Tag Archives: groove bearing

China supplier High Performance Turbo Deep Groove Ball Bearing 6005 16005 RS with Good quality

Product Description

Product Description

Deep Groove Ball Bearings

Deep groove ball bearing
This is the most widely used ball bearing type. Trapped between the 2 races is a ring of balls that transmit the load and allows rotational motion between the 2 races. The balls are held in place by a retainer.

They have very low rolling friction and are optimized for low noise and low vibration. This makes them ideal for high-speed applications.

They are comparatively easy to install and require minimal maintenance. Care must be taken during installation to prevent denting of the races as they have to be push fit CZPT shafts.

Detailed Photos

 

  

Product Parameters

No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
603 3 0.1181  9 0.3543  3 0.1181  5 0.1181  0.2 0.008  486 223 0.0014 
604 4 0.1575  12 0.4724  4 0.1575  4 0.1575  0.2 0.008  960 350 0.571 
605 5 0.1969  14 0.5512  5 0.1969  5 0.1969  0.2 0.008  1070 420 0.0037 
606 6 0.2362  17 0.6693  6 0.2362  6 0.2362  0.3 0.012  1960 730 0.0069 
607 7 0.2756  19 0.7480  6 0.2362  6 0.2362  0.3 0.012  2800 1060 0.0082 
608 8 0.3150  22 0.8661  7 0.2756  7 0.2756  0.3 0.012  3290 1360 0.0129 
609 9 0.3543  24 0.9449  7 0.2756  7 0.2756  0.3 0.012  3330 1410 0.0160 
6000 10 0.3937  26 1.5716  8 0.3150  8 0.3150  0.3 0.012  4160 1780 0.0190 
6001 12 0.4724  28 1.1571  8 0.3150  8 0.3150  0.3 0.012  5110 2380 0.5710 
6002 15 0.5906  32 1.2598  9 0.3543  9 0.3543  0.3 0.012  5590 2840 0.0300 
6003 17 0.6693  35 1.3780  10 0.3937  10 0.3937  0.3 0.012  6000 3250 0.0390 
6004 20 0.7874  42 1.6535  12 0.4724  12 0.4724  0.6 0.571  9390 5571 0.0690 
6005 25 0.9843  47 1.8504  12 0.4724  12 0.4724  0.6 0.571  10060 5860 0.0800 
6006 30 1.1811  55 2.1654  13 0.5118  13 0.5118  1 0.039  11900 7460 0.1160 
6007 35 1.3780  62 2.4409  14 0.5512  14 0.5512  1 0.039  16210 10420 0.1150 
6008 40 1.5748  68 2.6677  15 0.5906  15 0.5906  1 0.039  17030 11700 0.1920 
6009 45 1.7717  75 2.9528  16 0.6299  16 0.6299  1 0.039  21080 14780 0.2450 
6571 50 1.9685  80 3.1496  16 0.6299  16 0.6299  1 0.039  22000 16260 0.2610 
60/22 22 0.8661  44 1.7323  12 0.4724  12 0.4724  0.6 0.571  9400 5050 0.0740 
60/28 28 1.1571  52 2.571  12 0.4724  12 0.4724  0.6 0.571  12500 7400 0.0980 
60/32 32 1.2598  58 2.2835  13 0.5118  13 0.5118  1 0.039  15100 9150 0.1290 

 

No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
623 3 0.1181  10 0.3937  4 0.1575  4 0.1575  0.15 0.006  640 220 0.0016 
624 4 0.1575  13 0.5118  5 0.1969  5 0.1969  0.2 0.008  1150 400 0.0032 
625 5 0.1969  16 0.6299  5 0.1969  5 0.1969  0.3 0.012  1880 680 0.0051 
626 6 0.2362  19 0.7480  6 0.2362  6 0.2362  0.3 0.012  2800 1060 0.  
627 7 0.2756  22 0.8661  7 0.2756  7 0.2756  0.3 0.012  3290 1360 0.0131 
628 8 0.3150  24 0.9449  8 0.3150  8 0.3150  0.3 0.012  3330 1410 0.0170 
629 9 0.3543  26 1.5716  8 0.3150  8 0.3150  0.3 0.012  4160 1780 0.0191 
6200 10 0.3937  30 1.1811  9 0.3543  9 0.3543  0.6 0.571  5110 2380 0.0320 
6201 12 0.4724  32 1.2598  10 0.3937  10 0.3937  0.6 0.571  6180 3060 0.571 
6202 15 0.5906  35 1.3780  11 0.4331  11 0.4331  0.6 0.571  7450 3700 0.0450 
6203 17 0.6693  40 1.5748  12 0.4724  12 0.4724  0.6 0.571  9560 4780 0.0650 
6204 20 0.7874  47 1.8504  14 0.5512  14 0.5512  1 0.039  12840 6650 0.1060 
6205 25 0.9843  52 2.571  15 0.5906  15 0.5906  1 0.039  14571 7930 0.1280 
6206 30 1.1811  62 2.4409  16 0.6299  16 0.6299  1 0.039  19460 11310 0.1990 
6207 35 1.3780  72 2.8346  17 0.6693  17 0.6693  1.1 0.043  25670 15300 0.2880 
6208 40 1.5748  80 3.1496  18 0.7087  18 0.7087  1.1 0.043  29520 18140 0.3660 

 

No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
633 3 0.1181  13 0.5118  5 0.1969  5 0.1969  0.2 0.008  1300 485 0.0034 
634 4 0.1575  16 0.6299  5 0.1969  5 0.1969  0.3 0.012  1880 680 0.0054 
635 5 0.1969  19 0.7480  6 0.2362  6 0.2362  0.3 0.012  2810 1060 0.0089 
636 6 0.2362  22 0.8661  7 0.2756  7 0.2756  0.3 0.012  3290 1360 0.0145 
637 7 0.2756  26 1.5716  9 0.3543  9 0.3543  0.3 0.012  3340 1410 0.5718 
638 8 0.3150  28 1.1571  9 0.3543  9 0.3543  0.3 0.012  4160 1780 0.0303 
639 9 0.3543  30 1.1811  10 0.3937  10 0.3937  0.6 0.571  5120 2390 0.571 
6300 10 0.3937  35 1.3780  11 0.4331  11 0.4331  0.6 0.571  7640 3470 0.571 
6301 12 0.4724  37 1.4567  12 0.4724  12 0.4724  1 0.039  9700 4190 0.0600 
6302 15 0.5906  42 1.6535  13 0.5118  13 0.5118  1 0.039  11400 5430 0.0820 
6303 17 0.6693  47 1.8504  14 0.5512  14 0.5512  1 0.039  13580 6580 0.1150 
6304 20 0.7874  52 2.0742  15 0.5906  15 0.5906  1.1 0.043  15940 7880 0.1490 
6305 25 0.9843  62 2.4409  17 0.6693  17 0.6693  1.1 0.043  22380 11490 0.2320 
6306 30 1.1811  72 2.8346  19 0.7480  19 0.7480  1.1 0.043  27000 15200 0.3490 
63/22 22 0.8661  56 2.2047  16 0.6299  16 0.6299  1.1 0.043  18400 9250 0.1760 
63/28 28 1.1571  68 2.6772  18 0.7087  18 0.7087  1.1 0.043  26800 14000 0.2870 
63/32 32 1.2598  75 2.9528  20 0.7874  20 0.7874  1.1 0.043  30000 16200 0.3820 

 

No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
683 3 0.1181  7 0.2756  2 0.0787  3 0.1181  0.1 0.004  420 135 0.571 
684 4 0.1575  9 0.3543  2.5 0.0984  4 0.1575  0.1 0.004  480 170 0.571 
685 5 0.1969  11 0.4331  3 0.1181  5 0.1969  0.15 0.006  770 320 0.0019 
686 6 0.2362  13 0.5118  3.5 0.1378  5 0.1969  0.15 0.006  1080 440 0.0571 
687 7 0.2756  14 0.5512  3.5 0.1378  5 0.1969  0.15 0.006  1170 510 0.0030 
688 8 0.3150  16 0.6299  4 0.1575  5 0.1969  0.2 0.008  1250 590 0.0038 
689 9 0.3543  17 0.6693  4 0.1575  5 0.1969  0.2 0.008  1330 660 0.0440 
6800 10 0.3937  19 0.7480  5 0.1969  5 0.1969  0.3 0.012  1590 750 0.0050 
6801 12 0.4724  21 0.8268  5 0.1969  5 0.1969  0.3 0.012  1910 1040 0.0060 
6802 15 0.5906  24 0.9449  5 0.1969  5 0.1969  0.3 0.012  2070 1250 0.0070 
6803 17 0.6693  26 1.5716  5 0.1969  5 0.1969  0.3 0.012  2130 1360 0.0080 
6804 20 0.7874  32 1.2598  7 0.2756  7 0.2756  0.3 0.012  3480 2230 0.0190 
6805 25 0.9843  37 1.4567  7 0.2756  7 0.2756  0.3 0.012  3680 2630 0.5710 
6806 30 1.1811  42 1.6535  7 0.2756  7 0.2756  0.3 0.012  4000 3150 0.0260 
6807 35 1.3780  47 1.8504  7 0.2756  7 0.2756  0.3 0.012  4270 3600 0.5710 
6808 40 1.5748  52 2.571  7 0.2756  7 0.2756  0.3 0.012  4410 3890 0.0330 
6809 45 1.7717  58 2.2835  7 0.2756  7 0.2756  0.3 0.012  4590 4330 0.0400 
6810 50 1.9685  65 2.5591  7 0.2756  7 0.2756  0.3 0.012  6610 6080 0.0520 
6811 55 2.1654  72 2.3846  9 0.3543  9 0.3543  0.3 0.012  8530 8080 0. 0571  
6812 60 2.3622  78 3.0709  10 0.3937  10 0.3937  0.3 0.012  9200 8760 0.1060 
6813 65 2.5591  85 3.3465  10 0.3937  10 0.3937  0.6 0.571  1571 9420 0.1250 
6814 70 2.7559  90 3.5433  10 0.3937  10 0.3937  0.6 0.571  1571 10090 0.1350 
6815 75 2.9528  95 3.7402  10 0.3937  10 0.3937  0.6 0.571  11230 1571 0.1450 
6816 80 3.1496  100 3.9370  10 0.3937  10 0.3937  0.6 0.571  11320 11080 0.1550 
6817 85 3.3465  110 4.3307  13 0.5118  13 0.5118  1 0.039  17599 18300 0.2650 
6818 90 3.5433  115 4.5276  13 0.5118  13 0.5118  1 0.039  17853 18961 0.2800 

 

No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
6819 95 3.7402  120 4.7244  13 0.5118  13 0.5118  1 0.0390  18089 19616 0.2980 
6820 100 3.9370  125 4.9213  13 0.5118  13 0.5118  1 0.0390  18340 20266 0.3110 
6821 105 4.1339  130 5.1181  13 0.5118  13 0.5118  1 0.0390  18912 20924 0.3250 
6822 110 4.3307  140 5.5118  16 0.6299  16 0.6299  1 0.0390  28100 30700 0.5100 
6824 120 4.7244  150 5.9055  16 0.6299  16 0.6299  1 0.0390  28900 32900 0.5490 
6826 130 5.1181  165 6.4961  18 0.7087  18 0.7087  1.1 0.0430  37900 42900 0.7900 
6828 140 5.1181  175 6.8898  18 0.7087  18 0.7087  1 0. 0571   38200 44300 0.9900 
6830 150 5.9055  190 7.4803  20 0.7874  20 0.7874  1 0. 0571   49100 57100 1.5000 
6832 160 6.2992  200 7.8740  20 0.7874  20 0.7874  1 0. 0571   49600 59100 1.7000 
6834 170 6.6929  215 8.4646  22 0.8661  22 0.8661  1 0. 0571   61500 73300 1.9000 
6836 180 7.0866  225 8.8582  22 0.8661  22 0.8661  1 0. 0571   62300 75900 2.0000 
6838 190 7.4803  240 9.4480  24 0.9449  24 0.9449  1.5 0.0590  75100 91600 2.1000 
6840 200 7.8740  250 9.8425  24 0.9449  24 0.9449  1.5 0.0590  74200 91200 2.3800 
6844 220 8.6614  270 10.6299  24 0.9499  – – 1.5 0.0590  76400 97800 2.7900 
6848 240 9.4488  300 11.8110  28 1.1571  – – 2 0.0787  83500 108000 4.5000 
6852 260 10.2362  320 12.5984  28 1.1571  – – 2 0.0787  95000 128000 4.8500 
6856 280 11.5716  350 13.7795  33 1.2992  – – 2 0.0787  135000 178000 7.6000 
6860 300 11.8110  380 14.9606  38 1.4960  – – 2 0.0787  162000 222000 11.0000 
6864 320 12.5984  400 15.7480  38 1.4960  – – 2 0.0787  168000 235000 12.0000 
6872 360 14.1732  440 17.3228  38 1.4960  – – 2.5 0.0984  – – 12.2000 
6876 380 14.9606  480 18.8976  46 1.8110  – – 2.5 0.0984  168000 235000 20.5000 
6880 400 15.7480  500 19.6850  46 1.8110  – – 2.5 0.0984  – – 21.7000 
6884 420 16.5354  520 20.4724  46 1.8110  – – 2.5 0.1377  251000 425000 22.0000 
6888 440 17.3228  540 21.2598  46 1.8110  – – 2.5 0.0984  – – 24.0000 
6892 460 18.1102  580 22.8346  56 2.2047  – – 3 0.1181  – – 33.5000 

 

No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
693 3 0.1181  8 0.3150  3 0.1181  4 0.1575  0.15 0.006  430 170 0.0008 
694 4 0.1575  11 0.4331  4 0.1575  4 0.1575  0.15 0.006  960 350 0.0017 
695 5 0.1969  13 0.5118  4 0.1575  4 0.1575  0.2 0.008  1070 420 0.571 
696 6 0.2362  15 0.5906  5 0.1969  5 0.1969  0.2 0.008  1470 600 0.0036 
697 7 0.2756  17 0.6693  5 0.1969  5 0.1969  0.3 0.012  1600 710 0.0050 
698 8 0.3150  19 0.7480  6 0.2362  6 0.2362  0.3 0.012  2230 910 0.0076 
699 9 0.3543  20 0.7874  6 0.2362  6 0.2362  0.3 0.012  2480 1090 0.0085 
6900 10 0.3937  22 0.8661  6 0.2362  6 0.2362  0.3 0.012  2690 1270 0.5710 
6901 12 0.4724  24 0.9449  6 0.2362  6 0.2362  0.3 0.012  2890 1460 0.0120 
6902 15 0.5906  28 1.1571  7 0.2756  7 0.2756  0.3 0.012  4320 2250 0.0180 
6903 17 0.6693  30 1.1811  7 0.2756  7 0.2756  0.3 0.012  4590 2550 0.0190 
6904 20 0.7874  37 1.4567  9 0.3543  9 0.3543  0.3 0.012  6370 3680 0.0380 
6905 25 0.9843  42 1.6535  9 0.3543  9 0.3543  0.3 0.012  6660 4180 0.0440 
6906 30 1.1811  47 1.8504  9 0.3543  9 0.3543  0.3 0.012  7240 5571 0.0500 
6907 35 1.3780  55 2.1654  10 0.3543  10 0.3937  0.6 0.571  10390 7160 0.7500 
6908 40 1.5748  62 2.4409  12 0.3937  12 0.4724  0.6 0.571  13571 9200 0.1180 
6909 45 1.7717  68 2.6772  12 0.4724  12 0.4724  0.6 0.571  13490 10130 0.1280 
6910 50 1.9685  72 2.8346  12 0.4724  12 0.4724  0.6 0.571  13900 1571 0.1330 
6911 55 2.1654  80 3.1496  13 0.4724  13 0.5118  1 0.039  14820 12690 0.1770 
6912 60 2.3622  85 3.3465  13 0.5118  13 0.5118  1 0.039  15080 13480 0.1910 
6913 65 2.5591  90 3.5433  13 0.5118  13 0.5118  1 0.039  19950 17490 0.2000 
6914 70 2.7559  100 3.9370  16 0.6299  16 0.6299  1 0.039  25950 21850 0.3270 
6915 75 2.9528  105 4.1339  16 0.6299  16 0.6299  1 0.039  26780 23560 0.3450 
6916 80 3.1496  110 4.3307  16 0.6299  16 0.6299  1 0.039  27590 25280  0.3630 
6917 85 3.3465  120 4.7244  18 0.7087  18 0.7087 1.1 0.043  31900 29700 0.5170 

 

Product Applications

 

Company Profile

 

ZheJiang Jieyi Bearing Co., Ltd. is a more than 10-year history of bearing trading company. We are located in the biggest bearing town in China–Yiandian Town.

Our products include: Deep Groove Ball Bearings, Self-aligning Ball Bearings, Spherical Bearings, Tapered Roller Bearings, Cylindrical Roller Bearings, Needle Roller Bearings, Self-aligning Roller Bearings, Angular Contact Ball Bearings, Thrust Ball Bearings, Trust Roller Bearings and Special Bearings.

Jieyi Bearing has advanced quality testing and inspecting equipment, to guarantee product quality meets customers’ demand. Annually our company′ S export over 10 million dollars.

To service dear customers at the fastest speed, we built a great Warehouse to stock bearings, so as to ship your required bearings fast. Inside of the bearing warehouse, there is all sourcing of bearing stock, with all kinds of bearings, over 10000 types.

Jieyi Bearing also provides OEM service, such as bearing quality, noise level, grease brand, packing method, etc. We have enough OEM experience, and have a complete OEM manual for customer reference.

Products have been selling well in the American, French, Spanish, Austria, Italian, the U. A. E. Saudi, Pakistan, India, and Brizal markets.

With over 10 years′ Experience in bearings market, Jieyi Bearing have built up good relationship with all of our customers and quality factory. We always get satisfactory feedback from our customers because of the high quality products and good OEM service. We always supply the quality, stable, economical bearings and proper technical services.

Welcome to people of various enterprises with advance!

 

OEM Service

Jieyi Bearing also provides OEM service, such as bearing quality, noise level, grease brand, packing method, etc. We have enough OEM experience, and have a complete OEM manual for customer reference.
 

 

Our Advantages

WHY CHOOSE US?

 

1. BETTER COMMUNICATION

JVZB Bearing understands customer service more so than factories, we focus entirely on the customer so it is often easier to communicate with you.
 

2. FAVORABLE PRICING

JVZB Beaing often uses factories that are not big enough to have their own international sales team or export license. This means: we can work with factories that have lower prices than some easy-to-find competitors online.
 

3. LOW MOQ

We have great relationships with factories or have product stock on hand, CZPT to offer lower order quantities for the small sized importer.
 

4. SUPPLIER VERIFICATION

JVZB Bearing have more than 10 years of long-standing relationships with the factories, so we are aware of the capabilities of each. If you need, we can visit the factory to carry out product inspections and check up on an order.  
 

5. QC CONTROL

JVZB Bearing have our own quality inspection laboratory with advanced testing equipment, we are CZPT to reasonably ensure the quality of the finished products.
 

6. MULTIPLE VARIETY PURCHASE

In fact, bearing factories usually only produce 1 type of bearing, or even focus on producing several models.  If you want multiple items sourced for 1 product,  we can help. This is a great way to source more products and do so quickly and efficiently.
 

7. OEM or OEM SERVICE

If you need special package or special labeling, we are glad to support OEM or OEM service.

 

Product List

Deeo Groove Ball Bearing

 

Spherical Roller Bearing

 

Taper Roller Bearing

 

Needle Roller Bearing

 

Pillow Block Bearing

 

Ceramic Bearing

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Types: Deep Groove Ball Bearing
Clearance: C1 C2 C3 C5
Percision: P0 P6 P5 P4
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.





about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

ball bearing

Can you Provide Examples of Industries where Ball Bearings are Crucial Components?

Ball bearings are essential components in a wide range of industries where smooth motion, load support, and precision are vital. Here are some examples of industries where ball bearings play a crucial role:

  • Automotive Industry:

Ball bearings are used in various automotive applications, including wheel hubs, transmissions, engines, steering systems, and suspension components. They provide reliable rotation and support in both passenger vehicles and commercial vehicles.

  • Aerospace Industry:

In the aerospace sector, ball bearings are found in aircraft engines, landing gear systems, control surfaces, and avionics equipment. Their ability to handle high speeds and precision is vital for aviation safety.

  • Industrial Machinery:

Ball bearings are integral to a wide range of industrial machinery, including pumps, compressors, conveyors, machine tools, printing presses, and textile machinery. They facilitate smooth operation and load distribution in these diverse applications.

  • Medical Equipment:

In medical devices and equipment, ball bearings are used in surgical instruments, imaging equipment, dental tools, and laboratory machinery. Their precision and smooth movement are crucial for accurate diagnostics and treatments.

  • Robotics and Automation:

Ball bearings are key components in robotic arms, automation systems, and manufacturing machinery. They enable precise movement, high-speed operation, and reliable performance in automated processes.

  • Renewable Energy:

Wind turbines and solar tracking systems utilize ball bearings to enable efficient rotation and tracking of the wind blades and solar panels. Ball bearings withstand the dynamic loads and environmental conditions in renewable energy applications.

  • Marine and Shipbuilding:

Ball bearings are used in marine applications such as ship propulsion systems, steering mechanisms, and marine pumps. They withstand the corrosive environment and provide reliable performance in maritime operations.

  • Heavy Equipment and Construction:

In construction machinery like excavators, bulldozers, and cranes, ball bearings support the movement of heavy loads and enable efficient operation in demanding environments.

  • Electronics and Consumer Appliances:

Consumer electronics like electric motors, computer hard drives, and household appliances rely on ball bearings for smooth motion and reliable operation.

  • Oil and Gas Industry:

In oil and gas exploration and extraction equipment, ball bearings are used in drilling rigs, pumps, and processing machinery. They handle the high loads and harsh conditions of this industry.

These examples demonstrate how ball bearings are indispensable components in various industries, contributing to the efficiency, reliability, and functionality of diverse mechanical systems and equipment.

ball bearing

How do Temperature and Environmental Conditions Affect the Performance of Ball Bearings?

Temperature and environmental conditions have a significant impact on the performance and longevity of ball bearings. The operating environment can influence factors such as lubrication effectiveness, material properties, and overall bearing behavior. Here’s how temperature and environmental conditions affect ball bearing performance:

  • Lubrication:

Temperature variations can affect the viscosity and flow characteristics of lubricants. Extreme temperatures can cause lubricants to become too thin or too thick, leading to inadequate lubrication and increased friction. In high-temperature environments, lubricants can degrade, reducing their effectiveness.

  • Material Properties:

Temperature changes can alter the material properties of the bearing components. High temperatures can lead to thermal expansion, affecting bearing clearances and potentially causing interference between components. Extreme cold temperatures can make materials more brittle and prone to fracture.

  • Clearance Changes:

Temperature fluctuations can cause changes in the internal clearance of ball bearings. For instance, at high temperatures, materials expand, leading to increased clearance. This can affect bearing performance, load distribution, and overall stability.

  • Corrosion and Contamination:

Harsh environmental conditions, such as exposure to moisture, chemicals, or abrasive particles, can lead to corrosion and contamination of bearing components. Corrosion weakens the material, while contamination accelerates wear and reduces bearing life.

  • Thermal Stress:

Rapid temperature changes can result in thermal stress within the bearing components. Differential expansion and contraction between the inner and outer rings can lead to stress and distortion, affecting precision and bearing integrity.

  • Noise and Vibration:

Temperature-related changes in material properties and internal clearances can influence noise and vibration levels. Extreme temperatures can lead to increased noise generation and vibration, affecting the overall operation of machinery.

  • Lubricant Degradation:

Environmental factors like humidity, dust, and contaminants can lead to premature lubricant degradation. Oxidation, moisture absorption, and the presence of foreign particles can compromise the lubricant’s performance and contribute to increased friction and wear.

  • Seal Effectiveness:

Seals and shields that protect bearings from contaminants can be affected by temperature fluctuations. Extreme temperatures can lead to seal hardening, cracking, or deformation, compromising their effectiveness in preventing contamination.

  • Choosing Appropriate Bearings:

When selecting ball bearings for specific applications, engineers must consider the expected temperature and environmental conditions. High-temperature bearings, bearings with specialized coatings, and those with enhanced sealing mechanisms may be necessary to ensure reliable performance.

Overall, understanding the impact of temperature and environmental conditions on ball bearing performance is crucial for proper bearing selection, maintenance, and ensuring optimal operation in diverse industries and applications.

ball bearing

What are the Primary Benefits of Using Ball Bearings in Machinery and Equipment?

Ball bearings offer several primary benefits when used in machinery and equipment. Their design and functionality provide advantages that contribute to the efficient and reliable operation of various applications. Here are the key benefits:

  • Reduced Friction:

One of the primary benefits of ball bearings is their ability to minimize friction between moving parts. The rolling motion of the balls reduces the contact area and sliding friction, leading to smoother operation and less energy loss due to frictional heating.

  • Efficient Load Support:

Ball bearings are engineered to support both radial and axial loads, making them versatile for applications with multidirectional forces. This load-bearing capability allows machinery to handle different types of loads while maintaining performance and stability.

  • Smooth Rotation:

Ball bearings enable smooth and precise rotational movement. The rolling motion of the balls provides consistent motion with minimal resistance, ensuring that machinery operates smoothly and without jerks.

  • High-Speed Capability:

Due to their low friction and efficient rolling action, ball bearings are suitable for high-speed applications. They allow machinery and equipment to achieve and maintain high rotational speeds without excessive wear or heat buildup.

  • Reduced Wear and Maintenance:

The reduced friction in ball bearings leads to lower wear on components. This results in longer service intervals and reduced maintenance requirements, saving both time and maintenance costs.

  • Energy Efficiency:

By minimizing friction and reducing energy losses, ball bearings contribute to the overall energy efficiency of machinery. This is particularly important in applications where energy consumption is a concern.

  • Versatility:

Ball bearings come in various types, sizes, and configurations, allowing them to be used in a wide range of machinery and equipment. They can be customized to suit specific application requirements.

  • Reliability and Longevity:

Ball bearings are designed to withstand heavy loads and harsh operating conditions. Their durability and resistance to wear ensure reliable performance and an extended operational life.

  • Quiet Operation:

Ball bearings contribute to quiet machinery operation due to the smooth rolling motion of the balls. This is particularly important in applications where noise reduction is a consideration.

In summary, the primary benefits of using ball bearings in machinery and equipment include reduced friction, efficient load support, smooth rotation, high-speed capability, reduced wear and maintenance, energy efficiency, versatility, reliability, and quiet operation. These benefits collectively enhance the performance and longevity of machinery across various industries.

China supplier High Performance Turbo Deep Groove Ball Bearing 6005 16005 RS with Good qualityChina supplier High Performance Turbo Deep Groove Ball Bearing 6005 16005 RS with Good quality
editor by CX 2024-02-09

China Best Sales Bearing Rolamentos 6303-2RS High Precision Double Sealed Deep Groove Ball Bearing with Chrome Steel connecting rod bearing

Product Description

Bearing 6303-2RS High Precision Double Sealed Deep Groove Ball Bearing

Bearing parameters:
 

CHROME STEEL*     Dimensions in mm unless otherwise specified
 
Bore O.D. Width Open Bearing Shielded Bearing Sealed Bearing Basic Load Ratings
      KN
HNS HNS HNS dynamic static
Reference Reference Reference C Co
20 42 12 6004 6004ZZ 6004-2RS 7.22 4.46
47 14 6204 6204ZZ 6204-2RS 12.7 6.5
52 15 6304 6304ZZ 6304-2RS 15.9 7.8
25 47 12 6005 6005ZZ 6005-2RS 10.1 5.85
52 15 6205 6205ZZ 6205-2RS 14 7.8
62 17 6305 6305ZZ 6305-2RS 22.5 11.6
80 21 6405 6405ZZ 6405-2RS 36.1 19.4
30 55 13 6006 6006ZZ 6006-2RS 10.2 6.91
62 16 6206 6206ZZ 6206-2RS 19.5 11.2
72 19 6306 6306ZZ 6306-2RS 28.1 16
90 23 6406 6406ZZ 6406-2RS 43.4 23.9
35 62 14 6007 6007ZZ 6007-2RS 16 10.3
72 17 6207 6207ZZ 6207-2RS 25.5 15.3
80 21 6307 6307ZZ 6307-2RS 33.2 19
100 25 6407 6407ZZ 6407-2RS 55 31
40 68 15 6008 6008ZZ 6008-2RS 13 11.5
80 18 6208 6208ZZ 6208-2RS 29.8 18
90 23 6308 6308ZZ 6308-2RS 39.8 23.3
110 27 6408 6408ZZ 6408-2RS 65.5 37.5
45 75 16 6009 6009ZZ 6009-2RS 21 14.9
85 19 6209 6209ZZ 6209-2RS 32.2 21
100 25 6309 6309ZZ 6309-2RS 51.1 30.5
120 29 6409 6409ZZ 6409-2RS 77.5 45.5
50 80 16 6571 6571ZZ 6571-2RS 22 16.2
90 20 6210 6210ZZ 6210-2RS 34 22.5
110 27 6310 6310ZZ 6310-2RS 59.9 36.9
130 31 6410 6410ZZ 6410-2RS 92.2 55.2
55 90 18 6011 6011ZZ 6011-2RS 30.4 22
100 21 6211 6211ZZ 6211-2RS 43.3 28.1
120 29 6311 6311ZZ 6311-2RS 71.5 44.6
140 33 6411 6411ZZ 6411-2RS 100 62.5
60 95 18 6012 6012ZZ 6012-2RS 30.7 22.7
110 22 6212 6212ZZ 6212-2RS 46.1 31.5
130 31 6312 6312ZZ 6312-2RS 79.4 50.4
150 35 6412 6412ZZ 6412-2RS 109 70
65 100 18 6013 6013ZZ 6013-2RS 32.1 24.9
120 23 6213 6213ZZ 6213-2RS 54.2 39.3
140 33 6313 6313ZZ 6313-2RS 89.5 59.7
160 37 6413 6413ZZ 6413-2RS 118 78.5
70 110 20 6014 6014ZZ 6014-2RS 38.6 30.6
125 24 6214 6214ZZ 6214-2RS 58.9 43.6
150 35 6314 6314ZZ 6314-2RS 101 66
180 42 6414 6414ZZ 6414-2RS 140 99.5
75 115 20 6015 6015ZZ 6015-2RS 31 33.1
130 25 6215 6215ZZ 6215-2RS 64.3 47.5
160 37 6315 6315ZZ 6315-2RS 111 74.2
190 45 6415 6415ZZ 6415-2RS 154 115
80 125 22 6016 6016ZZ 6016-2RS 47.5 39.8
140 26 6216 6216ZZ 6216-2RS 68.1 53.3
170 39 6316 6316ZZ 6316-2RS 120 83.9
200 48 6416 6416ZZ 6416-2RS 163 125
85 130 22 6017 6017ZZ 6017-2RS 50.8 42.8
150 28 6217 6217ZZ 6217-2RS 83.2 64
180 41 6317 6317ZZ 6317-2RS 132 96.5
210 52 6417 6417ZZ 6417-2RS 175 138
90 140 24 6018 6018ZZ 6018-2RS 58 49.8
160 30 6218 6218ZZ 6218-2RS 92.7 71.3
190 43 6318 6318ZZ 6318-2RS 145 108
225 54 6418 6418ZZ 6418-2RS 192 158
95 145 24 6019 6019ZZ 6019-2RS 57.8 50
170 32 6219 6219ZZ 6219-2RS 105 79.1
200 45 6319 6319ZZ 6319-2RS 157 122
100 150 24 6571 6571ZZ 6571-2RS 64.5 56.2
180 34 6220 6220ZZ 6220-2RS 118 88.4
215 47 6320 6320ZZ 6320-2RS 173 140
105 160 26 6571 6571ZZ 6571-2RS 71.8 63.2
190 36 6221 6221ZZ 6221-2RS 126 98.8
225 49 6321 6321ZZ 6321-2RS 173 145
110 170 28 6571 6571ZZ 6571-2RS 81.9 72.9
200 38 6222 6222ZZ 6222-2RS 136 112
240 50 6322 6322ZZ 6322-2RS 193 171
120 180 28 6571 6571ZZ 6571-2RS 88.7 79.7
215 40 6224 6224ZZ 6224-2RS 139 112
260 55 6324 6324ZZ 6324-2RS 217 196
130 200 33 6026 6026ZZ 6026-2RS 105 96.8
230 40 6226 6226ZZ 6226-2RS 148 125
280 58 6326 6326ZZ 6326-2RS 218 205
140 210 33 6571 6571ZZ 6571-2RS 116 108
250 42 6228 6228ZZ 6228-2RS 179 167
300 62 6328 6328ZZ 6328-2RS 275 272
150 225 35 6030 6030ZZ 6030-2RS 132 125
270 45 6230 6230ZZ 6230-2RS 190 183
160 240 38 6032 6032ZZ 6032-2RS 145 138
290 48 6232 6232ZZ 6232-2RS 215 218

About Deep Groove Ball Cearing

  • 6000 Series – Extra Light Ball Bearings – Ideal for limited space applications
  • 6200 Series – Light Series Ball Bearings – Balanced between space and load capacity
  • 6300 Series – Medium Series Ball Bearings – Ideal for heavier load capacity applications

Deep groove ball bearing component:

Rich bearings in stock:


Application


Package:
A. Plastic paper + kraft paper + outer carton + Nylon bag
B. Tube package + outer carton + Nylon bag
C. Single box + outer carton + pallets
D. According to your requirement

For more information, contact us directly pls.
  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Aligning: Non-Aligning Bearing
Separated: Unseparated
Rows Number: Single
Samples:
US$ 0.1/Piece
1 Piece(Min.Order)

|

Order Sample
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.





about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

ball bearing

What are the Challenges Associated with Noise Reduction in Ball Bearings?

Noise reduction in ball bearings is a crucial consideration, especially in applications where noise levels must be minimized for operational efficiency and user comfort. While ball bearings are designed to operate smoothly, there are several challenges associated with reducing noise in their operation:

  • Vibration:

Vibration generated by the movement of rolling elements and raceways can lead to noise. Even minor irregularities in bearing components or the mounting system can cause vibration that translates into audible noise.

  • Bearing Type and Design:

The type and design of the ball bearing can impact noise generation. For example, deep groove ball bearings are known for their quiet operation, while angular contact bearings can generate more noise due to their higher contact angles.

  • Lubrication:

Improper or inadequate lubrication can result in increased friction and wear, leading to noise. Choosing the right lubricant and maintaining proper lubrication levels are essential for reducing noise in ball bearings.

  • Bearing Clearance and Preload:

Incorrect clearance or preload settings can lead to noise issues. Excessive clearance or inadequate preload can cause the rolling elements to impact the raceways, resulting in noise during rotation.

  • Material and Manufacturing Quality:

The quality of materials and manufacturing processes can affect noise levels. Inconsistent or low-quality materials, improper heat treatment, or manufacturing defects can lead to noise generation during operation.

  • Surface Finish:

The surface finish of the rolling elements and raceways can impact noise. Rough surfaces can generate more noise due to increased friction and potential irregularities.

  • Sealing and Shielding:

Seals and shields that protect bearings can influence noise levels. While they are necessary for contamination prevention, they can also cause additional friction and generate noise.

  • Operating Conditions:

External factors such as temperature, speed, and load can influence noise levels. High speeds or heavy loads can amplify noise due to increased stress on the bearing components.

  • Wear and Deterioration:

As ball bearings wear over time, noise levels can increase. Worn components or inadequate lubrication can lead to more significant noise issues as the bearing operates.

To address these challenges and reduce noise in ball bearings, manufacturers and engineers employ various techniques, such as optimizing design, selecting suitable bearing types, using proper lubrication, maintaining accurate preload settings, and ensuring high-quality materials and manufacturing processes. Noise reduction efforts are essential to improve overall product quality, meet noise regulations, and enhance user experience in various applications.

ball bearing

How do Ceramic Ball Bearings Compare to Traditional Steel Ball Bearings in Terms of Performance?

Ceramic ball bearings and traditional steel ball bearings have distinct characteristics that can impact their performance in various applications. Here’s a comparison of how these two types of bearings differ in terms of performance:

  • Material Composition:

Ceramic Ball Bearings:

Ceramic ball bearings use ceramic rolling elements, typically made from materials like silicon nitride (Si3N4) or zirconium dioxide (ZrO2). These ceramics are known for their high hardness, low density, and resistance to corrosion and wear.

Traditional Steel Ball Bearings:

Traditional steel ball bearings use steel rolling elements. The type of steel used can vary, but common materials include chrome steel (52100) and stainless steel (440C). Steel bearings are known for their durability and strength.

  • Friction and Heat:

Ceramic Ball Bearings:

Ceramic bearings have lower friction coefficients compared to steel bearings. This results in reduced heat generation during operation, contributing to higher efficiency and potential energy savings.

Traditional Steel Ball Bearings:

Steel bearings can generate more heat due to higher friction coefficients. This can lead to increased energy consumption in applications where efficiency is crucial.

  • Weight:

Ceramic Ball Bearings:

Ceramic bearings are lighter than steel bearings due to the lower density of ceramics. This weight reduction can be advantageous in applications where minimizing weight is important.

Traditional Steel Ball Bearings:

Steel bearings are heavier than ceramic bearings due to the higher density of steel. This weight may not be as critical in all applications but could impact overall equipment weight and portability.

  • Corrosion Resistance:

Ceramic Ball Bearings:

Ceramic bearings have excellent corrosion resistance, making them suitable for applications in corrosive environments, such as marine or chemical industries.

Traditional Steel Ball Bearings:

Steel bearings are susceptible to corrosion, especially in harsh environments. Stainless steel variants offer improved corrosion resistance but may still corrode over time.

  • Speed and Precision:

Ceramic Ball Bearings:

Ceramic bearings can operate at higher speeds due to their lower friction and ability to withstand higher temperatures. They are also known for their high precision and low levels of thermal expansion.

Traditional Steel Ball Bearings:

Steel bearings can operate at high speeds as well, but their heat generation may limit performance in certain applications. Precision steel bearings are also available but may have slightly different characteristics compared to ceramics.

  • Cost:

Ceramic Ball Bearings:

Ceramic bearings are generally more expensive to manufacture than steel bearings due to the cost of ceramic materials and the challenges in producing precision ceramic components.

Traditional Steel Ball Bearings:

Steel bearings are often more cost-effective to manufacture, making them a more economical choice for many applications.

In conclusion, ceramic ball bearings and traditional steel ball bearings offer different performance characteristics. Ceramic bearings excel in terms of low friction, heat generation, corrosion resistance, and weight reduction. Steel bearings are durable, cost-effective, and widely used in various applications. The choice between the two depends on the specific requirements of the application, such as speed, precision, corrosion resistance, and budget considerations.

ball bearing

What is a Ball Bearing and How does it Function in Various Applications?

A ball bearing is a type of rolling-element bearing that uses balls to reduce friction between moving parts and support radial and axial loads. It consists of an outer ring, an inner ring, a set of balls, and a cage that separates and maintains a consistent spacing between the balls. Here’s how ball bearings function in various applications:

  • Reduction of Friction:

Ball bearings function by replacing sliding friction with rolling friction. The smooth, spherical balls minimize the contact area between the inner and outer rings, resulting in lower friction and reduced heat generation.

  • Radial and Axial Load Support:

Ball bearings are designed to support both radial loads (forces perpendicular to the shaft’s axis) and axial loads (forces parallel to the shaft’s axis). The distribution of balls within the bearing ensures load-carrying capacity in multiple directions.

  • Smooth Rotational Movement:

Ball bearings facilitate smooth and precise rotational movement. The rolling motion of the balls allows for controlled and continuous rotation with minimal resistance.

  • Applications in Machinery:

Ball bearings are used in a wide range of machinery and equipment, including motors, generators, gearboxes, conveyors, and fans. They enable the efficient transfer of motion while reducing wear and energy losses.

  • Automotive Industry:

Ball bearings are extensively used in automobiles for various applications, including wheel hubs, transmission systems, steering mechanisms, and engine components. They provide reliability and durability in challenging automotive environments.

  • Industrial Machinery:

In industrial settings, ball bearings support rotating shafts and ensure the smooth operation of equipment such as pumps, compressors, and machine tools.

  • High-Speed Applications:

Ball bearings are suitable for high-speed applications due to their low friction and ability to accommodate rapid rotation. They are used in applications like electric motors and aerospace components.

  • Precision Instruments:

For precision instruments, such as watches, cameras, and medical devices, ball bearings provide accurate rotational movement and contribute to the overall performance of the instrument.

  • Variety of Sizes and Types:

Ball bearings come in various sizes, configurations, and materials to suit different applications. Different types include deep groove ball bearings, angular contact ball bearings, thrust ball bearings, and more.

In summary, ball bearings are essential components in a wide range of applications where smooth rotation, load support, and reduced friction are critical. Their versatility, reliability, and efficiency make them indispensable in industries spanning from automotive to industrial machinery to precision instruments.

China Best Sales Bearing Rolamentos 6303-2RS High Precision Double Sealed Deep Groove Ball Bearing with Chrome Steel connecting rod bearingChina Best Sales Bearing Rolamentos 6303-2RS High Precision Double Sealed Deep Groove Ball Bearing with Chrome Steel connecting rod bearing
editor by CX 2024-02-07

China factory Miniature Ball Bearing Size Chart 692zz 693zz 694zz 685zz 696zz 687zz 688zz 689zz 609zz 6900zz 6901zz 6902zz 6903zz Metric Miniature Ball Bearing deep groove ball bearing

Product Description

 

 

PRODUCTS CATALOGUE

PART NUMBER SEAL TYPE Bore diameter(d) Outer diameter(D) Width(B) BALL SIZE(mm) BALL QTY weight(g)
681 open 1 3 1 0.6 6 0.03
691 open 1 4 1.6 0.8 5 0.11
681X open 1.5 4 1.2 0.6 7 0.1
681xzz Shield 1.5 4 2 0.6 7 0.14
691X open 1.5 5 2 0.6 6 0.2
691XZZ Shield 1.5 5 2.6 0.6 6 0.25
601X open 1.5 6 2.5 1.2 6 0.31
601XZZ Shield 1.5 6 3 1.2 6 0.4
682 open 2 5 1.5 0.8 6 0.15
682zz Shield 2 5 2.3 0.8 6 0.2
682-2RS Rubber seal 2 5 2.3 0.8 6 0.2
MR52 open 2 5 2 0.8 6 0.14
MR52ZZ Shield 2 5 2.5 0.8 6 0.2
MR52-2RS Rubber seal 2 5 2.5 0.8 6 0.2
692 open 2 6 2.3 1.2 6 0.28
692ZZ Shield 2 6 3 1.2 6 0.35
692-2RS Rubber seal 2 6 3 1.2 6 0.35
MR62 open 2 6 2.5 1.2 6 0.28
MR62ZZ Shield 2 6 2.5 1.2 6 0.33
MR62-2RS Rubber seal 2 6 2.5 1.2 6 0.33
MR72 open 2 7 2.5 1.2 7 0.43
MR72ZZ Shield 2 7 3 1.2 7 0.53
MR72-2RS Rubber seal 2 7 3 1.2 7 0.53
602 open 2 7 2.8 1.2 7 0.5
602ZZ Shield 2 7 3.5 1.2 7 0.6
602-2RS Rubber seal 2 7 3.5 1.2 7 0.6
682X open 2.5 6 1.8 0.8 8 0.2
682XZZ Shield 2.5 6 2.6 0.8 8 0.35
682X-2RS Rubber seal 2.5 6 2.6 0.8 8 0.35
692X open 2.5 7 2.5 1.2 7 0.4
692XZZ Shield 2.5 7 3.5 1.2 7 0.55
692X-2RS Rubber seal 2.5 7 3.5 1.2 7 0.55
MR82X open 2.5 8 2.5 1.588 6 0.52
MR82XZZ Shield 2.5 8 2.5 1.588 6 0.52
MR82X-2RS Rubber seal 2.5 8 2.5 1.588 6 0.52
602X open 2.5 8 2.8 1.588 6 0.61
602XZZ Shield 2.5 8 4 1.588 6 0.85
602X-2RS Rubber seal 2.5 8 4 1.588 6 0.85
MR63 open 3 6 2 0.8 8 0.2
MR63ZZ Shield 3 6 2.5 0.8 8 0.28
MR63-2RS Rubber seal 3 6 2.5 0.8 8 0.28
683 open 3 7 2 1 8 0.32
683ZZ Shield 3 7 3 1 8 0.45
683-2RS Rubber seal 3 7 3 1 8 0.45
MR83 open 3 8 2.5 1.2 7 0.51
MR83ZZ Shield 3 8 3 1.2 7 0.67
MR83-2RS Rubber seal 3 8 3 1.2 7 0.67
693 open 3 8 3 1.2 7 0.6
693ZZ Shield 3 8 4 1.2 7 0.8
693-2RS Rubber seal 3 8 4 1.2 7 0.8
MR93 open 3 9 2.5 1.588 6 0.75
MR93ZZ Shield 3 9 4 1.588 6 1.15
MR93-2RS Rubber seal 3 9 4 1.588 6 1.15
603 open 3 9 3 1.588 6 0.84
603ZZ Shield 3 9 5 1.588 6 1.13
603-2RS Rubber seal 3 9 5 1.588 6 1.13
623 open 3 10 4 1.588 7 1.45
623ZZ Shield 3 10 4 1.588 7 1.65
623-2RS Rubber seal 3 10 4 1.588 7 1.65
633 open 3 13 5 2.381 7 3.27
633ZZ Shield 3 13 5 2.381 7 3.43
633-2RS Rubber seal 3 13 5 2.381 7 3.43
MR74 open 4 7 2 1 8 0.23
MR74ZZ Shield 4 7 2.5 1 8 0.33
MR74-2RS Rubber seal 4 7 2.5 1 8 0.33
MR84 open 4 8 2 1.2 7 0.39
MR84ZZ Shield 4 8 3 1.2 7 0.56
MR84-2RS Rubber seal 4 8 3 1.2 7 0.56
684 open 4 9 2.5 1.588 7 0.65
684ZZ Shield 4 9 4 1.588 7 1
684-2RS Rubber seal 4 9 4 1.588 7 1
MR104 open 4 10 3 1.588 8 0.96
MR104ZZ Shield 4 10 4 1.588 8 1.33
MR104-2RS Rubber seal 4 10 4 1.588 8 1.33
694 open 4 11 4 2 7 1.69
694ZZ Shield 4 11 4 2 7 1.75
694-2RS Rubber seal 4 11 4 2 7 1.75
604 open 4 12 4 2 7 2.19
604ZZ Shield 4 12 4 2 7 2.34
604-2RS Rubber seal 4 12 4 2 7 2.34
624 open 4 13 5 2.381 7 3.1
624ZZ Shield 4 13 5 2.381 7 3.2
624-2RS Rubber seal 4 13 5 2.381 7 3.2
634 open 4 16 5 2.381 7 5.24
634ZZ Shield 4 16 5 2.381 7 5.44
634-2RS Rubber seal 4 16 5 2.381 7 5.44
MR85 open 5 8 2 1 8 0.25
MR85ZZ Shield 5 8 2.5 1 8 0.34
MR85-2RS Rubber seal 5 8 2.5 1 8 0.34
MR95 open 5 9 2.5 1.2 8 0.54
MR95ZZ Shield 5 9 3 1.2 8 0.58
MR95-2RS Rubber seal 5 9 3 1.2 8 0.58
MR105 open 5 10 3 1.2 8 0.58
MR105ZZ Shield 5 10 4 1.2 8 0.62
MR105-2RS Rubber seal 5 10 4 1.2 8 0.62
MR115 open 5 11 4 1.588 8 0.62
MR115ZZ Shield 5 11 4 1.588 8 0.62
MR115-2RS Rubber seal 5 11 4 1.588 8 0.62
685 open 5 11 3 1.588 8 1.16
685ZZ Shield 5 11 5 1.588 8 1.93
685-2RS Rubber seal 5 11 5 1.588 8 1.93
695 open 5 13 4 2 8 2.31
695ZZ Shield 5 13 4 2 8 2.39
695-2RS Rubber seal 5 13 4 2 8 2.39
605 open 5 14 5 2.381 7 3.46
605ZZ Shield 5 14 5 2.381 7 3.75
605-2RS Rubber seal 5 14 5 2.381 7 3.75
625 open 5 16 5 2.778 7 4.95
625ZZ Shield 5 16 5 2.778 7 5.1
625-2RS Rubber seal 5 16 5 2.778 7 5.1
635 open 5 19 6 3.5 6 8.5
635ZZ Shield 5 19 6 3.5 6 8.89
635-2RS Rubber seal 5 19 6 3.5 6 8.89
MR106 open 6 10 2.5 1.2 10 0.55
MR106ZZ Shield 6 10 3 1.2 10 0.7
MR106-2RS Rubber seal 6 10 3 1.2 10 0.7
MR126 open 6 12 3 1.588 8 1.25
MR126ZZ Shield 6 12 4 1.588 8 1.66
MR126-2RS Rubber seal 6 12 4 1.588 8 1.66
686 open 6 13 3.5 2 8 1.87
686ZZ Shield 6 13 5 2 8 2.68
686-2RS Rubber seal 6 13 5 2 8 2.68
696 open 6 15 5 2.381 7 3.65
696ZZ Shield 6 15 5 2.381 7 3.85
696-2RS Rubber seal 6 15 5 2.381 7 3.85
606 open 6 17 6 3.5 6 5.94
606ZZ Shield 6 17 6 3.5 6 6.89
606-2RS Rubber seal 6 17 6 3.5 6 6.89
626 open 6 19 6 3.5 6 8.12
626ZZ Shield 6 19 6 3.5 6 8.65
626-2RS Rubber seal 6 19 6 3.5 6 8.65
636 open 6 22 7 3.969 7 13.9
636ZZ Shield 6 22 7 3.969 7 14.5
636-2RS Rubber seal 6 22 7 3.969 7 14.5
MR117 open 7 11 2.5 1.2 9 0.59
MR117ZZ Shield 7 11 3 1.2 9 0.71
MR117-2RS Rubber seal 7 11 3 1.2 9 0.71
MR137 open 7 13 3 1.2 12 1.52
MR137ZZ Shield 7 13 4 1.2 12 2.01
MR137-2RS Rubber seal 7 13 4 1.2 12 2.01
687 open 7 14 3.5 2 9 2.03
687ZZ Shield 7 14 5 2 9 2.95
687-2RS Rubber seal 7 14 5 2 9 2.95
697 open 7 17 5 2 9 5.01
697ZZ Shield 7 17 5 2 9 5.26
697-2RS Rubber seal 7 17 5 2 9 5.26
607 open 7 19 6 3.5 6 7.8
607ZZ Shield 7 19 6 3.5 6 8.24
607-2RS Rubber seal 7 19 6 3.5 6 8.24
627 open 7 22 7 3.969 7 12.7
627ZZ Shield 7 22 7 3.969 7 13.1
627-2RS Rubber seal 7 22 7 3.969 7 13.1
637 open 7 26 9 4.762 7 24.2
637ZZ Shield 7 26 9 4.762 7 25.8
637-2RS Rubber seal 7 26 9 4.762 7 25.8
MR128 open 8 12 2.5 1.2 12 0.7
MR128ZZ Shield 8 12 3.5 1.2 12 0.99
MR128-2RS Rubber seal 8 12 3.5 1.2 12 0.99
MR148 open 8 14 3.5 1.588 10 1.9
MR148ZZ Shield 8 14 4 1.588 10 2.19
MR148-2RS Rubber seal 8 14 4 1.588 10 2.19
688 open 8 16 4 2 10 3.11
688ZZ Shield 8 16 5 2 10 4.05
688-2RS Rubber seal 8 16 5 2 10 4.05
698 open 8 19 6 3.175 7 7.12
698ZZ Shield 8 19 6 3.175 7 7.57
698-2RS Rubber seal 8 19 6 3.175 7 7.57
608 open 8 22 7 3.969 7 11.8
608ZZ Shield 8 22 7 3.969 7 12.9
608-2RS Rubber seal 8 22 7 3.969 7 12.9
628 open 8 24 8 3.969 7 17.1
628ZZ Shield 8 24 8 3.969 7 18.5
628-2RS Rubber seal 8 24 8 3.969 7 18.5
638 open 8 28 9 4.762 7 28.1
638ZZ Shield 8 28 9 4.762 7 30.3
638-2RS Rubber seal 8 28 9 4.762 7 30.3
679 open 9 14 3 1.588 12 1.35
679ZZ Shield 9 14 4.5 1.588 12 1.98
679-2RS Rubber seal 9 14 4.5 1.588 12 1.98
689 open 9 17 4 2 11 3.41
689ZZ Shield 9 17 5 2 11 4.38
689-2RS Rubber seal 9 17 5 2 11 4.38
699 open 9 20 6 3.175 8 8.38
699ZZ Shield 9 20 7 3.175 8 8.54
699-2RS Rubber seal 9 20 7 3.175 8 8.54
609 open 9 24 7 3.175 8 14.7
609ZZ Shield 9 24 7 3.175 8 16
609-2RS Rubber seal 9 24 7 3.175 8 16
629 open 9 26 8 4.762 7 19
629ZZ Shield 9 26 8 4.762 7 21.8
629-2RS Rubber seal 9 26 8 4.762 7 21.8
639 open 9 30 10 4.762 7 36.2
639ZZ Shield 9 30 10 4.762 7 37.1
639-2RS Rubber seal 9 30 10 4.762 7 37.1

 

   Established in 2007, HangZhou Runstar Bearings Manufacturing Co.,Ltd is a professional manufacturer of thrust ball bearing and miniature ball bearing in HangZhou,China.  With a inner diameter from 2mm to 15mm for metric series and from 0.0781″ to 0.375″ for inch series , the material can be selected with chrome steel(Gcr15) or stainless steel(9Cr18) at your request, our characteristic products are thrust ball bearing with or without groove, miniature ball bearing,flange bearing and  stainless steel bearing,as well as non-standard bearings, we have more than 12 year’s experience in supplying thrust ball bearing and miniature ball bearing for industries.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Precision Rating: ABEC-1,ABEC-3,ABEC-5
Cerficicate: ISO9001:2015,Reach and RoHS
Application: Machinery,Fishing Reel,Home Appliance
Samples:
US$ 2/Set
1 Set(Min.Order)

|

Order Sample

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.





about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

ball bearing

What are the Materials Typically Used in Manufacturing Ball Bearings and Their Advantages?

Ball bearings are manufactured using a variety of materials, each chosen for its specific properties and advantages in various applications. Here are some commonly used materials in ball bearing manufacturing and their respective benefits:

  • High-Carbon Chrome Steel (AISI 52100):

This is the most common material used for ball bearing manufacturing. It offers excellent hardness, wear resistance, and fatigue strength. High-carbon chrome steel bearings are suitable for a wide range of applications, from industrial machinery to automotive components.

  • Stainless Steel (AISI 440C, AISI 304, AISI 316):

Stainless steel bearings are corrosion-resistant and suitable for applications where moisture, chemicals, or exposure to harsh environments are concerns. AISI 440C offers high hardness and corrosion resistance, while AISI 304 and AISI 316 provide good corrosion resistance and are often used in food and medical industries.

  • Ceramic:

Ceramic bearings use silicon nitride (Si3N4) or zirconia (ZrO2) balls. Ceramic materials offer high stiffness, low density, and excellent resistance to corrosion and heat. Ceramic bearings are commonly used in high-speed and high-temperature applications, such as in aerospace and racing industries.

  • Plastic (Polyamide, PEEK):

Plastic bearings are lightweight and offer good corrosion resistance. Polyamide bearings are commonly used due to their low friction and wear properties. Polyether ether ketone (PEEK) bearings provide high-temperature resistance and are suitable for demanding environments.

  • Bronze:

Bronze bearings are often used in applications where self-lubrication is required. Bronze has good thermal conductivity and wear resistance. Bearings made from bronze are commonly used in machinery requiring frequent starts and stops.

  • Hybrid Bearings:

Hybrid bearings combine steel rings with ceramic balls. These bearings offer a balance between the advantages of both materials, such as improved stiffness and reduced weight. Hybrid bearings are used in applications where high speeds and low friction are essential.

  • Specialty Alloys:

For specific applications, specialty alloys may be used to meet unique requirements. For example, bearings used in extreme temperatures or corrosive environments may be made from materials like titanium or hastelloy.

  • Coated Bearings:

Bearings may also be coated with thin layers of materials like diamond-like carbon (DLC) or other coatings to enhance performance, reduce friction, and improve wear resistance.

The choice of material depends on factors such as application requirements, operating conditions, load, speed, and environmental factors. Selecting the right material is essential for ensuring optimal bearing performance, longevity, and reliability in diverse industries and applications.

ball bearing

How do Miniature Ball Bearings Differ from Standard-sized Ones, and Where are They Commonly Used?

Miniature ball bearings, as the name suggests, are smaller in size compared to standard-sized ball bearings. They have distinct characteristics and are designed to meet the unique requirements of applications that demand compactness, precision, and efficient rotation in confined spaces. Here’s how miniature ball bearings differ from standard-sized ones and where they are commonly used:

  • Size:

The most noticeable difference is their size. Miniature ball bearings typically have outer diameters ranging from a few millimeters to around 30 millimeters, while standard-sized ball bearings have larger dimensions suitable for heavier loads and higher speeds.

  • Load Capacity:

Due to their smaller size, miniature ball bearings have lower load-carrying capacities compared to standard-sized bearings. They are designed for light to moderate loads and are often used in applications where precision and compactness are prioritized over heavy load support.

  • Precision:

Miniature ball bearings are known for their high precision and accuracy. They are manufactured to tighter tolerances, making them suitable for applications requiring precise motion control and low levels of vibration.

  • Speed:

Miniature ball bearings can achieve higher speeds than standard-sized bearings due to their smaller size and lower mass. This makes them ideal for applications involving high-speed rotation.

  • Friction and Efficiency:

Miniature ball bearings generally have lower friction due to their smaller contact area. This contributes to higher efficiency and reduced heat generation in applications that require smooth and efficient motion.

  • Applications:

Miniature ball bearings find applications in various industries and sectors:

  • Electronics and Consumer Devices:

They are used in small motors, computer disk drives, printers, and miniature fans, where space is limited but precise motion is essential.

  • Medical and Dental Equipment:

Miniature bearings are used in medical devices such as surgical instruments, dental handpieces, and diagnostic equipment due to their precision and compactness.

  • Robotics and Automation:

Miniature ball bearings are integral to robotic arms, miniature conveyors, and automation systems, enabling precise movement in confined spaces.

  • Aerospace and Defense:

They are used in applications like UAVs (drones), aerospace actuators, and satellite components where size and weight constraints are critical.

  • Optics and Instrumentation:

Miniature bearings play a role in optical instruments, cameras, and measuring devices, providing smooth rotation and accurate positioning.

Overall, miniature ball bearings are specialized components designed for applications where space, precision, and efficient rotation are paramount. Their compactness and high precision make them crucial in various industries requiring reliable motion control in limited spaces.

ball bearing

How do Ball Bearings Differ from Other Types of Bearings like Roller Bearings?

Ball bearings and roller bearings are two common types of rolling-element bearings, each with distinct designs and characteristics. Here’s a comparison of ball bearings and roller bearings:

  • Design:

Ball Bearings: Ball bearings use spherical balls to separate and reduce friction between the bearing’s inner and outer rings. The balls enable rolling motion and smooth contact, minimizing friction.

Roller Bearings: Roller bearings, as the name suggests, use cylindrical or tapered rollers instead of balls. These rollers have larger contact areas, distributing loads over a broader surface.

  • Friction and Efficiency:

Ball Bearings: Due to the point contact between the balls and the rings, ball bearings have lower friction and are more efficient at high speeds.

Roller Bearings: Roller bearings have a larger contact area, resulting in slightly higher friction compared to ball bearings. They are more suitable for heavy-load applications where efficiency is prioritized over high speeds.

  • Load Capacity:

Ball Bearings: Ball bearings excel at handling light to moderate loads in both radial and axial directions. They are commonly used in applications where smooth rotation and low friction are important.

Roller Bearings: Roller bearings have a higher load-carrying capacity than ball bearings. They can support heavier radial and axial loads and are preferred for applications with significant loads or impact forces.

  • Variability:

Ball Bearings: Ball bearings come in various designs, including deep groove, angular contact, and thrust ball bearings, each suitable for different applications.

Roller Bearings: Roller bearings have diverse types, including cylindrical, spherical, tapered, and needle roller bearings, each optimized for specific load and motion requirements.

  • Speed Capability:

Ball Bearings: The reduced friction in ball bearings makes them suitable for high-speed applications, such as electric motors and precision machinery.

Roller Bearings: Roller bearings can handle higher loads but are generally better suited for moderate to low speeds due to slightly higher friction.

  • Applications:

Ball Bearings: Ball bearings are used in applications where smooth motion, low friction, and moderate loads are essential, such as electric fans, bicycles, and some automotive components.

Roller Bearings: Roller bearings find applications in heavy machinery, construction equipment, automotive transmissions, and conveyor systems, where heavier loads and durability are crucial.

In summary, ball bearings and roller bearings differ in their design, friction characteristics, load capacities, speed capabilities, and applications. The choice between them depends on the specific requirements of the machinery and the type of loads and forces involved.

China factory Miniature Ball Bearing Size Chart 692zz 693zz 694zz 685zz 696zz 687zz 688zz 689zz 609zz 6900zz 6901zz 6902zz 6903zz Metric Miniature Ball Bearing deep groove ball bearingChina factory Miniature Ball Bearing Size Chart 692zz 693zz 694zz 685zz 696zz 687zz 688zz 689zz 609zz 6900zz 6901zz 6902zz 6903zz Metric Miniature Ball Bearing deep groove ball bearing
editor by CX 2024-02-07

China OEM 6900 Auto Part Machine Part Wheel Bearing 6000 6200 6300 6400 6700 6800 6900 Zz 2RS Deep Groove Ball Bearing for Electrical Motor, Fan, Skateboard connecting rod bearing

Product Description

 

Product Description

Basic Info.
 

Model NO. 6900 Inner Diameter 10mm
Load Direction Radial Bearing Outer Diameter 22mm
Bearings Type Ball Bearing/Roller Bearing/Auto Bearing Rows Number Single
Feature Long Life, High Speed, Low Noise Material Gcr15, Chrome Steel, Stainless Steel, Carbon Steel
Precision P0 P6 P5 P4 P2 Application Ceiling Fan, Household Range, Car, Motor, Fan, Motorcycle Agriculture Mechanical
Vibration Z1V1, Z2V2, Z3V3; Z4V4 Cage Steel Cage.Copper Cage.Nylon Cage
Lubrication Grease/Oil Seals Type Open/Zz/2RS
MOQ 2PCS Clearance C0 /C2/C3
Stock Rich Stocks Samples Available
Transport by Sea or by Air  Transport Package Box,Carton,Wooden Box,Plastic Tube or Per buyers requirement
Specification 10×22×6mm Trademark Allout, OEM, Neutral
Origin HangZhou,ZHangZhoug, China HS Code 8482157100
Production Capacity 200000/Month Warranty One Year

Product Description
Auto Part motorcycle spare part wheel bearing 6402 Zz 2RS Deep Groove Ball Bearing for Electrical Motor, fan,skateboard

General information of Allout deep groove ball bearing

Allout deep groove ball bearing consists of an outer ring, an inner ring, a group of steel balls and a group of cages. Deep groove ball structure is also divided into seal and open structure. The open type means that the bearing has no sealing structure. The sealed deep groove ball is divided into dust-proof seal and oil-proof seal. The dust-proof seal cover is made of steel plate, which only serves as a simple way to prevent dust from entering the bearing raceway. The oil-proof type is a contact oil seal, which can effectively prevent grease overflow in the bearing.
 

Technical parameter of Allout deep groove ball bearing
 

Model NO. Inner Diameter
(mm)		 outer
Diameter
(mm)		 Width/height Basic Load Rating(N) Limiting speed(rpm) Weight 
B C Cr Cor Grease Oil kg
693 3 8 3 4 430 178 60000 67000 0.0006
694 4 11 4 4 960 350 48000 56000 0.0008
695 5 13 4 4 1070 420 43000 50000 0.0571
696 6 15 5 5 1470 600 40000 45000 0.0038
697 7 17 5 5 1600 710 36000 43000 0.0052
698 8 19 6 6 2230 910 36000 43000 0.007
699 9 20 6 6 2480 1090 34000 40000 0.0082
6900 10 22 6 6 2690 1270 30000 36000 0.01
6901 12 24 6 6 2890 1460 30000 36000 0.011
6902 15 28 7 7 4320 2250 24000 28000 0.017
6903 17 30 7 7 4590 2550 22000 26000 0.018
6904 20 37 9 9 6370 3680 19000 23000 0.036
6905 25 42 9 9 6660 4180 16000 19000 0.042
6906 30 47 9 9 7240 5571 14000 17000 0.048
6907 35 55 10 10 10390 7160 12000 15000 0.074
6908 40 62 12 12 13571 9200 11000 13000 0.11
6909 45 68 12 12 13940 10130 9800 12000 0.128
6910 50 72 12 12 13900 1571 8900 11000 0.132
6911 55 80 13 13 14820 12690 8200 9600 0.18
6912 60 85 13 13 15080 13480 7600 8900 0.193
6913 65 90 13 13 19950 17490 7000 8200 0.206
6914 70 100 16 16 25950 21850 6500 7700 0.334
6915 75 105 16 16 26780 23560 6100 7200 0.353
6916 80 110 16 16 27590 25280 5700 6700 0.373

 

Our Advantages

 

Packaging & Shipping

 

Company Profile

HangZhou Abico Bearing Co., Ltd Was Founded in 2018 and Integrates R&D, Manufacturing, Trading, Sales of Bearings, Rollers, Pulleys.

We have passed the ISO 9001: 2008, ISO 14001: 2004, CE, SGS with a factory Over 13, 000 Square Meters. We Are Specialized in Deep Groove Ball Bearings, Special Bearings.

We provide wide range of safety products such as class 0 deep groove ball bearings, stainless steel bearings, non-standard customized bearings and British R series. The main products cover 60,62, 63, 67, 68, 69 series, the annual output of more than 60 million sets of bearings. Products are widely used in household appliances, micro motors, power tools, motorcycles, automobiles, medical equipment, sports machinery and agricultural machinery and many other fields.We also accept the processing with customers’ drawings and samples.

Our products have been sold well in Europe, South America, Africa and Southeast Asia.On the basis of sincere-cooperation, equality and mutual benefit.We would like to establish long-term business relationship with customers all over the world.Good quality, competitive price, and satisfying service are our promises as a reliable trading partner.
 

 

FAQ

 

Q1: Are you a Manufacturer or trading company?
Answer: We are professional manufactuer of bearings since 1998 with ISO standards.

 

Q2: Can I get a sample to check out the quality?
Answer: Sure, free samples are available for stock products if you can pay for the shipping cost.

 

Q3: Can you do OEM to print my logo/brand on the products?
Answer: Yes, we can print your logo/brand on the products, you just need to send us your logo/brand files, we will show you how it looks like.We can also make custom package to your request.

 

Q4: How soon can I expect my order to be finished?
Answer: We have regular stock for standard bearings that can be shipped right after your payment. It will take 15-60 days for new production order,which depends on your order quantity.

 

Q5: What if I receive defective products for my order?
Answer: All our bearings are 100% inspected strictly before packing. If any defective products received, please provide photos and video to show us the problem and help us improve the quality. New products will be sent to you as replacement if the probelm is product quality.

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Contact Angle: 0
Aligning: Non-Aligning Bearing
Separated: Unseparated
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.





about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

ball bearing

What are the Materials Typically Used in Manufacturing Ball Bearings and Their Advantages?

Ball bearings are manufactured using a variety of materials, each chosen for its specific properties and advantages in various applications. Here are some commonly used materials in ball bearing manufacturing and their respective benefits:

  • High-Carbon Chrome Steel (AISI 52100):

This is the most common material used for ball bearing manufacturing. It offers excellent hardness, wear resistance, and fatigue strength. High-carbon chrome steel bearings are suitable for a wide range of applications, from industrial machinery to automotive components.

  • Stainless Steel (AISI 440C, AISI 304, AISI 316):

Stainless steel bearings are corrosion-resistant and suitable for applications where moisture, chemicals, or exposure to harsh environments are concerns. AISI 440C offers high hardness and corrosion resistance, while AISI 304 and AISI 316 provide good corrosion resistance and are often used in food and medical industries.

  • Ceramic:

Ceramic bearings use silicon nitride (Si3N4) or zirconia (ZrO2) balls. Ceramic materials offer high stiffness, low density, and excellent resistance to corrosion and heat. Ceramic bearings are commonly used in high-speed and high-temperature applications, such as in aerospace and racing industries.

  • Plastic (Polyamide, PEEK):

Plastic bearings are lightweight and offer good corrosion resistance. Polyamide bearings are commonly used due to their low friction and wear properties. Polyether ether ketone (PEEK) bearings provide high-temperature resistance and are suitable for demanding environments.

  • Bronze:

Bronze bearings are often used in applications where self-lubrication is required. Bronze has good thermal conductivity and wear resistance. Bearings made from bronze are commonly used in machinery requiring frequent starts and stops.

  • Hybrid Bearings:

Hybrid bearings combine steel rings with ceramic balls. These bearings offer a balance between the advantages of both materials, such as improved stiffness and reduced weight. Hybrid bearings are used in applications where high speeds and low friction are essential.

  • Specialty Alloys:

For specific applications, specialty alloys may be used to meet unique requirements. For example, bearings used in extreme temperatures or corrosive environments may be made from materials like titanium or hastelloy.

  • Coated Bearings:

Bearings may also be coated with thin layers of materials like diamond-like carbon (DLC) or other coatings to enhance performance, reduce friction, and improve wear resistance.

The choice of material depends on factors such as application requirements, operating conditions, load, speed, and environmental factors. Selecting the right material is essential for ensuring optimal bearing performance, longevity, and reliability in diverse industries and applications.

ball bearing

Are there any Industry Standards or Certifications that Ball Bearings should Meet?

Yes, there are several industry standards and certifications that ball bearings should meet to ensure their quality, performance, and reliability. These standards help manufacturers, engineers, and customers assess the suitability of bearings for specific applications. Some of the key standards and certifications for ball bearings include:

  • ISO Standards:

The International Organization for Standardization (ISO) has developed a series of standards related to ball bearings. ISO 15 defines dimensions, boundary dimensions, and tolerances for radial bearings. ISO 281 specifies dynamic load ratings and calculation methods for bearings’ life calculations.

  • ABEC (Annular Bearing Engineering Committee) Ratings:

ABEC ratings are commonly used in North America to indicate the precision and performance of ball bearings. Ratings range from ABEC 1 (lowest precision) to ABEC 9 (highest precision). However, it’s important to note that ABEC ratings focus primarily on dimensional tolerances and do not encompass all aspects of bearing quality.

  • DIN Standards:

The German Institute for Standardization (Deutsches Institut für Normung, DIN) has published various standards related to ball bearings. DIN 625 covers dimensions for deep groove ball bearings, while DIN 616 provides guidelines for precision angular contact ball bearings.

  • JIS (Japanese Industrial Standards):

JIS standards are used in Japan and internationally to define the characteristics and dimensions of various products, including ball bearings. JIS B 1512 outlines the classification and dimensions of rolling bearings.

  • ASTM (American Society for Testing and Materials) Standards:

ASTM has standards that cover various aspects of bearing testing, performance, and materials. ASTM F2215, for instance, specifies the requirements for ball bearings used in surgical implants.

  • CE Marking:

CE marking indicates that a product complies with European Union health, safety, and environmental requirements. It may be required for bearings used in machinery intended to be sold within the EU market.

  • Industry-Specific Standards:

Various industries, such as aerospace, automotive, medical, and nuclear, have specific standards or certifications that bearings must meet to ensure safety, reliability, and compliance with industry-specific requirements.

  • Quality Management Systems:

Manufacturers that adhere to quality management systems, such as ISO 9001, demonstrate their commitment to consistent product quality and customer satisfaction. Certification to these systems indicates that the manufacturing process follows established protocols and best practices.

When selecting ball bearings, it’s important to consider the relevant standards and certifications that align with the application’s requirements. This ensures that the bearings meet recognized quality and performance criteria, ultimately contributing to reliable and efficient operation.

ball bearing

What Factors should be Considered when Selecting a Ball Bearing for a Particular Application?

Selecting the right ball bearing for a specific application involves careful consideration of various factors to ensure optimal performance, longevity, and reliability. Here are the key factors that should be taken into account:

  • Load Type and Magnitude:

Determine the type of load (radial, axial, or combined) and the magnitude of the load that the bearing will need to support. Choose a bearing with the appropriate load-carrying capacity to ensure reliable operation.

  • Speed and Operating Conditions:

Consider the rotational speed of the application and the operating conditions, such as temperature, humidity, and exposure to contaminants. Different bearing types and materials are suited for varying speeds and environments.

  • Accuracy and Precision:

For applications requiring high accuracy and precision, such as machine tool spindles or optical instruments, choose high-precision bearings that can maintain tight tolerances and minimize runout.

  • Space Limitations:

If the application has limited space, choose miniature or compact ball bearings that can fit within the available dimensions without compromising performance.

  • Thrust and Radial Loads:

Determine whether the application requires predominantly thrust or radial load support. Choose the appropriate type of ball bearing (thrust, radial, or angular contact) based on the primary load direction.

  • Alignment and Misalignment:

If the application experiences misalignment between the shaft and housing, consider self-aligning ball bearings that can accommodate angular misalignment.

  • Mounting and Installation:

Consider the ease of mounting and dismounting the bearing. Some applications may benefit from features like flanges or snap rings for secure installation.

  • Lubrication and Maintenance:

Choose a bearing with appropriate lubrication options based on the application’s speed and temperature range. Consider whether seals or shields are necessary to protect the bearing from contaminants.

  • Environmental Conditions:

Factor in the operating environment, including exposure to corrosive substances, chemicals, water, or dust. Choose materials and coatings that can withstand the specific environmental challenges.

  • Bearing Material:

Select a bearing material that suits the application’s requirements. Common materials include stainless steel for corrosion resistance and high-carbon chrome steel for general applications.

  • Bearing Arrangement:

Consider whether a single-row, double-row, or multiple bearings in a specific arrangement are needed to accommodate the loads and moments present in the application.

By carefully evaluating these factors, engineers and designers can choose the most suitable ball bearing that aligns with the specific demands of the application, ensuring optimal performance, durability, and overall operational efficiency.

China OEM 6900 Auto Part Machine Part Wheel Bearing 6000 6200 6300 6400 6700 6800 6900 Zz 2RS Deep Groove Ball Bearing for Electrical Motor, Fan, Skateboard connecting rod bearingChina OEM 6900 Auto Part Machine Part Wheel Bearing 6000 6200 6300 6400 6700 6800 6900 Zz 2RS Deep Groove Ball Bearing for Electrical Motor, Fan, Skateboard connecting rod bearing
editor by CX 2024-02-07

China manufacturer 10% off Track Roller U V W Groove Conveyor Pulleys Wheel Cam Follwer Sliding Rolling Spherical Guide Line Ball Bearing with high quality

Product Description

 

Track rollers-SG series   (mm)  
g dw d D C B L d2 H Cw(KN) Cow(KN) Frperm(KN)
SG15 8 6 5 17 8 5.75 20.46 8.6 1 1.27 0.82 1.3
SG15-10 9 10 5 17 8 5.75 25.5 8.6 1 1.27 0.82 1.3
SG20 25 8 6 24 11 7.25 28.62 11.1 1.2 3.4 1.7 1.3
SG25 49 10 8 30 14 8.5 35.77 13 1.5 3.67 2.28 1.3
SG35 136 12 12 42 19 12.5 48.93 18 1.5 8.5 5.1 5.1
SG15N 8 6 5 17 8 5.75 20.46 8.6 0.5 1.27 0.82 1.3
SG20N 25 8 6 24 11 7.25 28.62 11.1 0.7 3.4 1.7 1.3
SG25N 49 10 8 30 14 8.5 35.77 13 1 3.67 2.28 1.3
SG35N 136 12 12 42 19 12.5 48.93 18 1 8.5 5.1 5.1
LFR50/5-4N 8 4 5 16 7 5 18 6.9 0 2.02 0.93 1.3
LFR50/5-5 8 5 5 17 7 5 20 6.9 0 2.02 0.93 1.3
LFR50/5N 8 6 5 17 7 5 21 6.9 0 2.02 0.93 1.3
LFR50/8N 25 6 8 24 11 7 28 12.3 0 3.67 2.28 1.3
LFR50/8-8N 25 6 8 24 11 7 29 12.3 0 3.67 2.28 1.3

 

GNYAR   KG dw d D B C A a rs Cw(KN) Cow(KN)
LV20/7ZZ 17 10 7 22 11 11 14.5 120 0.3 3.78 2.05
LV20/8ZZ 49 10 8 30 14 14 18.1 120 0.3 5.13 2.67
LV202-38ZZ 87 10 15 38 17 17 22.25 120 0.5 8.47 5.37
LV202-40ZZ 110 10 15 40 18 18 22 120 0.5 8.47 5.37
LV201ZZ 130 20 12 41 20 20 28 120 0.3 8.47 5.37
LV201-14.2RS 107 14 12 39.9 18 18 24 1 19.05 0.75

 

Do you prefer that we remind you ?

Immediate and free call/email back

2nd step: the outside diameter of the bearing

  •  
  • A / Put your bearing on the grid as shown in the diagram.
  •  
  • B / Mark the outline of the outer ring. For more convenience, use a pencil with a fine point.
  •  
  • C / For ease of reading, do not hesitate to draw lines to the axes and then take the measurement.

 

 

 

 

3rd step: the thickness of the bearing

  •  
  • A / In the same way as for the outer diameter and the bore, place your bearing on the edge on the grid as shown in the diagram.
  • B / Draw the outer contour.
  •  
  • C / For ease of reading, do not hesitate to draw lines to the axes and then take the measurement.

 

Conclusion :

You now have 3 measuring elements that will allow you to identify your bearing: the inside diameter (or bore), the outside diameter, and the thickness.

You can postpone these measurements in our bearing search tool on our website

FAQ

 1.How many is the MOQ of your company?
   Our company MOQ is 1pcs.
 

2.Could you accept OEM and customize?
   YES, OEM is accepted and we can customize for you according to sample or drawing. 

 

3.How do you guaranee the quality?
Evaluate the samples and drawings before production
Eva;iate the production process,and following it in schedual,guarantee the delievery time in time.
Evaluate the bearing dimension,clearance,noise,rotations of final productions.
Evaluate the fause products,block it and make an improve action.
 

 

4.Do you have stocks?
   YES, we have most of the bearings showing on made in china in stock,please contact us for order details.

 

5.Do you have only Hubs Wheel Auto Bearing?

    YES,we have more others types bearings,ANY BEARING YOU CAN THINK OF NOW,WE HAVE!

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Contact Angle: Normal
Aligning: Non-Aligning Bearing
Separated: Unseparated
Rows Number: Single
Load Direction: Radial Bearing
Material: Bearing Steel
Customization:
Available

|

Customized Request

ball bearing

What are the Common Signs of Wear or Damage in Ball Bearings that Indicate the Need for Replacement?

Ball bearings are subjected to wear and stress during operation, and over time, they may exhibit signs of damage or deterioration that warrant replacement. Recognizing these signs is crucial to prevent catastrophic failure and ensure safe and reliable operation. Here are the common signs of wear or damage in ball bearings:

  • Unusual Noise:

If you hear unusual grinding, clicking, or rumbling noises coming from the bearing during operation, it may indicate worn-out or damaged components. Unusual noise suggests that the bearing is no longer operating smoothly.

  • Vibration:

Excessive vibration in the machinery can be a sign of bearing wear. Vibrations can result from uneven wear, misalignment, or damaged components within the bearing.

  • Increased Temperature:

Higher operating temperatures than usual may indicate increased friction due to inadequate lubrication, wear, or other issues. Monitoring the bearing’s temperature can help identify potential problems.

  • Irregular Movement:

If you notice irregular movement, jerking, or sticking during rotation, it could be a sign that the bearing is no longer operating smoothly. This may be due to damaged rolling elements or raceways.

  • Reduced Performance:

If the machinery’s performance has decreased, it may be due to a compromised bearing. Reduced efficiency, increased energy consumption, or a decline in overall performance could be indicators of bearing wear.

  • Visible Wear or Damage:

Inspect the bearing for visible signs of wear, such as pitting, scoring, or discoloration on the rolling elements or raceways. Severe wear or damage is a clear indication that the bearing needs replacement.

  • Leakage or Contamination:

If there is evidence of lubricant leakage, contamination, or the presence of foreign particles around the bearing, it suggests that the seal or shield may be compromised, leading to potential damage.

  • Looseness or Excessive Play:

If you can feel excessive play or looseness when manually moving the bearing, it could indicate worn-out components or misalignment.

  • Reduced Lifespan:

If the bearing’s expected lifespan is significantly shorter than usual, it may be due to inadequate lubrication, excessive loads, or improper installation, leading to accelerated wear.

  • Frequent Failures:

If the bearing is consistently failing despite regular maintenance and proper use, it could indicate a chronic issue that requires addressing, such as inadequate lubrication or misalignment.

It’s important to conduct regular inspections, monitor performance, and address any signs of wear or damage promptly. Replacing worn or damaged ball bearings in a timely manner can prevent further damage to machinery, reduce downtime, and ensure safe and efficient operation.

ball bearing

How do Ceramic Ball Bearings Compare to Traditional Steel Ball Bearings in Terms of Performance?

Ceramic ball bearings and traditional steel ball bearings have distinct characteristics that can impact their performance in various applications. Here’s a comparison of how these two types of bearings differ in terms of performance:

  • Material Composition:

Ceramic Ball Bearings:

Ceramic ball bearings use ceramic rolling elements, typically made from materials like silicon nitride (Si3N4) or zirconium dioxide (ZrO2). These ceramics are known for their high hardness, low density, and resistance to corrosion and wear.

Traditional Steel Ball Bearings:

Traditional steel ball bearings use steel rolling elements. The type of steel used can vary, but common materials include chrome steel (52100) and stainless steel (440C). Steel bearings are known for their durability and strength.

  • Friction and Heat:

Ceramic Ball Bearings:

Ceramic bearings have lower friction coefficients compared to steel bearings. This results in reduced heat generation during operation, contributing to higher efficiency and potential energy savings.

Traditional Steel Ball Bearings:

Steel bearings can generate more heat due to higher friction coefficients. This can lead to increased energy consumption in applications where efficiency is crucial.

  • Weight:

Ceramic Ball Bearings:

Ceramic bearings are lighter than steel bearings due to the lower density of ceramics. This weight reduction can be advantageous in applications where minimizing weight is important.

Traditional Steel Ball Bearings:

Steel bearings are heavier than ceramic bearings due to the higher density of steel. This weight may not be as critical in all applications but could impact overall equipment weight and portability.

  • Corrosion Resistance:

Ceramic Ball Bearings:

Ceramic bearings have excellent corrosion resistance, making them suitable for applications in corrosive environments, such as marine or chemical industries.

Traditional Steel Ball Bearings:

Steel bearings are susceptible to corrosion, especially in harsh environments. Stainless steel variants offer improved corrosion resistance but may still corrode over time.

  • Speed and Precision:

Ceramic Ball Bearings:

Ceramic bearings can operate at higher speeds due to their lower friction and ability to withstand higher temperatures. They are also known for their high precision and low levels of thermal expansion.

Traditional Steel Ball Bearings:

Steel bearings can operate at high speeds as well, but their heat generation may limit performance in certain applications. Precision steel bearings are also available but may have slightly different characteristics compared to ceramics.

  • Cost:

Ceramic Ball Bearings:

Ceramic bearings are generally more expensive to manufacture than steel bearings due to the cost of ceramic materials and the challenges in producing precision ceramic components.

Traditional Steel Ball Bearings:

Steel bearings are often more cost-effective to manufacture, making them a more economical choice for many applications.

In conclusion, ceramic ball bearings and traditional steel ball bearings offer different performance characteristics. Ceramic bearings excel in terms of low friction, heat generation, corrosion resistance, and weight reduction. Steel bearings are durable, cost-effective, and widely used in various applications. The choice between the two depends on the specific requirements of the application, such as speed, precision, corrosion resistance, and budget considerations.

ball bearing

Can you Explain the Various Types of Ball Bearings and their Specific Use Cases?

Ball bearings come in various types, each designed to meet specific application requirements. Here’s an overview of the different types of ball bearings and their specific use cases:

  • Deep Groove Ball Bearings:

Deep groove ball bearings are the most common and versatile type. They have a deep raceway that allows them to handle both radial and axial loads. They are used in a wide range of applications, including electric motors, household appliances, automotive components, and industrial machinery.

  • Angular Contact Ball Bearings:

Angular contact ball bearings have a contact angle that enables them to handle both radial and axial loads at specific angles. They are suitable for applications where combined loads or thrust loads need to be supported, such as in machine tool spindles, pumps, and agricultural equipment.

  • Self-Aligning Ball Bearings:

Self-aligning ball bearings have two rows of balls and are designed to accommodate misalignment between the shaft and the housing. They are used in applications where shaft deflection or misalignment is common, such as conveyor systems, textile machinery, and paper mills.

  • Thrust Ball Bearings:

Thrust ball bearings are designed to support axial loads in one direction. They are commonly used in applications where axial loads need to be supported, such as in automotive transmissions, steering systems, and crane hooks.

  • Single-Row vs. Double-Row Bearings:

Single-row ball bearings have a single set of balls and are suitable for moderate load and speed applications. Double-row ball bearings have two sets of balls and offer higher load-carrying capacity. Double-row designs are used in applications such as machine tool spindles and printing presses.

  • Miniature and Instrument Ball Bearings:

Miniature ball bearings are smaller in size and are used in applications with limited space and lower load requirements. They are commonly used in small electric motors, medical devices, and precision instruments.

  • Max-Type and Conrad Bearings:

Max-type ball bearings have a larger number of balls to increase load-carrying capacity. Conrad bearings have fewer balls and are used in applications with moderate loads and speeds.

  • High-Precision Ball Bearings:

High-precision ball bearings are designed for applications where accuracy and precision are critical, such as machine tool spindles, aerospace components, and optical instruments.

  • High-Speed Ball Bearings:

High-speed ball bearings are engineered to minimize friction and accommodate rapid rotation. They are used in applications such as dental handpieces, turbochargers, and centrifuges.

In summary, the various types of ball bearings are tailored to different application requirements, including load type, direction, speed, and environmental conditions. Selecting the appropriate type of ball bearing ensures optimal performance and longevity in specific applications.

China manufacturer 10% off Track Roller U V W Groove Conveyor Pulleys Wheel Cam Follwer Sliding Rolling Spherical Guide Line Ball Bearing with high qualityChina manufacturer 10% off Track Roller U V W Groove Conveyor Pulleys Wheel Cam Follwer Sliding Rolling Spherical Guide Line Ball Bearing with high quality
editor by CX 2024-02-06

China OEM High Quality Deep Groove Thrust Ball Cojinete, Rodamientos Bearing manufacturer

Product Description

Description of the bearing: 

Deep groove ball bearing are the most representative of rolling bearings, simple structure, easy to use and versatile. Such bearings are non-separable bearings, the inner and outer rings are rolled into a ditch arc type, can bear radial load axial load: Low coefficient of friction, high limiting speed, suitable for high-speed, low noise, low vibration occassions. 
Such bearing are widely used in automobiles, machine tools, motor, instrumentation, construction machinery, railway vehicles, agricultural machinery and various equipment industry machinery. 

About Our Company: 
1. With more than 25 years experiences of producing and R&D bearings. 
2. All of ours roller bearing and ball bearings with CE ISO TUV certificate
3. Our products have been exported to about 30 country/areas, and enjoyed a high reputation on the domestic and overseas market. 
4. The OEM, OES and ODM are available. 
5. Professional after-sales team. 
6. Offering most reasonable price. 

Similar series models: 

Basic Bearing No.  Bore Outer Diameter Width Radius Basic Load Weight
D D W R Rating KN Kg/PC
mm inch mm inch mm inch mm inch Dynamic Static       
        C C0   
6000 10.3937 26 1.5716 8.3150 0.3. 012 4.55 1.96 0.019
6001 12.4724 28 1.1571 8.3150 0.3. 012 5.1 2.39 0.571
6002 15.5906 32 1.2598 9.3543 0.3. 012 5.6 2.84 0.03
6003 17.6693 35 1.3780 10.3937 0.3. 012 6.8 3.35 0.039
6004 20.7874 42 1.6535 12.4724 0.6. 571 9.4 5.05 0.069
6005 25.9843 47 1.8504 12.4724 0.6. 571 10.1 5.85 0.08
6006 30 1.1811 55 2.1654 13.5118 1.0. 039 13.2 8.3 0.116
6007 35 1.3780 62 2.4409 14.5512 1.0. 039 16 10.3 0.155
6008 40 1.5748 68 2.6772 15.5906 1.0. 039 16.8 11.5 0.185
6009 45 1.7717 75 2.9528 16.6299 1.0. 039 21 15.1 0.231
6571 50 1.9685 80 3.1496 16.6299 1.0. 039 21.8 16.6 0.25
6011 55 2.1654 90 3.5433 18.7087 1.1.043 28.3 21.2 0.362
6012 60 2.3622 95 3.7402 18.7087 1.1. 043 29.5 23.2 0.385
6013 65 2.9551 100 3.9370 18.7087 1.1. 043 31.9 25 0.44
6014 70 2.7559 110 4.3307 20.7874 1.1. 043 39.7 31 0.6
6015 75 2.9528 115 4.5276 20.7874 1.1. 043 41.6 33.5 0.64
6016 80 3.1496 125 4.9213 22.8681 1.1. 043 47.5 40 0.854
6017 85 3.3465 130 5.1181 22.8681 1.1. 043 49.5 43 0.89
6018 90 3.5433 140 5.5118 24.9449 1.5. 059 58 49.5 1. 02

Main products: 
1. Deep Groove Ball Bearings
2. Spherical Roller Bearing
3. Tapered Roller Bearing
4. Thrust Ball Bearing
5. Cylindrical Roller Bearing
6. Angular Contact Ball Bearing
7. Pillow Block Bearing
8. Other types of bearings

FAQ: 
1. Are you a factory or a trading company? 
ZheJiang XSY bearing Co., Ltd. is a professional factory of deep groove ball bearings
2. Is OEM available? 
Yes, OEM is available. We have professional designer to help your brand promotion. 
3. Is the sample available? 
Yes, samples are available for you to test the quality. 
4. Have the products been tested before shipping? 
Yes, all of our bearings have been tested before delivery. 
5. What’s benefit will you bring? 
Your clients will be satisfied of the quality. 
Your clients continue orders. 
Your can get good reputation from your market and obtain more orders. 

Our Package: 
*industrial pakage+outer carton+pallets
*sigle box+outer carton+pallets
*Tube package+middle box+outer carton+pallets
*According to your requirments

Delivery method: 

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Presicion: P0 P6 P5 P4 P2
Noise: Z1, Z2, Z3
Vibration: V1, V2, V3
Samples:
US$ 5/Piece
1 Piece(Min.Order)

|

Order Sample
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.





about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

ball bearing

How does Preload Affect the Performance and Efficiency of Ball Bearings?

Preload is a crucial factor in ball bearing design that significantly impacts the performance, efficiency, and overall behavior of the bearings in various applications. Preload refers to the intentional axial force applied to the bearing’s rolling elements before it is mounted. This force eliminates internal clearance and creates contact between the rolling elements and the raceways. Here’s how preload affects ball bearing performance:

  • Reduction of Internal Clearance:

Applying preload reduces the internal clearance between the rolling elements and the raceways. This eliminates play within the bearing, ensuring that the rolling elements are in constant contact with the raceways. This reduced internal clearance enhances precision and reduces vibrations during operation.

  • Increased Stiffness:

Preloaded bearings are stiffer due to the elimination of internal clearance. This increased stiffness improves the bearing’s ability to handle axial and radial loads with higher accuracy and minimal deflection.

  • Minimized Axial Play:

Preload minimizes or eliminates axial play within the bearing. This is especially important in applications where axial movement needs to be minimized, such as machine tool spindles and precision instruments.

  • Enhanced Rigidity:

The stiffness resulting from preload enhances the bearing’s rigidity, making it less susceptible to deformation under load. This is critical for maintaining precision and accuracy in applications that require minimal deflection.

  • Reduction in Ball Slippage:

Preload reduces the likelihood of ball slippage within the bearing, ensuring consistent contact between the rolling elements and the raceways. This leads to improved efficiency and better load distribution.

  • Improved Running Accuracy:

Preloading enhances the running accuracy of the bearing, ensuring that it maintains precise rotational characteristics even under varying loads and speeds. This is essential for applications requiring high accuracy and repeatability.

  • Optimized Performance at High Speeds:

Preload helps prevent skidding and slipping of the rolling elements during high-speed operation. This ensures that the bearing remains stable, reducing the risk of noise, vibration, and premature wear.

  • Impact on Friction and Heat Generation:

While preload reduces internal clearance and friction, excessive preload can lead to higher friction and increased heat generation. A balance must be struck between optimal preload and minimizing friction-related issues.

  • Application-Specific Considerations:

The appropriate amount of preload depends on the application’s requirements, such as load, speed, accuracy, and operating conditions. Over-preloading can lead to increased stress and premature bearing failure, while under-preloading may result in inadequate rigidity and reduced performance.

Overall, preload plays a critical role in optimizing the performance, accuracy, and efficiency of ball bearings. Engineers must carefully determine the right preload level for their specific applications to achieve the desired performance characteristics and avoid potential issues related to overloading or inadequate rigidity.

ball bearing

What Precautions should be taken to Prevent Contamination of Ball Bearings in Industrial Settings?

Preventing contamination of ball bearings is essential to ensure their proper function, longevity, and overall performance in industrial settings. Contaminants such as dust, dirt, debris, and particles can significantly impact bearing operation. Here are important precautions to take to prevent contamination of ball bearings:

  • Effective Sealing:

Choose ball bearings with appropriate seals or shields to prevent the ingress of contaminants. Seals provide a physical barrier against dust, moisture, and particles, ensuring the bearing’s interior remains clean.

  • Clean Environment:

Maintain a clean working environment around the machinery and equipment. Regularly clean the surrounding areas to prevent the accumulation of dirt and debris that could enter the bearings.

  • Proper Handling:

Handle bearings with clean hands and use gloves if necessary. Avoid touching the bearing surfaces with bare hands, as natural skin oils can transfer contaminants onto the bearing.

  • Clean Tools and Equipment:

Use clean tools and equipment during installation and maintenance to prevent introducing contaminants. Ensure that tools are properly cleaned before coming into contact with the bearing components.

  • Contamination-Controlled Workstations:

Establish contamination-controlled workstations for bearing handling, installation, and maintenance. These areas should have proper ventilation, filtered air, and minimal exposure to external contaminants.

  • Proper Lubrication:

Use the correct lubricant in appropriate quantities. Lubricants help create a barrier against contaminants and reduce friction. Regularly inspect and replenish lubrication to maintain its effectiveness.

  • Regular Inspections:

Implement a routine inspection schedule to monitor the condition of the bearings. Look for signs of contamination, wear, and damage. Address any issues promptly to prevent further damage.

  • Training and Education:

Train personnel on proper handling, installation, and maintenance practices to minimize the risk of contamination. Educated employees are more likely to take precautions and prevent accidental contamination.

  • Environmental Controls:

In sensitive environments, such as clean rooms or medical facilities, implement strict environmental controls to minimize the presence of contaminants that could affect bearing performance.

  • Regular Cleaning and Maintenance:

Perform regular cleaning and maintenance of machinery and equipment to prevent the buildup of contaminants. Keep bearings protected during maintenance to prevent debris from entering during the process.

  • Selection of Suitable Bearings:

Choose bearings that are specifically designed for the application’s environmental conditions. Some bearings have advanced sealing options or specialized coatings that enhance contamination resistance.

By implementing these precautions, industries can significantly reduce the risk of contamination in ball bearings, ensuring smooth operation, extended bearing life, and enhanced equipment reliability.

ball bearing

What Factors should be Considered when Selecting a Ball Bearing for a Particular Application?

Selecting the right ball bearing for a specific application involves careful consideration of various factors to ensure optimal performance, longevity, and reliability. Here are the key factors that should be taken into account:

  • Load Type and Magnitude:

Determine the type of load (radial, axial, or combined) and the magnitude of the load that the bearing will need to support. Choose a bearing with the appropriate load-carrying capacity to ensure reliable operation.

  • Speed and Operating Conditions:

Consider the rotational speed of the application and the operating conditions, such as temperature, humidity, and exposure to contaminants. Different bearing types and materials are suited for varying speeds and environments.

  • Accuracy and Precision:

For applications requiring high accuracy and precision, such as machine tool spindles or optical instruments, choose high-precision bearings that can maintain tight tolerances and minimize runout.

  • Space Limitations:

If the application has limited space, choose miniature or compact ball bearings that can fit within the available dimensions without compromising performance.

  • Thrust and Radial Loads:

Determine whether the application requires predominantly thrust or radial load support. Choose the appropriate type of ball bearing (thrust, radial, or angular contact) based on the primary load direction.

  • Alignment and Misalignment:

If the application experiences misalignment between the shaft and housing, consider self-aligning ball bearings that can accommodate angular misalignment.

  • Mounting and Installation:

Consider the ease of mounting and dismounting the bearing. Some applications may benefit from features like flanges or snap rings for secure installation.

  • Lubrication and Maintenance:

Choose a bearing with appropriate lubrication options based on the application’s speed and temperature range. Consider whether seals or shields are necessary to protect the bearing from contaminants.

  • Environmental Conditions:

Factor in the operating environment, including exposure to corrosive substances, chemicals, water, or dust. Choose materials and coatings that can withstand the specific environmental challenges.

  • Bearing Material:

Select a bearing material that suits the application’s requirements. Common materials include stainless steel for corrosion resistance and high-carbon chrome steel for general applications.

  • Bearing Arrangement:

Consider whether a single-row, double-row, or multiple bearings in a specific arrangement are needed to accommodate the loads and moments present in the application.

By carefully evaluating these factors, engineers and designers can choose the most suitable ball bearing that aligns with the specific demands of the application, ensuring optimal performance, durability, and overall operational efficiency.

China OEM High Quality Deep Groove Thrust Ball Cojinete, Rodamientos Bearing manufacturerChina OEM High Quality Deep Groove Thrust Ball Cojinete, Rodamientos Bearing manufacturer
editor by CX 2024-02-06

China Hot selling 6904 Auto Part Motorcycle Spare Part Wheel Bearing 6000 6200 6300 6400 6700 6800 6900 Zz 2RS Deep Groove Ball Bearing for Electrical Motor, Fan, Skateboard with Best Sales

Product Description

 

Product Description

Basic Info.

Model NO. 6904 Inner Diameter 20mm
Load Direction Radial Bearing Outer Diameter 37mm
Bearings Type Ball Bearing/Roller Bearing/Auto Bearing Rows Number Single
Feature Long Life, High Speed, Low Noise Material Gcr15, Chrome Steel, Stainless Steel, Carbon Steel
Precision P0 P6 P5 P4 P2 Application Ceiling Fan, Household Range, Car, Motor, Fan, Motorcycle Agriculture Mechanical
Vibration Z1V1, Z2V2, Z3V3; Z4V4 Cage Steel Cage.Copper Cage.Nylon Cage
Lubrication Grease/Oil Seals Type Open/Zz/2RS
MOQ 2PCS Clearance C0 /C2/C3
Stock Rich Stocks Samples Available
Transport by Sea or by Air  Transport Package Box,Carton,Wooden Box,Plastic Tube or Per buyers requirement
Specification 20×37×9mm Trademark Allout, OEM, Neutral
Origin HangZhou,ZHangZhoug, China HS Code 8482157100
Production Capacity 200000/Month Warranty One Year

Product Description
Auto Part motorcycle spare part wheel bearing 6402 Zz 2RS Deep Groove Ball Bearing for Electrical Motor, fan,skateboard

General information of Allout deep groove ball bearing

Allout deep groove ball bearing consists of an outer ring, an inner ring, a group of steel balls and a group of cages. Deep groove ball structure is also divided into seal and open structure. The open type means that the bearing has no sealing structure. The sealed deep groove ball is divided into dust-proof seal and oil-proof seal. The dust-proof seal cover is made of steel plate, which only serves as a simple way to prevent dust from entering the bearing raceway. The oil-proof type is a contact oil seal, which can effectively prevent grease overflow in the bearing.
 

Technical parameter of Allout deep groove ball bearing
 

Model NO. Inner Diameter
(mm)		 outer
Diameter
(mm)		 Width/height Basic Load Rating(N) Limiting speed(rpm) Weight 
B C Cr Cor Grease Oil kg
693 3 8 3 4 430 178 60000 67000 0.0006
694 4 11 4 4 960 350 48000 56000 0.0008
695 5 13 4 4 1070 420 43000 50000 0.0571
696 6 15 5 5 1470 600 40000 45000 0.0038
697 7 17 5 5 1600 710 36000 43000 0.0052
698 8 19 6 6 2230 910 36000 43000 0.007
699 9 20 6 6 2480 1090 34000 40000 0.0082
6900 10 22 6 6 2690 1270 30000 36000 0.01
6901 12 24 6 6 2890 1460 30000 36000 0.011
6902 15 28 7 7 4320 2250 24000 28000 0.017
6903 17 30 7 7 4590 2550 22000 26000 0.018
6904 20 37 9 9 6370 3680 19000 23000 0.036
6905 25 42 9 9 6660 4180 16000 19000 0.042
6906 30 47 9 9 7240 5571 14000 17000 0.048
6907 35 55 10 10 10390 7160 12000 15000 0.074
6908 40 62 12 12 13571 9200 11000 13000 0.11
6909 45 68 12 12 13940 10130 9800 12000 0.128
6910 50 72 12 12 13900 1571 8900 11000 0.132
6911 55 80 13 13 14820 12690 8200 9600 0.18
6912 60 85 13 13 15080 13480 7600 8900 0.193
6913 65 90 13 13 19950 17490 7000 8200 0.206
6914 70 100 16 16 25950 21850 6500 7700 0.334
6915 75 105 16 16 26780 23560 6100 7200 0.353
6916 80 110 16 16 27590 25280 5700 6700 0.373

 

Our Advantages

 

Packaging & Shipping

 

Company Profile

HangZhou Abico Bearing Co., Ltd Was Founded in 2018 and Integrates R&D, Manufacturing, Trading, Sales of Bearings, Rollers, Pulleys.

We have passed the ISO 9001: 2008, ISO 14001: 2004, CE, SGS with a factory Over 13, 000 Square Meters. We Are Specialized in Deep Groove Ball Bearings, Special Bearings.

We provide wide range of safety products such as class 0 deep groove ball bearings, stainless steel bearings, non-standard customized bearings and British R series. The main products cover 60,62, 63, 67, 68, 69 series, the annual output of more than 60 million sets of bearings. Products are widely used in household appliances, micro motors, power tools, motorcycles, automobiles, medical equipment, sports machinery and agricultural machinery and many other fields.We also accept the processing with customers’ drawings and samples.

Our products have been sold well in Europe, South America, Africa and Southeast Asia.On the basis of sincere-cooperation, equality and mutual benefit.We would like to establish long-term business relationship with customers all over the world.Good quality, competitive price, and satisfying service are our promises as a reliable trading partner.
 

 

FAQ

 

Q1: Are you a Manufacturer or trading company?
Answer: We are professional manufactuer of bearings since 1998 with ISO standards.

 

Q2: Can I get a sample to check out the quality?
Answer: Sure, free samples are available for stock products if you can pay for the shipping cost.

 

Q3: Can you do OEM to print my logo/brand on the products?
Answer: Yes, we can print your logo/brand on the products, you just need to send us your logo/brand files, we will show you how it looks like.We can also make custom package to your request.

 

Q4: How soon can I expect my order to be finished?
Answer: We have regular stock for standard bearings that can be shipped right after your payment. It will take 15-60 days for new production order,which depends on your order quantity.

 

Q5: What if I receive defective products for my order?
Answer: All our bearings are 100% inspected strictly before packing. If any defective products received, please provide photos and video to show us the problem and help us improve the quality. New products will be sent to you as replacement if the probelm is product quality.

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Field: Conveyor, Diesel Hydraulic, Pump, Car Accessories
Application: Pump, Motorcycle, Washing Machine, Car
Inner Diameter: 20
Outer Diameter: 37
Aligning: Non-Aligning Bearing
Separated: Unseparated
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

ball bearing

What are the Challenges Associated with Noise Reduction in Ball Bearings?

Noise reduction in ball bearings is a crucial consideration, especially in applications where noise levels must be minimized for operational efficiency and user comfort. While ball bearings are designed to operate smoothly, there are several challenges associated with reducing noise in their operation:

  • Vibration:

Vibration generated by the movement of rolling elements and raceways can lead to noise. Even minor irregularities in bearing components or the mounting system can cause vibration that translates into audible noise.

  • Bearing Type and Design:

The type and design of the ball bearing can impact noise generation. For example, deep groove ball bearings are known for their quiet operation, while angular contact bearings can generate more noise due to their higher contact angles.

  • Lubrication:

Improper or inadequate lubrication can result in increased friction and wear, leading to noise. Choosing the right lubricant and maintaining proper lubrication levels are essential for reducing noise in ball bearings.

  • Bearing Clearance and Preload:

Incorrect clearance or preload settings can lead to noise issues. Excessive clearance or inadequate preload can cause the rolling elements to impact the raceways, resulting in noise during rotation.

  • Material and Manufacturing Quality:

The quality of materials and manufacturing processes can affect noise levels. Inconsistent or low-quality materials, improper heat treatment, or manufacturing defects can lead to noise generation during operation.

  • Surface Finish:

The surface finish of the rolling elements and raceways can impact noise. Rough surfaces can generate more noise due to increased friction and potential irregularities.

  • Sealing and Shielding:

Seals and shields that protect bearings can influence noise levels. While they are necessary for contamination prevention, they can also cause additional friction and generate noise.

  • Operating Conditions:

External factors such as temperature, speed, and load can influence noise levels. High speeds or heavy loads can amplify noise due to increased stress on the bearing components.

  • Wear and Deterioration:

As ball bearings wear over time, noise levels can increase. Worn components or inadequate lubrication can lead to more significant noise issues as the bearing operates.

To address these challenges and reduce noise in ball bearings, manufacturers and engineers employ various techniques, such as optimizing design, selecting suitable bearing types, using proper lubrication, maintaining accurate preload settings, and ensuring high-quality materials and manufacturing processes. Noise reduction efforts are essential to improve overall product quality, meet noise regulations, and enhance user experience in various applications.

ball bearing

How do Miniature Ball Bearings Differ from Standard-sized Ones, and Where are They Commonly Used?

Miniature ball bearings, as the name suggests, are smaller in size compared to standard-sized ball bearings. They have distinct characteristics and are designed to meet the unique requirements of applications that demand compactness, precision, and efficient rotation in confined spaces. Here’s how miniature ball bearings differ from standard-sized ones and where they are commonly used:

  • Size:

The most noticeable difference is their size. Miniature ball bearings typically have outer diameters ranging from a few millimeters to around 30 millimeters, while standard-sized ball bearings have larger dimensions suitable for heavier loads and higher speeds.

  • Load Capacity:

Due to their smaller size, miniature ball bearings have lower load-carrying capacities compared to standard-sized bearings. They are designed for light to moderate loads and are often used in applications where precision and compactness are prioritized over heavy load support.

  • Precision:

Miniature ball bearings are known for their high precision and accuracy. They are manufactured to tighter tolerances, making them suitable for applications requiring precise motion control and low levels of vibration.

  • Speed:

Miniature ball bearings can achieve higher speeds than standard-sized bearings due to their smaller size and lower mass. This makes them ideal for applications involving high-speed rotation.

  • Friction and Efficiency:

Miniature ball bearings generally have lower friction due to their smaller contact area. This contributes to higher efficiency and reduced heat generation in applications that require smooth and efficient motion.

  • Applications:

Miniature ball bearings find applications in various industries and sectors:

  • Electronics and Consumer Devices:

They are used in small motors, computer disk drives, printers, and miniature fans, where space is limited but precise motion is essential.

  • Medical and Dental Equipment:

Miniature bearings are used in medical devices such as surgical instruments, dental handpieces, and diagnostic equipment due to their precision and compactness.

  • Robotics and Automation:

Miniature ball bearings are integral to robotic arms, miniature conveyors, and automation systems, enabling precise movement in confined spaces.

  • Aerospace and Defense:

They are used in applications like UAVs (drones), aerospace actuators, and satellite components where size and weight constraints are critical.

  • Optics and Instrumentation:

Miniature bearings play a role in optical instruments, cameras, and measuring devices, providing smooth rotation and accurate positioning.

Overall, miniature ball bearings are specialized components designed for applications where space, precision, and efficient rotation are paramount. Their compactness and high precision make them crucial in various industries requiring reliable motion control in limited spaces.

ball bearing

How does Lubrication Impact the Performance and Lifespan of Ball Bearings?

Lubrication plays a critical role in the performance and lifespan of ball bearings. Proper lubrication ensures smooth operation, reduces friction, minimizes wear, and prevents premature failure. Here’s how lubrication impacts ball bearings:

  • Friction Reduction:

Lubrication creates a thin film between the rolling elements (balls) and the raceways of the bearing. This film reduces friction by separating the surfaces and preventing direct metal-to-metal contact. Reduced friction results in lower energy consumption, heat generation, and wear.

  • Wear Prevention:

Lubricants create a protective barrier that prevents wear and damage to the bearing’s components. Without proper lubrication, the repeated rolling and sliding of the balls against the raceways would lead to accelerated wear, surface pitting, and eventual failure.

  • Heat Dissipation:

Lubricants help dissipate heat generated during operation. The rolling elements and raceways can generate heat due to friction. Adequate lubrication carries away this heat, preventing overheating and maintaining stable operating temperatures.

  • Corrosion Resistance:

Lubrication prevents moisture and contaminants from coming into direct contact with the bearing’s surfaces. This helps protect the bearing against corrosion, rust, and the formation of debris that can compromise its performance and longevity.

  • Noise Reduction:

Lubricated ball bearings operate quietly because the lubricant cushions and dampens vibrations caused by the rolling motion. This noise reduction is crucial in applications where noise levels need to be minimized.

  • Seal Protection:

Lubricants help maintain the effectiveness of seals or shields that protect the bearing from contaminants. They create a barrier that prevents particles from entering the bearing and causing damage.

  • Improved Efficiency:

Properly lubricated ball bearings operate with reduced friction, leading to improved overall efficiency. This is especially important in applications where energy efficiency is a priority.

  • Lifespan Extension:

Effective lubrication significantly extends the lifespan of ball bearings. Bearings that are properly lubricated experience less wear, reduced fatigue, and a lower likelihood of premature failure.

  • Selection of Lubricant:

Choosing the right lubricant is essential. Factors such as speed, temperature, load, and environmental conditions influence the choice of lubricant type and viscosity. Some common lubricant options include grease and oil-based lubricants.

  • Regular Maintenance:

Regular lubrication maintenance is crucial to ensure optimal bearing performance. Bearings should be inspected and relubricated according to manufacturer recommendations and based on the application’s operating conditions.

In summary, proper lubrication is essential for the optimal performance, longevity, and reliability of ball bearings. It reduces friction, prevents wear, dissipates heat, protects against corrosion, and contributes to smooth and efficient operation in various industrial and mechanical applications.

China Hot selling 6904 Auto Part Motorcycle Spare Part Wheel Bearing 6000 6200 6300 6400 6700 6800 6900 Zz 2RS Deep Groove Ball Bearing for Electrical Motor, Fan, Skateboard with Best SalesChina Hot selling 6904 Auto Part Motorcycle Spare Part Wheel Bearing 6000 6200 6300 6400 6700 6800 6900 Zz 2RS Deep Groove Ball Bearing for Electrical Motor, Fan, Skateboard with Best Sales
editor by CX 2024-02-05

China Hot selling 6300 Series Zz /2RS Deep Groove Ball Bearing for Motorcycle /Engine Bearings/Car Accessories bearing assembly

Product Description

     Deep groove ball bearing
 

Product Description

   Deep groove ball bearing consists of an outer ring, an inner ring, a group of steel balls and a group of cages. There are 2 types of deep groove ball bearings: single row and double row. Deep groove ball structure is also divided into seal and open structure. The open type means that the bearing has no sealing structure. The sealed deep groove ball is divided into dust-proof seal and oil-proof seal. 

<<Material>> The bearing is made of high-quality bearing steel, good durability, and resistance to heavy loads.
<<Features>> high level of hardness , Dimensional sablility,normal accuracy, less friction, higher speed  and low noise
<<Strictly Shielded>> Shields on both sides of the bearing help to keep dust out.

 

Basic Info.

          Trade Mark     Allout or DEM

Product Name

6300 series ZZ RS Deep Groove Ball Bearing 

Size

   10X35X11mm;  12X37X12mm; 15X42X13mm;   20X52X15mm;   25X62X17mm; 

Material

Stainless Steel ,Chrome Steel 

Precision

P0 P5 P6

Vibration  level   V4,V3,V2,V1

Sealing shiled 

opening ball bearing ,unopening ball bearing ,Z, ZZ ,RS,2RS,2RZ

Delivery date

Normally ready goods and stock within 3-15 days

Payment terms

A:100% TT
B: 30% T/T in advance .70% balance payment before shipment
C:Western union
D:PAYPAL

Application

Auto machinery , electric machinery  ,precision machinery ,home appliances ,customization options with drawings 

Package

standered package or Industrial package or customzied package

Details

Miniature Bearing
1, Robust seals for longer service life 
2, Maufacturing percison to meet high-standered requirements 
3, Widely used bearing type of machinery 

Special properties

1. High speed and High temperature rsistance 
2. Low noise
3. Low weight
4. Can be customized according to your  specific  needs or drawings 
5. Can provide small & miniature standard and non-standard ball bearings.
6.Factory wholesale with the best price

Product parameter

 

Bearing No.  I. D O. D W Loading Rating(KN) Steel Ball Parameter Max Speed
D D B Dynamic Static No.  Size Grease Oil
mm Inch mm Inch mm Inch Cr Cor mm R/min R/min
6300 10 0.3937 35 1.378 11 0.4331 8.2 3.5 6 7.144 23000 27000
6301 12 0.4724 37 1.4567 12 0.4724 9.7 4.2 6 7.938 20000 24000
6302 15 0.5906 42 1.6535 13 0.5118 11.4 5.45 7 7.938 17000 21000
6303 17 0.6693 47 1.8504 14 0.5512 13.5 6.55 7 8.731 16000 19000
6304 20 0.7874 52 2.571 15 0.5906 15.9 7.9 7 9.525 14000 27000
6305 25 0.9843 62 2.4409 17 0.6693 21.2 10.9 7 11.5 12000 14000
6306 30 1.1811 72 2.8346 19 0.748 26.7 15 8 12 10000 12000
6307 35 1.378 80 3.1496 21 0.8268 33.5 19.1 8 13.494 8800 10000
6308 40 1.5748 90 3.5433 23 0.9055 40.5 24 8 15.081 7800 9200
6309 45 1.7717 100 3.937 25 0.9843 53 32 8 17.462 7000 8200
6310 50 1.9685 110 4.3307 27 1.063 62 38.5 8 19.05 6400 7500
6311 55 2.1654 120 4.7244 29 1.1417 71.5 45 8 20.638 5800 6800
6312 60 2.3622 130 5.1181 31 1.2205 82 52 8 22.225 5400 6300
6313 65 2.5591 140 5.5118 33 1.2992 92.5 60 8 24 4900 5800
6314 70 2.7559 150 5.9055 35 1.378 104 68 8 25.4 4600 5400
6315 75 2.9528 160 6.2992 37 1.4567 113 77 8 26.988 4300 5000
6316 80 3.1496 170 6.6929 39 1.5354 123 86.5 8 28.575 4000  

4700

HangZhou Abico Bearing Co., Ltd Was Founded in 2018 and Integrates R&D, Manufacturing, Trading, Sales of Bearings, Rollers, Pulleys.

We have passed the ISO 9001: 2008, ISO 14001: 2004, CE, SGS with a factory Over 13, 000 Square Meters. We Are Specialized in Deep Groove Ball Bearings, Special Bearings.

We provide wide range of safety products such as class 0 deep groove ball bearings, stainless steel bearings, non-standard customized bearings and British R series. The main products cover 60,62, 63, 67, 68, 69 series, the annual output of more than 60 million sets of bearings. Products are widely used in household appliances, micro motors, power tools, motorcycles, automobiles, medical equipment, sports machinery and agricultural machinery and many other fields.We also accept the processing with customers’ drawings and samples.

Our products have been sold well in Europe, South America, Africa and Southeast Asia.On the basis of sincere-cooperation, equality and mutual benefit.We would like to establish long-term business relationship with customers all over the world.Good quality, competitive price, and satisfying service are our promises as a reliable trading partner.

 

Why Choose Us ?
1. Dry lube/ Grease/ Oil Related Products
2. Rubber seals/ ZZ metal shields
3. Customized option is available with your drawings 
4. High speed 
5. Long spin time
6. Low friction
7. Rustproof and corrosion resistance
8. Good wear stability 
9. Easy to maintance Related Products

FAQ

Q1: Are you a Manufacturer or trading company?
Answer: We are professional manufactuer of bearings since 1998 with ISO standards.

 

Q2: Can I get a sample to check out the quality?
Answer: Sure, free samples are available for stock products if you can pay for the shipping cost.
 

Q3: Do you accept small orders?

Answer:Standard size bearings are available ,but for non-Standard size bearings ,we have MOQ for your option.

 

Q4: Can you do OEM to print my logo/brand on the products?
Answer: Yes, we can print your logo/brand on the products, you just need to send us your logo/brand files, we will show you how it looks like.We can also make custom package to your request.

 

Q5: How soon can I expect my order to be finished?
Answer: We have regular stock for standard bearings that can be shipped right after your payment. It will take 15-60 days for new production order,which depends on your order quantity.

 

Q6: What if I receive defective products for my order?
Answer: All our bearings are 100% inspected strictly before packing. If any defective products received, please provide photos and video to show us the problem and help us improve the quality. New products will be sent to you as replacement if the probelm is product quality.

Q7.How to contact us if you have any questions?
Answer: Please feel free to send us an inquiry or any specific contact information, such as email address, account or account, we are looking forward to keeping you dated.
 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Virbration and Noise: Z2 Z3 Z4
Lubricant: Multemp SRL, Sbm
Aligning: Non-Aligning Bearing
Samples:
US$ 0.19/Piece
1 Piece(Min.Order)

|

Order Sample
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.





about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

ball bearing

What are the Challenges Associated with Noise Reduction in Ball Bearings?

Noise reduction in ball bearings is a crucial consideration, especially in applications where noise levels must be minimized for operational efficiency and user comfort. While ball bearings are designed to operate smoothly, there are several challenges associated with reducing noise in their operation:

  • Vibration:

Vibration generated by the movement of rolling elements and raceways can lead to noise. Even minor irregularities in bearing components or the mounting system can cause vibration that translates into audible noise.

  • Bearing Type and Design:

The type and design of the ball bearing can impact noise generation. For example, deep groove ball bearings are known for their quiet operation, while angular contact bearings can generate more noise due to their higher contact angles.

  • Lubrication:

Improper or inadequate lubrication can result in increased friction and wear, leading to noise. Choosing the right lubricant and maintaining proper lubrication levels are essential for reducing noise in ball bearings.

  • Bearing Clearance and Preload:

Incorrect clearance or preload settings can lead to noise issues. Excessive clearance or inadequate preload can cause the rolling elements to impact the raceways, resulting in noise during rotation.

  • Material and Manufacturing Quality:

The quality of materials and manufacturing processes can affect noise levels. Inconsistent or low-quality materials, improper heat treatment, or manufacturing defects can lead to noise generation during operation.

  • Surface Finish:

The surface finish of the rolling elements and raceways can impact noise. Rough surfaces can generate more noise due to increased friction and potential irregularities.

  • Sealing and Shielding:

Seals and shields that protect bearings can influence noise levels. While they are necessary for contamination prevention, they can also cause additional friction and generate noise.

  • Operating Conditions:

External factors such as temperature, speed, and load can influence noise levels. High speeds or heavy loads can amplify noise due to increased stress on the bearing components.

  • Wear and Deterioration:

As ball bearings wear over time, noise levels can increase. Worn components or inadequate lubrication can lead to more significant noise issues as the bearing operates.

To address these challenges and reduce noise in ball bearings, manufacturers and engineers employ various techniques, such as optimizing design, selecting suitable bearing types, using proper lubrication, maintaining accurate preload settings, and ensuring high-quality materials and manufacturing processes. Noise reduction efforts are essential to improve overall product quality, meet noise regulations, and enhance user experience in various applications.

ball bearing

How do Ceramic Ball Bearings Compare to Traditional Steel Ball Bearings in Terms of Performance?

Ceramic ball bearings and traditional steel ball bearings have distinct characteristics that can impact their performance in various applications. Here’s a comparison of how these two types of bearings differ in terms of performance:

  • Material Composition:

Ceramic Ball Bearings:

Ceramic ball bearings use ceramic rolling elements, typically made from materials like silicon nitride (Si3N4) or zirconium dioxide (ZrO2). These ceramics are known for their high hardness, low density, and resistance to corrosion and wear.

Traditional Steel Ball Bearings:

Traditional steel ball bearings use steel rolling elements. The type of steel used can vary, but common materials include chrome steel (52100) and stainless steel (440C). Steel bearings are known for their durability and strength.

  • Friction and Heat:

Ceramic Ball Bearings:

Ceramic bearings have lower friction coefficients compared to steel bearings. This results in reduced heat generation during operation, contributing to higher efficiency and potential energy savings.

Traditional Steel Ball Bearings:

Steel bearings can generate more heat due to higher friction coefficients. This can lead to increased energy consumption in applications where efficiency is crucial.

  • Weight:

Ceramic Ball Bearings:

Ceramic bearings are lighter than steel bearings due to the lower density of ceramics. This weight reduction can be advantageous in applications where minimizing weight is important.

Traditional Steel Ball Bearings:

Steel bearings are heavier than ceramic bearings due to the higher density of steel. This weight may not be as critical in all applications but could impact overall equipment weight and portability.

  • Corrosion Resistance:

Ceramic Ball Bearings:

Ceramic bearings have excellent corrosion resistance, making them suitable for applications in corrosive environments, such as marine or chemical industries.

Traditional Steel Ball Bearings:

Steel bearings are susceptible to corrosion, especially in harsh environments. Stainless steel variants offer improved corrosion resistance but may still corrode over time.

  • Speed and Precision:

Ceramic Ball Bearings:

Ceramic bearings can operate at higher speeds due to their lower friction and ability to withstand higher temperatures. They are also known for their high precision and low levels of thermal expansion.

Traditional Steel Ball Bearings:

Steel bearings can operate at high speeds as well, but their heat generation may limit performance in certain applications. Precision steel bearings are also available but may have slightly different characteristics compared to ceramics.

  • Cost:

Ceramic Ball Bearings:

Ceramic bearings are generally more expensive to manufacture than steel bearings due to the cost of ceramic materials and the challenges in producing precision ceramic components.

Traditional Steel Ball Bearings:

Steel bearings are often more cost-effective to manufacture, making them a more economical choice for many applications.

In conclusion, ceramic ball bearings and traditional steel ball bearings offer different performance characteristics. Ceramic bearings excel in terms of low friction, heat generation, corrosion resistance, and weight reduction. Steel bearings are durable, cost-effective, and widely used in various applications. The choice between the two depends on the specific requirements of the application, such as speed, precision, corrosion resistance, and budget considerations.

ball bearing

What Factors should be Considered when Selecting a Ball Bearing for a Particular Application?

Selecting the right ball bearing for a specific application involves careful consideration of various factors to ensure optimal performance, longevity, and reliability. Here are the key factors that should be taken into account:

  • Load Type and Magnitude:

Determine the type of load (radial, axial, or combined) and the magnitude of the load that the bearing will need to support. Choose a bearing with the appropriate load-carrying capacity to ensure reliable operation.

  • Speed and Operating Conditions:

Consider the rotational speed of the application and the operating conditions, such as temperature, humidity, and exposure to contaminants. Different bearing types and materials are suited for varying speeds and environments.

  • Accuracy and Precision:

For applications requiring high accuracy and precision, such as machine tool spindles or optical instruments, choose high-precision bearings that can maintain tight tolerances and minimize runout.

  • Space Limitations:

If the application has limited space, choose miniature or compact ball bearings that can fit within the available dimensions without compromising performance.

  • Thrust and Radial Loads:

Determine whether the application requires predominantly thrust or radial load support. Choose the appropriate type of ball bearing (thrust, radial, or angular contact) based on the primary load direction.

  • Alignment and Misalignment:

If the application experiences misalignment between the shaft and housing, consider self-aligning ball bearings that can accommodate angular misalignment.

  • Mounting and Installation:

Consider the ease of mounting and dismounting the bearing. Some applications may benefit from features like flanges or snap rings for secure installation.

  • Lubrication and Maintenance:

Choose a bearing with appropriate lubrication options based on the application’s speed and temperature range. Consider whether seals or shields are necessary to protect the bearing from contaminants.

  • Environmental Conditions:

Factor in the operating environment, including exposure to corrosive substances, chemicals, water, or dust. Choose materials and coatings that can withstand the specific environmental challenges.

  • Bearing Material:

Select a bearing material that suits the application’s requirements. Common materials include stainless steel for corrosion resistance and high-carbon chrome steel for general applications.

  • Bearing Arrangement:

Consider whether a single-row, double-row, or multiple bearings in a specific arrangement are needed to accommodate the loads and moments present in the application.

By carefully evaluating these factors, engineers and designers can choose the most suitable ball bearing that aligns with the specific demands of the application, ensuring optimal performance, durability, and overall operational efficiency.

China Hot selling 6300 Series Zz /2RS Deep Groove Ball Bearing for Motorcycle /Engine Bearings/Car Accessories bearing assemblyChina Hot selling 6300 Series Zz /2RS Deep Groove Ball Bearing for Motorcycle /Engine Bearings/Car Accessories bearing assembly
editor by CX 2024-02-04

China factory CZPT CZPT CZPT CZPT CZPT CZPT 6206 6207 6208 6209 6210 6211 6212 6213 6214 6215 6216 6217 6218 6219 6220 Deep Groove Ball Bearing Branded Bearings bearing assembly

Product Description

CZPT CZPT CZPT CZPT CZPT CZPT Deep Groove Ball Bearing Branded Bearings
Simply Bearings supplies a wide range of bearings designed for particular applications. Ball bearings  bearing ball bearings thrust bearing roller bearing needle bearing pillow block bearings linear bearings linear bearings are the simplest and most common type of bearing. These linear bearings, bearing types  bearings can handle both thrust and radial loads but are limited as to the weight of the load itself. If overloaded,bearing taper roller bearing needle roller bearings they can deform.

Deep groove ball bearings can support moderate radial loads and moderate axial loads (parallel to the shaft). They can operate at high speeds. Ball bearings with shields or seals for protection are usually lubricated to last for the operating lifeMiniature & Instrument Series, Stainless Steel – Inch and MetricOpen, Shielded, Shielded and Modified Dimension Bearings: Inch MetricSingle Row Deep Groove6000, 6200 and 6300 Series: Open, Shielded, Sealed – Metric
Main purposes:
Automotive: rear wheel, transmission, electrical equipment components
Electric: General Motors, Household Appliances
Other: instruments, internal combustion engines, construction machinery, railway vehicles, handling machinery, agricultural machinery, all kinds of industrial machiner

Product Bearing Type Bore Dia (d) (mm) Outer Dia (D) (mm) Width (B) (mm) Radius (min) (rs) (mm) Dynamic Load Rating (Cr) (N) Static Load Rating (Cor) (N)
6002 Open 15 32 9 0.3 5600 2850
6002-2RS Sealed 15 32 9 0.3 5600 2850
6002ZZ Shielded 15 32 9 0.3 8100 3450
6202 Open 15 35 11 0.6 7650 3750
6202-2RS Sealed 15 35 11 0.6 7650 3750
6202ZZ Shielded 15 35 11 0.6 7650 3750
6302 Open 15 42 13 1 11400 5450
6302-2RS Sealed 15 42 13 1 11400 5450
6302ZZ Shielded 15 42 13 1 11400 5450
6003 Open 17 35 10 0.3 6000 3250
6003-2RS Sealed 17 35 10 0.3 6000 3250
6003ZZ Shielded 17 35 10 0.3 6000 3250
6203 Open 17 40 12 0.6 9550 4800
6203-2RS Sealed 17 40 12 0.6 9550 4800
6203ZZ Shielded 17 40 12 0.6 9550 4800
6303 Open 17 47 14 1 13600 6650
6303-2RS Sealed 17 47 14 1 13600 6650
6303ZZ Shielded 17 47 14 1 13600 6650

Related Products
Company Introduction
Great Bearing Co., Ltd.  is a professional manufacturer engaged in the research, development, production, sale and service of Cylindrical roller bearing, tapered roller bearing, deep groove ball bearing, Spherical roller bearing etc.

Our factory is located in HangZhou city of the biggest bearing market area in China. Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction. In recent years, our company has introduced a series of advanced equipment including double-end face grinding machine etc., flaw detector…In addition, we have obtained ISO9001: 2008 certificates. Selling well in all cities and provinces around China, our products are also exported to clients in such countries and regions as Europe, America, Middle East, Africa and Southeast Asian.

We also welcome OEM and ODM orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements.

Certificates

Our advantages

FAQ:
Q: Are you trading company or manufacturer ?
A: We are factory and trading company. Our factory sell market is in china with our brand GREAT.
Q: How long is your delivery time?
A: We have enough stock for roller bearings and ball bearings. Delivery time within 7 days.  15-25 days for 1 container to OEM brand following your request
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge ,please you pay the cost of freight.
Q: What is your payment term?
A: We accept 30% TT advance ,70% balance against the bill lading copy. Also 100% IRR L/C ok.
  
 Packaging & Shipping

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Separated: Unseparated
Rows Number: Single
Material: Stainless Steel
Application: Machinery
Feature: Long Life
Service: OEM ODM
Samples:
US$ 0.5/Set
1 Set(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

ball bearing

How does Preload Affect the Performance and Efficiency of Ball Bearings?

Preload is a crucial factor in ball bearing design that significantly impacts the performance, efficiency, and overall behavior of the bearings in various applications. Preload refers to the intentional axial force applied to the bearing’s rolling elements before it is mounted. This force eliminates internal clearance and creates contact between the rolling elements and the raceways. Here’s how preload affects ball bearing performance:

  • Reduction of Internal Clearance:

Applying preload reduces the internal clearance between the rolling elements and the raceways. This eliminates play within the bearing, ensuring that the rolling elements are in constant contact with the raceways. This reduced internal clearance enhances precision and reduces vibrations during operation.

  • Increased Stiffness:

Preloaded bearings are stiffer due to the elimination of internal clearance. This increased stiffness improves the bearing’s ability to handle axial and radial loads with higher accuracy and minimal deflection.

  • Minimized Axial Play:

Preload minimizes or eliminates axial play within the bearing. This is especially important in applications where axial movement needs to be minimized, such as machine tool spindles and precision instruments.

  • Enhanced Rigidity:

The stiffness resulting from preload enhances the bearing’s rigidity, making it less susceptible to deformation under load. This is critical for maintaining precision and accuracy in applications that require minimal deflection.

  • Reduction in Ball Slippage:

Preload reduces the likelihood of ball slippage within the bearing, ensuring consistent contact between the rolling elements and the raceways. This leads to improved efficiency and better load distribution.

  • Improved Running Accuracy:

Preloading enhances the running accuracy of the bearing, ensuring that it maintains precise rotational characteristics even under varying loads and speeds. This is essential for applications requiring high accuracy and repeatability.

  • Optimized Performance at High Speeds:

Preload helps prevent skidding and slipping of the rolling elements during high-speed operation. This ensures that the bearing remains stable, reducing the risk of noise, vibration, and premature wear.

  • Impact on Friction and Heat Generation:

While preload reduces internal clearance and friction, excessive preload can lead to higher friction and increased heat generation. A balance must be struck between optimal preload and minimizing friction-related issues.

  • Application-Specific Considerations:

The appropriate amount of preload depends on the application’s requirements, such as load, speed, accuracy, and operating conditions. Over-preloading can lead to increased stress and premature bearing failure, while under-preloading may result in inadequate rigidity and reduced performance.

Overall, preload plays a critical role in optimizing the performance, accuracy, and efficiency of ball bearings. Engineers must carefully determine the right preload level for their specific applications to achieve the desired performance characteristics and avoid potential issues related to overloading or inadequate rigidity.

ball bearing

How do Ceramic Ball Bearings Compare to Traditional Steel Ball Bearings in Terms of Performance?

Ceramic ball bearings and traditional steel ball bearings have distinct characteristics that can impact their performance in various applications. Here’s a comparison of how these two types of bearings differ in terms of performance:

  • Material Composition:

Ceramic Ball Bearings:

Ceramic ball bearings use ceramic rolling elements, typically made from materials like silicon nitride (Si3N4) or zirconium dioxide (ZrO2). These ceramics are known for their high hardness, low density, and resistance to corrosion and wear.

Traditional Steel Ball Bearings:

Traditional steel ball bearings use steel rolling elements. The type of steel used can vary, but common materials include chrome steel (52100) and stainless steel (440C). Steel bearings are known for their durability and strength.

  • Friction and Heat:

Ceramic Ball Bearings:

Ceramic bearings have lower friction coefficients compared to steel bearings. This results in reduced heat generation during operation, contributing to higher efficiency and potential energy savings.

Traditional Steel Ball Bearings:

Steel bearings can generate more heat due to higher friction coefficients. This can lead to increased energy consumption in applications where efficiency is crucial.

  • Weight:

Ceramic Ball Bearings:

Ceramic bearings are lighter than steel bearings due to the lower density of ceramics. This weight reduction can be advantageous in applications where minimizing weight is important.

Traditional Steel Ball Bearings:

Steel bearings are heavier than ceramic bearings due to the higher density of steel. This weight may not be as critical in all applications but could impact overall equipment weight and portability.

  • Corrosion Resistance:

Ceramic Ball Bearings:

Ceramic bearings have excellent corrosion resistance, making them suitable for applications in corrosive environments, such as marine or chemical industries.

Traditional Steel Ball Bearings:

Steel bearings are susceptible to corrosion, especially in harsh environments. Stainless steel variants offer improved corrosion resistance but may still corrode over time.

  • Speed and Precision:

Ceramic Ball Bearings:

Ceramic bearings can operate at higher speeds due to their lower friction and ability to withstand higher temperatures. They are also known for their high precision and low levels of thermal expansion.

Traditional Steel Ball Bearings:

Steel bearings can operate at high speeds as well, but their heat generation may limit performance in certain applications. Precision steel bearings are also available but may have slightly different characteristics compared to ceramics.

  • Cost:

Ceramic Ball Bearings:

Ceramic bearings are generally more expensive to manufacture than steel bearings due to the cost of ceramic materials and the challenges in producing precision ceramic components.

Traditional Steel Ball Bearings:

Steel bearings are often more cost-effective to manufacture, making them a more economical choice for many applications.

In conclusion, ceramic ball bearings and traditional steel ball bearings offer different performance characteristics. Ceramic bearings excel in terms of low friction, heat generation, corrosion resistance, and weight reduction. Steel bearings are durable, cost-effective, and widely used in various applications. The choice between the two depends on the specific requirements of the application, such as speed, precision, corrosion resistance, and budget considerations.

ball bearing

What are the Different Components that Make up a Typical Ball Bearing?

A typical ball bearing consists of several essential components that work together to reduce friction and support loads. Here are the main components that make up a ball bearing:

  • Outer Ring:

The outer ring is the stationary part of the bearing that provides support and houses the other components. It contains raceways (grooves) that guide the balls’ movement.

  • Inner Ring:

The inner ring is the rotating part of the bearing that attaches to the shaft. It also contains raceways that correspond to those on the outer ring, allowing the balls to roll smoothly.

  • Balls:

The spherical balls are the rolling elements that reduce friction between the inner and outer rings. Their smooth rolling motion enables efficient movement and load distribution.

  • Cage or Retainer:

The cage, also known as the retainer, maintains a consistent spacing between the balls. It prevents the balls from touching each other, reducing friction and preventing jamming.

  • Seals and Shields:

Many ball bearings include seals or shields to protect the internal components from contaminants and retain lubrication. Seals provide better protection against contaminants, while shields offer less resistance to rotation.

  • Lubricant:

Lubrication is essential to reduce friction, wear, and heat generation. Bearings are typically filled with lubricants that ensure smooth movement between the balls and raceways.

  • Flanges and Snap Rings:

In some designs, flanges or snap rings are added to help position and secure the bearing in its housing or on the shaft. Flanges prevent axial movement, while snap rings secure the bearing radially.

  • Raceways:

Raceways are the grooved tracks on the inner and outer rings where the balls roll. The shape and design of the raceways influence the bearing’s load-carrying capacity and performance.

  • Anti-Friction Shield:

In certain high-speed applications, a thin anti-friction shield can be placed between the inner and outer rings to minimize friction and heat generation.

These components work together to enable the smooth rolling motion, load support, and reduced friction that characterize ball bearings. The proper design and assembly of these components ensure the bearing’s optimal performance and longevity in various applications.

China factory CZPT CZPT CZPT CZPT CZPT CZPT 6206 6207 6208 6209 6210 6211 6212 6213 6214 6215 6216 6217 6218 6219 6220 Deep Groove Ball Bearing Branded Bearings bearing assemblyChina factory CZPT CZPT CZPT CZPT CZPT CZPT 6206 6207 6208 6209 6210 6211 6212 6213 6214 6215 6216 6217 6218 6219 6220 Deep Groove Ball Bearing Branded Bearings bearing assembly
editor by CX 2024-02-04

China OEM 6201 Auto Part Motorcycle Spare Part Wheel Bearing 6000 6200 6300 6400 6700 6800 6900 Zz 2RS Deep Groove Ball Bearing for Electrical Motor, Fan, Skateboard wheel bearing

Product Description

 

Product Description

Basic Info.
 

Model NO. 6201 Inner Diameter 12mm
Load Direction Radial Bearing Outer Diameter 32mm
Bearings Type Ball Bearing/Roller Bearing/Auto Bearing Rows Number Single
Feature Long Life, High Speed, Low Noise Material Gcr15, Chrome Steel, Stainless Steel, Carbon Steel
Precision P0 P6 P5 P4 P2 Application Machinery Electric Accessories, Auto Spare Parts
Vibration Z1V1, Z2V2, Z3V3; Z4V4 Cage Steel Cage.Copper Cage.Nylon Cage
Lubrication Grease/Oil Seals Type Open/Zz/2RS
MOQ 2PCS Clearance C0 /C2/C3
Stock Rich Stocks Samples Available
Transport by Sea or by Air  Transport Package Box,Carton,Wooden Box,Plastic Tube or Per buyers requirement
Specification 12×32×10mm Trademark Allout, OEM, Neutral
Origin HangZhou,ZHangZhoug, China HS Code 8482157100
Production Capacity 200000/Month Warranty One Year

Product Description
Auto Part motorcycle spare part wheel bearing 6402 Zz 2RS Deep Groove Ball Bearing for Electrical Motor, fan,skateboard

General information of Allout deep groove ball bearing

Allout deep groove ball bearing consists of an outer ring, an inner ring, a group of steel balls and a group of cages. Deep groove ball structure is also divided into seal and open structure. The open type means that the bearing has no sealing structure. The sealed deep groove ball is divided into dust-proof seal and oil-proof seal. The dust-proof seal cover is made of steel plate, which only serves as a simple way to prevent dust from entering the bearing raceway. The oil-proof type is a contact oil seal, which can effectively prevent grease overflow in the bearing.
 

Technical parameter of Allout deep groove ball bearing
 

Model NO. Inner Diameter
(mm)		 outer
Diameter
(mm)		 Width/height Basic Load Rating(N) Limiting speed(rpm) Weight 
B C Cr Cor Grease Oil kg
623 3 10 4 4 640 220 50000 60000 0.0016
624 4 13 5 5 1150 400 40000 48000 0.003
625 5 16 5 5 1880 680 36000 43000 0.0048
626 6 19 6 6 2800 1060 32000 40000 0.008
627 7 22 7 7 3290 1360 30000 36000 0.014
628 8 24 8 8 3330 1410 28000 34000 0.016
629 9 26 8 8 4160 1780 28000 34000 0.019
6200 10 30 9 9 5110 2380 25000 30000 0.032
6201 12 32 10 10 6180 3060 22000 26000 0.037
6202 15 35 11 11 7450 3700 19000 23000 0.045
6203 17 40 12 12 9560 4780 18000 21000 0.066
6204 20 47 14 14 12840 6650 15000 18000 0.106
6205 25 52 15 15 14571 7930 14000 17000 0.128
6206 30 62 16 16 19460 11310 11000 14000 0.199
6207 35 72 17 17 25670 15300 9500 12000 0.288
6208 40 80 18 18 29520 18140 8500 1000 0.366
6209 45 85 19 19 32500 20400 8000 9500 0.398
6210 50 90 20 20 35000 23200 7500 9000 0.454
6211 55 100 21 21 43500 29200 6700 8000 0.601

Our Advantages

 

Packaging & Shipping

 

Company Profile

HangZhou Abico Bearing Co., Ltd Was Founded in 2018 and Integrates R&D, Manufacturing, Trading, Sales of Bearings, Rollers, Pulleys.

We have passed the ISO 9001: 2008, ISO 14001: 2004, CE, SGS with a factory Over 13, 000 Square Meters. We Are Specialized in Deep Groove Ball Bearings, Special Bearings.

We provide wide range of safety products such as class 0 deep groove ball bearings, stainless steel bearings, non-standard customized bearings and British R series. The main products cover 60,62, 63, 67, 68, 69 series, the annual output of more than 60 million sets of bearings. Products are widely used in household appliances, micro motors, power tools, motorcycles, automobiles, medical equipment, sports machinery and agricultural machinery and many other fields.We also accept the processing with customers’ drawings and samples.

Our products have been sold well in Europe, South America, Africa and Southeast Asia.On the basis of sincere-cooperation, equality and mutual benefit.We would like to establish long-term business relationship with customers all over the world.Good quality, competitive price, and satisfying service are our promises as a reliable trading partner.
 

 

FAQ

 

Q1: Are you a Manufacturer or trading company?
Answer: We are professional manufactuer of bearings since 1998 with ISO standards.

 

Q2: Can I get a sample to check out the quality?
Answer: Sure, free samples are available for stock products if you can pay for the shipping cost.

 

Q3: Can you do OEM to print my logo/brand on the products?
Answer: Yes, we can print your logo/brand on the products, you just need to send us your logo/brand files, we will show you how it looks like.We can also make custom package to your request.

 

Q4: How soon can I expect my order to be finished?
Answer: We have regular stock for standard bearings that can be shipped right after your payment. It will take 15-60 days for new production order,which depends on your order quantity.

 

Q5: What if I receive defective products for my order?
Answer: All our bearings are 100% inspected strictly before packing. If any defective products received, please provide photos and video to show us the problem and help us improve the quality. New products will be sent to you as replacement if the probelm is product quality.

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Field: Conveyor, Diesel Hydraulic, Pump, Car Accessories
Application: Pump, Motorcycle, Washing Machine, Car
Inner Diameter: 12
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.





about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

ball bearing

How does Preload Affect the Performance and Efficiency of Ball Bearings?

Preload is a crucial factor in ball bearing design that significantly impacts the performance, efficiency, and overall behavior of the bearings in various applications. Preload refers to the intentional axial force applied to the bearing’s rolling elements before it is mounted. This force eliminates internal clearance and creates contact between the rolling elements and the raceways. Here’s how preload affects ball bearing performance:

  • Reduction of Internal Clearance:

Applying preload reduces the internal clearance between the rolling elements and the raceways. This eliminates play within the bearing, ensuring that the rolling elements are in constant contact with the raceways. This reduced internal clearance enhances precision and reduces vibrations during operation.

  • Increased Stiffness:

Preloaded bearings are stiffer due to the elimination of internal clearance. This increased stiffness improves the bearing’s ability to handle axial and radial loads with higher accuracy and minimal deflection.

  • Minimized Axial Play:

Preload minimizes or eliminates axial play within the bearing. This is especially important in applications where axial movement needs to be minimized, such as machine tool spindles and precision instruments.

  • Enhanced Rigidity:

The stiffness resulting from preload enhances the bearing’s rigidity, making it less susceptible to deformation under load. This is critical for maintaining precision and accuracy in applications that require minimal deflection.

  • Reduction in Ball Slippage:

Preload reduces the likelihood of ball slippage within the bearing, ensuring consistent contact between the rolling elements and the raceways. This leads to improved efficiency and better load distribution.

  • Improved Running Accuracy:

Preloading enhances the running accuracy of the bearing, ensuring that it maintains precise rotational characteristics even under varying loads and speeds. This is essential for applications requiring high accuracy and repeatability.

  • Optimized Performance at High Speeds:

Preload helps prevent skidding and slipping of the rolling elements during high-speed operation. This ensures that the bearing remains stable, reducing the risk of noise, vibration, and premature wear.

  • Impact on Friction and Heat Generation:

While preload reduces internal clearance and friction, excessive preload can lead to higher friction and increased heat generation. A balance must be struck between optimal preload and minimizing friction-related issues.

  • Application-Specific Considerations:

The appropriate amount of preload depends on the application’s requirements, such as load, speed, accuracy, and operating conditions. Over-preloading can lead to increased stress and premature bearing failure, while under-preloading may result in inadequate rigidity and reduced performance.

Overall, preload plays a critical role in optimizing the performance, accuracy, and efficiency of ball bearings. Engineers must carefully determine the right preload level for their specific applications to achieve the desired performance characteristics and avoid potential issues related to overloading or inadequate rigidity.

ball bearing

How do Miniature Ball Bearings Differ from Standard-sized Ones, and Where are They Commonly Used?

Miniature ball bearings, as the name suggests, are smaller in size compared to standard-sized ball bearings. They have distinct characteristics and are designed to meet the unique requirements of applications that demand compactness, precision, and efficient rotation in confined spaces. Here’s how miniature ball bearings differ from standard-sized ones and where they are commonly used:

  • Size:

The most noticeable difference is their size. Miniature ball bearings typically have outer diameters ranging from a few millimeters to around 30 millimeters, while standard-sized ball bearings have larger dimensions suitable for heavier loads and higher speeds.

  • Load Capacity:

Due to their smaller size, miniature ball bearings have lower load-carrying capacities compared to standard-sized bearings. They are designed for light to moderate loads and are often used in applications where precision and compactness are prioritized over heavy load support.

  • Precision:

Miniature ball bearings are known for their high precision and accuracy. They are manufactured to tighter tolerances, making them suitable for applications requiring precise motion control and low levels of vibration.

  • Speed:

Miniature ball bearings can achieve higher speeds than standard-sized bearings due to their smaller size and lower mass. This makes them ideal for applications involving high-speed rotation.

  • Friction and Efficiency:

Miniature ball bearings generally have lower friction due to their smaller contact area. This contributes to higher efficiency and reduced heat generation in applications that require smooth and efficient motion.

  • Applications:

Miniature ball bearings find applications in various industries and sectors:

  • Electronics and Consumer Devices:

They are used in small motors, computer disk drives, printers, and miniature fans, where space is limited but precise motion is essential.

  • Medical and Dental Equipment:

Miniature bearings are used in medical devices such as surgical instruments, dental handpieces, and diagnostic equipment due to their precision and compactness.

  • Robotics and Automation:

Miniature ball bearings are integral to robotic arms, miniature conveyors, and automation systems, enabling precise movement in confined spaces.

  • Aerospace and Defense:

They are used in applications like UAVs (drones), aerospace actuators, and satellite components where size and weight constraints are critical.

  • Optics and Instrumentation:

Miniature bearings play a role in optical instruments, cameras, and measuring devices, providing smooth rotation and accurate positioning.

Overall, miniature ball bearings are specialized components designed for applications where space, precision, and efficient rotation are paramount. Their compactness and high precision make them crucial in various industries requiring reliable motion control in limited spaces.

ball bearing

How does Lubrication Impact the Performance and Lifespan of Ball Bearings?

Lubrication plays a critical role in the performance and lifespan of ball bearings. Proper lubrication ensures smooth operation, reduces friction, minimizes wear, and prevents premature failure. Here’s how lubrication impacts ball bearings:

  • Friction Reduction:

Lubrication creates a thin film between the rolling elements (balls) and the raceways of the bearing. This film reduces friction by separating the surfaces and preventing direct metal-to-metal contact. Reduced friction results in lower energy consumption, heat generation, and wear.

  • Wear Prevention:

Lubricants create a protective barrier that prevents wear and damage to the bearing’s components. Without proper lubrication, the repeated rolling and sliding of the balls against the raceways would lead to accelerated wear, surface pitting, and eventual failure.

  • Heat Dissipation:

Lubricants help dissipate heat generated during operation. The rolling elements and raceways can generate heat due to friction. Adequate lubrication carries away this heat, preventing overheating and maintaining stable operating temperatures.

  • Corrosion Resistance:

Lubrication prevents moisture and contaminants from coming into direct contact with the bearing’s surfaces. This helps protect the bearing against corrosion, rust, and the formation of debris that can compromise its performance and longevity.

  • Noise Reduction:

Lubricated ball bearings operate quietly because the lubricant cushions and dampens vibrations caused by the rolling motion. This noise reduction is crucial in applications where noise levels need to be minimized.

  • Seal Protection:

Lubricants help maintain the effectiveness of seals or shields that protect the bearing from contaminants. They create a barrier that prevents particles from entering the bearing and causing damage.

  • Improved Efficiency:

Properly lubricated ball bearings operate with reduced friction, leading to improved overall efficiency. This is especially important in applications where energy efficiency is a priority.

  • Lifespan Extension:

Effective lubrication significantly extends the lifespan of ball bearings. Bearings that are properly lubricated experience less wear, reduced fatigue, and a lower likelihood of premature failure.

  • Selection of Lubricant:

Choosing the right lubricant is essential. Factors such as speed, temperature, load, and environmental conditions influence the choice of lubricant type and viscosity. Some common lubricant options include grease and oil-based lubricants.

  • Regular Maintenance:

Regular lubrication maintenance is crucial to ensure optimal bearing performance. Bearings should be inspected and relubricated according to manufacturer recommendations and based on the application’s operating conditions.

In summary, proper lubrication is essential for the optimal performance, longevity, and reliability of ball bearings. It reduces friction, prevents wear, dissipates heat, protects against corrosion, and contributes to smooth and efficient operation in various industrial and mechanical applications.

China OEM 6201 Auto Part Motorcycle Spare Part Wheel Bearing 6000 6200 6300 6400 6700 6800 6900 Zz 2RS Deep Groove Ball Bearing for Electrical Motor, Fan, Skateboard wheel bearingChina OEM 6201 Auto Part Motorcycle Spare Part Wheel Bearing 6000 6200 6300 6400 6700 6800 6900 Zz 2RS Deep Groove Ball Bearing for Electrical Motor, Fan, Skateboard wheel bearing
editor by CX 2024-02-04