.5906 | 1.1 | 0.043 | 15940 | 7880 | 0.1490 |
| 6305 | 25 | 0.9843 | 62 | 2.4409 | 17 | 0.6693 | 17 | 0.6693 | 1.1 | 0.043 | 22380 | 11490 | 0.2320 |
| 6306 | 30 | 1.1811 | 72 | 2.8346 | 19 | 0.7480 | 19 | 0.7480 | 1.1 | 0.043 | 27000 | 15200 | 0.3490 |
| 63/22 | 22 | 0.8661 | 56 | 2.2047 | 16 | 0.6299 | 16 | 0.6299 | 1.1 | 0.043 | 18400 | 9250 | 0.1760 |
| 63/28 | 28 | 1.1571 | 68 | 2.6772 | 18 | 0.7087 | 18 | 0.7087 | 1.1 | 0.043 | 26800 | 14000 | 0.2870 |
| 63/32 | 32 | 1.2598 | 75 | 2.9528 | 20 | 0.7874 | 20 | 0.7874 | 1.1 | 0.043 | 30000 | 16200 | 0.3820 |
| No. | Size | Rated load | Weight | ||||||||||
| Inner Diameter | Out Diameter | Width (B) | Chamfering | Dynamic | Static | ||||||||
| d | D | Open Type | Shielded Type | rsmin (r) | Cr | Cr | Close | ||||||
| mm | inch | mm | inch | mm | inch | mm | inch | mm | inch | N | N | KG | |
| 683 | 3 | 0.1181 | 7 | 0.2756 | 2 | 0.0787 | 3 | 0.1181 | 0.1 | 0.004 | 420 | 135 | 0.571 |
| 684 | 4 | 0.1575 | 9 | 0.3543 | 2.5 | 0.0984 | 4 | 0.1575 | 0.1 | 0.004 | 480 | 170 | 0.571 |
| 685 | 5 | 0.1969 | 11 | 0.4331 | 3 | 0.1181 | 5 | 0.1969 | 0.15 | 0.006 | 770 | 320 | 0.0019 |
| 686 | 6 | 0.2362 | 13 | 0.5118 | 3.5 | 0.1378 | 5 | 0.1969 | 0.15 | 0.006 | 1080 | 440 | 0.0571 |
| 687 | 7 | 0.2756 | 14 | 0.5512 | 3.5 | 0.1378 | 5 | 0.1969 | 0.15 | 0.006 | 1170 | 510 | 0.0030 |
| 688 | 8 | 0.3150 | 16 | 0.6299 | 4 | 0.1575 | 5 | 0.1969 | 0.2 | 0.008 | 1250 | 590 | 0.0038 |
| 689 | 9 | 0.3543 | 17 | 0.6693 | 4 | 0.1575 | 5 | 0.1969 | 0.2 | 0.008 | 1330 | 660 | 0.0440 |
| 6800 | 10 | 0.3937 | 19 | 0.7480 | 5 | 0.1969 | 5 | 0.1969 | 0.3 | 0.012 | 1590 | 750 | 0.0050 |
| 6801 | 12 | 0.4724 | 21 | 0.8268 | 5 | 0.1969 | 5 | 0.1969 | 0.3 | 0.012 | 1910 | 1040 | 0.0060 |
| 6802 | 15 | 0.5906 | 24 | 0.9449 | 5 | 0.1969 | 5 | 0.1969 | 0.3 | 0.012 | 2070 | 1250 | 0.0070 |
| 6803 | 17 | 0.6693 | 26 | 1.5716 | 5 | 0.1969 | 5 | 0.1969 | 0.3 | 0.012 | 2130 | 1360 | 0.0080 |
| 6804 | 20 | 0.7874 | 32 | 1.2598 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 3480 | 2230 | 0.0190 |
| 6805 | 25 | 0.9843 | 37 | 1.4567 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 3680 | 2630 | 0.5710 |
| 6806 | 30 | 1.1811 | 42 | 1.6535 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 4000 | 3150 | 0.0260 |
| 6807 | 35 | 1.3780 | 47 | 1.8504 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 4270 | 3600 | 0.5710 |
| 6808 | 40 | 1.5748 | 52 | 2.571 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 4410 | 3890 | 0.0330 |
| 6809 | 45 | 1.7717 | 58 | 2.2835 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 4590 | 4330 | 0.0400 |
| 6810 | 50 | 1.9685 | 65 | 2.5591 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 6610 | 6080 | 0.0520 |
| 6811 | 55 | 2.1654 | 72 | 2.3846 | 9 | 0.3543 | 9 | 0.3543 | 0.3 | 0.012 | 8530 | 8080 | 0. 0571 |
| 6812 | 60 | 2.3622 | 78 | 3.0709 | 10 | 0.3937 | 10 | 0.3937 | 0.3 | 0.012 | 9200 | 8760 | 0.1060 |
| 6813 | 65 | 2.5591 | 85 | 3.3465 | 10 | 0.3937 | 10 | 0.3937 | 0.6 | 0.571 | 1571 | 9420 | 0.1250 |
| 6814 | 70 | 2.7559 | 90 | 3.5433 | 10 | 0.3937 | 10 | 0.3937 | 0.6 | 0.571 | 1571 | 10090 | 0.1350 |
| 6815 | 75 | 2.9528 | 95 | 3.7402 | 10 | 0.3937 | 10 | 0.3937 | 0.6 | 0.571 | 11230 | 1571 | 0.1450 |
| 6816 | 80 | 3.1496 | 100 | 3.9370 | 10 | 0.3937 | 10 | 0.3937 | 0.6 | 0.571 | 11320 | 11080 | 0.1550 |
| 6817 | 85 | 3.3465 | 110 | 4.3307 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.039 | 17599 | 18300 | 0.2650 |
| 6818 | 90 | 3.5433 | 115 | 4.5276 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.039 | 17853 | 18961 | 0.2800 |
| No. | Size | Rated load | Weight | ||||||||||
| Inner Diameter | Out Diameter | Width (B) | Chamfering | Dynamic | Static | ||||||||
| d | D | Open Type | Shielded Type | rsmin (r) | Cr | Cr | Close | ||||||
| mm | inch | mm | inch | mm | inch | mm | inch | mm | inch | N | N | KG | |
| 6819 | 95 | 3.7402 | 120 | 4.7244 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.0390 | 18089 | 19616 | 0.2980 |
| 6820 | 100 | 3.9370 | 125 | 4.9213 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.0390 | 18340 | 20266 | 0.3110 |
| 6821 | 105 | 4.1339 | 130 | 5.1181 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.0390 | 18912 | 20924 | 0.3250 |
| 6822 | 110 | 4.3307 | 140 | 5.5118 | 16 | 0.6299 | 16 | 0.6299 | 1 | 0.0390 | 28100 | 30700 | 0.5100 |
| 6824 | 120 | 4.7244 | 150 | 5.9055 | 16 | 0.6299 | 16 | 0.6299 | 1 | 0.0390 | 28900 | 32900 | 0.5490 |
| 6826 | 130 | 5.1181 | 165 | 6.4961 | 18 | 0.7087 | 18 | 0.7087 | 1.1 | 0.0430 | 37900 | 42900 | 0.7900 |
| 6828 | 140 | 5.1181 | 175 | 6.8898 | 18 | 0.7087 | 18 | 0.7087 | 1 | 0. 0571 | 38200 | 44300 | 0.9900 |
| 6830 | 150 | 5.9055 | 190 | 7.4803 | 20 | 0.7874 | 20 | 0.7874 | 1 | 0. 0571 | 49100 | 57100 | 1.5000 |
| 6832 | 160 | 6.2992 | 200 | 7.8740 | 20 | 0.7874 | 20 | 0.7874 | 1 | 0. 0571 | 49600 | 59100 | 1.7000 |
| 6834 | 170 | 6.6929 | 215 | 8.4646 | 22 | 0.8661 | 22 | 0.8661 | 1 | 0. 0571 | 61500 | 73300 | 1.9000 |
| 6836 | 180 | 7.0866 | 225 | 8.8582 | 22 | 0.8661 | 22 | 0.8661 | 1 | 0. 0571 | 62300 | 75900 | 2.0000 |
| 6838 | 190 | 7.4803 | 240 | 9.4480 | 24 | 0.9449 | 24 | 0.9449 | 1.5 | 0.0590 | 75100 | 91600 | 2.1000 |
| 6840 | 200 | 7.8740 | 250 | 9.8425 | 24 | 0.9449 | 24 | 0.9449 | 1.5 | 0.0590 | 74200 | 91200 | 2.3800 |
| 6844 | 220 | 8.6614 | 270 | 10.6299 | 24 | 0.9499 | – | – | 1.5 | 0.0590 | 76400 | 97800 | 2.7900 |
| 6848 | 240 | 9.4488 | 300 | 11.8110 | 28 | 1.1571 | – | – | 2 | 0.0787 | 83500 | 108000 | 4.5000 |
| 6852 | 260 | 10.2362 | 320 | 12.5984 | 28 | 1.1571 | – | – | 2 | 0.0787 | 95000 | 128000 | 4.8500 |
| 6856 | 280 | 11.5716 | 350 | 13.7795 | 33 | 1.2992 | – | – | 2 | 0.0787 | 135000 | 178000 | 7.6000 |
| 6860 | 300 | 11.8110 | 380 | 14.9606 | 38 | 1.4960 | – | – | 2 | 0.0787 | 162000 | 222000 | 11.0000 |
| 6864 | 320 | 12.5984 | 400 | 15.7480 | 38 | 1.4960 | – | – | 2 | 0.0787 | 168000 | 235000 | 12.0000 |
| 6872 | 360 | 14.1732 | 440 | 17.3228 | 38 | 1.4960 | – | – | 2.5 | 0.0984 | – | – | 12.2000 |
| 6876 | 380 | 14.9606 | 480 | 18.8976 | 46 | 1.8110 | – | – | 2.5 | 0.0984 | 168000 | 235000 | 20.5000 |
| 6880 | 400 | 15.7480 | 500 | 19.6850 | 46 | 1.8110 | – | – | 2.5 | 0.0984 | – | – | 21.7000 |
| 6884 | 420 | 16.5354 | 520 | 20.4724 | 46 | 1.8110 | – | – | 2.5 | 0.1377 | 251000 | 425000 | 22.0000 |
| 6888 | 440 | 17.3228 | 540 | 21.2598 | 46 | 1.8110 | – | – | 2.5 | 0.0984 | – | – | 24.0000 |
| 6892 | 460 | 18.1102 | 580 | 22.8346 | 56 | 2.2047 | – | – | 3 | 0.1181 | – | – | 33.5000 |
| No. | Size | Rated load | Weight | ||||||||||
| Inner Diameter | Out Diameter | Width (B) | Chamfering | Dynamic | Static | ||||||||
| d | D | Open Type | Shielded Type | rsmin (r) | Cr | Cr | Close | ||||||
| mm | inch | mm | inch | mm | inch | mm | inch | mm | inch | N | N | KG | |
| 693 | 3 | 0.1181 | 8 | 0.3150 | 3 | 0.1181 | 4 | 0.1575 | 0.15 | 0.006 | 430 | 170 | 0.0008 |
| 694 | 4 | 0.1575 | 11 | 0.4331 | 4 | 0.1575 | 4 | 0.1575 | 0.15 | 0.006 | 960 | 350 | 0.0017 |
| 695 | 5 | 0.1969 | 13 | 0.5118 | 4 | 0.1575 | 4 | 0.1575 | 0.2 | 0.008 | 1070 | 420 | 0.571 |
| 696 | 6 | 0.2362 | 15 | 0.5906 | 5 | 0.1969 | 5 | 0.1969 | 0.2 | 0.008 | 1470 | 600 | 0.0036 |
| 697 | 7 | 0.2756 | 17 | 0.6693 | 5 | 0.1969 | 5 | 0.1969 | 0.3 | 0.012 | 1600 | 710 | 0.0050 |
| 698 | 8 | 0.3150 | 19 | 0.7480 | 6 | 0.2362 | 6 | 0.2362 | 0.3 | 0.012 | 2230 | 910 | 0.0076 |
| 699 | 9 | 0.3543 | 20 | 0.7874 | 6 | 0.2362 | 6 | 0.2362 | 0.3 | 0.012 | 2480 | 1090 | 0.0085 |
| 6900 | 10 | 0.3937 | 22 | 0.8661 | 6 | 0.2362 | 6 | 0.2362 | 0.3 | 0.012 | 2690 | 1270 | 0.5710 |
| 6901 | 12 | 0.4724 | 24 | 0.9449 | 6 | 0.2362 | 6 | 0.2362 | 0.3 | 0.012 | 2890 | 1460 | 0.0120 |
| 6902 | 15 | 0.5906 | 28 | 1.1571 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 4320 | 2250 | 0.0180 |
| 6903 | 17 | 0.6693 | 30 | 1.1811 | 7 | 0.2756 | 7 | 0.2756 | 0.3 | 0.012 | 4590 | 2550 | 0.0190 |
| 6904 | 20 | 0.7874 | 37 | 1.4567 | 9 | 0.3543 | 9 | 0.3543 | 0.3 | 0.012 | 6370 | 3680 | 0.0380 |
| 6905 | 25 | 0.9843 | 42 | 1.6535 | 9 | 0.3543 | 9 | 0.3543 | 0.3 | 0.012 | 6660 | 4180 | 0.0440 |
| 6906 | 30 | 1.1811 | 47 | 1.8504 | 9 | 0.3543 | 9 | 0.3543 | 0.3 | 0.012 | 7240 | 5571 | 0.0500 |
| 6907 | 35 | 1.3780 | 55 | 2.1654 | 10 | 0.3543 | 10 | 0.3937 | 0.6 | 0.571 | 10390 | 7160 | 0.7500 |
| 6908 | 40 | 1.5748 | 62 | 2.4409 | 12 | 0.3937 | 12 | 0.4724 | 0.6 | 0.571 | 13571 | 9200 | 0.1180 |
| 6909 | 45 | 1.7717 | 68 | 2.6772 | 12 | 0.4724 | 12 | 0.4724 | 0.6 | 0.571 | 13490 | 10130 | 0.1280 |
| 6910 | 50 | 1.9685 | 72 | 2.8346 | 12 | 0.4724 | 12 | 0.4724 | 0.6 | 0.571 | 13900 | 1571 | 0.1330 |
| 6911 | 55 | 2.1654 | 80 | 3.1496 | 13 | 0.4724 | 13 | 0.5118 | 1 | 0.039 | 14820 | 12690 | 0.1770 |
| 6912 | 60 | 2.3622 | 85 | 3.3465 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.039 | 15080 | 13480 | 0.1910 |
| 6913 | 65 | 2.5591 | 90 | 3.5433 | 13 | 0.5118 | 13 | 0.5118 | 1 | 0.039 | 19950 | 17490 | 0.2000 |
| 6914 | 70 | 2.7559 | 100 | 3.9370 | 16 | 0.6299 | 16 | 0.6299 | 1 | 0.039 | 25950 | 21850 | 0.3270 |
| 6915 | 75 | 2.9528 | 105 | 4.1339 | 16 | 0.6299 | 16 | 0.6299 | 1 | 0.039 | 26780 | 23560 | 0.3450 |
| 6916 | 80 | 3.1496 | 110 | 4.3307 | 16 | 0.6299 | 16 | 0.6299 | 1 | 0.039 | 27590 | 25280 | 0.3630 |
| 6917 | 85 | 3.3465 | 120 | 4.7244 | 18 | 0.7087 | 18 | 0.7087 | 1.1 | 0.043 | 31900 | 29700 | 0.5170 |
Product Applications
Company Profile
ZheJiang Jieyi Bearing Co., Ltd. is a more than 10-year history of bearing trading company. We are located in the biggest bearing town in China–Yiandian Town.
Our products include: Deep Groove Ball Bearings, Self-aligning Ball Bearings, Spherical Bearings, Tapered Roller Bearings, Cylindrical Roller Bearings, Needle Roller Bearings, Self-aligning Roller Bearings, Angular Contact Ball Bearings, Thrust Ball Bearings, Trust Roller Bearings and Special Bearings.
Jieyi Bearing has advanced quality testing and inspecting equipment, to guarantee product quality meets customers’ demand. Annually our company′ S export over 10 million dollars.
To service dear customers at the fastest speed, we built a great Warehouse to stock bearings, so as to ship your required bearings fast. Inside of the bearing warehouse, there is all sourcing of bearing stock, with all kinds of bearings, over 10000 types.
Jieyi Bearing also provides OEM service, such as bearing quality, noise level, grease brand, packing method, etc. We have enough OEM experience, and have a complete OEM manual for customer reference.
Products have been selling well in the American, French, Spanish, Austria, Italian, the U. A. E. Saudi, Pakistan, India, and Brizal markets.
With over 10 years′ Experience in bearings market, Jieyi Bearing have built up good relationship with all of our customers and quality factory. We always get satisfactory feedback from our customers because of the high quality products and good OEM service. We always supply the quality, stable, economical bearings and proper technical services.
Welcome to people of various enterprises with advance!
Our Advantages
WHY CHOOSE US?
1. BETTER COMMUNICATION
JVZB Bearing understands customer service more so than factories, we focus entirely on the customer so it is often easier to communicate with you.
2. FAVORABLE PRICING
JVZB Beaing often uses factories that are not big enough to have their own international sales team or export license. This means: we can work with factories that have lower prices than some easy-to-find competitors online.
3. LOW MOQ
We have great relationships with factories or have product stock on hand, CZPT to offer lower order quantities for the small sized importer.
4. SUPPLIER VERIFICATION
JVZB Bearing have more than 10 years of long-standing relationships with the factories, so we are aware of the capabilities of each. If you need, we can visit the factory to carry out product inspections and check up on an order.
5. QC CONTROL
JVZB Bearing have our own quality inspection laboratory with advanced testing equipment, we are CZPT to reasonably ensure the quality of the finished products.
6. MULTIPLE VARIETY PURCHASE
In fact, bearing factories usually only produce 1 type of bearing, or even focus on producing several models. If you want multiple items sourced for 1 product, we can help. This is a great way to source more products and do so quickly and efficiently.
7. OEM or OEM SERVICE
If you need special package or special labeling, we are glad to support OEM or OEM service.
Product List
Deeo Groove Ball Bearing
Spherical Roller Bearing
Taper Roller Bearing
Needle Roller Bearing
Pillow Block Bearing
Ceramic Bearing
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Rolling Body: | Ball Bearings |
|---|---|
| The Number of Rows: | Single |
| Outer Dimension: | Small (28-55mm) |
| Samples: |
US$ 0.1/Piece
1 Piece(Min.Order) | Order Sample Ball bearings
|
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Are there Specific Maintenance Practices to Ensure the Longevity of Ball Bearings?
Maintaining ball bearings is essential to ensure their longevity, reliable performance, and prevent premature failure. Proper maintenance practices can extend the lifespan of ball bearings and the equipment they are used in. Here are specific maintenance practices to consider:
- Regular Lubrication:
Implement a regular lubrication schedule using the appropriate lubricant for the application. Lubrication reduces friction, prevents wear, and helps dissipate heat. Follow manufacturer guidelines for lubricant type, quantity, and frequency.
- Clean Environment:
Keep the operating environment clean and free from contaminants. Dust, dirt, and debris can infiltrate bearings and cause damage. Use seals or shields to protect bearings from contaminants, especially in harsh environments.
- Proper Installation:
Ensure correct installation of bearings using proper tools and techniques. Improper installation can lead to misalignment, uneven load distribution, and premature wear. Follow manufacturer recommendations for installation procedures.
- Regular Inspections:
Perform routine visual inspections to check for signs of wear, damage, or contamination. Regular inspections can help identify issues early and prevent further damage. Pay attention to noise, vibration, and temperature changes.
- Temperature Monitoring:
Monitor bearing temperatures during operation using infrared thermometers or sensors. Abnormal temperature increases can indicate inadequate lubrication, misalignment, or other problems.
- Correct Handling:
Handle bearings with care to prevent damage during storage, transportation, and installation. Avoid dropping or subjecting them to impacts that can affect their internal components.
- Bearing Removal and Replacement:
Follow proper procedures when removing and replacing bearings. Use appropriate tools and techniques to avoid damage to the bearing or the surrounding components.
- Alignment Maintenance:
Maintain proper shaft and housing alignment to prevent excessive loads and wear on the bearing. Misalignment can lead to increased stress and premature failure.
- Training and Education:
Provide training to operators and maintenance personnel on proper bearing maintenance and handling practices. Educated personnel are more likely to identify issues and perform maintenance correctly.
- Documented Records:
Keep records of maintenance activities, inspections, lubrication schedules, and any issues encountered. This documentation helps track the bearing’s performance over time and informs future maintenance decisions.
By implementing these maintenance practices, you can ensure the longevity of ball bearings, minimize downtime, reduce operational costs, and maintain the reliability of the equipment they are a part of.
What Precautions should be taken to Prevent Contamination of Ball Bearings in Industrial Settings?
Preventing contamination of ball bearings is essential to ensure their proper function, longevity, and overall performance in industrial settings. Contaminants such as dust, dirt, debris, and particles can significantly impact bearing operation. Here are important precautions to take to prevent contamination of ball bearings:
- Effective Sealing:
Choose ball bearings with appropriate seals or shields to prevent the ingress of contaminants. Seals provide a physical barrier against dust, moisture, and particles, ensuring the bearing’s interior remains clean.
- Clean Environment:
Maintain a clean working environment around the machinery and equipment. Regularly clean the surrounding areas to prevent the accumulation of dirt and debris that could enter the bearings.
- Proper Handling:
Handle bearings with clean hands and use gloves if necessary. Avoid touching the bearing surfaces with bare hands, as natural skin oils can transfer contaminants onto the bearing.
- Clean Tools and Equipment:
Use clean tools and equipment during installation and maintenance to prevent introducing contaminants. Ensure that tools are properly cleaned before coming into contact with the bearing components.
- Contamination-Controlled Workstations:
Establish contamination-controlled workstations for bearing handling, installation, and maintenance. These areas should have proper ventilation, filtered air, and minimal exposure to external contaminants.
- Proper Lubrication:
Use the correct lubricant in appropriate quantities. Lubricants help create a barrier against contaminants and reduce friction. Regularly inspect and replenish lubrication to maintain its effectiveness.
- Regular Inspections:
Implement a routine inspection schedule to monitor the condition of the bearings. Look for signs of contamination, wear, and damage. Address any issues promptly to prevent further damage.
- Training and Education:
Train personnel on proper handling, installation, and maintenance practices to minimize the risk of contamination. Educated employees are more likely to take precautions and prevent accidental contamination.
- Environmental Controls:
In sensitive environments, such as clean rooms or medical facilities, implement strict environmental controls to minimize the presence of contaminants that could affect bearing performance.
- Regular Cleaning and Maintenance:
Perform regular cleaning and maintenance of machinery and equipment to prevent the buildup of contaminants. Keep bearings protected during maintenance to prevent debris from entering during the process.
- Selection of Suitable Bearings:
Choose bearings that are specifically designed for the application’s environmental conditions. Some bearings have advanced sealing options or specialized coatings that enhance contamination resistance.
By implementing these precautions, industries can significantly reduce the risk of contamination in ball bearings, ensuring smooth operation, extended bearing life, and enhanced equipment reliability.
How does Lubrication Impact the Performance and Lifespan of Ball Bearings?
Lubrication plays a critical role in the performance and lifespan of ball bearings. Proper lubrication ensures smooth operation, reduces friction, minimizes wear, and prevents premature failure. Here’s how lubrication impacts ball bearings:
- Friction Reduction:
Lubrication creates a thin film between the rolling elements (balls) and the raceways of the bearing. This film reduces friction by separating the surfaces and preventing direct metal-to-metal contact. Reduced friction results in lower energy consumption, heat generation, and wear.
- Wear Prevention:
Lubricants create a protective barrier that prevents wear and damage to the bearing’s components. Without proper lubrication, the repeated rolling and sliding of the balls against the raceways would lead to accelerated wear, surface pitting, and eventual failure.
- Heat Dissipation:
Lubricants help dissipate heat generated during operation. The rolling elements and raceways can generate heat due to friction. Adequate lubrication carries away this heat, preventing overheating and maintaining stable operating temperatures.
- Corrosion Resistance:
Lubrication prevents moisture and contaminants from coming into direct contact with the bearing’s surfaces. This helps protect the bearing against corrosion, rust, and the formation of debris that can compromise its performance and longevity.
- Noise Reduction:
Lubricated ball bearings operate quietly because the lubricant cushions and dampens vibrations caused by the rolling motion. This noise reduction is crucial in applications where noise levels need to be minimized.
- Seal Protection:
Lubricants help maintain the effectiveness of seals or shields that protect the bearing from contaminants. They create a barrier that prevents particles from entering the bearing and causing damage.
- Improved Efficiency:
Properly lubricated ball bearings operate with reduced friction, leading to improved overall efficiency. This is especially important in applications where energy efficiency is a priority.
- Lifespan Extension:
Effective lubrication significantly extends the lifespan of ball bearings. Bearings that are properly lubricated experience less wear, reduced fatigue, and a lower likelihood of premature failure.
- Selection of Lubricant:
Choosing the right lubricant is essential. Factors such as speed, temperature, load, and environmental conditions influence the choice of lubricant type and viscosity. Some common lubricant options include grease and oil-based lubricants.
- Regular Maintenance:
Regular lubrication maintenance is crucial to ensure optimal bearing performance. Bearings should be inspected and relubricated according to manufacturer recommendations and based on the application’s operating conditions.
In summary, proper lubrication is essential for the optimal performance, longevity, and reliability of ball bearings. It reduces friction, prevents wear, dissipates heat, protects against corrosion, and contributes to smooth and efficient operation in various industrial and mechanical applications.
editor by CX 2024-05-14
China Professional High-Speed Capability 71918 Acd/P4a – Single Row Angular Contact Ball Bearing with high quality
Product Description
71918 ACD/P4A – Single row angular contact ball bearing Introduction:Angular contact ball bearings are specialized types of bearings designed to support both radial and axial loads simultaneously. And they are versatile components known for their ability to support combined radial and axial loads, making them essential in a wide range of mechanical systems and machinery.
71918 ACD/P4A – Single row angular contact ball bearing key features and application:
-
Construction: Angular contact ball bearings typically consist of an inner ring, an outer ring, a cage (or separator), and rows of balls. The inner and outer rings have raceways, while the balls are positioned between them.
-
Contact Angle: Unlike deep groove ball bearings, which have a contact angle of 0°, angular contact ball bearings have a contact angle, usually between 15° and 40°. This angle allows them to support axial loads in addition to radial loads.
-
Types: Angular contact ball bearings come in several configurations, including single-row, double-row, and four-point contact bearings. Single-row bearings can accommodate axial loads in 1 direction, while double-row bearings can handle axial loads in both directions.
-
Preload: To optimize performance, angular contact ball bearings may be preloaded during installation. Preload applies a slight internal load to the bearings, which helps eliminate play and improve rigidity.
-
High-Speed Capability: Angular contact ball bearings are capable of operating at high speeds due to their design, which reduces friction and heat generation.
-
Applications: These bearings are commonly used in various industries, including automotive, aerospace, machine tooling, and robotics. They are suitable for applications such as wheel hubs, electric motors, pumps, and gearboxes, where both radial and axial loads are present.
-
Sealing Options: Depending on the application requirements, angular contact ball bearings may come with different sealing options, such as shields or seals, to protect against contaminants and retain lubrication.
71918 ACD/P4A – Single row angular contact ball bearing Display:
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Contact Angle: | 25° |
|---|---|
| Aligning: | Aligning Bearing |
| Separated: | Unseparated |
| Rows Number: | Single |
| Load Direction: | Thrust Bearing |
| Material: | Bearing Steel |
| Samples: |
US$ 10/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can you Provide Examples of Industries where Ball Bearings are Crucial Components?
Ball bearings are essential components in a wide range of industries where smooth motion, load support, and precision are vital. Here are some examples of industries where ball bearings play a crucial role:
- Automotive Industry:
Ball bearings are used in various automotive applications, including wheel hubs, transmissions, engines, steering systems, and suspension components. They provide reliable rotation and support in both passenger vehicles and commercial vehicles.
- Aerospace Industry:
In the aerospace sector, ball bearings are found in aircraft engines, landing gear systems, control surfaces, and avionics equipment. Their ability to handle high speeds and precision is vital for aviation safety.
- Industrial Machinery:
Ball bearings are integral to a wide range of industrial machinery, including pumps, compressors, conveyors, machine tools, printing presses, and textile machinery. They facilitate smooth operation and load distribution in these diverse applications.
- Medical Equipment:
In medical devices and equipment, ball bearings are used in surgical instruments, imaging equipment, dental tools, and laboratory machinery. Their precision and smooth movement are crucial for accurate diagnostics and treatments.
- Robotics and Automation:
Ball bearings are key components in robotic arms, automation systems, and manufacturing machinery. They enable precise movement, high-speed operation, and reliable performance in automated processes.
- Renewable Energy:
Wind turbines and solar tracking systems utilize ball bearings to enable efficient rotation and tracking of the wind blades and solar panels. Ball bearings withstand the dynamic loads and environmental conditions in renewable energy applications.
- Marine and Shipbuilding:
Ball bearings are used in marine applications such as ship propulsion systems, steering mechanisms, and marine pumps. They withstand the corrosive environment and provide reliable performance in maritime operations.
- Heavy Equipment and Construction:
In construction machinery like excavators, bulldozers, and cranes, ball bearings support the movement of heavy loads and enable efficient operation in demanding environments.
- Electronics and Consumer Appliances:
Consumer electronics like electric motors, computer hard drives, and household appliances rely on ball bearings for smooth motion and reliable operation.
- Oil and Gas Industry:
In oil and gas exploration and extraction equipment, ball bearings are used in drilling rigs, pumps, and processing machinery. They handle the high loads and harsh conditions of this industry.
These examples demonstrate how ball bearings are indispensable components in various industries, contributing to the efficiency, reliability, and functionality of diverse mechanical systems and equipment.
What Precautions should be taken to Prevent Contamination of Ball Bearings in Industrial Settings?
Preventing contamination of ball bearings is essential to ensure their proper function, longevity, and overall performance in industrial settings. Contaminants such as dust, dirt, debris, and particles can significantly impact bearing operation. Here are important precautions to take to prevent contamination of ball bearings:
- Effective Sealing:
Choose ball bearings with appropriate seals or shields to prevent the ingress of contaminants. Seals provide a physical barrier against dust, moisture, and particles, ensuring the bearing’s interior remains clean.
- Clean Environment:
Maintain a clean working environment around the machinery and equipment. Regularly clean the surrounding areas to prevent the accumulation of dirt and debris that could enter the bearings.
- Proper Handling:
Handle bearings with clean hands and use gloves if necessary. Avoid touching the bearing surfaces with bare hands, as natural skin oils can transfer contaminants onto the bearing.
- Clean Tools and Equipment:
Use clean tools and equipment during installation and maintenance to prevent introducing contaminants. Ensure that tools are properly cleaned before coming into contact with the bearing components.
- Contamination-Controlled Workstations:
Establish contamination-controlled workstations for bearing handling, installation, and maintenance. These areas should have proper ventilation, filtered air, and minimal exposure to external contaminants.
- Proper Lubrication:
Use the correct lubricant in appropriate quantities. Lubricants help create a barrier against contaminants and reduce friction. Regularly inspect and replenish lubrication to maintain its effectiveness.
- Regular Inspections:
Implement a routine inspection schedule to monitor the condition of the bearings. Look for signs of contamination, wear, and damage. Address any issues promptly to prevent further damage.
- Training and Education:
Train personnel on proper handling, installation, and maintenance practices to minimize the risk of contamination. Educated employees are more likely to take precautions and prevent accidental contamination.
- Environmental Controls:
In sensitive environments, such as clean rooms or medical facilities, implement strict environmental controls to minimize the presence of contaminants that could affect bearing performance.
- Regular Cleaning and Maintenance:
Perform regular cleaning and maintenance of machinery and equipment to prevent the buildup of contaminants. Keep bearings protected during maintenance to prevent debris from entering during the process.
- Selection of Suitable Bearings:
Choose bearings that are specifically designed for the application’s environmental conditions. Some bearings have advanced sealing options or specialized coatings that enhance contamination resistance.
By implementing these precautions, industries can significantly reduce the risk of contamination in ball bearings, ensuring smooth operation, extended bearing life, and enhanced equipment reliability.
How do Ball Bearings Differ from Other Types of Bearings like Roller Bearings?
Ball bearings and roller bearings are two common types of rolling-element bearings, each with distinct designs and characteristics. Here’s a comparison of ball bearings and roller bearings:
- Design:
Ball Bearings: Ball bearings use spherical balls to separate and reduce friction between the bearing’s inner and outer rings. The balls enable rolling motion and smooth contact, minimizing friction.
Roller Bearings: Roller bearings, as the name suggests, use cylindrical or tapered rollers instead of balls. These rollers have larger contact areas, distributing loads over a broader surface.
- Friction and Efficiency:
Ball Bearings: Due to the point contact between the balls and the rings, ball bearings have lower friction and are more efficient at high speeds.
Roller Bearings: Roller bearings have a larger contact area, resulting in slightly higher friction compared to ball bearings. They are more suitable for heavy-load applications where efficiency is prioritized over high speeds.
- Load Capacity:
Ball Bearings: Ball bearings excel at handling light to moderate loads in both radial and axial directions. They are commonly used in applications where smooth rotation and low friction are important.
Roller Bearings: Roller bearings have a higher load-carrying capacity than ball bearings. They can support heavier radial and axial loads and are preferred for applications with significant loads or impact forces.
- Variability:
Ball Bearings: Ball bearings come in various designs, including deep groove, angular contact, and thrust ball bearings, each suitable for different applications.
Roller Bearings: Roller bearings have diverse types, including cylindrical, spherical, tapered, and needle roller bearings, each optimized for specific load and motion requirements.
- Speed Capability:
Ball Bearings: The reduced friction in ball bearings makes them suitable for high-speed applications, such as electric motors and precision machinery.
Roller Bearings: Roller bearings can handle higher loads but are generally better suited for moderate to low speeds due to slightly higher friction.
- Applications:
Ball Bearings: Ball bearings are used in applications where smooth motion, low friction, and moderate loads are essential, such as electric fans, bicycles, and some automotive components.
Roller Bearings: Roller bearings find applications in heavy machinery, construction equipment, automotive transmissions, and conveyor systems, where heavier loads and durability are crucial.
In summary, ball bearings and roller bearings differ in their design, friction characteristics, load capacities, speed capabilities, and applications. The choice between them depends on the specific requirements of the machinery and the type of loads and forces involved.
editor by CX 2024-05-09
China Best Sales Single Row Ball Bearings Pillow Block Bearing UCFL201 Sizes supplier
Product Description
Single row ball bearings pillow block bearing UCFL201 SIZES
Product Description:
Pillow block bearings is actually a variant of deep groove ball bearings, is characterized by its outer diameter surface of the sphere, you can play with the corresponding inner concave spherical bearing self-aligning effct.
| Type | Pillow Block Bearing |
| Bearing Item | UCFL200 UCFL300 |
| Insert bearing | UC200,UC300,SA200,SB200,UK200,SER200 |
| Bearing materia | 100% chrome steel GCR-15 |
| Housing materia | Cast iron,stainless steel, plastic resin |
| Row number | Single row bearing |
| UCP204 UCP205 UCP206 UCP207 UCP208 UCP209 UCP210 UCP211 UCP212 UCP213 UCP214 UCP215 UCP216 UCP217 UCP218 |
UCFL204 UCFL205 UCFL206 UCFL207 UCFL208 UCFL209 UCFL210 UCFL211 UCFL212 UCFL213 UCFL214 UCFL215 UCFL216 UCFL217 UCFL218 |
UCF204 UCF205 UCF206 UCF207 UCF208 UCF209 UCF210 UCF211 UCF212 UCF213 UC214 UCF215 UCF216 UC217 UCF218 |
UCFC204 UCFC205 UCFC206 UCFC207 UCFC208 UCFC209 UCFC210 UCFC211 UCFC212 UCFC213 UCFC214 UCFC215 UCFC216 UCFC217 UCFC218 |
UCT204 UCT205 UCT206 UCT207 UCT208 UCT209 UCT210 UCT211 UCT212 UCT213 UCT214 UCT215 UCT216 UCT217 UCT218 |
UCPA204 UCPA205 UCPA206 UCPA207 UCPA208 UCPA209 UCPA210 UCPA211 UCPA212 UCPA213 UCPA214 UCPA215 UCPA216 UCPA217 UCPA218 |
UCHA204 UCHA205 UCHA206 UCHA207 UCHA208 UCHA209 UCHA210 UCHA211 UCHA212 UCHA213 UCHA214 UCHA215 UCHA216 UCHA217 UCHA218 |
UC204 UC205 UC206 UC207 UC208 UC209 UC210 UC211 UC212 UC213 UC214 UC215 UC216 UC217 UC218 |
SA/SB/UK204 SA/SB/UK205 SA/SB/UK206 SA/SB/UK207 SA/SB/UK208 SA/SB/UK209 SA/SB/UK210 SA/SB/UK211 SA/SB/UK212 SA/SB/UK213 SA/SB/UK214 SA/SB/UK215 SA/SB/UK216 SA/SB/UK217 SA/SB/UK218 |
Pillow block bearing mainly used to bearadical load mainly radial and axial joint load, generally should not alone bear the axial load ,such a bearing inner and outer ring can be installed separately.
Company information:
Guanxian Xinyan Pillow Block Bearing Co.,ltd. is based in ZheJiang (CHINA) since 2011 and is 1 of the biggest authorized manufactures and exporters of bearing. We’ve been dedicated to provide all types of hiigh quality bearings to OEM, Retailers and traders throughout international market since the moment established. Pillow block bearings, bearings housing,insert bearings and deep groove ball bearings are all we specialized. We are also developing nonstandard bearings as per the drawings from customers.
Up to now, we have exported our goods to Italy, Brazil, Argentina, Poland, India, Pakistan, Bangladesh,Thailand etc. First class service, efficient delivery methods, the most competitive quality-price ratio, we dedicated to provide you quality brand bearings. Sincerely welcome new and old customers visit and build cooperation.
Packing :
Single box + cartons + pallets or as your requirements.
Shipping:
By Air / By Sea /By Express
a. For small weight or Urgent, goods will be delivery
by Express DHL/FedEX/UPS/TNT/EMS
b.For max production,goods will be shipped by sea/by air.
c.According to your requirements
FAQ:
Why choose BXY?
Quality, loyalty and service is our faith!
Deemed continuous improvement as our permanent pursuits.
Q1.: How many the MOQ of your company?
A1.: Our company MOQ is 1pcs.
Q2.: Could you accept OEM and customize?
A2.:YES, we can customize for you according to sample or drawing.
Q3.: Could you supply sample for free?
A3.: Yes, we can supply sample for free, but need our customer afford freight.
Q4. : Does your factory have CE?
A4.: Yes, we have ISO 9001:2008, and SASO. If you want other CE, we can do for you.
Q5.: Is it your company is factory or Trade Company?
A5.: We have our own factory; our type is factory + trade.
Q6.: What time the guarantee of your bearing quality guarantee period:?
A6.: 6 months ,Customer need supply photos and send bearing back.
Q7.: Could you tell me the payment term of your company can accept?
A7.: T/T, Western Union, PayPal, T/T, L/C
Q8.: Could you tell me the delivery time of your goods?
A8.: 7-15 days , mostly base on your order quantity
If you have any problems pls feel free to contact with me, thank you.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Rolling Body: | Ball Bearings |
|---|---|
| The Number of Rows: | Single |
| Outer Dimension: | Medium and Large(120-190mm) |
| Material: | Bearing Steel |
| Spherical: | Non-Aligning Bearings |
| Load Direction: | Axial Bearing |
| Customization: |
Available
| Customized Request |
|---|
What are the Common Signs of Wear or Damage in Ball Bearings that Indicate the Need for Replacement?
Ball bearings are subjected to wear and stress during operation, and over time, they may exhibit signs of damage or deterioration that warrant replacement. Recognizing these signs is crucial to prevent catastrophic failure and ensure safe and reliable operation. Here are the common signs of wear or damage in ball bearings:
- Unusual Noise:
If you hear unusual grinding, clicking, or rumbling noises coming from the bearing during operation, it may indicate worn-out or damaged components. Unusual noise suggests that the bearing is no longer operating smoothly.
- Vibration:
Excessive vibration in the machinery can be a sign of bearing wear. Vibrations can result from uneven wear, misalignment, or damaged components within the bearing.
- Increased Temperature:
Higher operating temperatures than usual may indicate increased friction due to inadequate lubrication, wear, or other issues. Monitoring the bearing’s temperature can help identify potential problems.
- Irregular Movement:
If you notice irregular movement, jerking, or sticking during rotation, it could be a sign that the bearing is no longer operating smoothly. This may be due to damaged rolling elements or raceways.
- Reduced Performance:
If the machinery’s performance has decreased, it may be due to a compromised bearing. Reduced efficiency, increased energy consumption, or a decline in overall performance could be indicators of bearing wear.
- Visible Wear or Damage:
Inspect the bearing for visible signs of wear, such as pitting, scoring, or discoloration on the rolling elements or raceways. Severe wear or damage is a clear indication that the bearing needs replacement.
- Leakage or Contamination:
If there is evidence of lubricant leakage, contamination, or the presence of foreign particles around the bearing, it suggests that the seal or shield may be compromised, leading to potential damage.
- Looseness or Excessive Play:
If you can feel excessive play or looseness when manually moving the bearing, it could indicate worn-out components or misalignment.
- Reduced Lifespan:
If the bearing’s expected lifespan is significantly shorter than usual, it may be due to inadequate lubrication, excessive loads, or improper installation, leading to accelerated wear.
- Frequent Failures:
If the bearing is consistently failing despite regular maintenance and proper use, it could indicate a chronic issue that requires addressing, such as inadequate lubrication or misalignment.
It’s important to conduct regular inspections, monitor performance, and address any signs of wear or damage promptly. Replacing worn or damaged ball bearings in a timely manner can prevent further damage to machinery, reduce downtime, and ensure safe and efficient operation.
What Precautions should be taken to Prevent Contamination of Ball Bearings in Industrial Settings?
Preventing contamination of ball bearings is essential to ensure their proper function, longevity, and overall performance in industrial settings. Contaminants such as dust, dirt, debris, and particles can significantly impact bearing operation. Here are important precautions to take to prevent contamination of ball bearings:
- Effective Sealing:
Choose ball bearings with appropriate seals or shields to prevent the ingress of contaminants. Seals provide a physical barrier against dust, moisture, and particles, ensuring the bearing’s interior remains clean.
- Clean Environment:
Maintain a clean working environment around the machinery and equipment. Regularly clean the surrounding areas to prevent the accumulation of dirt and debris that could enter the bearings.
- Proper Handling:
Handle bearings with clean hands and use gloves if necessary. Avoid touching the bearing surfaces with bare hands, as natural skin oils can transfer contaminants onto the bearing.
- Clean Tools and Equipment:
Use clean tools and equipment during installation and maintenance to prevent introducing contaminants. Ensure that tools are properly cleaned before coming into contact with the bearing components.
- Contamination-Controlled Workstations:
Establish contamination-controlled workstations for bearing handling, installation, and maintenance. These areas should have proper ventilation, filtered air, and minimal exposure to external contaminants.
- Proper Lubrication:
Use the correct lubricant in appropriate quantities. Lubricants help create a barrier against contaminants and reduce friction. Regularly inspect and replenish lubrication to maintain its effectiveness.
- Regular Inspections:
Implement a routine inspection schedule to monitor the condition of the bearings. Look for signs of contamination, wear, and damage. Address any issues promptly to prevent further damage.
- Training and Education:
Train personnel on proper handling, installation, and maintenance practices to minimize the risk of contamination. Educated employees are more likely to take precautions and prevent accidental contamination.
- Environmental Controls:
In sensitive environments, such as clean rooms or medical facilities, implement strict environmental controls to minimize the presence of contaminants that could affect bearing performance.
- Regular Cleaning and Maintenance:
Perform regular cleaning and maintenance of machinery and equipment to prevent the buildup of contaminants. Keep bearings protected during maintenance to prevent debris from entering during the process.
- Selection of Suitable Bearings:
Choose bearings that are specifically designed for the application’s environmental conditions. Some bearings have advanced sealing options or specialized coatings that enhance contamination resistance.
By implementing these precautions, industries can significantly reduce the risk of contamination in ball bearings, ensuring smooth operation, extended bearing life, and enhanced equipment reliability.
What are the Different Components that Make up a Typical Ball Bearing?
A typical ball bearing consists of several essential components that work together to reduce friction and support loads. Here are the main components that make up a ball bearing:
- Outer Ring:
The outer ring is the stationary part of the bearing that provides support and houses the other components. It contains raceways (grooves) that guide the balls’ movement.
- Inner Ring:
The inner ring is the rotating part of the bearing that attaches to the shaft. It also contains raceways that correspond to those on the outer ring, allowing the balls to roll smoothly.
- Balls:
The spherical balls are the rolling elements that reduce friction between the inner and outer rings. Their smooth rolling motion enables efficient movement and load distribution.
- Cage or Retainer:
The cage, also known as the retainer, maintains a consistent spacing between the balls. It prevents the balls from touching each other, reducing friction and preventing jamming.
- Seals and Shields:
Many ball bearings include seals or shields to protect the internal components from contaminants and retain lubrication. Seals provide better protection against contaminants, while shields offer less resistance to rotation.
- Lubricant:
Lubrication is essential to reduce friction, wear, and heat generation. Bearings are typically filled with lubricants that ensure smooth movement between the balls and raceways.
- Flanges and Snap Rings:
In some designs, flanges or snap rings are added to help position and secure the bearing in its housing or on the shaft. Flanges prevent axial movement, while snap rings secure the bearing radially.
- Raceways:
Raceways are the grooved tracks on the inner and outer rings where the balls roll. The shape and design of the raceways influence the bearing’s load-carrying capacity and performance.
- Anti-Friction Shield:
In certain high-speed applications, a thin anti-friction shield can be placed between the inner and outer rings to minimize friction and heat generation.
These components work together to enable the smooth rolling motion, load support, and reduced friction that characterize ball bearings. The proper design and assembly of these components ensure the bearing’s optimal performance and longevity in various applications.
editor by CX 2024-05-03
China Best Sales Low Price CZPT CZPT AC Series Contact Angle 25 7022AC 7228AC 7211acm 7307AC 7307acm 7316acm 7321acm Single Row Angular Contact Ball Bearing for Auto Parts connecting rod bearing
Product Description
PRODUCT PICTURES
OUR SERVICES
We can provide manufacturing capabilities and services of regular bearings for you, or customized non-standard bearings as you required.
BEARING:
— Dimensions
— Material
— Tolerance standard
APPEARANCE:
— Logo (Laser Marking)
— Package Design
40+ YEARS EXPERIENCE
CONTINUOUS AND STABLE DELIVERY OF PRODUCTS.
With over 40 years experience of the bearing manufacturing, we know how to make good bearings with less cost consistently and efficiently.
We use advanced CNC turning, grinding, and superfinishing machines to ensure high, stable, and accurate machining. All of your goods, from the most economical category, to the highest rated category, will always be manufactured precisely to the standards you require.
OWN HEAT TREATMENT
CONTROALLABLE COST AND QUALITY.
Heat treatment is 1 of the crucial processes to ensure high performance of bearing materials. Compared with other manufacturers, we can produce higher quality bearings at smaller cost, with a more flexible and controllable production schedule, and in a shorter time.
We have 6 heat treatment production lines.
Bearings are heated uniformly, with small deformation and little/no oxidized decarburization, which can make them have high hardness, high fatigue resistance, good wear resistance, dimensional stability, and excellent mechanical strength.
OUTSTXIHU (WEST LAKE) DIS. QUALITY
LOW NOISE, LOW FRICTION AND LONG LIFE.
All our products are characterized by low noise, low friction and long life. This is due to our attention to the roundness, waviness and surface roughness of bearing raceway.
Our products fully meets the requirements of national and international standards accorind to the testing result of
roughness, roundness, hardness, vibration noise, vibration velocity.
PACKING
PACKAGING THAT HELPS SELL.
1, Inner package
Corrosion and Dust Proof PE plastic film / bag packing + Tube packing, or Wrapping tape for larger bearings.
2, Corrugated Individual Box
Our attractive sales-helpful “3-JOYS” package, or as the design of your package.
3, Outer package
Corrugated carton + Wooden pallet
MODERN WELL-ORGANIZED WAREHOUSE
· Constant temperature (20°C) and humidity (RH 52%) warehouse
· Hundreds of models on hand, short delivery time.
HONOR & SYSTEM CERTIFICATES
EXHIBITION
SAMPLES POLICY
FREE SAMPLES AND SHIPPING
We are happy to send you free samples of our bearings for field testing. All transportation costs will be paid by us.
Please note: Depending on the model and value of samples, this policy may not apply!
Please contact our sales staff for details.
TRANSPORTATION
FASTEST DELIVERY TO CUSTOMERS
CUSTOMERS FEEDBACK
PAYMENT TERMS
To facilitate your payment, we offer a variety of options!
FAQ
1, About the lead time.
This depends on several factors, like Is the production schedule tight? Is there a corresponding model in stock, and is there enough of this model in stock? How many pcs of that model would be ordered?
Simply speaking, based on a 20′ GP container load:
| If the model your Preferred is | Sufficient stock | Lead Time |
| Regular models | YES | Within 7 days |
| Regular models | NO | Within 30 days |
| Non-regular model | NO | About 50 days |
For accurate estimate, please contact with our sale stuff. Thanks.
2, Minimum order quantity.
Even just ONE piece of bearing is ok for us.
3, If you don’t know which model is the right choice…
We would like to give you some advise if you like, according to the real situation and demand of your local market. Our purpose is to help you to get proper and right models for your customers, so that you would make a better sales and income finally.
4, Factory Inspection
We surely would welcome you or your representatives to come to our plants or working offices to take a good look and chat with our hardworking CZPT employees. Ask our sales stuff and she/he will arrange that for you.
OPTIONS OF SPECIFICATION AND STHangZhouRD
| Subject | Symbol | Description |
| Sealing & Sealing type | Z | Metal shield on 1 side. |
| ZZ | Metal shields on both sides. | |
| RS | Rubber seal on 1 side. | |
| 2RS | Rubber seals on both sides. | |
| ZNR | Shield on 1 side, snap ring groove in the outer ring, with snap ring on the opposite side of the shield | |
| 2ZNR | Shield on both sides, snap ring groove in the outer ring, with snap ring | |
| ZNBR | Shield on 1 side, snap ring groove in the outer ring, with snap ring on the same side as the shield | |
| Cage Materials | J | Pressed steel cages |
| M | Solid brass cage | |
| F | Solid cage made from steel or iron | |
| Y | Pressed brass cages. | |
| T | Laminated phenolic cages. | |
| TN | Polyamide cages | |
| TH | Glass-fiber reinforced phenolic resin cages. | |
| TV | Polyamide cage | |
| Cage Designs | P | Window-type cage |
| H | Claw-type cage | |
| A | Cage guided on the bearing outer ring | |
| B | Cage-guided on the bearing inner ring | |
| S | Cage with lubricating slots in the guiding surfaces | |
| D | Carbonitriding cage | |
| W | Welded cage | |
| R | Riveted Cage | |
| Cage Types | N/A | Claw-type cage |
| Ribbon cage | ||
| Crown cage | ||
| Sunflower cage | ||
| Tapered cage | ||
| Tolerances | PN(P0) | Bearings in standard tolerance |
| P6 | Tighter tolerance than standard bearings | |
| P5 | Tolerance tighter than P6 | |
| P4 | Tolerance tighter than P5 | |
| P2 | Tolerance tighter than P4 | |
| Contact Angle | C | Contact angle 15˚. |
| AC | Contact angle 25˚. | |
| CA | Contact angle 20˚. | |
| E | Contact angle 35˚. | |
| B | Contact angle 40˚. | |
| Bearing Sets | DB | Two bearings: back-to-back. |
| DF | Two bearings: face-to-face. | |
| DT | Two bearings: in tandem. | |
| TBT | Three bearings: tandem and back-to-back. | |
| TFT | Three bearings: tandem and face-to-face. | |
| QFC | Four bearings: tandem and face-to-face. | |
| DB | Two bearings: back-to-back. | |
| DF | Two bearings: face-to-face. |
PRODUCT PARAMETERS
This tech sheet may not contain all or every piece of information you want to know. Please contact our sales staff to obtain or compare the information.
| Designation | Boundary Dimension (mm) | Limiting Speed (rpm) | Load Rating (Kn) | Weight | ||||
| Designation | Inner Diameter (d) |
Outside Diameter (D) |
Width (B) |
Grease Lubrication | Oil Lubrication | Dynamic Load (cr) |
Static Load (cor) |
Weight (kg) |
| 7200C | 10 | 30 | 9 | 18000 | 26000 | 5.81 | 2.93 | 0.032 |
| 7200AC | 10 | 30 | 9 | 18000 | 26000 | 5.5 | 2.85 | 0.032 |
| 7200B | 10 | 30 | 9 | 16000 | 25000 | 5.3 | 2.7 | 0.032 |
| 7201C | 12 | 32 | 10 | 17000 | 24000 | 7.3 | 3.4 | 0.039 |
| 7201AC | 12 | 32 | 10 | 17000 | 24000 | 7.09 | 3.3 | 0.039 |
| 7201B | 12 | 32 | 10 | 15000 | 23000 | 6.9 | 3.2 | 0.039 |
| 7202C | 15 | 35 | 11 | 16000 | 22000 | 8.6 | 4.5 | 0.048 |
| 7202AC | 15 | 35 | 11 | 16000 | 22000 | 8.3 | 4.3 | 0.048 |
| 7202B | 15 | 35 | 11 | 15000 | 21000 | 7.9 | 4.2 | 0.048 |
| 7203C | 17 | 40 | 12 | 15000 | 20000 | 10.8 | 6.1 | 0.069 |
| 7203AC | 17 | 40 | 12 | 15000 | 20000 | 10.5 | 5.6 | 0.069 |
| 7203B | 17 | 40 | 12 | 14000 | 19000 | 9.9 | 5.5 | 0.069 |
| 7204C | 20 | 47 | 14 | 13000 | 18000 | 15.5 | 8.9 | 0.110 |
| 7204AC | 20 | 47 | 14 | 13000 | 18000 | 15 | 8.5 | 0.110 |
| 7204B | 20 | 47 | 14 | 12000 | 16000 | 13.4 | 7.6 | 0.110 |
| 7205C | 25 | 52 | 15 | 11000 | 16000 | 16.5 | 10 | 0.130 |
| 7205AC | 25 | 52 | 15 | 11000 | 16000 | 15.8 | 9.7 | 0.130 |
| 7205B | 25 | 52 | 15 | 10000 | 14000 | 14.8 | 9.3 | 0.130 |
| 7206C | 30 | 62 | 16 | 9000 | 13000 | 23 | 14.7 | 0.217 |
| 7206AC | 30 | 62 | 16 | 9000 | 13000 | 22.1 | 13.5 | 0.217 |
| 7206B | 30 | 62 | 16 | 8500 | 12000 | 20.5 | 13.5 | 0.217 |
| 7207C | 35 | 72 | 17 | 8000 | 11000 | 30.3 | 20 | 0.313 |
| 7207AC | 35 | 72 | 17 | 8000 | 11000 | 29.2 | 18 | 0.313 |
| 7207B | 35 | 72 | 17 | 7500 | 10000 | 28.3 | 14.8 | 0.313 |
| 7208C | 40 | 80 | 18 | 7500 | 10000 | 38.4 | 26.3 | 0.402 |
| 7208AC | 40 | 80 | 18 | 7500 | 10000 | 36.8 | 25.4 | 0.402 |
| 7208B | 40 | 80 | 18 | 6700 | 9000 | 34.5 | 23.8 | 0.402 |
| 7209C | 45 | 85 | 19 | 6700 | 9000 | 40.4 | 29.3 | 0.460 |
| 7209AC | 45 | 85 | 19 | 6700 | 9000 | 38.6 | 28.1 | 0.460 |
| 7209B | 45 | 85 | 19 | 6300 | 8500 | 34 | 24.6 | 0.460 |
| 7210C | 50 | 90 | 20 | 6300 | 8500 | 42.8 | 31.3 | 0.510 |
| 7210AC | 50 | 90 | 20 | 6300 | 8500 | 40.8 | 30.1 | 0.510 |
| 7210B | 50 | 90 | 20 | 5600 | 8000 | 40.4 | 25.6 | 0.510 |
| 7211C | 55 | 100 | 21 | 5600 | 7000 | 53.2 | 39.9 | 0.680 |
| 7211AC | 55 | 100 | 21 | 5600 | 7000 | 50.8 | 38.2 | 0.680 |
| 7211B | 55 | 100 | 21 | 5300 | 7000 | 46.3 | 36 | 0.680 |
| 7212C | 60 | 110 | 22 | 5300 | 7000 | 61 | 48.2 | 1.571 |
| 7212AC | 60 | 110 | 22 | 5300 | 7000 | 58.1 | 46 | 1.571 |
| 7212B | 60 | 110 | 22 | 4800 | 6300 | 56.1 | 44.3 | 1.571 |
| 7213C | 65 | 120 | 23 | 4800 | 6300 | 69.8 | 54.4 | 1.090 |
| 7213AC | 65 | 120 | 23 | 4800 | 6300 | 66.6 | 52.1 | 1.090 |
| 7213B | 65 | 120 | 23 | 4300 | 6000 | 65.7 | 50.2 | 1.090 |
| 7214C | 70 | 125 | 24 | 4500 | 5800 | 72.8 | 59.7 | 1.180 |
| 7214AC | 70 | 125 | 24 | 4500 | 5800 | 69.4 | 57 | 1.180 |
| 7214B | 70 | 125 | 24 | 4000 | 5600 | 70.4 | 56.3 | 1.180 |
| 7215C | 75 | 130 | 25 | 4300 | 5600 | 79.2 | 65.6 | 1.320 |
| 7215AC | 75 | 130 | 25 | 4300 | 5600 | 75.3 | 62.8 | 1.320 |
| 7215B | 75 | 130 | 25 | 3800 | 5300 | 68.6 | 58.2 | 1.320 |
| 7216C | 80 | 140 | 26 | 4000 | 5300 | 92.5 | 66.2 | 1.570 |
| 7216AC | 80 | 140 | 26 | 4000 | 5300 | 91.3 | 65.1 | 1.570 |
| 7216B | 80 | 140 | 26 | 4000 | 5300 | 78.7 | 65.7 | 1.570 |
| 7217C | 85 | 150 | 28 | 3800 | 5000 | 99.7 | 84.6 | 2.571 |
| 7217AC | 85 | 150 | 28 | 3800 | 5000 | 94.9 | 80.8 | 2.571 |
| 7217B | 85 | 150 | 28 | 3600 | 4800 | 83.2 | 74.1 | 2.571 |
| 7218C | 90 | 160 | 30 | 3600 | 4800 | 128 | 111.7 | 2.470 |
| 7218AC | 90 | 160 | 30 | 3600 | 4800 | 122 | 106.5 | 2.470 |
| 7218B | 90 | 160 | 30 | 3200 | 4300 | 107.6 | 92.4 | 2.470 |
| 7219C | 95 | 170 | 32 | 3400 | 4500 | 134.6 | 112.2 | 3.571 |
| 7219AC | 95 | 170 | 32 | 3400 | 4500 | 128.4 | 107.8 | 3.571 |
| 7219B | 95 | 170 | 32 | 3000 | 4000 | 121.4 | 106.7 | 3.571 |
| 7220C | 100 | 180 | 34 | 3200 | 4300 | 148 | 125 | 3.620 |
| 7220AC | 100 | 180 | 34 | 3200 | 4300 | 142 | 120.6 | 3.620 |
| 7220B | 100 | 180 | 34 | 2800 | 3800 | 140 | 102.5 | 3.620 |
| 7221C | 105 | 190 | 36 | 3000 | 4000 | 166.6 | 138.6 | 4.290 |
| 7221AC | 105 | 190 | 36 | 3000 | 4000 | 159 | 135.1 | 4.290 |
| 7221B | 105 | 190 | 36 | 2800 | 3800 | 143.3 | 128.5 | 4.290 |
| 7222C | 110 | 200 | 38 | 2800 | 3800 | 184.7 | 154.8 | 5.030 |
| 7222AC | 110 | 200 | 38 | 2800 | 3800 | 176.3 | 151.2 | 5.030 |
| 7222B | 110 | 200 | 38 | 2400 | 3400 | 153.8 | 144.3 | 5.030 |
| 7224C | 120 | 215 | 40 | 2400 | 3400 | 203.1 | 178.4 | 7.080 |
| 7224AC | 120 | 215 | 40 | 2400 | 3400 | 193.6 | 170.9 | 7.080 |
| 7224B | 120 | 215 | 40 | 2200 | 3200 | 165.4 | 161.4 | 7.080 |
| 7226C | 130 | 230 | 40 | 2000 | 3000 | 206.6 | 209.2 | 8.100 |
| 7226AC | 130 | 230 | 40 | 2000 | 3000 | 196.4 | 200.1 | 8.100 |
| 7226B | 130 | 230 | 40 | 1800 | 2800 | 170.8 | 174.2 | 8.100 |
| 7228C | 140 | 250 | 42 | 2000 | 2800 | 227.2 | 238.3 | 9.950 |
| 7228AC | 140 | 250 | 42 | 2000 | 2800 | 216.9 | 227.4 | 9.950 |
| 7228B | 140 | 250 | 42 | 1800 | 2600 | 212.2 | 197.3 | 9.950 |
| 7232AC | 160 | 290 | 48 | 1700 | 2400 | 250 | 288 | 15.49 |
| 7234AC | 170 | 310 | 52 | 1600 | 2200 | 281 | 341 | 19.69 |
| 7236AC | 180 | 320 | 52 | 2200 | 2700 | 293 | 362 | 20.26 |
| 7238AC | 190 | 340 | 55 | 2000 | 2500 | 303 | 390 | 24.31 |
| 7240AC | 200 | 360 | 58 | 1300 | 1800 | 343 | 449 | 28.82 |
| 7244AC | 220 | 400 | 65 | 1100 | 1600 | 358 | 482 | 33.60 |
| 7248AC | 240 | 440 | 72 | 1500 | 1800 | 403 | 595 | 51.8 |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Contact Angle: | 25° |
|---|---|
| Aligning: | Aligning Bearing |
| Separated: | Unseparated |
| Rows Number: | Single |
| Load Direction: | Radial Bearing |
| Material: | Bearing Steel |
| Samples: |
US$ 5/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What are the Challenges Associated with Noise Reduction in Ball Bearings?
Noise reduction in ball bearings is a crucial consideration, especially in applications where noise levels must be minimized for operational efficiency and user comfort. While ball bearings are designed to operate smoothly, there are several challenges associated with reducing noise in their operation:
- Vibration:
Vibration generated by the movement of rolling elements and raceways can lead to noise. Even minor irregularities in bearing components or the mounting system can cause vibration that translates into audible noise.
- Bearing Type and Design:
The type and design of the ball bearing can impact noise generation. For example, deep groove ball bearings are known for their quiet operation, while angular contact bearings can generate more noise due to their higher contact angles.
- Lubrication:
Improper or inadequate lubrication can result in increased friction and wear, leading to noise. Choosing the right lubricant and maintaining proper lubrication levels are essential for reducing noise in ball bearings.
- Bearing Clearance and Preload:
Incorrect clearance or preload settings can lead to noise issues. Excessive clearance or inadequate preload can cause the rolling elements to impact the raceways, resulting in noise during rotation.
- Material and Manufacturing Quality:
The quality of materials and manufacturing processes can affect noise levels. Inconsistent or low-quality materials, improper heat treatment, or manufacturing defects can lead to noise generation during operation.
- Surface Finish:
The surface finish of the rolling elements and raceways can impact noise. Rough surfaces can generate more noise due to increased friction and potential irregularities.
- Sealing and Shielding:
Seals and shields that protect bearings can influence noise levels. While they are necessary for contamination prevention, they can also cause additional friction and generate noise.
- Operating Conditions:
External factors such as temperature, speed, and load can influence noise levels. High speeds or heavy loads can amplify noise due to increased stress on the bearing components.
- Wear and Deterioration:
As ball bearings wear over time, noise levels can increase. Worn components or inadequate lubrication can lead to more significant noise issues as the bearing operates.
To address these challenges and reduce noise in ball bearings, manufacturers and engineers employ various techniques, such as optimizing design, selecting suitable bearing types, using proper lubrication, maintaining accurate preload settings, and ensuring high-quality materials and manufacturing processes. Noise reduction efforts are essential to improve overall product quality, meet noise regulations, and enhance user experience in various applications.
How do Temperature and Environmental Conditions Affect the Performance of Ball Bearings?
Temperature and environmental conditions have a significant impact on the performance and longevity of ball bearings. The operating environment can influence factors such as lubrication effectiveness, material properties, and overall bearing behavior. Here’s how temperature and environmental conditions affect ball bearing performance:
- Lubrication:
Temperature variations can affect the viscosity and flow characteristics of lubricants. Extreme temperatures can cause lubricants to become too thin or too thick, leading to inadequate lubrication and increased friction. In high-temperature environments, lubricants can degrade, reducing their effectiveness.
- Material Properties:
Temperature changes can alter the material properties of the bearing components. High temperatures can lead to thermal expansion, affecting bearing clearances and potentially causing interference between components. Extreme cold temperatures can make materials more brittle and prone to fracture.
- Clearance Changes:
Temperature fluctuations can cause changes in the internal clearance of ball bearings. For instance, at high temperatures, materials expand, leading to increased clearance. This can affect bearing performance, load distribution, and overall stability.
- Corrosion and Contamination:
Harsh environmental conditions, such as exposure to moisture, chemicals, or abrasive particles, can lead to corrosion and contamination of bearing components. Corrosion weakens the material, while contamination accelerates wear and reduces bearing life.
- Thermal Stress:
Rapid temperature changes can result in thermal stress within the bearing components. Differential expansion and contraction between the inner and outer rings can lead to stress and distortion, affecting precision and bearing integrity.
- Noise and Vibration:
Temperature-related changes in material properties and internal clearances can influence noise and vibration levels. Extreme temperatures can lead to increased noise generation and vibration, affecting the overall operation of machinery.
- Lubricant Degradation:
Environmental factors like humidity, dust, and contaminants can lead to premature lubricant degradation. Oxidation, moisture absorption, and the presence of foreign particles can compromise the lubricant’s performance and contribute to increased friction and wear.
- Seal Effectiveness:
Seals and shields that protect bearings from contaminants can be affected by temperature fluctuations. Extreme temperatures can lead to seal hardening, cracking, or deformation, compromising their effectiveness in preventing contamination.
- Choosing Appropriate Bearings:
When selecting ball bearings for specific applications, engineers must consider the expected temperature and environmental conditions. High-temperature bearings, bearings with specialized coatings, and those with enhanced sealing mechanisms may be necessary to ensure reliable performance.
Overall, understanding the impact of temperature and environmental conditions on ball bearing performance is crucial for proper bearing selection, maintenance, and ensuring optimal operation in diverse industries and applications.
What are the Different Components that Make up a Typical Ball Bearing?
A typical ball bearing consists of several essential components that work together to reduce friction and support loads. Here are the main components that make up a ball bearing:
- Outer Ring:
The outer ring is the stationary part of the bearing that provides support and houses the other components. It contains raceways (grooves) that guide the balls’ movement.
- Inner Ring:
The inner ring is the rotating part of the bearing that attaches to the shaft. It also contains raceways that correspond to those on the outer ring, allowing the balls to roll smoothly.
- Balls:
The spherical balls are the rolling elements that reduce friction between the inner and outer rings. Their smooth rolling motion enables efficient movement and load distribution.
- Cage or Retainer:
The cage, also known as the retainer, maintains a consistent spacing between the balls. It prevents the balls from touching each other, reducing friction and preventing jamming.
- Seals and Shields:
Many ball bearings include seals or shields to protect the internal components from contaminants and retain lubrication. Seals provide better protection against contaminants, while shields offer less resistance to rotation.
- Lubricant:
Lubrication is essential to reduce friction, wear, and heat generation. Bearings are typically filled with lubricants that ensure smooth movement between the balls and raceways.
- Flanges and Snap Rings:
In some designs, flanges or snap rings are added to help position and secure the bearing in its housing or on the shaft. Flanges prevent axial movement, while snap rings secure the bearing radially.
- Raceways:
Raceways are the grooved tracks on the inner and outer rings where the balls roll. The shape and design of the raceways influence the bearing’s load-carrying capacity and performance.
- Anti-Friction Shield:
In certain high-speed applications, a thin anti-friction shield can be placed between the inner and outer rings to minimize friction and heat generation.
These components work together to enable the smooth rolling motion, load support, and reduced friction that characterize ball bearings. The proper design and assembly of these components ensure the bearing’s optimal performance and longevity in various applications.
editor by CX 2024-05-02
China factory CZPT 6705-2RS Single Row High Speed Deep Groove Ball Bearings carrier bearing
Product Description
Product Description
| Item NO. | 6705 | Structure | Deeo Groove Ball Bearing |
| Specification(mm) | 25x32x4 | Clearance | C1, C2, C0,C3, C4, C5 |
| Weight(kg) | 0.005 | Precision | P0, P6, P5, P4 etc. |
| Number of Row | Single Row | Tolerance | ABEC-1, ABEC-3,ABEC-5 etc |
| Material | GCr15 etc. | Noise & Vibration | Z1V1, Z2V2, Z3V3, Z4V4 |
| Cage | Steel, Nylon | Marking | Neutral or Brand Name and ITEM NO. |
| Seals Type | OPEN, (2)RS, (2)ZZ | Packing | Industrial Packing |
Ball Bearings
| Deep Groove Ball Bearings |
| Self Aligning Ball Bearings |
| Angular Contact Ball Bearings |
| Thrust Bearings |
Applications
Electric motors
Elevators
Conveyor systems
Agriculture industry
Steering applications
Industrial pumps and drive cars
Pulp and paper industry
Industrial gearboxes
Trucks, trailers & buses
*Own Manufacturing Full Range*
Product Parameters
Seals Type
| 2RS/RS – Double Rubber Seal |
| Provide better protection. Has a lower rotational and temperature resistance. |
| Open |
| No rotational resistance and higher temperature resistance. |
| ZZ/Z – Double Metal Shield |
| Provide better rotational resistance and suitable for higher temperature resistance. |
Company Profile
What We Do
Comprehensive product range:
– Bearings
– Oil seals, Transmission belt
– Chain and Sprocket
– Hub assembly & Wheel bearings
– Coupling, castings
– Linear motion
About Us
Focus on a variety of industries
Provide maintenance solutions
Optimize customer inventory and reduce cost
Vision
Continue to innovate through resource integration and business diversification to maintain uniqueness in the market
Mission
Provide comprehensive quality products and thoughtful customer service
Our Values
Behavior-based, service oriented, focused on results, and committed to continuous improvement
Advantage
1. Advanced Automatic Lines
2. Comprehensive Range
3. Premium Quality
4. Sustainability
Factory
Granville Industrial Co., Ltd.
HangZhou Granville Mechanical & Electrical Co., Ltd.
The advantage ball bearing factory located in the bearing manufacturing center – HangZhou, China. There are 2 plants, 1 specialized in manufacturing common grade ball bearings, another 1 professional in EMQ bearings with stablized Z3V3 quality. The factory takes her every effort in purchasing the most advanced bearing process equipments, NC automatic facilities are widely used in the factory and has becomes a bearing factory owning the most advanced process equipments in China. The Granville own ball bearing factory division manufacturing a whole range of radial deep groove ball bearings, open – shield – sealed – chrome steel, stainless steel available.
Product Offering:
| Bore Size | 3mm and up |
| Closures | Open, Non-contact metallic shields, Non-contact seals |
| Ring Material | 52100 chrome steel 440C stainless steel 420C stainless steel |
| Seal Material | Nitrile, Polyacrylic |
| Retainer | Riveted steel, Crimped steel, Crowned steel, Crowned nylon |
| Precision Class | ABEC1, ABEC3, ABEC5, ABEC-7 |
| Radial Clearance | C2, CO, C3, C4, C5 |
| Heat stabilization | SO, S1, S2, 53 |
The Granville stablized high precision EMQ bearings in 10 series for below OE industries:
1 EM bearings for automobiles
2 EM bearings for air conditioners
3 EM bearings for industrial sewing machines
4 EM bearings for textile machines
5 Bearings for electric tools
6 EM bearings for general machinery
7 EM bearings for washers
8 EM bearings for vacuum cleaners
9 Bearings for bank note counters
10 EM bearings for cleanout machines
Quality Warranty
Granville as a manufacturer of high quality products, guarantees compliance with the highest standards relative to the use of the best steel quality in the production process, the highest standards in the design of contact surfaces, as well as the most efficient packing and lubrication of parts. From material coming, quality control through all processes. Except interal test, goods to third party inspection if required. After the center of inspection and experiment being founded, effective methods of inspecting all kinds of raw materials are mastered and then the reliability of bearings is ensured. One of our main objectives is the continued improvement in the quality of our products and processes, in pursuit of which we obtained ISO certification 9001:2008 and TS16949.
Advantage Manufacturing Processes and Quality Control:
01 Heat Treatment
02 Centerless Grinding Machine 11200 (most advanced)
03 Automatic Production Lines for Raceway
04 Automatic Production Lines for Raceway
05 Ultrasonic Cleaning of Rings
06 Automatic Assembly
07 Ultrasonic Cleaning of Bearings
08 Automatic Greasing, Seals Pressing
09 Measurement of Bearing Vibration (Acceleration)
10 Measurement of Bearing Vibration (Speed)
11 Laser Marking
12 Automatic Packing
FAQ
ABOUT COMPANY
We are manufacturer; export bearings for a long time and globally.
Our main product – BEARING, PILLOW BLOCK, OTHER POWER TRANSMISSION…
SAMPLES
Qty: 1-10 PCS are available.
Free samples – regarding Model No., material, and quantity. Some require customers to pay both sample charges and shipping costs.
Tailor-made quality sample could be sent before big quantity delivery.
CUSTOMIZED
Yes, we have OEM/ODM service.
MOQ
10 PCS for standard bearings.
3000 PCS for customization (will further check as per specific requirement)
LEAD TIME
Bearings and its components 30 days
Bearing units 60 days
PACKING
Plastic tube->Plastic bag->Carton->Closed pallet(Special designed available)
PAYMENT
General 30% T/T in advance, 70% balance at sight.
AFTER-SALE SERVICE
12 months, please provide photos and items for us to solve and improve.
SUPPORT
Please visit our bearings website, we strongly encourage that you can communicate with us through email, thanks!
Also Bought
More for your reference, or click “Contact Now” for tailor made service 🙂
Deep groove ball bearing
product/jZLGTEaYaykP/China-GIL-Metric-Single-Row-6013-C3-Deep-Groove-Ball-Bearing.html
Angular contact ball bearing
product/IwUtMQTSCyWc/China-GIL-Bicycle-Bearing-5202-ZZ-Double-Row-Angular-Contact-Ball-Bearing.html
Mounted bearings unit
product/jdDTWOoCfAaG/China-TANN-UCP206-Spherical-Insert-Solid-Cast-Iron-Mounted-Bearing-Units.html
Automotive
-Taperer roller bearing
product/tOzGXnPEsCWf/China-GIL-L45449-410-Single-Row-Inch-Tapered-Roller-Bearing-for-Cars-Light-Tracks-and-Mining-Processing.html
-Wheel bearings
product/XdCTJkexAFWA/China-DAC25520037-25x52x37-Strict-Quality-Standards-Double-Row-Angular-Contact-Ball-Bearings.html
-Universal joint
product/OduTLChrAfGw/China-Interchangeable-GIL-OEM-UJ-Series-UJ498-Universal-Joint-for-Auto-Spare-Parts.html
Others
-Thrust ball bearing
product/cFWaQZPDJAGR/China-51212-60x95x26-Durable-Flexible-Thrust-Deep-Groove-Ball-Bearing-for-Mechanic-Drive.html
-Self-aligning ball bearing
product/odLTlUXCAGfO/China-GIL-Low-Noise-Motor-Bearing-1204-1204K-Self-Aligning-Ball-Bearing.html
-Needle roller bearings
product/uwLAXMHEYftv/China-GIL-K20X26X13-Needle-Roller-and-Cage-Assemblies.html
-Spherical roller bearings
product/zdLtDsecfNhA/China-Construction-Parts-22206-22206K-Spherical-Roller-Bearing.html
-Cylindrical roller bearings
product/BFPfHYzEHNkp/China-GIL-N-NU-NJ-NUP-NF-NN-NNU-Series-NJ-202-Cylindrical-Roller-Bearing.html
-Rollers
product/iwTaGNgYgCVf/China-GCr15-Spherical-Rollers-for-Mechanical-Equipment-Speed-Reducer.html
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Low-Noise Motor |
|---|---|
| Advantage 1: | High-Speed |
| Advantage 2: | Low COF |
| Samples: |
US$ 0.45/Set
1 Set(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What are the Materials Typically Used in Manufacturing Ball Bearings and Their Advantages?
Ball bearings are manufactured using a variety of materials, each chosen for its specific properties and advantages in various applications. Here are some commonly used materials in ball bearing manufacturing and their respective benefits:
- High-Carbon Chrome Steel (AISI 52100):
This is the most common material used for ball bearing manufacturing. It offers excellent hardness, wear resistance, and fatigue strength. High-carbon chrome steel bearings are suitable for a wide range of applications, from industrial machinery to automotive components.
- Stainless Steel (AISI 440C, AISI 304, AISI 316):
Stainless steel bearings are corrosion-resistant and suitable for applications where moisture, chemicals, or exposure to harsh environments are concerns. AISI 440C offers high hardness and corrosion resistance, while AISI 304 and AISI 316 provide good corrosion resistance and are often used in food and medical industries.
- Ceramic:
Ceramic bearings use silicon nitride (Si3N4) or zirconia (ZrO2) balls. Ceramic materials offer high stiffness, low density, and excellent resistance to corrosion and heat. Ceramic bearings are commonly used in high-speed and high-temperature applications, such as in aerospace and racing industries.
- Plastic (Polyamide, PEEK):
Plastic bearings are lightweight and offer good corrosion resistance. Polyamide bearings are commonly used due to their low friction and wear properties. Polyether ether ketone (PEEK) bearings provide high-temperature resistance and are suitable for demanding environments.
- Bronze:
Bronze bearings are often used in applications where self-lubrication is required. Bronze has good thermal conductivity and wear resistance. Bearings made from bronze are commonly used in machinery requiring frequent starts and stops.
- Hybrid Bearings:
Hybrid bearings combine steel rings with ceramic balls. These bearings offer a balance between the advantages of both materials, such as improved stiffness and reduced weight. Hybrid bearings are used in applications where high speeds and low friction are essential.
- Specialty Alloys:
For specific applications, specialty alloys may be used to meet unique requirements. For example, bearings used in extreme temperatures or corrosive environments may be made from materials like titanium or hastelloy.
- Coated Bearings:
Bearings may also be coated with thin layers of materials like diamond-like carbon (DLC) or other coatings to enhance performance, reduce friction, and improve wear resistance.
The choice of material depends on factors such as application requirements, operating conditions, load, speed, and environmental factors. Selecting the right material is essential for ensuring optimal bearing performance, longevity, and reliability in diverse industries and applications.
What Precautions should be taken to Prevent Contamination of Ball Bearings in Industrial Settings?
Preventing contamination of ball bearings is essential to ensure their proper function, longevity, and overall performance in industrial settings. Contaminants such as dust, dirt, debris, and particles can significantly impact bearing operation. Here are important precautions to take to prevent contamination of ball bearings:
- Effective Sealing:
Choose ball bearings with appropriate seals or shields to prevent the ingress of contaminants. Seals provide a physical barrier against dust, moisture, and particles, ensuring the bearing’s interior remains clean.
- Clean Environment:
Maintain a clean working environment around the machinery and equipment. Regularly clean the surrounding areas to prevent the accumulation of dirt and debris that could enter the bearings.
- Proper Handling:
Handle bearings with clean hands and use gloves if necessary. Avoid touching the bearing surfaces with bare hands, as natural skin oils can transfer contaminants onto the bearing.
- Clean Tools and Equipment:
Use clean tools and equipment during installation and maintenance to prevent introducing contaminants. Ensure that tools are properly cleaned before coming into contact with the bearing components.
- Contamination-Controlled Workstations:
Establish contamination-controlled workstations for bearing handling, installation, and maintenance. These areas should have proper ventilation, filtered air, and minimal exposure to external contaminants.
- Proper Lubrication:
Use the correct lubricant in appropriate quantities. Lubricants help create a barrier against contaminants and reduce friction. Regularly inspect and replenish lubrication to maintain its effectiveness.
- Regular Inspections:
Implement a routine inspection schedule to monitor the condition of the bearings. Look for signs of contamination, wear, and damage. Address any issues promptly to prevent further damage.
- Training and Education:
Train personnel on proper handling, installation, and maintenance practices to minimize the risk of contamination. Educated employees are more likely to take precautions and prevent accidental contamination.
- Environmental Controls:
In sensitive environments, such as clean rooms or medical facilities, implement strict environmental controls to minimize the presence of contaminants that could affect bearing performance.
- Regular Cleaning and Maintenance:
Perform regular cleaning and maintenance of machinery and equipment to prevent the buildup of contaminants. Keep bearings protected during maintenance to prevent debris from entering during the process.
- Selection of Suitable Bearings:
Choose bearings that are specifically designed for the application’s environmental conditions. Some bearings have advanced sealing options or specialized coatings that enhance contamination resistance.
By implementing these precautions, industries can significantly reduce the risk of contamination in ball bearings, ensuring smooth operation, extended bearing life, and enhanced equipment reliability.
What are the Different Components that Make up a Typical Ball Bearing?
A typical ball bearing consists of several essential components that work together to reduce friction and support loads. Here are the main components that make up a ball bearing:
- Outer Ring:
The outer ring is the stationary part of the bearing that provides support and houses the other components. It contains raceways (grooves) that guide the balls’ movement.
- Inner Ring:
The inner ring is the rotating part of the bearing that attaches to the shaft. It also contains raceways that correspond to those on the outer ring, allowing the balls to roll smoothly.
- Balls:
The spherical balls are the rolling elements that reduce friction between the inner and outer rings. Their smooth rolling motion enables efficient movement and load distribution.
- Cage or Retainer:
The cage, also known as the retainer, maintains a consistent spacing between the balls. It prevents the balls from touching each other, reducing friction and preventing jamming.
- Seals and Shields:
Many ball bearings include seals or shields to protect the internal components from contaminants and retain lubrication. Seals provide better protection against contaminants, while shields offer less resistance to rotation.
- Lubricant:
Lubrication is essential to reduce friction, wear, and heat generation. Bearings are typically filled with lubricants that ensure smooth movement between the balls and raceways.
- Flanges and Snap Rings:
In some designs, flanges or snap rings are added to help position and secure the bearing in its housing or on the shaft. Flanges prevent axial movement, while snap rings secure the bearing radially.
- Raceways:
Raceways are the grooved tracks on the inner and outer rings where the balls roll. The shape and design of the raceways influence the bearing’s load-carrying capacity and performance.
- Anti-Friction Shield:
In certain high-speed applications, a thin anti-friction shield can be placed between the inner and outer rings to minimize friction and heat generation.
These components work together to enable the smooth rolling motion, load support, and reduced friction that characterize ball bearings. The proper design and assembly of these components ensure the bearing’s optimal performance and longevity in various applications.
editor by CX 2024-04-30
China Professional Ge90es-2RS Single Row Radial Ball Bearing for Screw Drilling Tool ball bearing
Product Description
Product Description
Spherical Bearings are consist of an inner ring with a sphere convex outside surface and a outer ring with concave inside surface. They are also called Spherical Plane Bearing, Spherical ball bushing bearings and Ball Bushings. Spherical Plain Bearings are used to accommodate shafts or rods with varying amounts of misalignment and provide consistent performance under conditions of marginal lubrication, extreme speed and critical-application stress.
Product Parameters
| No. | Model | Dimensions(mm) | Load Ratings |
Weight (Kg) |
||||||||
| d | D | B | C | dk | r1 min | r2 min | α | Dynamic | Static | |||
| (KN) | (KN) | |||||||||||
| 1 | GE15ES 2RS | 15 | 26 | 12 | 9 | 22 | 0.3 | 0.3 | 8 | 16 | 84 | 0.571 |
| 2 | GE17ES 2RS | 17 | 30 | 14 | 10 | 25 | 0.3 | 0.3 | 10 | 21 | 106 | 0.041 |
| 3 | GE20ES 2RS | 20 | 35 | 16 | 12 | 29 | 0.3 | 0.3 | 9 | 30 | 146 | 0.066 |
| 4 | GE25ES 2RS | 25 | 42 | 20 | 16 | 35.5 | 0.6 | 0.6 | 7 | 48 | 240 | 0.119 |
| 5 | GE30ES 2RS | 30 | 47 | 22 | 18 | 40.7 | 0.6 | 0.6 | 6 | 62 | 310 | 0.153 |
| 6 | GE35ES 2RS | 35 | 55 | 25 | 20 | 47 | 0.6 | 1 | 6 | 79 | 399 | 0.233 |
| 7 | GE40ES 2RS | 40 | 62 | 28 | 22 | 53 | 0.6 | 1 | 7 | 99 | 495 | 0.306 |
| 8 | GE45ES 2RS | 45 | 68 | 32 | 25 | 60 | 0.6 | 1 | 7 | 127 | 637 | 0.427 |
| 9 | GE50ES 2RS | 50 | 75 | 35 | 28 | 66 | 0.6 | 1 | 6 | 156 | 780 | 0.546 |
| 10 | GE60ES 2RS | 60 | 90 | 44 | 36 | 80 | 1 | 1 | 6 | 245 | 1220 | 1.04 |
| 11 | GE70ES 2RS | 70 | 105 | 49 | 40 | 92 | 1 | 1 | 6 | 313 | 1560 | 1.55 |
| 12 | GE80ES 2RS | 80 | 120 | 55 | 45 | 105 | 1 | 1 | 6 | 400 | 2000 | 2.31 |
| 13 | GE90ES 2RS | 90 | 130 | 60 | 50 | 115 | 1 | 1 | 5 | 488 | 2440 | 2.75 |
| 14 | GE100ES 2RS | 100 | 150 | 70 | 55 | 130 | 1 | 1 | 7 | 607 | 3030 | 4.45 |
| 15 | GE110ES 2RS | 110 | 160 | 70 | 55 | 140 | 1 | 1 | 6 | 654 | 3270 | 4.82 |
| 16 | GE120ES 2RS | 120 | 180 | 85 | 70 | 160 | 1 | 1 | 6 | 950 | 4750 | 8.05 |
| 17 | GE140ES 2RS | 140 | 210 | 90 | 70 | 180 | 1 | 1 | 7 | 1070 | 5350 | 11.02 |
| 18 | GE160ES 2RS | 160 | 230 | 105 | 80 | 200 | 1 | 1 | 8 | 1360 | 6800 | 14.01 |
| 19 | GE180ES 2RS | 180 | 260 | 105 | 80 | 225 | 1.1 | 1.1 | 6 | 1530 | 7650 | 18.65 |
| 20 | GE200ES 2RS | 200 | 290 | 130 | 100 | 250 | 1.1 | 1.1 | 7 | 2120 | 10600 | 28.03 |
| 21 | GE220ES 2RS | 220 | 320 | 135 | 100 | 275 | 1.1 | 1.1 | 8 | 2320 | 11600 | 35.51 |
| 22 | GE240ES 2RS | 240 | 340 | 140 | 100 | 300 | 1.1 | 1.1 | 8 | 2550 | 12700 | 39.91 |
Detailed Photos
Our Advantages
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Rolling Element: | Single Row |
|---|---|
| Structure: | Rod End |
| Material: | Alloy |
| Samples: |
US$ 10/Piece
1 Piece(Min.Order) | Order Sample Radial Spherical Plain Bearing
|
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What are the Challenges Associated with Noise Reduction in Ball Bearings?
Noise reduction in ball bearings is a crucial consideration, especially in applications where noise levels must be minimized for operational efficiency and user comfort. While ball bearings are designed to operate smoothly, there are several challenges associated with reducing noise in their operation:
- Vibration:
Vibration generated by the movement of rolling elements and raceways can lead to noise. Even minor irregularities in bearing components or the mounting system can cause vibration that translates into audible noise.
- Bearing Type and Design:
The type and design of the ball bearing can impact noise generation. For example, deep groove ball bearings are known for their quiet operation, while angular contact bearings can generate more noise due to their higher contact angles.
- Lubrication:
Improper or inadequate lubrication can result in increased friction and wear, leading to noise. Choosing the right lubricant and maintaining proper lubrication levels are essential for reducing noise in ball bearings.
- Bearing Clearance and Preload:
Incorrect clearance or preload settings can lead to noise issues. Excessive clearance or inadequate preload can cause the rolling elements to impact the raceways, resulting in noise during rotation.
- Material and Manufacturing Quality:
The quality of materials and manufacturing processes can affect noise levels. Inconsistent or low-quality materials, improper heat treatment, or manufacturing defects can lead to noise generation during operation.
- Surface Finish:
The surface finish of the rolling elements and raceways can impact noise. Rough surfaces can generate more noise due to increased friction and potential irregularities.
- Sealing and Shielding:
Seals and shields that protect bearings can influence noise levels. While they are necessary for contamination prevention, they can also cause additional friction and generate noise.
- Operating Conditions:
External factors such as temperature, speed, and load can influence noise levels. High speeds or heavy loads can amplify noise due to increased stress on the bearing components.
- Wear and Deterioration:
As ball bearings wear over time, noise levels can increase. Worn components or inadequate lubrication can lead to more significant noise issues as the bearing operates.
To address these challenges and reduce noise in ball bearings, manufacturers and engineers employ various techniques, such as optimizing design, selecting suitable bearing types, using proper lubrication, maintaining accurate preload settings, and ensuring high-quality materials and manufacturing processes. Noise reduction efforts are essential to improve overall product quality, meet noise regulations, and enhance user experience in various applications.
What Precautions should be taken to Prevent Contamination of Ball Bearings in Industrial Settings?
Preventing contamination of ball bearings is essential to ensure their proper function, longevity, and overall performance in industrial settings. Contaminants such as dust, dirt, debris, and particles can significantly impact bearing operation. Here are important precautions to take to prevent contamination of ball bearings:
- Effective Sealing:
Choose ball bearings with appropriate seals or shields to prevent the ingress of contaminants. Seals provide a physical barrier against dust, moisture, and particles, ensuring the bearing’s interior remains clean.
- Clean Environment:
Maintain a clean working environment around the machinery and equipment. Regularly clean the surrounding areas to prevent the accumulation of dirt and debris that could enter the bearings.
- Proper Handling:
Handle bearings with clean hands and use gloves if necessary. Avoid touching the bearing surfaces with bare hands, as natural skin oils can transfer contaminants onto the bearing.
- Clean Tools and Equipment:
Use clean tools and equipment during installation and maintenance to prevent introducing contaminants. Ensure that tools are properly cleaned before coming into contact with the bearing components.
- Contamination-Controlled Workstations:
Establish contamination-controlled workstations for bearing handling, installation, and maintenance. These areas should have proper ventilation, filtered air, and minimal exposure to external contaminants.
- Proper Lubrication:
Use the correct lubricant in appropriate quantities. Lubricants help create a barrier against contaminants and reduce friction. Regularly inspect and replenish lubrication to maintain its effectiveness.
- Regular Inspections:
Implement a routine inspection schedule to monitor the condition of the bearings. Look for signs of contamination, wear, and damage. Address any issues promptly to prevent further damage.
- Training and Education:
Train personnel on proper handling, installation, and maintenance practices to minimize the risk of contamination. Educated employees are more likely to take precautions and prevent accidental contamination.
- Environmental Controls:
In sensitive environments, such as clean rooms or medical facilities, implement strict environmental controls to minimize the presence of contaminants that could affect bearing performance.
- Regular Cleaning and Maintenance:
Perform regular cleaning and maintenance of machinery and equipment to prevent the buildup of contaminants. Keep bearings protected during maintenance to prevent debris from entering during the process.
- Selection of Suitable Bearings:
Choose bearings that are specifically designed for the application’s environmental conditions. Some bearings have advanced sealing options or specialized coatings that enhance contamination resistance.
By implementing these precautions, industries can significantly reduce the risk of contamination in ball bearings, ensuring smooth operation, extended bearing life, and enhanced equipment reliability.
What Factors should be Considered when Selecting a Ball Bearing for a Particular Application?
Selecting the right ball bearing for a specific application involves careful consideration of various factors to ensure optimal performance, longevity, and reliability. Here are the key factors that should be taken into account:
- Load Type and Magnitude:
Determine the type of load (radial, axial, or combined) and the magnitude of the load that the bearing will need to support. Choose a bearing with the appropriate load-carrying capacity to ensure reliable operation.
- Speed and Operating Conditions:
Consider the rotational speed of the application and the operating conditions, such as temperature, humidity, and exposure to contaminants. Different bearing types and materials are suited for varying speeds and environments.
- Accuracy and Precision:
For applications requiring high accuracy and precision, such as machine tool spindles or optical instruments, choose high-precision bearings that can maintain tight tolerances and minimize runout.
- Space Limitations:
If the application has limited space, choose miniature or compact ball bearings that can fit within the available dimensions without compromising performance.
- Thrust and Radial Loads:
Determine whether the application requires predominantly thrust or radial load support. Choose the appropriate type of ball bearing (thrust, radial, or angular contact) based on the primary load direction.
- Alignment and Misalignment:
If the application experiences misalignment between the shaft and housing, consider self-aligning ball bearings that can accommodate angular misalignment.
- Mounting and Installation:
Consider the ease of mounting and dismounting the bearing. Some applications may benefit from features like flanges or snap rings for secure installation.
- Lubrication and Maintenance:
Choose a bearing with appropriate lubrication options based on the application’s speed and temperature range. Consider whether seals or shields are necessary to protect the bearing from contaminants.
- Environmental Conditions:
Factor in the operating environment, including exposure to corrosive substances, chemicals, water, or dust. Choose materials and coatings that can withstand the specific environmental challenges.
- Bearing Material:
Select a bearing material that suits the application’s requirements. Common materials include stainless steel for corrosion resistance and high-carbon chrome steel for general applications.
- Bearing Arrangement:
Consider whether a single-row, double-row, or multiple bearings in a specific arrangement are needed to accommodate the loads and moments present in the application.
By carefully evaluating these factors, engineers and designers can choose the most suitable ball bearing that aligns with the specific demands of the application, ensuring optimal performance, durability, and overall operational efficiency.
editor by CX 2024-02-28
China best Single Row Ball Fire Truck Slewing Bearing for Sale ball bearing
Product Description
Product Description
King Steel is a professional manufacturer in slewing ring bearings. We can produce slew bearing for fire truck.
We can also design and make other standard and non-standard ball slewing ring bearings, roller slewing bearings and precision slewing ring bearings as per customer’s different technical requirements
Specifications:
|
Brand |
Ruding |
Type |
Enclosed |
|
Material |
42CrMo,50Mn |
Output Torque |
1200 N.m |
|
Tilting Moment Torque |
1.1K N.m |
Holding Torque |
2K N.m |
|
Static Axial Rating |
30 KN |
Static Radial Rating |
16.6 KN |
|
Dynamic Axial Rating |
9.6 KN |
Dynamic Radial Rating |
8.4KN |
|
Gear Ratio |
71:1 |
Efficiency |
40% |
Manufacturing Process:
Forging ring body material — Rough Lathing — Raceway heat treatment — Drilling — Teeth cutting — Teeth heat treatment — Ball hardness inspection — Assembling — Finall inspection — Packaging
Packaging & Shipping
Contact us
Please contact us for more information and quotations.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard or Nonstandard: | Standard |
|---|---|
| Feature: | High Speed, Vacuum, Antimagnetic, Cold-Resistant, Corrosion-Resistant, Heat-Resistant |
| Sealing Gland: | Non-Seal |
| Samples: |
US$ 1000/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What are the Challenges Associated with Noise Reduction in Ball Bearings?
Noise reduction in ball bearings is a crucial consideration, especially in applications where noise levels must be minimized for operational efficiency and user comfort. While ball bearings are designed to operate smoothly, there are several challenges associated with reducing noise in their operation:
- Vibration:
Vibration generated by the movement of rolling elements and raceways can lead to noise. Even minor irregularities in bearing components or the mounting system can cause vibration that translates into audible noise.
- Bearing Type and Design:
The type and design of the ball bearing can impact noise generation. For example, deep groove ball bearings are known for their quiet operation, while angular contact bearings can generate more noise due to their higher contact angles.
- Lubrication:
Improper or inadequate lubrication can result in increased friction and wear, leading to noise. Choosing the right lubricant and maintaining proper lubrication levels are essential for reducing noise in ball bearings.
- Bearing Clearance and Preload:
Incorrect clearance or preload settings can lead to noise issues. Excessive clearance or inadequate preload can cause the rolling elements to impact the raceways, resulting in noise during rotation.
- Material and Manufacturing Quality:
The quality of materials and manufacturing processes can affect noise levels. Inconsistent or low-quality materials, improper heat treatment, or manufacturing defects can lead to noise generation during operation.
- Surface Finish:
The surface finish of the rolling elements and raceways can impact noise. Rough surfaces can generate more noise due to increased friction and potential irregularities.
- Sealing and Shielding:
Seals and shields that protect bearings can influence noise levels. While they are necessary for contamination prevention, they can also cause additional friction and generate noise.
- Operating Conditions:
External factors such as temperature, speed, and load can influence noise levels. High speeds or heavy loads can amplify noise due to increased stress on the bearing components.
- Wear and Deterioration:
As ball bearings wear over time, noise levels can increase. Worn components or inadequate lubrication can lead to more significant noise issues as the bearing operates.
To address these challenges and reduce noise in ball bearings, manufacturers and engineers employ various techniques, such as optimizing design, selecting suitable bearing types, using proper lubrication, maintaining accurate preload settings, and ensuring high-quality materials and manufacturing processes. Noise reduction efforts are essential to improve overall product quality, meet noise regulations, and enhance user experience in various applications.
How do Ceramic Ball Bearings Compare to Traditional Steel Ball Bearings in Terms of Performance?
Ceramic ball bearings and traditional steel ball bearings have distinct characteristics that can impact their performance in various applications. Here’s a comparison of how these two types of bearings differ in terms of performance:
- Material Composition:
Ceramic Ball Bearings:
Ceramic ball bearings use ceramic rolling elements, typically made from materials like silicon nitride (Si3N4) or zirconium dioxide (ZrO2). These ceramics are known for their high hardness, low density, and resistance to corrosion and wear.
Traditional Steel Ball Bearings:
Traditional steel ball bearings use steel rolling elements. The type of steel used can vary, but common materials include chrome steel (52100) and stainless steel (440C). Steel bearings are known for their durability and strength.
- Friction and Heat:
Ceramic Ball Bearings:
Ceramic bearings have lower friction coefficients compared to steel bearings. This results in reduced heat generation during operation, contributing to higher efficiency and potential energy savings.
Traditional Steel Ball Bearings:
Steel bearings can generate more heat due to higher friction coefficients. This can lead to increased energy consumption in applications where efficiency is crucial.
- Weight:
Ceramic Ball Bearings:
Ceramic bearings are lighter than steel bearings due to the lower density of ceramics. This weight reduction can be advantageous in applications where minimizing weight is important.
Traditional Steel Ball Bearings:
Steel bearings are heavier than ceramic bearings due to the higher density of steel. This weight may not be as critical in all applications but could impact overall equipment weight and portability.
- Corrosion Resistance:
Ceramic Ball Bearings:
Ceramic bearings have excellent corrosion resistance, making them suitable for applications in corrosive environments, such as marine or chemical industries.
Traditional Steel Ball Bearings:
Steel bearings are susceptible to corrosion, especially in harsh environments. Stainless steel variants offer improved corrosion resistance but may still corrode over time.
- Speed and Precision:
Ceramic Ball Bearings:
Ceramic bearings can operate at higher speeds due to their lower friction and ability to withstand higher temperatures. They are also known for their high precision and low levels of thermal expansion.
Traditional Steel Ball Bearings:
Steel bearings can operate at high speeds as well, but their heat generation may limit performance in certain applications. Precision steel bearings are also available but may have slightly different characteristics compared to ceramics.
- Cost:
Ceramic Ball Bearings:
Ceramic bearings are generally more expensive to manufacture than steel bearings due to the cost of ceramic materials and the challenges in producing precision ceramic components.
Traditional Steel Ball Bearings:
Steel bearings are often more cost-effective to manufacture, making them a more economical choice for many applications.
In conclusion, ceramic ball bearings and traditional steel ball bearings offer different performance characteristics. Ceramic bearings excel in terms of low friction, heat generation, corrosion resistance, and weight reduction. Steel bearings are durable, cost-effective, and widely used in various applications. The choice between the two depends on the specific requirements of the application, such as speed, precision, corrosion resistance, and budget considerations.
What are the Different Components that Make up a Typical Ball Bearing?
A typical ball bearing consists of several essential components that work together to reduce friction and support loads. Here are the main components that make up a ball bearing:
- Outer Ring:
The outer ring is the stationary part of the bearing that provides support and houses the other components. It contains raceways (grooves) that guide the balls’ movement.
- Inner Ring:
The inner ring is the rotating part of the bearing that attaches to the shaft. It also contains raceways that correspond to those on the outer ring, allowing the balls to roll smoothly.
- Balls:
The spherical balls are the rolling elements that reduce friction between the inner and outer rings. Their smooth rolling motion enables efficient movement and load distribution.
- Cage or Retainer:
The cage, also known as the retainer, maintains a consistent spacing between the balls. It prevents the balls from touching each other, reducing friction and preventing jamming.
- Seals and Shields:
Many ball bearings include seals or shields to protect the internal components from contaminants and retain lubrication. Seals provide better protection against contaminants, while shields offer less resistance to rotation.
- Lubricant:
Lubrication is essential to reduce friction, wear, and heat generation. Bearings are typically filled with lubricants that ensure smooth movement between the balls and raceways.
- Flanges and Snap Rings:
In some designs, flanges or snap rings are added to help position and secure the bearing in its housing or on the shaft. Flanges prevent axial movement, while snap rings secure the bearing radially.
- Raceways:
Raceways are the grooved tracks on the inner and outer rings where the balls roll. The shape and design of the raceways influence the bearing’s load-carrying capacity and performance.
- Anti-Friction Shield:
In certain high-speed applications, a thin anti-friction shield can be placed between the inner and outer rings to minimize friction and heat generation.
These components work together to enable the smooth rolling motion, load support, and reduced friction that characterize ball bearings. The proper design and assembly of these components ensure the bearing’s optimal performance and longevity in various applications.
editor by CX 2024-02-23
China factory New arrival 7206b CZPT single row sealed miniature radial axial ceramic mini lathe precision dimensions price thin section angle angular contact ball bearing with Hot selling
Product Description
HXHV High Speed / Ball Screw Support Bearing
Material: Chrome Steel / Stainless Steel rings and balls.
Precesion Range: P5 or P4
OEM Service: Custom bearing’s size, logo, packing.
70 Series (High Speed): contact us for more
| Model Number | Model Number2 | Inner Diameter | Outer Diameter | Width |
| 706C | 706AC | 6 mm | 17 mm | 6 mm |
| 708C | 708AC | 8 mm | 22 mm | 7 mm |
| 7000C | 7000AC | 10 mm | 26 mm | 8 mm |
| 7001C | 7001AC | 12 mm | 28 mm | 8 mm |
| 7002C | 7002AC | 15 mm | 32 mm | 9 mm |
| 7003C | 7003AC | 17 mm | 35 mm | 10 mm |
| 7004C | 7004AC | 20 mm | 42 mm | 12 mm |
| 7005C | 7005AC | 25 mm | 47 mm | 12 mm |
| 7006C | 7006AC | 30 mm | 55 mm | 13 mm |
| 7007C | 7007AC | 35 mm | 62 mm | 14 mm |
72 Series (High Speed): contact us for more
| Model Number | Model Number2 | Inner Diameter | Outer Diameter | Width |
| 7200C | 7200AC | 10 mm | 30 mm | 9 mm |
| 7201C | 7201AC | 12 mm | 32 mm | 10 mm |
| 7202C | 7202AC | 15 mm | 35 mm | 11 mm |
| 7203C | 7203AC | 17 mm | 40 mm | 12 mm |
| 7204C | 7204AC | 20 mm | 47 mm | 14 mm |
| 7205C | 7205AC | 25 mm | 52 mm | 15 mm |
| 7206C | 7206AC | 30 mm | 62 mm | 16 mm |
| 7207C | 7207AC | 35 mm | 72 mm | 17 mm |
| 7208C | 7208AC | 40 mm | 80 mm | 18 mm |
| 7209C | 7209AC | 45 mm | 85 mm | 19 mm |
718 Series (High Speed): contact us for more
| Model Number | Model Number2 | Inner Diameter | Outer Diameter | Width |
| 71800C | 71800AC | 10 mm | 19 mm | 5 mm |
| 71801C | 71801AC | 12 mm | 21 mm | 5 mm |
| 71802C | 71802AC | 15 mm | 24 mm | 5 mm |
| 71803C | 71803AC | 17 mm | 26 mm | 5 mm |
| 71804C | 71804AC | 20 mm | 32 mm | 7 mm |
| 71805C | 71805AC | 25 mm | 37 mm | 7 mm |
| 71806C | 71806AC | 30 mm | 42 mm | 7 mm |
| 71807C | 71807AC | 35 mm | 47 mm | 7 mm |
| 71808C | 71808AC | 40 mm | 52 mm | 7 mm |
| 71809C | 71809AC | 45 mm | 58 mm | 7 mm |
719 Series (High Speed): contact us for more
| Model Number | Model Number2 | Inner Diameter | Outer Diameter | Width |
| 71900C | 71900AC | 10 mm | 22 mm | 6 mm |
| 71901C | 71901AC | 12 mm | 24 mm | 6 mm |
| 71902C | 71902AC | 15 mm | 28 mm | 7 mm |
| 71903C | 71903AC | 17 mm | 30 mm | 7 mm |
| 71904C | 71904AC | 20 mm | 37 mm | 9 mm |
| 71905C | 71905AC | 25 mm | 42 mm | 9 mm |
| 71906C | 71906AC | 30 mm | 47 mm | 9 mm |
| 71907C | 71907AC | 35 mm | 55 mm | 10 mm |
| 71908C | 71908AC | 40 mm | 62 mm | 12 mm |
| 71909C | 71909AC | 45 mm | 68 mm | 12 mm |
TAC Series (Ball screw support): contact us for more
| Model Number | Inner Diameter | Outer Diameter | Width |
| 15TAC47B | 15 mm | 47 mm | 15 mm |
| 17TAC47B | 17 mm | 47 mm | 15 mm |
| 20TAC47B | 20 mm | 47 mm | 15 mm |
| 25TAC62B | 25 mm | 62 mm | 15 mm |
| 30TAC62B | 30 mm | 62 mm | 15 mm |
| 35TAC72B | 35 mm | 72 mm | 15 mm |
| 40TAC72B | 40 mm | 72 mm | 15 mm |
| 40TAC90B | 40 mm | 90 mm | 20 mm |
760 Series (Ball screw support): contact us for more
| Model Number | Inner Diameter | Outer Diameter | Width |
| 7657112 | 12 mm | 32 mm | 10 mm |
| 7657115 | 15 mm | 35 mm | 11 mm |
| 7657117 | 17 mm | 40 mm | 12 mm |
| 7657120 | 20 mm | 47 mm | 14 mm |
| 765711 | 20 mm | 52 mm | 15 mm |
| 7657125 | 25 mm | 52 mm | 15 mm |
| 76 0571 1 | 25 mm | 62 mm | 17 mm |
| 7657130 | 30 mm | 62 mm | 16 mm |
| 7603030 | 30 mm | 72 mm | 19 mm |
| 7657135 | 35 mm | 72 mm | 17 mm |
Packing:
|
Universal Packing |
Without any logo on bearings or packing. |
|
HXHV Packing |
With our brand HXHV on bearings and packing. |
|
Customized Packing |
Depends on buyer’s requirements. |
|
Original Brand Packing |
Bearing and packing are both original. Please contact us for pictures. |
Certificate:
Our bearings comes with CE certificate and our company has been verified by SGS Group. Please contact us for clear certificate photos.
Other Bearings:
We supply different types of ball and roller bearings, slewing bearings, mini bearings, ceramic bearings, Linear guides.
To get price list of promotion bearings, please contact us. /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Contact Angle: | 15° or 25° |
|---|---|
| Aligning: | Aligning Bearing |
| Separated: | Unseparated |
| Rows Number: | Single |
| Load Direction: | Radial Bearing |
| Material: | Bearing Steel |
| Samples: |
US$ 2.5/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What are the Materials Typically Used in Manufacturing Ball Bearings and Their Advantages?
Ball bearings are manufactured using a variety of materials, each chosen for its specific properties and advantages in various applications. Here are some commonly used materials in ball bearing manufacturing and their respective benefits:
- High-Carbon Chrome Steel (AISI 52100):
This is the most common material used for ball bearing manufacturing. It offers excellent hardness, wear resistance, and fatigue strength. High-carbon chrome steel bearings are suitable for a wide range of applications, from industrial machinery to automotive components.
- Stainless Steel (AISI 440C, AISI 304, AISI 316):
Stainless steel bearings are corrosion-resistant and suitable for applications where moisture, chemicals, or exposure to harsh environments are concerns. AISI 440C offers high hardness and corrosion resistance, while AISI 304 and AISI 316 provide good corrosion resistance and are often used in food and medical industries.
- Ceramic:
Ceramic bearings use silicon nitride (Si3N4) or zirconia (ZrO2) balls. Ceramic materials offer high stiffness, low density, and excellent resistance to corrosion and heat. Ceramic bearings are commonly used in high-speed and high-temperature applications, such as in aerospace and racing industries.
- Plastic (Polyamide, PEEK):
Plastic bearings are lightweight and offer good corrosion resistance. Polyamide bearings are commonly used due to their low friction and wear properties. Polyether ether ketone (PEEK) bearings provide high-temperature resistance and are suitable for demanding environments.
- Bronze:
Bronze bearings are often used in applications where self-lubrication is required. Bronze has good thermal conductivity and wear resistance. Bearings made from bronze are commonly used in machinery requiring frequent starts and stops.
- Hybrid Bearings:
Hybrid bearings combine steel rings with ceramic balls. These bearings offer a balance between the advantages of both materials, such as improved stiffness and reduced weight. Hybrid bearings are used in applications where high speeds and low friction are essential.
- Specialty Alloys:
For specific applications, specialty alloys may be used to meet unique requirements. For example, bearings used in extreme temperatures or corrosive environments may be made from materials like titanium or hastelloy.
- Coated Bearings:
Bearings may also be coated with thin layers of materials like diamond-like carbon (DLC) or other coatings to enhance performance, reduce friction, and improve wear resistance.
The choice of material depends on factors such as application requirements, operating conditions, load, speed, and environmental factors. Selecting the right material is essential for ensuring optimal bearing performance, longevity, and reliability in diverse industries and applications.
How do Temperature and Environmental Conditions Affect the Performance of Ball Bearings?
Temperature and environmental conditions have a significant impact on the performance and longevity of ball bearings. The operating environment can influence factors such as lubrication effectiveness, material properties, and overall bearing behavior. Here’s how temperature and environmental conditions affect ball bearing performance:
- Lubrication:
Temperature variations can affect the viscosity and flow characteristics of lubricants. Extreme temperatures can cause lubricants to become too thin or too thick, leading to inadequate lubrication and increased friction. In high-temperature environments, lubricants can degrade, reducing their effectiveness.
- Material Properties:
Temperature changes can alter the material properties of the bearing components. High temperatures can lead to thermal expansion, affecting bearing clearances and potentially causing interference between components. Extreme cold temperatures can make materials more brittle and prone to fracture.
- Clearance Changes:
Temperature fluctuations can cause changes in the internal clearance of ball bearings. For instance, at high temperatures, materials expand, leading to increased clearance. This can affect bearing performance, load distribution, and overall stability.
- Corrosion and Contamination:
Harsh environmental conditions, such as exposure to moisture, chemicals, or abrasive particles, can lead to corrosion and contamination of bearing components. Corrosion weakens the material, while contamination accelerates wear and reduces bearing life.
- Thermal Stress:
Rapid temperature changes can result in thermal stress within the bearing components. Differential expansion and contraction between the inner and outer rings can lead to stress and distortion, affecting precision and bearing integrity.
- Noise and Vibration:
Temperature-related changes in material properties and internal clearances can influence noise and vibration levels. Extreme temperatures can lead to increased noise generation and vibration, affecting the overall operation of machinery.
- Lubricant Degradation:
Environmental factors like humidity, dust, and contaminants can lead to premature lubricant degradation. Oxidation, moisture absorption, and the presence of foreign particles can compromise the lubricant’s performance and contribute to increased friction and wear.
- Seal Effectiveness:
Seals and shields that protect bearings from contaminants can be affected by temperature fluctuations. Extreme temperatures can lead to seal hardening, cracking, or deformation, compromising their effectiveness in preventing contamination.
- Choosing Appropriate Bearings:
When selecting ball bearings for specific applications, engineers must consider the expected temperature and environmental conditions. High-temperature bearings, bearings with specialized coatings, and those with enhanced sealing mechanisms may be necessary to ensure reliable performance.
Overall, understanding the impact of temperature and environmental conditions on ball bearing performance is crucial for proper bearing selection, maintenance, and ensuring optimal operation in diverse industries and applications.
What are the Primary Benefits of Using Ball Bearings in Machinery and Equipment?
Ball bearings offer several primary benefits when used in machinery and equipment. Their design and functionality provide advantages that contribute to the efficient and reliable operation of various applications. Here are the key benefits:
- Reduced Friction:
One of the primary benefits of ball bearings is their ability to minimize friction between moving parts. The rolling motion of the balls reduces the contact area and sliding friction, leading to smoother operation and less energy loss due to frictional heating.
- Efficient Load Support:
Ball bearings are engineered to support both radial and axial loads, making them versatile for applications with multidirectional forces. This load-bearing capability allows machinery to handle different types of loads while maintaining performance and stability.
- Smooth Rotation:
Ball bearings enable smooth and precise rotational movement. The rolling motion of the balls provides consistent motion with minimal resistance, ensuring that machinery operates smoothly and without jerks.
- High-Speed Capability:
Due to their low friction and efficient rolling action, ball bearings are suitable for high-speed applications. They allow machinery and equipment to achieve and maintain high rotational speeds without excessive wear or heat buildup.
- Reduced Wear and Maintenance:
The reduced friction in ball bearings leads to lower wear on components. This results in longer service intervals and reduced maintenance requirements, saving both time and maintenance costs.
- Energy Efficiency:
By minimizing friction and reducing energy losses, ball bearings contribute to the overall energy efficiency of machinery. This is particularly important in applications where energy consumption is a concern.
- Versatility:
Ball bearings come in various types, sizes, and configurations, allowing them to be used in a wide range of machinery and equipment. They can be customized to suit specific application requirements.
- Reliability and Longevity:
Ball bearings are designed to withstand heavy loads and harsh operating conditions. Their durability and resistance to wear ensure reliable performance and an extended operational life.
- Quiet Operation:
Ball bearings contribute to quiet machinery operation due to the smooth rolling motion of the balls. This is particularly important in applications where noise reduction is a consideration.
In summary, the primary benefits of using ball bearings in machinery and equipment include reduced friction, efficient load support, smooth rotation, high-speed capability, reduced wear and maintenance, energy efficiency, versatility, reliability, and quiet operation. These benefits collectively enhance the performance and longevity of machinery across various industries.
editor by CX 2024-01-19