Tag Archives: mechanical bearing

China high quality 6801-RS 12*21*5mm Single Row Thin-Walled Deep Groove Ball Bearings for Mechanical Equipment carrier bearing

Product Description

                                                                    6800 series deep groove ball bearings

Product Description

Deep Groove Ball Bearings

Deep groove ball bearing
This is the most widely used ball bearing type. Trapped between the 2 races is a ring of balls that transmit the load and allows rotational motion between the 2 races. The balls are held in place by a retainer.

They have very low rolling friction and are optimized for low noise and low vibration. This makes them ideal for high-speed applications.

They are comparatively easy to install and require minimal maintenance. Care must be taken during installation to prevent denting of the races as they have to be push fit CZPT shafts.6800 series deep groove ball bearings

Detailed Photos

 

  

Product Parameters

No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
603 3 0.1181  9 0.3543  3 0.1181  5 0.1181  0.2 0.008  486 223 0.0014 
604 4 0.1575  12 0.4724  4 0.1575  4 0.1575  0.2 0.008  960 350 0.571 
605 5 0.1969  14 0.5512  5 0.1969  5 0.1969  0.2 0.008  1070 420 0.0037 
606 6 0.2362  17 0.6693  6 0.2362  6 0.2362  0.3 0.012  1960 730 0.0069 
607 7 0.2756  19 0.7480  6 0.2362  6 0.2362  0.3 0.012  2800 1060 0.0082 
608 8 0.3150  22 0.8661  7 0.2756  7 0.2756  0.3 0.012  3290 1360 0.0129 
609 9 0.3543  24 0.9449  7 0.2756  7 0.2756  0.3 0.012  3330 1410 0.0160 
6000 10 0.3937  26 1.5716  8 0.3150  8 0.3150  0.3 0.012  4160 1780 0.0190 
6001 12 0.4724  28 1.1571  8 0.3150  8 0.3150  0.3 0.012  5110 2380 0.5710 
6002 15 0.5906  32 1.2598  9 0.3543  9 0.3543  0.3 0.012  5590 2840 0.0300 
6003 17 0.6693  35 1.3780  10 0.3937  10 0.3937  0.3 0.012  6000 3250 0.0390 
6004 20 0.7874  42 1.6535  12 0.4724  12 0.4724  0.6 0.571  9390 5571 0.0690 
6005 25 0.9843  47 1.8504  12 0.4724  12 0.4724  0.6 0.571  10060 5860 0.0800 
6006 30 1.1811  55 2.1654  13 0.5118  13 0.5118  1 0.039  11900 7460 0.1160 
6007 35 1.3780  62 2.4409  14 0.5512  14 0.5512  1 0.039  16210 10420 0.1150 
6008 40 1.5748  68 2.6677  15 0.5906  15 0.5906  1 0.039  17030 11700 0.1920 
6009 45 1.7717  75 2.9528  16 0.6299  16 0.6299  1 0.039  21080 14780 0.2450 
6571 50 1.9685  80 3.1496  16 0.6299  16 0.6299  1 0.039  22000 16260 0.2610 
60/22 22 0.8661  44 1.7323  12 0.4724  12 0.4724  0.6 0.571  9400 5050 0.0740 
60/28 28 1.1571  52 2.571  12 0.4724  12 0.4724  0.6 0.571  12500 7400 0.0980 
60/32 32 1.2598  58 2.2835  13 0.5118  13 0.5118  1 0.039  15100 9150 0.1290 

 

No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
623 3 0.1181  10 0.3937  4 0.1575  4 0.1575  0.15 0.006  640 220 0.0016 
624 4 0.1575  13 0.5118  5 0.1969  5 0.1969  0.2 0.008  1150 400 0.0032 
625 5 0.1969  16 0.6299  5 0.1969  5 0.1969  0.3 0.012  1880 680 0.0051 
626 6 0.2362  19 0.7480  6 0.2362  6 0.2362  0.3 0.012  2800 1060 0.  
627 7 0.2756  22 0.8661  7 0.2756  7 0.2756  0.3 0.012  3290 1360 0.0131 
628 8 0.3150  24 0.9449  8 0.3150  8 0.3150  0.3 0.012  3330 1410 0.0170 
629 9 0.3543  26 1.5716  8 0.3150  8 0.3150  0.3 0.012  4160 1780 0.0191 
6200 10 0.3937  30 1.1811  9 0.3543  9 0.3543  0.6 0.571  5110 2380 0.0320 
6201 12 0.4724  32 1.2598  10 0.3937  10 0.3937  0.6 0.571  6180 3060 0.571 
6202 15 0.5906  35 1.3780  11 0.4331  11 0.4331  0.6 0.571  7450 3700 0.0450 
6203 17 0.6693  40 1.5748  12 0.4724  12 0.4724  0.6 0.571  9560 4780 0.0650 
6204 20 0.7874  47 1.8504  14 0.5512  14 0.5512  1 0.039  12840 6650 0.1060 
6205 25 0.9843  52 2.571  15 0.5906  15 0.5906  1 0.039  14571 7930 0.1280 
6206 30 1.1811  62 2.4409  16 0.6299  16 0.6299  1 0.039  19460 11310 0.1990 
6207 35 1.3780  72 2.8346  17 0.6693  17 0.6693  1.1 0.043  25670 15300 0.2880 
6208 40 1.5748  80 3.1496  18 0.7087  18 0.7087  1.1 0.043  29520 18140 0.3660 

 

No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
633 3 0.1181  13 0.5118  5 0.1969  5 0.1969  0.2 0.008  1300 485 0.0034 
634 4 0.1575  16 0.6299  5 0.1969  5 0.1969  0.3 0.012  1880 680 0.0054 
635 5 0.1969  19 0.7480  6 0.2362  6 0.2362  0.3 0.012  2810 1060 0.0089 
636 6 0.2362  22 0.8661  7 0.2756  7 0.2756  0.3 0.012  3290 1360 0.0145 
637 7 0.2756  26 1.5716  9 0.3543  9 0.3543  0.3 0.012  3340 1410 0.5718 
638 8 0.3150  28 1.1571  9 0.3543  9 0.3543  0.3 0.012  4160 1780 0.0303 
639 9 0.3543  30 1.1811  10 0.3937  10 0.3937  0.6 0.571  5120 2390 0.571 
6300 10 0.3937  35 1.3780  11 0.4331  11 0.4331  0.6 0.571  7640 3470 0.571 
6301 12 0.4724  37 1.4567  12 0.4724  12 0.4724  1 0.039  9700 4190 0.0600 
6302 15 0.5906  42 1.6535  13 0.5118  13 0.5118  1 0.039  11400 5430 0.0820 
6303 17 0.6693  47 1.8504  14 0.5512  14 0.5512  1 0.039  13580 6580 0.1150 
6304 20 0.7874  52 2.0742  15 0.5906  15 0.5906  1.1 0.043  15940 7880 0.1490 
6305 25 0.9843  62 2.4409  17 0.6693  17 0.6693  1.1 0.043  22380 11490 0.2320 
6306 30 1.1811  72 2.8346  19 0.7480  19 0.7480  1.1 0.043  27000 15200 0.3490 
63/22 22 0.8661  56 2.2047  16 0.6299  16 0.6299  1.1 0.043  18400 9250 0.1760 
63/28 28 1.1571  68 2.6772  18 0.7087  18 0.7087  1.1 0.043  26800 14000 0.2870 
63/32 32 1.2598  75 2.9528  20 0.7874  20 0.7874  1.1 0.043  30000 16200 0.3820 

 

No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
683 3 0.1181  7 0.2756  2 0.0787  3 0.1181  0.1 0.004  420 135 0.571 
684 4 0.1575  9 0.3543  2.5 0.0984  4 0.1575  0.1 0.004  480 170 0.571 
685 5 0.1969  11 0.4331  3 0.1181  5 0.1969  0.15 0.006  770 320 0.0019 
686 6 0.2362  13 0.5118  3.5 0.1378  5 0.1969  0.15 0.006  1080 440 0.0571 
687 7 0.2756  14 0.5512  3.5 0.1378  5 0.1969  0.15 0.006  1170 510 0.0030 
688 8 0.3150  16 0.6299  4 0.1575  5 0.1969  0.2 0.008  1250 590 0.0038 
689 9 0.3543  17 0.6693  4 0.1575  5 0.1969  0.2 0.008  1330 660 0.0440 
6800 10 0.3937  19 0.7480  5 0.1969  5 0.1969  0.3 0.012  1590 750 0.0050 
6801 12 0.4724  21 0.8268  5 0.1969  5 0.1969  0.3 0.012  1910 1040 0.0060 
6802 15 0.5906  24 0.9449  5 0.1969  5 0.1969  0.3 0.012  2070 1250 0.0070 
6803 17 0.6693  26 1.5716  5 0.1969  5 0.1969  0.3 0.012  2130 1360 0.0080 
6804 20 0.7874  32 1.2598  7 0.2756  7 0.2756  0.3 0.012  3480 2230 0.0190 
6805 25 0.9843  37 1.4567  7 0.2756  7 0.2756  0.3 0.012  3680 2630 0.5710 
6806 30 1.1811  42 1.6535  7 0.2756  7 0.2756  0.3 0.012  4000 3150 0.0260 
6807 35 1.3780  47 1.8504  7 0.2756  7 0.2756  0.3 0.012  4270 3600 0.5710 
6808 40 1.5748  52 2.571  7 0.2756  7 0.2756  0.3 0.012  4410 3890 0.0330 
6809 45 1.7717  58 2.2835  7 0.2756  7 0.2756  0.3 0.012  4590 4330 0.0400 
6810 50 1.9685  65 2.5591  7 0.2756  7 0.2756  0.3 0.012  6610 6080 0.0520 
6811 55 2.1654  72 2.3846  9 0.3543  9 0.3543  0.3 0.012  8530 8080 0. 0571  
6812 60 2.3622  78 3.0709  10 0.3937  10 0.3937  0.3 0.012  9200 8760 0.1060 
6813 65 2.5591  85 3.3465  10 0.3937  10 0.3937  0.6 0.571  1571 9420 0.1250 
6814 70 2.7559  90 3.5433  10 0.3937  10 0.3937  0.6 0.571  1571 10090 0.1350 
6815 75 2.9528  95 3.7402  10 0.3937  10 0.3937  0.6 0.571  11230 1571 0.1450 
6816 80 3.1496  100 3.9370  10 0.3937  10 0.3937  0.6 0.571  11320 11080 0.1550 
6817 85 3.3465  110 4.3307  13 0.5118  13 0.5118  1 0.039  17599 18300 0.2650 
6818 90 3.5433  115 4.5276  13 0.5118  13 0.5118  1 0.039  17853 18961 0.2800 

 

No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
6819 95 3.7402  120 4.7244  13 0.5118  13 0.5118  1 0.0390  18089 19616 0.2980 
6820 100 3.9370  125 4.9213  13 0.5118  13 0.5118  1 0.0390  18340 20266 0.3110 
6821 105 4.1339  130 5.1181  13 0.5118  13 0.5118  1 0.0390  18912 20924 0.3250 
6822 110 4.3307  140 5.5118  16 0.6299  16 0.6299  1 0.0390  28100 30700 0.5100 
6824 120 4.7244  150 5.9055  16 0.6299  16 0.6299  1 0.0390  28900 32900 0.5490 
6826 130 5.1181  165 6.4961  18 0.7087  18 0.7087  1.1 0.0430  37900 42900 0.7900 
6828 140 5.1181  175 6.8898  18 0.7087  18 0.7087  1 0. 0571   38200 44300 0.9900 
6830 150 5.9055  190 7.4803  20 0.7874  20 0.7874  1 0. 0571   49100 57100 1.5000 
6832 160 6.2992  200 7.8740  20 0.7874  20 0.7874  1 0. 0571   49600 59100 1.7000 
6834 170 6.6929  215 8.4646  22 0.8661  22 0.8661  1 0. 0571   61500 73300 1.9000 
6836 180 7.0866  225 8.8582  22 0.8661  22 0.8661  1 0. 0571   62300 75900 2.0000 
6838 190 7.4803  240 9.4480  24 0.9449  24 0.9449  1.5 0.0590  75100 91600 2.1000 
6840 200 7.8740  250 9.8425  24 0.9449  24 0.9449  1.5 0.0590  74200 91200 2.3800 
6844 220 8.6614  270 10.6299  24 0.9499  – – 1.5 0.0590  76400 97800 2.7900 
6848 240 9.4488  300 11.8110  28 1.1571  – – 2 0.0787  83500 108000 4.5000 
6852 260 10.2362  320 12.5984  28 1.1571  – – 2 0.0787  95000 128000 4.8500 
6856 280 11.5716  350 13.7795  33 1.2992  – – 2 0.0787  135000 178000 7.6000 
6860 300 11.8110  380 14.9606  38 1.4960  – – 2 0.0787  162000 222000 11.0000 
6864 320 12.5984  400 15.7480  38 1.4960  – – 2 0.0787  168000 235000 12.0000 
6872 360 14.1732  440 17.3228  38 1.4960  – – 2.5 0.0984  – – 12.2000 
6876 380 14.9606  480 18.8976  46 1.8110  – – 2.5 0.0984  168000 235000 20.5000 
6880 400 15.7480  500 19.6850  46 1.8110  – – 2.5 0.0984  – – 21.7000 
6884 420 16.5354  520 20.4724  46 1.8110  – – 2.5 0.1377  251000 425000 22.0000 
6888 440 17.3228  540 21.2598  46 1.8110  – – 2.5 0.0984  – – 24.0000 
6892 460 18.1102  580 22.8346  56 2.2047  – – 3 0.1181  – – 33.5000 

 

No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
693 3 0.1181  8 0.3150  3 0.1181  4 0.1575  0.15 0.006  430 170 0.0008 
694 4 0.1575  11 0.4331  4 0.1575  4 0.1575  0.15 0.006  960 350 0.0017 
695 5 0.1969  13 0.5118  4 0.1575  4 0.1575  0.2 0.008  1070 420 0.571 
696 6 0.2362  15 0.5906  5 0.1969  5 0.1969  0.2 0.008  1470 600 0.0036 
697 7 0.2756  17 0.6693  5 0.1969  5 0.1969  0.3 0.012  1600 710 0.0050 
698 8 0.3150  19 0.7480  6 0.2362  6 0.2362  0.3 0.012  2230 910 0.0076 
699 9 0.3543  20 0.7874  6 0.2362  6 0.2362  0.3 0.012  2480 1090 0.0085 
6900 10 0.3937  22 0.8661  6 0.2362  6 0.2362  0.3 0.012  2690 1270 0.5710 
6901 12 0.4724  24 0.9449  6 0.2362  6 0.2362  0.3 0.012  2890 1460 0.0120 
6902 15 0.5906  28 1.1571  7 0.2756  7 0.2756  0.3 0.012  4320 2250 0.0180 
6903 17 0.6693  30 1.1811  7 0.2756  7 0.2756  0.3 0.012  4590 2550 0.0190 
6904 20 0.7874  37 1.4567  9 0.3543  9 0.3543  0.3 0.012  6370 3680 0.0380 
6905 25 0.9843  42 1.6535  9 0.3543  9 0.3543  0.3 0.012  6660 4180 0.0440 
6906 30 1.1811  47 1.8504  9 0.3543  9 0.3543  0.3 0.012  7240 5571 0.0500 
6907 35 1.3780  55 2.1654  10 0.3543  10 0.3937  0.6 0.571  10390 7160 0.7500 
6908 40 1.5748  62 2.4409  12 0.3937  12 0.4724  0.6 0.571  13571 9200 0.1180 
6909 45 1.7717  68 2.6772  12 0.4724  12 0.4724  0.6 0.571  13490 10130 0.1280 
6910 50 1.9685  72 2.8346  12 0.4724  12 0.4724  0.6 0.571  13900 1571 0.1330 
6911 55 2.1654  80 3.1496  13 0.4724  13 0.5118  1 0.039  14820 12690 0.1770 
6912 60 2.3622  85 3.3465  13 0.5118  13 0.5118  1 0.039  15080 13480 0.1910 
6913 65 2.5591  90 3.5433  13 0.5118  13 0.5118  1 0.039  19950 17490 0.2000 
6914 70 2.7559  100 3.9370  16 0.6299  16 0.6299  1 0.039  25950 21850 0.3270 
6915 75 2.9528  105 4.1339  16 0.6299  16 0.6299  1 0.039  26780 23560 0.3450 
6916 80 3.1496  110 4.3307  16 0.6299  16 0.6299  1 0.039  27590 25280  0.3630 
6917 85 3.3465  120 4.7244  18 0.7087  18 0.7087 1.1 0.043  31900 29700 0.5170 

 

Product Applications

 

Company Profile

 

ZheJiang Jieyi Bearing Co., Ltd. is a more than 10-year history of bearing trading company. We are located in the biggest bearing town in China–Yiandian Town.

Our products include: Deep Groove Ball Bearings, Self-aligning Ball Bearings, Spherical Bearings, Tapered Roller Bearings, Cylindrical Roller Bearings, Needle Roller Bearings, Self-aligning Roller Bearings, Angular Contact Ball Bearings, Thrust Ball Bearings, Trust Roller Bearings and Special Bearings.

Jieyi Bearing has advanced quality testing and inspecting equipment, to guarantee product quality meets customers’ demand. Annually our company′ S export over 10 million dollars.

To service dear customers at the fastest speed, we built a great Warehouse to stock bearings, so as to ship your required bearings fast. Inside of the bearing warehouse, there is all sourcing of bearing stock, with all kinds of bearings, over 10000 types.

Jieyi Bearing also provides OEM service, such as bearing quality, noise level, grease brand, packing method, etc. We have enough OEM experience, and have a complete OEM manual for customer reference.

Products have been selling well in the American, French, Spanish, Austria, Italian, the U. A. E. Saudi, Pakistan, India, and Brizal markets.

With over 10 years′ Experience in bearings market, Jieyi Bearing have built up good relationship with all of our customers and quality factory. We always get satisfactory feedback from our customers because of the high quality products and good OEM service. We always supply the quality, stable, economical bearings and proper technical services.

Welcome to people of various enterprises with advance!

 

 

Our Advantages

WHY CHOOSE US?

 

1. BETTER COMMUNICATION

JVZB Bearing understands customer service more so than factories, we focus entirely on the customer so it is often easier to communicate with you.
 

2. FAVORABLE PRICING

JVZB Beaing often uses factories that are not big enough to have their own international sales team or export license. This means: we can work with factories that have lower prices than some easy-to-find competitors online.
 

3. LOW MOQ

We have great relationships with factories or have product stock on hand, CZPT to offer lower order quantities for the small sized importer.
 

4. SUPPLIER VERIFICATION

JVZB Bearing have more than 10 years of long-standing relationships with the factories, so we are aware of the capabilities of each. If you need, we can visit the factory to carry out product inspections and check up on an order.  
 

5. QC CONTROL

JVZB Bearing have our own quality inspection laboratory with advanced testing equipment, we are CZPT to reasonably ensure the quality of the finished products.
 

6. MULTIPLE VARIETY PURCHASE

In fact, bearing factories usually only produce 1 type of bearing, or even focus on producing several models.  If you want multiple items sourced for 1 product,  we can help. This is a great way to source more products and do so quickly and efficiently.
 

7. OEM or OEM SERVICE

If you need special package or special labeling, we are glad to support OEM or OEM service.

 

Product List

Deeo Groove Ball Bearing

 

Spherical Roller Bearing

 

Taper Roller Bearing

 

Needle Roller Bearing

 

Pillow Block Bearing

 

Ceramic Bearing

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rolling Body: Ball Bearings
The Number of Rows: Single
Outer Dimension: Small (28-55mm)
Samples:
US$ 0.1/Piece
1 Piece(Min.Order)

|

Order Sample

Ball bearings
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.





about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

ball bearing

Are there Specific Maintenance Practices to Ensure the Longevity of Ball Bearings?

Maintaining ball bearings is essential to ensure their longevity, reliable performance, and prevent premature failure. Proper maintenance practices can extend the lifespan of ball bearings and the equipment they are used in. Here are specific maintenance practices to consider:

  • Regular Lubrication:

Implement a regular lubrication schedule using the appropriate lubricant for the application. Lubrication reduces friction, prevents wear, and helps dissipate heat. Follow manufacturer guidelines for lubricant type, quantity, and frequency.

  • Clean Environment:

Keep the operating environment clean and free from contaminants. Dust, dirt, and debris can infiltrate bearings and cause damage. Use seals or shields to protect bearings from contaminants, especially in harsh environments.

  • Proper Installation:

Ensure correct installation of bearings using proper tools and techniques. Improper installation can lead to misalignment, uneven load distribution, and premature wear. Follow manufacturer recommendations for installation procedures.

  • Regular Inspections:

Perform routine visual inspections to check for signs of wear, damage, or contamination. Regular inspections can help identify issues early and prevent further damage. Pay attention to noise, vibration, and temperature changes.

  • Temperature Monitoring:

Monitor bearing temperatures during operation using infrared thermometers or sensors. Abnormal temperature increases can indicate inadequate lubrication, misalignment, or other problems.

  • Correct Handling:

Handle bearings with care to prevent damage during storage, transportation, and installation. Avoid dropping or subjecting them to impacts that can affect their internal components.

  • Bearing Removal and Replacement:

Follow proper procedures when removing and replacing bearings. Use appropriate tools and techniques to avoid damage to the bearing or the surrounding components.

  • Alignment Maintenance:

Maintain proper shaft and housing alignment to prevent excessive loads and wear on the bearing. Misalignment can lead to increased stress and premature failure.

  • Training and Education:

Provide training to operators and maintenance personnel on proper bearing maintenance and handling practices. Educated personnel are more likely to identify issues and perform maintenance correctly.

  • Documented Records:

Keep records of maintenance activities, inspections, lubrication schedules, and any issues encountered. This documentation helps track the bearing’s performance over time and informs future maintenance decisions.

By implementing these maintenance practices, you can ensure the longevity of ball bearings, minimize downtime, reduce operational costs, and maintain the reliability of the equipment they are a part of.

ball bearing

What Precautions should be taken to Prevent Contamination of Ball Bearings in Industrial Settings?

Preventing contamination of ball bearings is essential to ensure their proper function, longevity, and overall performance in industrial settings. Contaminants such as dust, dirt, debris, and particles can significantly impact bearing operation. Here are important precautions to take to prevent contamination of ball bearings:

  • Effective Sealing:

Choose ball bearings with appropriate seals or shields to prevent the ingress of contaminants. Seals provide a physical barrier against dust, moisture, and particles, ensuring the bearing’s interior remains clean.

  • Clean Environment:

Maintain a clean working environment around the machinery and equipment. Regularly clean the surrounding areas to prevent the accumulation of dirt and debris that could enter the bearings.

  • Proper Handling:

Handle bearings with clean hands and use gloves if necessary. Avoid touching the bearing surfaces with bare hands, as natural skin oils can transfer contaminants onto the bearing.

  • Clean Tools and Equipment:

Use clean tools and equipment during installation and maintenance to prevent introducing contaminants. Ensure that tools are properly cleaned before coming into contact with the bearing components.

  • Contamination-Controlled Workstations:

Establish contamination-controlled workstations for bearing handling, installation, and maintenance. These areas should have proper ventilation, filtered air, and minimal exposure to external contaminants.

  • Proper Lubrication:

Use the correct lubricant in appropriate quantities. Lubricants help create a barrier against contaminants and reduce friction. Regularly inspect and replenish lubrication to maintain its effectiveness.

  • Regular Inspections:

Implement a routine inspection schedule to monitor the condition of the bearings. Look for signs of contamination, wear, and damage. Address any issues promptly to prevent further damage.

  • Training and Education:

Train personnel on proper handling, installation, and maintenance practices to minimize the risk of contamination. Educated employees are more likely to take precautions and prevent accidental contamination.

  • Environmental Controls:

In sensitive environments, such as clean rooms or medical facilities, implement strict environmental controls to minimize the presence of contaminants that could affect bearing performance.

  • Regular Cleaning and Maintenance:

Perform regular cleaning and maintenance of machinery and equipment to prevent the buildup of contaminants. Keep bearings protected during maintenance to prevent debris from entering during the process.

  • Selection of Suitable Bearings:

Choose bearings that are specifically designed for the application’s environmental conditions. Some bearings have advanced sealing options or specialized coatings that enhance contamination resistance.

By implementing these precautions, industries can significantly reduce the risk of contamination in ball bearings, ensuring smooth operation, extended bearing life, and enhanced equipment reliability.

ball bearing

How does Lubrication Impact the Performance and Lifespan of Ball Bearings?

Lubrication plays a critical role in the performance and lifespan of ball bearings. Proper lubrication ensures smooth operation, reduces friction, minimizes wear, and prevents premature failure. Here’s how lubrication impacts ball bearings:

  • Friction Reduction:

Lubrication creates a thin film between the rolling elements (balls) and the raceways of the bearing. This film reduces friction by separating the surfaces and preventing direct metal-to-metal contact. Reduced friction results in lower energy consumption, heat generation, and wear.

  • Wear Prevention:

Lubricants create a protective barrier that prevents wear and damage to the bearing’s components. Without proper lubrication, the repeated rolling and sliding of the balls against the raceways would lead to accelerated wear, surface pitting, and eventual failure.

  • Heat Dissipation:

Lubricants help dissipate heat generated during operation. The rolling elements and raceways can generate heat due to friction. Adequate lubrication carries away this heat, preventing overheating and maintaining stable operating temperatures.

  • Corrosion Resistance:

Lubrication prevents moisture and contaminants from coming into direct contact with the bearing’s surfaces. This helps protect the bearing against corrosion, rust, and the formation of debris that can compromise its performance and longevity.

  • Noise Reduction:

Lubricated ball bearings operate quietly because the lubricant cushions and dampens vibrations caused by the rolling motion. This noise reduction is crucial in applications where noise levels need to be minimized.

  • Seal Protection:

Lubricants help maintain the effectiveness of seals or shields that protect the bearing from contaminants. They create a barrier that prevents particles from entering the bearing and causing damage.

  • Improved Efficiency:

Properly lubricated ball bearings operate with reduced friction, leading to improved overall efficiency. This is especially important in applications where energy efficiency is a priority.

  • Lifespan Extension:

Effective lubrication significantly extends the lifespan of ball bearings. Bearings that are properly lubricated experience less wear, reduced fatigue, and a lower likelihood of premature failure.

  • Selection of Lubricant:

Choosing the right lubricant is essential. Factors such as speed, temperature, load, and environmental conditions influence the choice of lubricant type and viscosity. Some common lubricant options include grease and oil-based lubricants.

  • Regular Maintenance:

Regular lubrication maintenance is crucial to ensure optimal bearing performance. Bearings should be inspected and relubricated according to manufacturer recommendations and based on the application’s operating conditions.

In summary, proper lubrication is essential for the optimal performance, longevity, and reliability of ball bearings. It reduces friction, prevents wear, dissipates heat, protects against corrosion, and contributes to smooth and efficient operation in various industrial and mechanical applications.

China high quality 6801-RS 12*21*5mm Single Row Thin-Walled Deep Groove Ball Bearings for Mechanical Equipment carrier bearingChina high quality 6801-RS 12*21*5mm Single Row Thin-Walled Deep Groove Ball Bearings for Mechanical Equipment carrier bearing
editor by CX 2024-05-14

China wholesaler Thin-Walled Deep Groove Ball Bearing 6830 Zz/2RS 150*190*20mm for Mechanical Accessories bearing engineering

Product Description

Detailed Photos

Product Parameters

No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
683 3 0.1181  7 0.2756  2 0.0787  3 0.1181  0.1 0.004  420 135 0.571 
684 4 0.1575  9 0.3543  2.5 0.0984  4 0.1575  0.1 0.004  480 170 0.571 
685 5 0.1969  11 0.4331  3 0.1181  5 0.1969  0.15 0.006  770 320 0.0019 
686 6 0.2362  13 0.5118  3.5 0.1378  5 0.1969  0.15 0.006  1080 440 0.0571 
687 7 0.2756  14 0.5512  3.5 0.1378  5 0.1969  0.15 0.006  1170 510 0.0030 
688 8 0.3150  16 0.6299  4 0.1575  5 0.1969  0.2 0.008  1250 590 0.0038 
689 9 0.3543  17 0.6693  4 0.1575  5 0.1969  0.2 0.008  1330 660 0.0440 
6800 10 0.3937  19 0.7480  5 0.1969  5 0.1969  0.3 0.012  1590 750 0.0050 
6801 12 0.4724  21 0.8268  5 0.1969  5 0.1969  0.3 0.012  1910 1040 0.0060 
6802 15 0.5906  24 0.9449  5 0.1969  5 0.1969  0.3 0.012  2070 1250 0.0070 
6803 17 0.6693  26 1.5716  5 0.1969  5 0.1969  0.3 0.012  2130 1360 0.0080 
6804 20 0.7874  32 1.2598  7 0.2756  7 0.2756  0.3 0.012  3480 2230 0.0190 
6805 25 0.9843  37 1.4567  7 0.2756  7 0.2756  0.3 0.012  3680 2630 0.5710 
6806 30 1.1811  42 1.6535  7 0.2756  7 0.2756  0.3 0.012  4000 3150 0.0260 
6807 35 1.3780  47 1.8504  7 0.2756  7 0.2756  0.3 0.012  4270 3600 0.5710 
6808 40 1.5748  52 2.571  7 0.2756  7 0.2756  0.3 0.012  4410 3890 0.0330 
6809 45 1.7717  58 2.2835  7 0.2756  7 0.2756  0.3 0.012  4590 4330 0.0400 
6810 50 1.9685  65 2.5591  7 0.2756  7 0.2756  0.3 0.012  6610 6080 0.0520 
6811 55 2.1654  72 2.3846  9 0.3543  9 0.3543  0.3 0.012  8530 8080 0. 0571  
6812 60 2.3622  78 3.0709  10 0.3937  10 0.3937  0.3 0.012  9200 8760 0.1060 
6813 65 2.5591  85 3.3465  10 0.3937  10 0.3937  0.6 0.571  1571 9420 0.1250 
6814 70 2.7559  90 3.5433  10 0.3937  10 0.3937  0.6 0.571  1571 10090 0.1350 
6815 75 2.9528  95 3.7402  10 0.3937  10 0.3937  0.6 0.571  11230 1571 0.1450 
6816 80 3.1496  100 3.9370  10 0.3937  10 0.3937  0.6 0.571  11320 11080 0.1550 
6817 85 3.3465  110 4.3307  13 0.5118  13 0.5118  1 0.039  17599 18300 0.2650 
6818 90 3.5433  115 4.5276  13 0.5118  13 0.5118  1 0.039  17853 18961 0.2800 

 

No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
6819 95 3.7402  120 4.7244  13 0.5118  13 0.5118  1 0.0390  18089 19616 0.2980 
6820 100 3.9370  125 4.9213  13 0.5118  13 0.5118  1 0.0390  18340 20266 0.3110 
6821 105 4.1339  130 5.1181  13 0.5118  13 0.5118  1 0.0390  18912 20924 0.3250 
6822 110 4.3307  140 5.5118  16 0.6299  16 0.6299  1 0.0390  28100 30700 0.5100 
6824 120 4.7244  150 5.9055  16 0.6299  16 0.6299  1 0.0390  28900 32900 0.5490 
6826 130 5.1181  165 6.4961  18 0.7087  18 0.7087  1.1 0.0430  37900 42900 0.7900 
6828 140 5.1181  175 6.8898  18 0.7087  18 0.7087  1 0. 0571   38200 44300 0.9900 
6830 150 5.9055  190 7.4803  20 0.7874  20 0.7874  1 0. 0571   49100 57100 1.5000 
6832 160 6.2992  200 7.8740  20 0.7874  20 0.7874  1 0. 0571   49600 59100 1.7000 
6834 170 6.6929  215 8.4646  22 0.8661  22 0.8661  1 0. 0571   61500 73300 1.9000 
6836 180 7.0866  225 8.8582  22 0.8661  22 0.8661  1 0. 0571   62300 75900 2.0000 
6838 190 7.4803  240 9.4480  24 0.9449  24 0.9449  1.5 0.0590  75100 91600 2.1000 
6840 200 7.8740  250 9.8425  24 0.9449  24 0.9449  1.5 0.0590  74200 91200 2.3800 
6844 220 8.6614  270 10.6299  24 0.9499  – – 1.5 0.0590  76400 97800 2.7900 
6848 240 9.4488  300 11.8110  28 1.1571  – – 2 0.0787  83500 108000 4.5000 
6852 260 10.2362  320 12.5984  28 1.1571  – – 2 0.0787  95000 128000 4.8500 
6856 280 11.5716  350 13.7795  33 1.2992  – – 2 0.0787  135000 178000 7.6000 
6860 300 11.8110  380 14.9606  38 1.4960  – – 2 0.0787  162000 222000 11.0000 
6864 320 12.5984  400 15.7480  38 1.4960  – – 2 0.0787  168000 235000 12.0000 
6872 360 14.1732  440 17.3228  38 1.4960  – – 2.5 0.0984  – – 12.2000 
6876 380 14.9606  480 18.8976  46 1.8110  – – 2.5 0.0984  168000 235000 20.5000 
6880 400 15.7480  500 19.6850  46 1.8110  – – 2.5 0.0984  – – 21.7000 
6884 420 16.5354  520 20.4724  46 1.8110  – – 2.5 0.1377  251000 425000 22.0000 
6888 440 17.3228  540 21.2598  46 1.8110  – – 2.5 0.0984  – – 24.0000 
6892 460 18.1102  580 22.8346  56 2.2047  – – 3 0.1181  – – 33.5000 

 

Packaging & Shipping

Packaging Details
1.plastic tube + carton box + woven bag + pallet
2.Can be based on customer requires

Company Profile

ZheJiang Jieyi Bearing Co., Ltd. is a more than 10-year history of bearing trading company. We are located in the biggest bearing town in China–Yiandian Town.

Our products include: Deep Groove Ball Bearings, Self-aligning Ball Bearings, Spherical Bearings, Tapered Roller Bearings, Cylindrical Roller Bearings, Needle Roller Bearings, Self-aligning Roller Bearings, Angular Contact Ball Bearings, Thrust Ball Bearings and Trust Roller Bearings and Special Bearings. 

Jieyi Bearing has advanced quality testing and inspecting equipment, to guarantee product quality meets customers’ demand. Annually our company′s export over 10 million dollars.

To service dear customers at the fastest speed, we built a great Warehouse to stock bearings, so as to ship your required bearings fast. Inside of the bearing warehouse, there is all sourcing of bearing stock, with all kinds of bearings, over 10000 types. 

Jieyi Bearing also provides OEM service, such as bearing quality, noise level, grease brand, packing method, etc. We have enough OEM experience, and have a complete OEM manual for customer reference.
Products have been selling well in the American, French, Spanish, Austria, Italian, the U. A. E. Saudi, Pakistan, India, and Brizal markets.

With over 10 years′ experience in bearings market, Jieyi Bearing have built up good relationship with all of our customers and quality factory. We always get satisfactory feedback from our customers because of the high quality products and good OEM service. We always supply the quality, stable, economical bearings and proper technical services. 

Welcome to people of various enterprises with advance!

FAQ

1. HOW CAN WE GUARANTEE QUALITY?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

2. WHAT CAN YOU BUY FROM US?
Deep Groove Ball Bearings, Spherical Roller Bearings, Cylindrical Roller Bearings, Tapered Roller Bearings and Ceramic Bearings.

Specilizing In various types of bearings

3. WHAT SERVICES CAN WE PROVIDE?
Accepted Delivery Terms: FOB,CFR,CIF;
Accepted Payment Currency: USD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken: English,Chinese

More Products

Application

Specific applications of deep groove ball bearings.
Aircraft models, remote control cars, machine tools, motors, pumps, agricultural machinery, textile machinery, laser printers, instruments, measuring instruments, electronic parts, etc.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Contact Angle: 15°
Aligning: Aligning Bearing
Separated: Separated
Rows Number: Single
Load Direction: Radial Bearing
Material: Bearing Steel
Samples:
US$ 0.2/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

ball bearing

Are there Specific Maintenance Practices to Ensure the Longevity of Ball Bearings?

Maintaining ball bearings is essential to ensure their longevity, reliable performance, and prevent premature failure. Proper maintenance practices can extend the lifespan of ball bearings and the equipment they are used in. Here are specific maintenance practices to consider:

  • Regular Lubrication:

Implement a regular lubrication schedule using the appropriate lubricant for the application. Lubrication reduces friction, prevents wear, and helps dissipate heat. Follow manufacturer guidelines for lubricant type, quantity, and frequency.

  • Clean Environment:

Keep the operating environment clean and free from contaminants. Dust, dirt, and debris can infiltrate bearings and cause damage. Use seals or shields to protect bearings from contaminants, especially in harsh environments.

  • Proper Installation:

Ensure correct installation of bearings using proper tools and techniques. Improper installation can lead to misalignment, uneven load distribution, and premature wear. Follow manufacturer recommendations for installation procedures.

  • Regular Inspections:

Perform routine visual inspections to check for signs of wear, damage, or contamination. Regular inspections can help identify issues early and prevent further damage. Pay attention to noise, vibration, and temperature changes.

  • Temperature Monitoring:

Monitor bearing temperatures during operation using infrared thermometers or sensors. Abnormal temperature increases can indicate inadequate lubrication, misalignment, or other problems.

  • Correct Handling:

Handle bearings with care to prevent damage during storage, transportation, and installation. Avoid dropping or subjecting them to impacts that can affect their internal components.

  • Bearing Removal and Replacement:

Follow proper procedures when removing and replacing bearings. Use appropriate tools and techniques to avoid damage to the bearing or the surrounding components.

  • Alignment Maintenance:

Maintain proper shaft and housing alignment to prevent excessive loads and wear on the bearing. Misalignment can lead to increased stress and premature failure.

  • Training and Education:

Provide training to operators and maintenance personnel on proper bearing maintenance and handling practices. Educated personnel are more likely to identify issues and perform maintenance correctly.

  • Documented Records:

Keep records of maintenance activities, inspections, lubrication schedules, and any issues encountered. This documentation helps track the bearing’s performance over time and informs future maintenance decisions.

By implementing these maintenance practices, you can ensure the longevity of ball bearings, minimize downtime, reduce operational costs, and maintain the reliability of the equipment they are a part of.

ball bearing

Are there any Industry Standards or Certifications that Ball Bearings should Meet?

Yes, there are several industry standards and certifications that ball bearings should meet to ensure their quality, performance, and reliability. These standards help manufacturers, engineers, and customers assess the suitability of bearings for specific applications. Some of the key standards and certifications for ball bearings include:

  • ISO Standards:

The International Organization for Standardization (ISO) has developed a series of standards related to ball bearings. ISO 15 defines dimensions, boundary dimensions, and tolerances for radial bearings. ISO 281 specifies dynamic load ratings and calculation methods for bearings’ life calculations.

  • ABEC (Annular Bearing Engineering Committee) Ratings:

ABEC ratings are commonly used in North America to indicate the precision and performance of ball bearings. Ratings range from ABEC 1 (lowest precision) to ABEC 9 (highest precision). However, it’s important to note that ABEC ratings focus primarily on dimensional tolerances and do not encompass all aspects of bearing quality.

  • DIN Standards:

The German Institute for Standardization (Deutsches Institut für Normung, DIN) has published various standards related to ball bearings. DIN 625 covers dimensions for deep groove ball bearings, while DIN 616 provides guidelines for precision angular contact ball bearings.

  • JIS (Japanese Industrial Standards):

JIS standards are used in Japan and internationally to define the characteristics and dimensions of various products, including ball bearings. JIS B 1512 outlines the classification and dimensions of rolling bearings.

  • ASTM (American Society for Testing and Materials) Standards:

ASTM has standards that cover various aspects of bearing testing, performance, and materials. ASTM F2215, for instance, specifies the requirements for ball bearings used in surgical implants.

  • CE Marking:

CE marking indicates that a product complies with European Union health, safety, and environmental requirements. It may be required for bearings used in machinery intended to be sold within the EU market.

  • Industry-Specific Standards:

Various industries, such as aerospace, automotive, medical, and nuclear, have specific standards or certifications that bearings must meet to ensure safety, reliability, and compliance with industry-specific requirements.

  • Quality Management Systems:

Manufacturers that adhere to quality management systems, such as ISO 9001, demonstrate their commitment to consistent product quality and customer satisfaction. Certification to these systems indicates that the manufacturing process follows established protocols and best practices.

When selecting ball bearings, it’s important to consider the relevant standards and certifications that align with the application’s requirements. This ensures that the bearings meet recognized quality and performance criteria, ultimately contributing to reliable and efficient operation.

ball bearing

What are the Different Components that Make up a Typical Ball Bearing?

A typical ball bearing consists of several essential components that work together to reduce friction and support loads. Here are the main components that make up a ball bearing:

  • Outer Ring:

The outer ring is the stationary part of the bearing that provides support and houses the other components. It contains raceways (grooves) that guide the balls’ movement.

  • Inner Ring:

The inner ring is the rotating part of the bearing that attaches to the shaft. It also contains raceways that correspond to those on the outer ring, allowing the balls to roll smoothly.

  • Balls:

The spherical balls are the rolling elements that reduce friction between the inner and outer rings. Their smooth rolling motion enables efficient movement and load distribution.

  • Cage or Retainer:

The cage, also known as the retainer, maintains a consistent spacing between the balls. It prevents the balls from touching each other, reducing friction and preventing jamming.

  • Seals and Shields:

Many ball bearings include seals or shields to protect the internal components from contaminants and retain lubrication. Seals provide better protection against contaminants, while shields offer less resistance to rotation.

  • Lubricant:

Lubrication is essential to reduce friction, wear, and heat generation. Bearings are typically filled with lubricants that ensure smooth movement between the balls and raceways.

  • Flanges and Snap Rings:

In some designs, flanges or snap rings are added to help position and secure the bearing in its housing or on the shaft. Flanges prevent axial movement, while snap rings secure the bearing radially.

  • Raceways:

Raceways are the grooved tracks on the inner and outer rings where the balls roll. The shape and design of the raceways influence the bearing’s load-carrying capacity and performance.

  • Anti-Friction Shield:

In certain high-speed applications, a thin anti-friction shield can be placed between the inner and outer rings to minimize friction and heat generation.

These components work together to enable the smooth rolling motion, load support, and reduced friction that characterize ball bearings. The proper design and assembly of these components ensure the bearing’s optimal performance and longevity in various applications.

China wholesaler Thin-Walled Deep Groove Ball Bearing 6830 Zz/2RS 150*190*20mm for Mechanical Accessories bearing engineeringChina wholesaler Thin-Walled Deep Groove Ball Bearing 6830 Zz/2RS 150*190*20mm for Mechanical Accessories bearing engineering
editor by CX 2024-03-28

China Standard Factory Direct Sales Deep Groove Ball Bearings 6300 6301 6302 6303 6304 6305 6306 6307 6308 6309 6310 6311 6312 6313 6314 6315 Motorcycle Mechanical Bearing bearing distributors

Product Description

 

Product Description

 

Deep groove ball bearings are suitable for high-speed or even extremely high speed operation, and are very durable without frequent maintenance. This type of bearing has a low coefficient of friction, high limit speed, diverse size range and forms, and is widely used in industries such as precision instruments, low-noise motors, automobiles, motorcycles, and general machinery. It is the most widely used type of bearing in the mechanical industry. It mainly bears radial loads and can also withstand a certain amount of axial loads.

Detailed Photos

 

 

Product Parameters

 

 

Bearing Model Dimension Basic Load
rating (kN)		 Weight
(kg)
Standard
type		 shield seal With snap
ring groove		 With snap
ring		 d D B rsmin D2
(max)		 F max Cr Cor  
635 ZZ 2RZ 2RS N NR 5 19 6 0.3 – – 2.34 0.95 0.0080
636 ZZ 2RZ 2RS N NR 6 22 7 0.3 – –     0.0134
637 ZZ 2RZ 2RS N NR 7 – – – – –     –
638 ZZ 2RZ 2RS N NR 8 28 9 0.3 – –     0.5710
639 ZZ 2RZ 2RS N NR 9 – – – – –     –
6301 ZZ 2RZ 2RS N NR 12 37 12 1 41.3 1.12 9.70 4.20 0.060
6302 ZZ 2RZ 2RS N NR 15 42 13 1 46.3 1.12 11.4 5.40 0.082
6303 ZZ 2RZ 2RS N NR 17 47 14 1 52.7 1.12 13.5 6.55 0.115
6304 ZZ 2RZ 2RS N NR 20 52 15 1.1 57.9 1.12 15.9 7.80 0.141
6305 ZZ 2RZ 2RS N NR 25 62 17 1.1 67.7 1.7 22.5 11.6 0.219
6306 ZZ 2RZ 2RS N NR 30 72 19 1.1 78.6 1.7 28.1 16.0 0.350
6307 ZZ 2RZ 2RS N NR 35 80 21 1.5 86.6 1.7 33.2 19.0 0.454
6308 ZZ 2RZ 2RS N NR 40 90 23 1.5 96.5 2.46 31.4 22.4 0.639
6309 ZZ 2RZ 2RS N NR 45 100 25 1.5 106.5 2.46 52.7 31.5 0.836
6310 ZZ 2RZ 2RS N NR 50 110 27 2 116.6 2.46 61.8 38.0 1.05
6311 ZZ 2RZ 2RS N NR 55 120 29 2 129.7 2.82 71.5 45.0 1.35
6312 ZZ 2RZ 2RS N NR 60 130 31 2.1 139.7 2.82 81.9 52.0 1.70
6313 ZZ 2RZ 2RS N NR 65 140 33 2.1 149.7 2.82 92.3 60.0 2.10
6314 ZZ 2RZ 2RS N NR 70 150 35 2.1 159.7 2.82 104 68.0 2.50
6315 ZZ 2RZ 2RS N NR 75 160 37 2.1 169.7 2.82 114 76.5 3.00
6316 ZZ 2RZ 2RS N NR 80 170 39 2.1 182.9 3.1 124 86.5 3.60
6317 ZZ 2RZ 2RS N NR 85 180 41 3 192.9 3.1 133 96.5 4.25
6318 ZZ 2RZ 2RS N NR 90 190 43 3 202.9 3.1 143 108 4.90
6319 ZZ 2RZ 2RS N NR 95 200 45 3 212.9 3.1 153 119 5.75
6320 ZZ 2RZ 2RS N NR 100 215 47 3 227.8 3.1 174 140 7.00
6321 ZZ 2RZ 2RS N NR 105 225 49 3 237 3.5 182 153 8.25
6322 ZZ 2RZ 2RS N NR 110 240 50 3 252 3.5 205 178 9.54
6324 ZZ 2RZ 2RS – — 120 260 55 3 — – 228 207 12.2
6326 ZZ 2RZ 2RS – — 130 280 58 4 — – 229 216 18.0
6328 ZZ 2RZ 2RS – — 140 300 62 4 — – 251 245 22.0
6330 ZZ 2RZ 2RS – — 150 320 65 4 — – 274 284 22.7
6332 ZZ 2RZ 2RS – — 160 340 68 4 — – 278 287 26.2
6334 ZZ 2RZ 2RS – — 170 360 72 4 — – 325 355 36.6
6336 ZZ 2RZ 2RS – — 180 380 75 4 — – 355 405 43.1
6338 ZZ 2RZ 2RS – — 190 400 78 5 — – 355 415 49.7
6340 ZZ 2RZ 2RS – — 200 420 80 5 — – 380 445 55.3
6344 ZZ 2RZ 2RS – — 220 460 88 5 — – 410 520 73.9
6348 ZZ 2RZ 2RS – — 240 500 95 5 — – 470 625 94.4
6352 ZZ 2RZ 2RS – — 260 540 102 6 — – 505 710 118
6356 ZZ 2RZ 2RS – — 280 580 108 6 — – 570 840 144

 

 

Packaging & Shipping

 

Company Profile

 

ZheJiang Boy Bearing Manufacturing Co., Ltd., established in 2015, is a professional bearing company that integrates bearing research and development, manufacturing, and sales. The company’s main products include deep groove ball bearings, tapered roller bearings, outer ball surface seat bearings, cylindrical roller bearings, spherical roller bearings, thrust ball bearings, as well as various non-standard sizes and special materials of bearings. The company adheres to the business philosophy of quality first and service first, and its products are exported to dozens of countries such as Russia, Poland, India, Iran, South Africa, etc. The boy bearings will be of high-end quality and competitive prices. We sincerely hope to cooperate with you for a CZPT situation!

Our Advantages

1. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge.
2. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
3. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the
    customer’s requirements and needs.
4. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain. 

We Will Give The Factory Wholesale Price

 

 

 

production process

 

FAQ

Q:What’s your after-sales service and warranty?
A: We promise to bear the following responsibilities when defective products were found:
1. Replacements would be sent with goods of your next order;
2. Refund for defective products if customers require.

Q:Do you accept ODM&OEM orders?
A: Yes, we provide ODM&OEM services to worldwide customers, we also customize OEM box and packing as your requirements.

Q:What’s the MOQ?
A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.

Q:How long is the lead time?
A: The lead time for sample orders is 3-5 days, for bulk orders is 5-15 days.

Q:Do you offer free samples? 
A: Yes we offer free samples to distributors and wholesalers, however customers should bear freight. We DO NOT offer free samples to end users. 

Q:How to place order?
A: 1. Email us the model, brand and quantity,shipping way of bearings and we will quote our best price for you; 
2. Proforma Invoice made and sent to you as the price agreed by both parts; 
3. Deposit Payment after confirming the PI and we arrange production; 
4. Balance paid before shipment or after copy of Bill of Loading.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Price: Factory Wholesale Price
Material Quality: Bearing Steel
Number of Rows: Single-Row
Service: OEM ODM
Box: We Will Provide Corresponding Packing According to
Model No.: Main Product Deep Groove Ball Bearing
Samples:
US$ 10/Set
1 Set(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

ball bearing

Are there Specific Maintenance Practices to Ensure the Longevity of Ball Bearings?

Maintaining ball bearings is essential to ensure their longevity, reliable performance, and prevent premature failure. Proper maintenance practices can extend the lifespan of ball bearings and the equipment they are used in. Here are specific maintenance practices to consider:

  • Regular Lubrication:

Implement a regular lubrication schedule using the appropriate lubricant for the application. Lubrication reduces friction, prevents wear, and helps dissipate heat. Follow manufacturer guidelines for lubricant type, quantity, and frequency.

  • Clean Environment:

Keep the operating environment clean and free from contaminants. Dust, dirt, and debris can infiltrate bearings and cause damage. Use seals or shields to protect bearings from contaminants, especially in harsh environments.

  • Proper Installation:

Ensure correct installation of bearings using proper tools and techniques. Improper installation can lead to misalignment, uneven load distribution, and premature wear. Follow manufacturer recommendations for installation procedures.

  • Regular Inspections:

Perform routine visual inspections to check for signs of wear, damage, or contamination. Regular inspections can help identify issues early and prevent further damage. Pay attention to noise, vibration, and temperature changes.

  • Temperature Monitoring:

Monitor bearing temperatures during operation using infrared thermometers or sensors. Abnormal temperature increases can indicate inadequate lubrication, misalignment, or other problems.

  • Correct Handling:

Handle bearings with care to prevent damage during storage, transportation, and installation. Avoid dropping or subjecting them to impacts that can affect their internal components.

  • Bearing Removal and Replacement:

Follow proper procedures when removing and replacing bearings. Use appropriate tools and techniques to avoid damage to the bearing or the surrounding components.

  • Alignment Maintenance:

Maintain proper shaft and housing alignment to prevent excessive loads and wear on the bearing. Misalignment can lead to increased stress and premature failure.

  • Training and Education:

Provide training to operators and maintenance personnel on proper bearing maintenance and handling practices. Educated personnel are more likely to identify issues and perform maintenance correctly.

  • Documented Records:

Keep records of maintenance activities, inspections, lubrication schedules, and any issues encountered. This documentation helps track the bearing’s performance over time and informs future maintenance decisions.

By implementing these maintenance practices, you can ensure the longevity of ball bearings, minimize downtime, reduce operational costs, and maintain the reliability of the equipment they are a part of.

ball bearing

How do Temperature and Environmental Conditions Affect the Performance of Ball Bearings?

Temperature and environmental conditions have a significant impact on the performance and longevity of ball bearings. The operating environment can influence factors such as lubrication effectiveness, material properties, and overall bearing behavior. Here’s how temperature and environmental conditions affect ball bearing performance:

  • Lubrication:

Temperature variations can affect the viscosity and flow characteristics of lubricants. Extreme temperatures can cause lubricants to become too thin or too thick, leading to inadequate lubrication and increased friction. In high-temperature environments, lubricants can degrade, reducing their effectiveness.

  • Material Properties:

Temperature changes can alter the material properties of the bearing components. High temperatures can lead to thermal expansion, affecting bearing clearances and potentially causing interference between components. Extreme cold temperatures can make materials more brittle and prone to fracture.

  • Clearance Changes:

Temperature fluctuations can cause changes in the internal clearance of ball bearings. For instance, at high temperatures, materials expand, leading to increased clearance. This can affect bearing performance, load distribution, and overall stability.

  • Corrosion and Contamination:

Harsh environmental conditions, such as exposure to moisture, chemicals, or abrasive particles, can lead to corrosion and contamination of bearing components. Corrosion weakens the material, while contamination accelerates wear and reduces bearing life.

  • Thermal Stress:

Rapid temperature changes can result in thermal stress within the bearing components. Differential expansion and contraction between the inner and outer rings can lead to stress and distortion, affecting precision and bearing integrity.

  • Noise and Vibration:

Temperature-related changes in material properties and internal clearances can influence noise and vibration levels. Extreme temperatures can lead to increased noise generation and vibration, affecting the overall operation of machinery.

  • Lubricant Degradation:

Environmental factors like humidity, dust, and contaminants can lead to premature lubricant degradation. Oxidation, moisture absorption, and the presence of foreign particles can compromise the lubricant’s performance and contribute to increased friction and wear.

  • Seal Effectiveness:

Seals and shields that protect bearings from contaminants can be affected by temperature fluctuations. Extreme temperatures can lead to seal hardening, cracking, or deformation, compromising their effectiveness in preventing contamination.

  • Choosing Appropriate Bearings:

When selecting ball bearings for specific applications, engineers must consider the expected temperature and environmental conditions. High-temperature bearings, bearings with specialized coatings, and those with enhanced sealing mechanisms may be necessary to ensure reliable performance.

Overall, understanding the impact of temperature and environmental conditions on ball bearing performance is crucial for proper bearing selection, maintenance, and ensuring optimal operation in diverse industries and applications.

ball bearing

Can you Explain the Various Types of Ball Bearings and their Specific Use Cases?

Ball bearings come in various types, each designed to meet specific application requirements. Here’s an overview of the different types of ball bearings and their specific use cases:

  • Deep Groove Ball Bearings:

Deep groove ball bearings are the most common and versatile type. They have a deep raceway that allows them to handle both radial and axial loads. They are used in a wide range of applications, including electric motors, household appliances, automotive components, and industrial machinery.

  • Angular Contact Ball Bearings:

Angular contact ball bearings have a contact angle that enables them to handle both radial and axial loads at specific angles. They are suitable for applications where combined loads or thrust loads need to be supported, such as in machine tool spindles, pumps, and agricultural equipment.

  • Self-Aligning Ball Bearings:

Self-aligning ball bearings have two rows of balls and are designed to accommodate misalignment between the shaft and the housing. They are used in applications where shaft deflection or misalignment is common, such as conveyor systems, textile machinery, and paper mills.

  • Thrust Ball Bearings:

Thrust ball bearings are designed to support axial loads in one direction. They are commonly used in applications where axial loads need to be supported, such as in automotive transmissions, steering systems, and crane hooks.

  • Single-Row vs. Double-Row Bearings:

Single-row ball bearings have a single set of balls and are suitable for moderate load and speed applications. Double-row ball bearings have two sets of balls and offer higher load-carrying capacity. Double-row designs are used in applications such as machine tool spindles and printing presses.

  • Miniature and Instrument Ball Bearings:

Miniature ball bearings are smaller in size and are used in applications with limited space and lower load requirements. They are commonly used in small electric motors, medical devices, and precision instruments.

  • Max-Type and Conrad Bearings:

Max-type ball bearings have a larger number of balls to increase load-carrying capacity. Conrad bearings have fewer balls and are used in applications with moderate loads and speeds.

  • High-Precision Ball Bearings:

High-precision ball bearings are designed for applications where accuracy and precision are critical, such as machine tool spindles, aerospace components, and optical instruments.

  • High-Speed Ball Bearings:

High-speed ball bearings are engineered to minimize friction and accommodate rapid rotation. They are used in applications such as dental handpieces, turbochargers, and centrifuges.

In summary, the various types of ball bearings are tailored to different application requirements, including load type, direction, speed, and environmental conditions. Selecting the appropriate type of ball bearing ensures optimal performance and longevity in specific applications.

China Standard Factory Direct Sales Deep Groove Ball Bearings 6300 6301 6302 6303 6304 6305 6306 6307 6308 6309 6310 6311 6312 6313 6314 6315 Motorcycle Mechanical Bearing bearing distributorsChina Standard Factory Direct Sales Deep Groove Ball Bearings 6300 6301 6302 6303 6304 6305 6306 6307 6308 6309 6310 6311 6312 6313 6314 6315 Motorcycle Mechanical Bearing bearing distributors
editor by CX 2024-03-06

China supplier Factory Outlet Wholesale Price Various Types of Ball Bearings for Engines, Industrial Machinery, Agricultural Machinery, Mechanical Bearing Housings bearing assembly

Product Description

 

 

Warranty 12 Months
Delivery Time 7 Days If In Stock
Sample One Sample Accept, Sample Fee By Customer
Our Products Range Cylinder liner kit / Cylinder liner /Piston/Piston pin/Piston ring 
Crankshaft/Balance shaft/Camshaft 
Connecting rod assy/ Main Bearing shell/ Con rod Bearing 
Fuel injection pump/Fuel injector/Injector nozzle/Plunger
Cylinder head assy/ Head gasket 
Valve assy/ Engine valve/Valve guide 
Oil pump/Water pump assy 
Muffler& Filter/Air filter/Fuel filter/Oil filter 
Flywheel& Gear/Governor gear/Timing gear/Balance gear,etc

 

 

 

        

Contact Angle: Multiple Models
Aligning: Aligning Bearing
Separated: Separated
Rows Number: Multiple
Load Direction: Radial Bearing
Material: Bearing Steel
Customization:
Available

|

Customized Request

bearing

Types of Ball Bearings

In their most basic form, Ball Bearings have one common feature – they are made of steel. The majority of these bearings are made of 52100 steel, which has one percent chromium and one percent carbon. The steel can be hardened by heat trea
tment. 440C stainless steel is used for rusting problems. A cage around the ball balls is traditionally made from thin steel. However, some bearings use molded plastic cages to save money and friction.

Single-row designs

Steel linear translation stages often use single-row designs for ball bearings. These types of bearings provide smooth linear travel and can withstand high loads. The material steel has a high modulus of elasticity and a high stiffness, as well as a lower thermal expansion than aluminum. For these reasons, steel is the material of choice for a ball bearing in a typical user environment. Single-row designs for ball bearings are also suitable for applications in humid or corrosive environments.
Single-row designs for ball bearings are available in a variety of sizes and are axially adjustable. They have a high radial capacity, but require relatively little space. Single-row deep groove ball bearings with snap rings are STN 02 4605 or R47, respectively. Bearings with snap rings are identified by a suffix such as NR. They may not have seals or shields installed.
These single-row angular contact ball bearings are capable of supporting axial and radial loads. In a two-raceway arrangement, the radial load on bearing A causes a radial load to act on bearing B. Both axial and radial forces are transmitted between single-row angular contact ball bearings, and the resulting internal force must be taken into account to calculate equivalent dynamic bearing loads P.
Single-row deep groove ball bearings are the most common type of ball bearings. These bearings are designed with only one row of rolling elements. The single-row design is simple and durable, which makes it ideal for high-speed applications. Single-row designs for ball bearings are also available in various bore sizes. They can also come in a variety of shapes and are non-separable. If you need a high-speed bearing, you may want to opt for a double-row design.
In addition to single-row designs for ball bearings, you can choose ceramic or steel ball bearings. Ceramic balls are considerably harder than steel balls, but they are not as hard as steel. Hence, ceramic bearings are stiffer than steel ball bearings, resulting in increased stress on the outer race groove and lower load capacity. This is a great benefit for those who need the bearings to be lightweight and strong.
The difference between single-row and double-row designs is in the way that the inner and outer ring are installed. A single-row design places the inner ring in an eccentric position relative to the outer ring. The two rings are in contact at one point, which causes a large gap in the bearing. The balls are then inserted through the gap. As a result, the balls are evenly distributed throughout the bearing, which forces the inner and outer rings to become concentric.
Deep-groove ball bearings are one of the most popular types of ball bearings. They are available in different designs, including snap-ring, seal and shield arrangements. The race diameter of a deep-groove ball bearing is close to the ball’s diameter. These types of bearings are suited for heavy loads, and their axial and radial support are excellent. Their main drawback is that the contact angle cannot be adjusted to accommodate a wide range of relative loads.
bearing

Ceramic hybrid ball bearings

Hybrid ball bearings with ceramic balls have numerous advantages. They feature improved kinematic behavior and require less lubrication. Consequently, they can reduce operating costs. Additionally, their low thermal expansion coefficient allows for smaller changes in contact angle and preload variations, and they can retain tolerances. Furthermore, ceramic hybrid ball bearings have significantly increased life spans compared to conventional steel-steel ball bearings, with up to 10 times the lifespan.
Although ceramic bearings can be used in automotive applications, many people believe that they’re a poor choice for bicycle hubs. They don’t reduce weight and only work well in high-rpm environments. As a result, many cyclists don’t even bother with ceramic-based bearings. However, both Paul Lew and Alan are of the opinion that ceramic bearings are best suited for industrial or medical equipment applications. Furthermore, Paul and Alan believe that they are ideal for high-altitude drone motors.
Another advantage of ceramic hybrid ball bearings is that they use less friction than conventional steel-based balls. They are also more durable, requiring less lubrication than steel-based bearings. Furthermore, the lower friction and rolling resistance associated with ceramic-based ball bearings means that they can last ten times longer than steel-based bearings. A ceramic-based hybrid ball bearing can be used for applications where speed and lubrication are critical.
Ceramic hybrid ball bearings feature both steel and silicon nitride balls. Silicon nitride balls have 50% more modulus of elasticity than steel balls and can improve accuracy and precision. Ceramic balls also have a smoother surface finish than steel balls, which reduces vibration and spindle deflection. These benefits result in increased speed and improved production quality. In addition to this, ceramic balls can also reduce the operating temperature, enhancing the work environment.
Hybrid bearings are a popular alternative to steel bearings. They have some benefits over traditional steel bearings, and are becoming a popular choice for engineered applications. Hybrid bearings are ideal for high speed machines. The material used to manufacture ceramic balls is a high-quality alloy, and is comparatively inexpensive. But you must understand that lubrication is still necessary for hybrid bearings. If you are not careful, you may end up wasting money.
These ball bearings can be used in many industries and applications, and they are widely compatible with most metals. The main advantage of hybrid ball bearings is that they are very durable. While steel balls tend to corrode and wear out, ceramic ball bearings can withstand these conditions while minimizing maintenance and replacement costs. The benefits of hybrid ball bearings are clear. So, consider switching to these newer types of ball bearings.
bearing

Self-aligning ball bearings

Self-aligning ball bearings are a good choice for many applications. They are a great alternative to traditional ball bearings, and they are ideal for rotating applications in which the shaft must move in several directions. They are also ideal for use in rotating parts where a tight tolerance is necessary. You can choose between two types: plain and flex shaft. Read on to find out which one will suit your needs.
Self-aligning ball bearings are designed with a higher axial load carrying capacity than single-row radial deep groove ball bearings. The amount of axial load carrying capacity is dependent upon the pressure angle. These bearings have a hollow raceway in the outer ring that allows the inner ring to pivot without friction. They are often used for high-speed applications. Because of their design, they are highly accurate.
Self-aligning ball bearings are radial bearings that feature two rows of balls in a spherical outer ring. They also feature two deep uninterrupted raceway grooves in the inner ring. Their unique features make them an excellent choice for applications where shaft deflection is a significant factor. Despite their small size, they have a high level of precision and can withstand heavy loads.
Self-aligning ball bearings can compensate for misalignment in shaft applications. The inner ring and ball assembly are positioned inside an outer ring containing a curved raceway. This spherical design allows the balls and cage to deflect and re-align around the bearing center. These bearings are also ideal for applications where shaft deflection is significant, such as in simple woodworking machinery.
Another type of self-aligning ball bearing uses a common concave outer race. Both balls and outer races automatically compensate for angular misalignment caused by machining, assembly, and deflections. Compared to spherical rollers, they have lower frictional losses than their spherical counterparts. Self-alignment ball bearings also have lower vibration levels compared to other types of bearings.
Self-aligning ball bearings operate in misaligned applications because their spherical outer raceway can accommodate misalignment. This design allows them to work in applications where shaft deflection or housing deformation is common. They are therefore more suitable for low to medium-sized loads. The only real drawback to self-aligning ball bearings is their price. If you need to purchase a self-aligning ball bearing for your next project, you can expect to pay around $1500.

China supplier Factory Outlet Wholesale Price Various Types of Ball Bearings for Engines, Industrial Machinery, Agricultural Machinery, Mechanical Bearing Housings bearing assemblyChina supplier Factory Outlet Wholesale Price Various Types of Ball Bearings for Engines, Industrial Machinery, Agricultural Machinery, Mechanical Bearing Housings bearing assembly
editor by CX 2023-06-14