Product Description
Product Description
6200 series deep groove ball bearings
other series: product-list-1.html
| Bearing NO | (mm)Boundary Dimensions | (Kn) | (Kn) | (r/min)Limit Rotational Speed | (Kg) Weight |
|||
| d | D | B | Dynamic Load Rating Cr |
Static Load Rating Cor |
Grease Lubrication | Oil Lubrication | ||
| 6200 | 10 | 30 | 9 | 5.11 | 2.39 | 24000 | 30000 | 0.032 |
| 6201 | 12 | 32 | 10 | 6.82 | 3.06 | 22000 | 28000 | 0.035 |
| 6202 | 15 | 35 | 11 | 7.64 | 3.72 | 20000 | 24000 | 0.045 |
| 6203 | 17 | 40 | 12 | 9.57 | 4.79 | 17000 | 20000 | 0.064 |
| 6204 | 20 | 47 | 14 | 12.84 | 6.65 | 15000 | 18000 | 0.103 |
| 6205 | 25 | 52 | 15 | 14.02 | 7.88 | 13000 | 15000 | 0.127 |
| 6206 | 30 | 62 | 16 | 19.46 | 11.31 | 11000 | 13000 | 0.202 |
| 6207 | 35 | 72 | 17 | 25.67 | 15.30 | 9500 | 11000 | 0.287 |
| 6208 | 40 | 80 | 18 | 29.52 | 18.14 | 8500 | 10000 | 0.367 |
| 6209 | 45 | 85 | 19 | 32.67 | 20.68 | 7500 | 9000 | 0.416 |
| 6210 | 50 | 90 | 20 | 35.07 | 23.18 | 7100 | 8500 | 0.462 |
| 6211 | 55 | 100 | 21 | 43.50 | 29.20 | 6300 | 7500 | 0.602 |
| 6212 | 60 | 110 | 22 | 52.50 | 36.00 | 5600 | 7100 | 0.789 |
| 6213 | 65 | 120 | 23 | 58.50 | 40.50 | 5300 | 6300 | 0.990 |
| 6214 | 70 | 125 | 24 | 63.70 | 45.00 | 5000 | 6300 | 1.100 |
| 6215 | 75 | 130 | 25 | 68.90 | 49.00 | 4800 | 5600 | 1.200 |
| 6216 | 80 | 140 | 26 | 72.50 | 53.00 | 4500 | 5300 | 1.400 |
| 6217 | 85 | 150 | 28 | 83.20 | 63.80 | 4300 | 5000 | 1.750 |
| 6218 | 90 | 160 | 30 | 95.80 | 71.50 | 4000 | 4800 | 2.200 |
| 6219 | 95 | 170 | 32 | 110.0 | 82.80 | 3800 | 4500 | 2.620 |
| 6220 | 100 | 180 | 34 | 122.0 | 92.80 | 3600 | 4300 | 3.200 |
| 6221 | 105 | 190 | 36 | 133.0 | 105.0 | 3400 | 4000 | – |
| 6222 | 110 | 200 | 38 | 144.0 | 117.0 | 2800 | 3400 | – |
| 6224 | 120 | 215 | 40 | 155.0 | 131.0 | 2600 | 3200 | – |
Detailed Photos
Black chamfer with rubber seal
Black chamfer with white dust cover
open UG
white chamfer with yellow dust cover
ceramic ball bearing
THE USE OF THE BEARING
Some tips on use
Rolling bearing is a precise part. Therefore it should be used carefully. No matter how high performance the bearing has, it can be obtained by improper use, the followings are the points for attention to use bearings.
(1) Keep clean the bearing and its surrounding areas
It is harmful to the bearing even by tiny dust which can not be seen by human eyes. Therefore it should always keep clean the surrounding environments in order to prevent the bearing from dust corrosion.
(2) Use bearing carefully
Scar and indentation can essily be produced out of strong impact to the bearing in use and become the cause of accidents. Therefore special caution should be given to its use.
(3) Use the appropriate operating tool
Avoid using a hammer or heavy direct tap on a bearing or sleeve, must use appropriate tools such as press or heating.
(4) Be careful to the rust corrosion of the bearings
The sweat in the hands will cause rust in operating the bearings. Therefore your hands should be cleanly washed and dried before operation. You’d better wear gloves in doing the work.
(5) Handler should familiar with bearing
(6) Establish bearing handling criteri
·Bearing storage
.Bearing and surrounding cleaning
.Dimension of mounting parts and inspection
.Machining quality
.Mounting handing
.After mounting inspection
·Disassembly handing
·Keep maintain
·Adding lubricant
Installation Instructions
Bearing mounting
Precautions for proper mounting of bearing
1) Bearing preparation
Bearing should not be unpacked until before mounting due to spray anti-corrosion oil and pack anti-corrosion paper. In addition, spray anti-corrosion oil on bearing have good lubricate function. For general purpose, just directly using bearing fill-in grease bearings, without cleaning. However, bearing for instrument or high speed rotating must be cleaned with clean filtered oil in order to remove the anti-corrosion oil. At that time, the bearings are easy to corrosion could not storage long term.
2) Inspection of shafts and housings
Cleaning shaft and housing, confirming no scratched or machine burrs, no CZPT and cutting piece in housing. Secondly comppare with drawing, the shaft and housing of dimension, form and machining quality should be inspected.
chart 1 Measure location for shaft diameter chart 2 Measure location for housing bore diameter
As chart 1 and chart 2 showing, divided several locations to be measure on shaft and housing bore diameters, It should be careful inspected perpendicular between shaft, housing fillet dimension and shoulder.
Before mounting bearing, it should be sprayed mechanical oil on fitting surface after check out the shaft and housing.
Bearing storage
Before leaving the factory, the bearing is sprayed proper rust-inhibiting oil and packed rust-inhibiting paper. The quality of bearing is guaranteed, if the packing is not broken.
For long-term storage, if the humidity less than 65% and the temperature about 20, it should storage on shelf which is higher 30cm than ground.
In addition, storage occasion should avoid sunshine and contact with cold wall.
Pictures about packaging
Company Profile
Our Advantages
1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.
SAMPLES
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to
pay samples charge and shipping cost.
3. It’s better to start your order with Trade Assurance to get full protection for your samples order.
CUSTOMIZED
The customized LOGO or drawing is acceptable for us.
MOQ
1. MOQ: 10 PCS standard bearings.
2. MOQ: 1000 PCS customized your brand bearings.
OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield.
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Motor Parts: | Motor Bearing |
|---|---|
| Water Pump Parts: | Water Pump Bearing |
| Air Compressor Parts: | Air Compressor Bearing |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | Order Sample black or white or as required
|
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What are the Challenges Associated with Noise Reduction in Ball Bearings?
Noise reduction in ball bearings is a crucial consideration, especially in applications where noise levels must be minimized for operational efficiency and user comfort. While ball bearings are designed to operate smoothly, there are several challenges associated with reducing noise in their operation:
- Vibration:
Vibration generated by the movement of rolling elements and raceways can lead to noise. Even minor irregularities in bearing components or the mounting system can cause vibration that translates into audible noise.
- Bearing Type and Design:
The type and design of the ball bearing can impact noise generation. For example, deep groove ball bearings are known for their quiet operation, while angular contact bearings can generate more noise due to their higher contact angles.
- Lubrication:
Improper or inadequate lubrication can result in increased friction and wear, leading to noise. Choosing the right lubricant and maintaining proper lubrication levels are essential for reducing noise in ball bearings.
- Bearing Clearance and Preload:
Incorrect clearance or preload settings can lead to noise issues. Excessive clearance or inadequate preload can cause the rolling elements to impact the raceways, resulting in noise during rotation.
- Material and Manufacturing Quality:
The quality of materials and manufacturing processes can affect noise levels. Inconsistent or low-quality materials, improper heat treatment, or manufacturing defects can lead to noise generation during operation.
- Surface Finish:
The surface finish of the rolling elements and raceways can impact noise. Rough surfaces can generate more noise due to increased friction and potential irregularities.
- Sealing and Shielding:
Seals and shields that protect bearings can influence noise levels. While they are necessary for contamination prevention, they can also cause additional friction and generate noise.
- Operating Conditions:
External factors such as temperature, speed, and load can influence noise levels. High speeds or heavy loads can amplify noise due to increased stress on the bearing components.
- Wear and Deterioration:
As ball bearings wear over time, noise levels can increase. Worn components or inadequate lubrication can lead to more significant noise issues as the bearing operates.
To address these challenges and reduce noise in ball bearings, manufacturers and engineers employ various techniques, such as optimizing design, selecting suitable bearing types, using proper lubrication, maintaining accurate preload settings, and ensuring high-quality materials and manufacturing processes. Noise reduction efforts are essential to improve overall product quality, meet noise regulations, and enhance user experience in various applications.
How do Temperature and Environmental Conditions Affect the Performance of Ball Bearings?
Temperature and environmental conditions have a significant impact on the performance and longevity of ball bearings. The operating environment can influence factors such as lubrication effectiveness, material properties, and overall bearing behavior. Here’s how temperature and environmental conditions affect ball bearing performance:
- Lubrication:
Temperature variations can affect the viscosity and flow characteristics of lubricants. Extreme temperatures can cause lubricants to become too thin or too thick, leading to inadequate lubrication and increased friction. In high-temperature environments, lubricants can degrade, reducing their effectiveness.
- Material Properties:
Temperature changes can alter the material properties of the bearing components. High temperatures can lead to thermal expansion, affecting bearing clearances and potentially causing interference between components. Extreme cold temperatures can make materials more brittle and prone to fracture.
- Clearance Changes:
Temperature fluctuations can cause changes in the internal clearance of ball bearings. For instance, at high temperatures, materials expand, leading to increased clearance. This can affect bearing performance, load distribution, and overall stability.
- Corrosion and Contamination:
Harsh environmental conditions, such as exposure to moisture, chemicals, or abrasive particles, can lead to corrosion and contamination of bearing components. Corrosion weakens the material, while contamination accelerates wear and reduces bearing life.
- Thermal Stress:
Rapid temperature changes can result in thermal stress within the bearing components. Differential expansion and contraction between the inner and outer rings can lead to stress and distortion, affecting precision and bearing integrity.
- Noise and Vibration:
Temperature-related changes in material properties and internal clearances can influence noise and vibration levels. Extreme temperatures can lead to increased noise generation and vibration, affecting the overall operation of machinery.
- Lubricant Degradation:
Environmental factors like humidity, dust, and contaminants can lead to premature lubricant degradation. Oxidation, moisture absorption, and the presence of foreign particles can compromise the lubricant’s performance and contribute to increased friction and wear.
- Seal Effectiveness:
Seals and shields that protect bearings from contaminants can be affected by temperature fluctuations. Extreme temperatures can lead to seal hardening, cracking, or deformation, compromising their effectiveness in preventing contamination.
- Choosing Appropriate Bearings:
When selecting ball bearings for specific applications, engineers must consider the expected temperature and environmental conditions. High-temperature bearings, bearings with specialized coatings, and those with enhanced sealing mechanisms may be necessary to ensure reliable performance.
Overall, understanding the impact of temperature and environmental conditions on ball bearing performance is crucial for proper bearing selection, maintenance, and ensuring optimal operation in diverse industries and applications.
How do Ball Bearings Differ from Other Types of Bearings like Roller Bearings?
Ball bearings and roller bearings are two common types of rolling-element bearings, each with distinct designs and characteristics. Here’s a comparison of ball bearings and roller bearings:
- Design:
Ball Bearings: Ball bearings use spherical balls to separate and reduce friction between the bearing’s inner and outer rings. The balls enable rolling motion and smooth contact, minimizing friction.
Roller Bearings: Roller bearings, as the name suggests, use cylindrical or tapered rollers instead of balls. These rollers have larger contact areas, distributing loads over a broader surface.
- Friction and Efficiency:
Ball Bearings: Due to the point contact between the balls and the rings, ball bearings have lower friction and are more efficient at high speeds.
Roller Bearings: Roller bearings have a larger contact area, resulting in slightly higher friction compared to ball bearings. They are more suitable for heavy-load applications where efficiency is prioritized over high speeds.
- Load Capacity:
Ball Bearings: Ball bearings excel at handling light to moderate loads in both radial and axial directions. They are commonly used in applications where smooth rotation and low friction are important.
Roller Bearings: Roller bearings have a higher load-carrying capacity than ball bearings. They can support heavier radial and axial loads and are preferred for applications with significant loads or impact forces.
- Variability:
Ball Bearings: Ball bearings come in various designs, including deep groove, angular contact, and thrust ball bearings, each suitable for different applications.
Roller Bearings: Roller bearings have diverse types, including cylindrical, spherical, tapered, and needle roller bearings, each optimized for specific load and motion requirements.
- Speed Capability:
Ball Bearings: The reduced friction in ball bearings makes them suitable for high-speed applications, such as electric motors and precision machinery.
Roller Bearings: Roller bearings can handle higher loads but are generally better suited for moderate to low speeds due to slightly higher friction.
- Applications:
Ball Bearings: Ball bearings are used in applications where smooth motion, low friction, and moderate loads are essential, such as electric fans, bicycles, and some automotive components.
Roller Bearings: Roller bearings find applications in heavy machinery, construction equipment, automotive transmissions, and conveyor systems, where heavier loads and durability are crucial.
In summary, ball bearings and roller bearings differ in their design, friction characteristics, load capacities, speed capabilities, and applications. The choice between them depends on the specific requirements of the machinery and the type of loads and forces involved.
editor by CX 2024-05-15
China Custom Japan CZPT CZPT Bearings 6201 6202 6203 6204 6205 6208 6203RS Bearing CZPT 6204 6205 6206 6207 Ball Bearings 6203 6204 6201 CZPT carrier bearing
Product Description
Japan CZPT CZPT Bearings rs Bearing CZPT Ball Bearings NTN
Product Description
Deep Groove Ball Bearings:
Deep groove ball bearings are suitable for high or even very high speed operation, its very durable and do not require regular maintenance. This kind of bearing has small friction coefficient, high limit speed, various sizes and forms. It is widely used in precision instruments, low noise motors, automobiles, motorcycles and general machinery industries. It is mainly subjected to radial load and can also bear a certain amount of axial load.It can be used in gearboxes, instruments, motors, household appliances, internal combustion engines, roller skates, etc.
You can contact us to contact for specific information about the bearing model you want.
Detailed Photos
Size Information
|
Model |
d(mm) |
D(mm) |
B(mm) |
weight(kg) |
|
6000 |
10 |
26 |
8 |
0.018 |
|
6001 |
12 |
28 |
8 |
0.571 |
|
6002 |
15 |
32 |
9 |
0.03 |
|
6003 |
17 |
35 |
10 |
0.04 |
|
6004 |
20 |
42 |
12 |
0.068 |
|
6005 |
25 |
47 |
12 |
0.079 |
|
6006 |
30 |
55 |
13 |
0.113 |
|
6007 |
35 |
62 |
14 |
0.149 |
|
6008 |
40 |
68 |
15 |
0.185 |
|
6009 |
45 |
75 |
16 |
0.231 |
|
6571 |
50 |
80 |
16 |
0.25 |
|
6201 |
12 |
32 |
10 |
0.036 |
|
6202 |
15 |
35 |
11 |
0.045 |
|
6203 |
17 |
40 |
12 |
0.065 |
|
6204 |
20 |
47 |
14 |
0.103 |
|
6205 |
25 |
52 |
15 |
0.127 |
|
6206 |
30 |
62 |
16 |
0.203 |
|
6207 |
35 |
72 |
17 |
0.287 |
|
6208 |
40 |
80 |
18 |
0.367 |
|
6209 |
45 |
85 |
19 |
0.416 |
|
6210 |
50 |
90 |
20 |
0.462 |
Our Main Products
|
1 |
Deep groove ball bearings |
|
2 |
Insert bearings |
|
3 |
Angular contact ball bearings |
|
4 |
Self-aligning ball bearings |
|
5 |
Thrust ball bearings |
|
6 |
Cylindrical roller bearings |
|
7 |
Needle roller bearings |
|
8 |
Tapered roller bearings |
|
9 |
Spherical roller bearings |
|
10 |
Toroidal roller bearings |
|
11 |
Cylindrical roller thrust bearings |
|
12 |
Needle roller thrust bearings |
|
13 |
Tapered roller thrust bearings |
|
14 |
Spherical roller thrust bearings |
|
15 |
Ball and roller screws |
|
16 |
Linear guides and tables |
|
17 |
Pollow block bearing |
|
18 |
Wheel Bearings |
|
19 |
Cam followers |
|
20 |
Track rollers |
|
21 |
Super-precision bearings |
|
22 |
Plain bearings/Rod end bearings |
|
23 |
Bearing Units |
|
24 |
Bearing Housings |
Packaging & Shipping
|
package |
1)Neutral package + carton package 2)Carton package + pallet 3)Wood package + pallet |
|
Delivery Time |
1-3 days after order |
|
Shipping |
by air to door address / by sea to sea port |
Company Profile
Certifications
FAQ
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Contact Angle: | 25° |
|---|---|
| Aligning: | Non-Aligning Bearing |
| Separated: | Unseparated |
| Samples: |
US$ 3/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Are there Specific Maintenance Practices to Ensure the Longevity of Ball Bearings?
Maintaining ball bearings is essential to ensure their longevity, reliable performance, and prevent premature failure. Proper maintenance practices can extend the lifespan of ball bearings and the equipment they are used in. Here are specific maintenance practices to consider:
- Regular Lubrication:
Implement a regular lubrication schedule using the appropriate lubricant for the application. Lubrication reduces friction, prevents wear, and helps dissipate heat. Follow manufacturer guidelines for lubricant type, quantity, and frequency.
- Clean Environment:
Keep the operating environment clean and free from contaminants. Dust, dirt, and debris can infiltrate bearings and cause damage. Use seals or shields to protect bearings from contaminants, especially in harsh environments.
- Proper Installation:
Ensure correct installation of bearings using proper tools and techniques. Improper installation can lead to misalignment, uneven load distribution, and premature wear. Follow manufacturer recommendations for installation procedures.
- Regular Inspections:
Perform routine visual inspections to check for signs of wear, damage, or contamination. Regular inspections can help identify issues early and prevent further damage. Pay attention to noise, vibration, and temperature changes.
- Temperature Monitoring:
Monitor bearing temperatures during operation using infrared thermometers or sensors. Abnormal temperature increases can indicate inadequate lubrication, misalignment, or other problems.
- Correct Handling:
Handle bearings with care to prevent damage during storage, transportation, and installation. Avoid dropping or subjecting them to impacts that can affect their internal components.
- Bearing Removal and Replacement:
Follow proper procedures when removing and replacing bearings. Use appropriate tools and techniques to avoid damage to the bearing or the surrounding components.
- Alignment Maintenance:
Maintain proper shaft and housing alignment to prevent excessive loads and wear on the bearing. Misalignment can lead to increased stress and premature failure.
- Training and Education:
Provide training to operators and maintenance personnel on proper bearing maintenance and handling practices. Educated personnel are more likely to identify issues and perform maintenance correctly.
- Documented Records:
Keep records of maintenance activities, inspections, lubrication schedules, and any issues encountered. This documentation helps track the bearing’s performance over time and informs future maintenance decisions.
By implementing these maintenance practices, you can ensure the longevity of ball bearings, minimize downtime, reduce operational costs, and maintain the reliability of the equipment they are a part of.
How do Temperature and Environmental Conditions Affect the Performance of Ball Bearings?
Temperature and environmental conditions have a significant impact on the performance and longevity of ball bearings. The operating environment can influence factors such as lubrication effectiveness, material properties, and overall bearing behavior. Here’s how temperature and environmental conditions affect ball bearing performance:
- Lubrication:
Temperature variations can affect the viscosity and flow characteristics of lubricants. Extreme temperatures can cause lubricants to become too thin or too thick, leading to inadequate lubrication and increased friction. In high-temperature environments, lubricants can degrade, reducing their effectiveness.
- Material Properties:
Temperature changes can alter the material properties of the bearing components. High temperatures can lead to thermal expansion, affecting bearing clearances and potentially causing interference between components. Extreme cold temperatures can make materials more brittle and prone to fracture.
- Clearance Changes:
Temperature fluctuations can cause changes in the internal clearance of ball bearings. For instance, at high temperatures, materials expand, leading to increased clearance. This can affect bearing performance, load distribution, and overall stability.
- Corrosion and Contamination:
Harsh environmental conditions, such as exposure to moisture, chemicals, or abrasive particles, can lead to corrosion and contamination of bearing components. Corrosion weakens the material, while contamination accelerates wear and reduces bearing life.
- Thermal Stress:
Rapid temperature changes can result in thermal stress within the bearing components. Differential expansion and contraction between the inner and outer rings can lead to stress and distortion, affecting precision and bearing integrity.
- Noise and Vibration:
Temperature-related changes in material properties and internal clearances can influence noise and vibration levels. Extreme temperatures can lead to increased noise generation and vibration, affecting the overall operation of machinery.
- Lubricant Degradation:
Environmental factors like humidity, dust, and contaminants can lead to premature lubricant degradation. Oxidation, moisture absorption, and the presence of foreign particles can compromise the lubricant’s performance and contribute to increased friction and wear.
- Seal Effectiveness:
Seals and shields that protect bearings from contaminants can be affected by temperature fluctuations. Extreme temperatures can lead to seal hardening, cracking, or deformation, compromising their effectiveness in preventing contamination.
- Choosing Appropriate Bearings:
When selecting ball bearings for specific applications, engineers must consider the expected temperature and environmental conditions. High-temperature bearings, bearings with specialized coatings, and those with enhanced sealing mechanisms may be necessary to ensure reliable performance.
Overall, understanding the impact of temperature and environmental conditions on ball bearing performance is crucial for proper bearing selection, maintenance, and ensuring optimal operation in diverse industries and applications.
Can you Explain the Various Types of Ball Bearings and their Specific Use Cases?
Ball bearings come in various types, each designed to meet specific application requirements. Here’s an overview of the different types of ball bearings and their specific use cases:
- Deep Groove Ball Bearings:
Deep groove ball bearings are the most common and versatile type. They have a deep raceway that allows them to handle both radial and axial loads. They are used in a wide range of applications, including electric motors, household appliances, automotive components, and industrial machinery.
- Angular Contact Ball Bearings:
Angular contact ball bearings have a contact angle that enables them to handle both radial and axial loads at specific angles. They are suitable for applications where combined loads or thrust loads need to be supported, such as in machine tool spindles, pumps, and agricultural equipment.
- Self-Aligning Ball Bearings:
Self-aligning ball bearings have two rows of balls and are designed to accommodate misalignment between the shaft and the housing. They are used in applications where shaft deflection or misalignment is common, such as conveyor systems, textile machinery, and paper mills.
- Thrust Ball Bearings:
Thrust ball bearings are designed to support axial loads in one direction. They are commonly used in applications where axial loads need to be supported, such as in automotive transmissions, steering systems, and crane hooks.
- Single-Row vs. Double-Row Bearings:
Single-row ball bearings have a single set of balls and are suitable for moderate load and speed applications. Double-row ball bearings have two sets of balls and offer higher load-carrying capacity. Double-row designs are used in applications such as machine tool spindles and printing presses.
- Miniature and Instrument Ball Bearings:
Miniature ball bearings are smaller in size and are used in applications with limited space and lower load requirements. They are commonly used in small electric motors, medical devices, and precision instruments.
- Max-Type and Conrad Bearings:
Max-type ball bearings have a larger number of balls to increase load-carrying capacity. Conrad bearings have fewer balls and are used in applications with moderate loads and speeds.
- High-Precision Ball Bearings:
High-precision ball bearings are designed for applications where accuracy and precision are critical, such as machine tool spindles, aerospace components, and optical instruments.
- High-Speed Ball Bearings:
High-speed ball bearings are engineered to minimize friction and accommodate rapid rotation. They are used in applications such as dental handpieces, turbochargers, and centrifuges.
In summary, the various types of ball bearings are tailored to different application requirements, including load type, direction, speed, and environmental conditions. Selecting the appropriate type of ball bearing ensures optimal performance and longevity in specific applications.
editor by CX 2024-05-13
China Standard 6201 6202 6206 6207 6208 Zz 2rz High Quality Deep Groove Ball Bearings bearing driver kit
Product Description
Product Description
Deep groove ball bearing are the most common type and are used in a wide variety of applications. Not only are they capable of supporting radial loads but also moderate axial loads in either direction. Due to their low torque, they are suitable for applications where high speed and low power loss is required. They are easy to mount and suitable for many different configurations.
Product Parameters
| Bearing No |
Dimensions ( mm ) | Load Capacity ( kN ) | Rotation Speed ( RPM ) | Weight | |||||||
| d | D | B | RSMIN | D2Max | fMax | Cr | Co | Grease | Oil | kg | |
| 6000 | 10 | 26 | 8 | 0.3 | 29.2 | 0.7 | 4.60 | 2.00 | 26000 | 38000 | 0.02 |
| 6200 | 10 | 30 | 9 | 0.6 | 34.7 | 1.12 | 5.10 | 2.40 | 22000 | 32000 | 0.03 |
| 6300 | 10 | 35 | 11 | 0.6 | 39.7 | 1.12 | 8.10 | 3.50 | 20000 | 29000 | 0.05 |
| 6001 | 12 | 28 | 8 | 0.3 | 30.8 | 0.85 | 5.10 | 2.40 | 23000 | 33000 | 0.02 |
| 6201 | 12 | 32 | 10 | 0.6 | 36.7 | 1.12 | 6.80 | 3.00 | 21000 | 30000 | 0.04 |
| 6301 | 12 | 37 | 12 | 1.0 | 41.3 | 1.12 | 9.70 | 4.20 | 19000 | 27000 | 0.06 |
| 6002 | 15 | 32 | 9 | 0.3 | 36.7 | 1.12 | 5.60 | 2.80 | 20000 | 30000 | 0.03 |
| 6202 | 15 | 35 | 11 | 0.6 | 39.7 | 1.12 | 7.60 | 3.70 | 19000 | 28000 | 0.05 |
| 6302 | 15 | 42 | 13 | 1.0 | 46.3 | 1.12 | 11.40 | 5.40 | 16000 | 24000 | 0.08 |
| 6003 | 17 | 35 | 10 | 0.3 | 39.7 | 1.12 | 6.00 | 3.30 | 19000 | 28000 | 0.04 |
| 6203 | 17 | 40 | 12 | 0.6 | 44.6 | 1.12 | 9.60 | 4.80 | 17000 | 25000 | 0.07 |
| 6303 | 17 | 47 | 14 | 1.0 | 52.7 | 1.12 | 13.60 | 6.60 | 15000 | 22000 | 0.12 |
| 6004 | 20 | 42 | 12 | 0.3 | 46.3 | 1.12 | 9.40 | 5.00 | 17000 | 25000 | 0.07 |
| 6204 | 20 | 47 | 14 | 0.6 | 52.7 | 1.12 | 12.80 | 6.60 | 15000 | 22000 | 0.1 |
| 6304 | 20 | 52 | 15 | 1.0 | 57.9 | 1.12 | 15.90 | 7.80 | 13000 | 20000 | 0.14 |
| 6005 | 25 | 47 | 12 | 0.6 | 52.7 | 1.12 | 10.10 | 5.80 | 14000 | 21000 | 0.08 |
| 6205 | 25 | 52 | 15 | 1.0 | 57.9 | 1.12 | 14.00 | 7.90 | 14000 | 20000 | 0.13 |
| 6305 | 25 | 62 | 17 | 1.1 | 67.7 | 1.7 | 20.60 | 11.20 | 12000 | 17000 | 0.22 |
| 6405 | 25 | 80 | 21 | 1.5 | 86.6 | 1.7 | 36.10 | 18.80 | 10000 | 15000 | 0.53 |
| 6006 | 30 | 55 | 13 | 1.0 | 60.7 | 1.12 | 13.20 | 8.30 | 12000 | 18000 | 0.11 |
| 6206 | 30 | 62 | 16 | 1.0 | 67.7 | 1.7 | 19.50 | 11.30 | 11000 | 16000 | 0.2 |
| 6306 | 30 | 72 | 19 | 1.1 | 78.6 | 1.7 | 26.60 | 15.00 | 10000 | 15000 | 0.35 |
| 6406 | 30 | 90 | 23 | 1.5 | 96.5 | 2.46 | 47.30 | 24.50 | 9300 | 13000 | 0.74 |
| 6007 | 35 | 62 | 14 | 1.0 | 67.7 | 1.7 | 15.90 | 10.30 | 11000 | 16000 | 0.15 |
| 6207 | 35 | 72 | 17 | 1.1 | 78.6 | 1.7 | 25.70 | 15.30 | 10000 | 14000 | 0.29 |
| 6307 | 35 | 80 | 21 | 1.5 | 86.6 | 1.7 | 33.40 | 19.20 | 9300 | 13000 | 0.45 |
| 6407 | 35 | 100 | 25 | 1.5 | — | — | 55.50 | 29.40 | 8500 | 12000 | 0.95 |
| 6008 | 40 | 68 | 15 | 1 | 74.6 | 1.7 | 16.80 | 11.50 | 10000 | 15000 | 0.19 |
| 6208 | 40 | 80 | 18 | 1.1 | 86.6 | 1.7 | 29.50 | 18.10 | 8800 | 13000 | 0.37 |
| 6308 | 40 | 90 | 23 | 1.5 | 96.5 | 2.46 | 40.70 | 24.00 | 8500 | 12000 | 0.64 |
| 6408 | 40 | 110 | 27 | 2 | 116.6 | 2.46 | 63.70 | 34.60 | 7800 | 11000 | 1.25 |
Packaging & Shipping
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Contact Angle: | 15° |
|---|---|
| Aligning: | Non-Aligning Bearing |
| Separated: | Unseparated |
| Rows Number: | Single |
| Load Direction: | Radial Bearing |
| Material: | Bearing Steel |
| Samples: |
US$ 0.1/Piece
1 Piece(Min.Order) | |
|---|
What are the Challenges Associated with Noise Reduction in Ball Bearings?
Noise reduction in ball bearings is a crucial consideration, especially in applications where noise levels must be minimized for operational efficiency and user comfort. While ball bearings are designed to operate smoothly, there are several challenges associated with reducing noise in their operation:
- Vibration:
Vibration generated by the movement of rolling elements and raceways can lead to noise. Even minor irregularities in bearing components or the mounting system can cause vibration that translates into audible noise.
- Bearing Type and Design:
The type and design of the ball bearing can impact noise generation. For example, deep groove ball bearings are known for their quiet operation, while angular contact bearings can generate more noise due to their higher contact angles.
- Lubrication:
Improper or inadequate lubrication can result in increased friction and wear, leading to noise. Choosing the right lubricant and maintaining proper lubrication levels are essential for reducing noise in ball bearings.
- Bearing Clearance and Preload:
Incorrect clearance or preload settings can lead to noise issues. Excessive clearance or inadequate preload can cause the rolling elements to impact the raceways, resulting in noise during rotation.
- Material and Manufacturing Quality:
The quality of materials and manufacturing processes can affect noise levels. Inconsistent or low-quality materials, improper heat treatment, or manufacturing defects can lead to noise generation during operation.
- Surface Finish:
The surface finish of the rolling elements and raceways can impact noise. Rough surfaces can generate more noise due to increased friction and potential irregularities.
- Sealing and Shielding:
Seals and shields that protect bearings can influence noise levels. While they are necessary for contamination prevention, they can also cause additional friction and generate noise.
- Operating Conditions:
External factors such as temperature, speed, and load can influence noise levels. High speeds or heavy loads can amplify noise due to increased stress on the bearing components.
- Wear and Deterioration:
As ball bearings wear over time, noise levels can increase. Worn components or inadequate lubrication can lead to more significant noise issues as the bearing operates.
To address these challenges and reduce noise in ball bearings, manufacturers and engineers employ various techniques, such as optimizing design, selecting suitable bearing types, using proper lubrication, maintaining accurate preload settings, and ensuring high-quality materials and manufacturing processes. Noise reduction efforts are essential to improve overall product quality, meet noise regulations, and enhance user experience in various applications.
How do Temperature and Environmental Conditions Affect the Performance of Ball Bearings?
Temperature and environmental conditions have a significant impact on the performance and longevity of ball bearings. The operating environment can influence factors such as lubrication effectiveness, material properties, and overall bearing behavior. Here’s how temperature and environmental conditions affect ball bearing performance:
- Lubrication:
Temperature variations can affect the viscosity and flow characteristics of lubricants. Extreme temperatures can cause lubricants to become too thin or too thick, leading to inadequate lubrication and increased friction. In high-temperature environments, lubricants can degrade, reducing their effectiveness.
- Material Properties:
Temperature changes can alter the material properties of the bearing components. High temperatures can lead to thermal expansion, affecting bearing clearances and potentially causing interference between components. Extreme cold temperatures can make materials more brittle and prone to fracture.
- Clearance Changes:
Temperature fluctuations can cause changes in the internal clearance of ball bearings. For instance, at high temperatures, materials expand, leading to increased clearance. This can affect bearing performance, load distribution, and overall stability.
- Corrosion and Contamination:
Harsh environmental conditions, such as exposure to moisture, chemicals, or abrasive particles, can lead to corrosion and contamination of bearing components. Corrosion weakens the material, while contamination accelerates wear and reduces bearing life.
- Thermal Stress:
Rapid temperature changes can result in thermal stress within the bearing components. Differential expansion and contraction between the inner and outer rings can lead to stress and distortion, affecting precision and bearing integrity.
- Noise and Vibration:
Temperature-related changes in material properties and internal clearances can influence noise and vibration levels. Extreme temperatures can lead to increased noise generation and vibration, affecting the overall operation of machinery.
- Lubricant Degradation:
Environmental factors like humidity, dust, and contaminants can lead to premature lubricant degradation. Oxidation, moisture absorption, and the presence of foreign particles can compromise the lubricant’s performance and contribute to increased friction and wear.
- Seal Effectiveness:
Seals and shields that protect bearings from contaminants can be affected by temperature fluctuations. Extreme temperatures can lead to seal hardening, cracking, or deformation, compromising their effectiveness in preventing contamination.
- Choosing Appropriate Bearings:
When selecting ball bearings for specific applications, engineers must consider the expected temperature and environmental conditions. High-temperature bearings, bearings with specialized coatings, and those with enhanced sealing mechanisms may be necessary to ensure reliable performance.
Overall, understanding the impact of temperature and environmental conditions on ball bearing performance is crucial for proper bearing selection, maintenance, and ensuring optimal operation in diverse industries and applications.
What is a Ball Bearing and How does it Function in Various Applications?
A ball bearing is a type of rolling-element bearing that uses balls to reduce friction between moving parts and support radial and axial loads. It consists of an outer ring, an inner ring, a set of balls, and a cage that separates and maintains a consistent spacing between the balls. Here’s how ball bearings function in various applications:
- Reduction of Friction:
Ball bearings function by replacing sliding friction with rolling friction. The smooth, spherical balls minimize the contact area between the inner and outer rings, resulting in lower friction and reduced heat generation.
- Radial and Axial Load Support:
Ball bearings are designed to support both radial loads (forces perpendicular to the shaft’s axis) and axial loads (forces parallel to the shaft’s axis). The distribution of balls within the bearing ensures load-carrying capacity in multiple directions.
- Smooth Rotational Movement:
Ball bearings facilitate smooth and precise rotational movement. The rolling motion of the balls allows for controlled and continuous rotation with minimal resistance.
- Applications in Machinery:
Ball bearings are used in a wide range of machinery and equipment, including motors, generators, gearboxes, conveyors, and fans. They enable the efficient transfer of motion while reducing wear and energy losses.
- Automotive Industry:
Ball bearings are extensively used in automobiles for various applications, including wheel hubs, transmission systems, steering mechanisms, and engine components. They provide reliability and durability in challenging automotive environments.
- Industrial Machinery:
In industrial settings, ball bearings support rotating shafts and ensure the smooth operation of equipment such as pumps, compressors, and machine tools.
- High-Speed Applications:
Ball bearings are suitable for high-speed applications due to their low friction and ability to accommodate rapid rotation. They are used in applications like electric motors and aerospace components.
- Precision Instruments:
For precision instruments, such as watches, cameras, and medical devices, ball bearings provide accurate rotational movement and contribute to the overall performance of the instrument.
- Variety of Sizes and Types:
Ball bearings come in various sizes, configurations, and materials to suit different applications. Different types include deep groove ball bearings, angular contact ball bearings, thrust ball bearings, and more.
In summary, ball bearings are essential components in a wide range of applications where smooth rotation, load support, and reduced friction are critical. Their versatility, reliability, and efficiency make them indispensable in industries spanning from automotive to industrial machinery to precision instruments.
editor by CX 2024-03-06
China factory CZPT CZPT CZPT CZPT CZPT CZPT 6206 6207 6208 6209 6210 6211 6212 6213 6214 6215 6216 6217 6218 6219 6220 Deep Groove Ball Bearing Branded Bearings bearing assembly
Product Description
CZPT CZPT CZPT CZPT CZPT CZPT Deep Groove Ball Bearing Branded Bearings
Simply Bearings supplies a wide range of bearings designed for particular applications. Ball bearings bearing ball bearings thrust bearing roller bearing needle bearing pillow block bearings linear bearings linear bearings are the simplest and most common type of bearing. These linear bearings, bearing types bearings can handle both thrust and radial loads but are limited as to the weight of the load itself. If overloaded,bearing taper roller bearing needle roller bearings they can deform.
Deep groove ball bearings can support moderate radial loads and moderate axial loads (parallel to the shaft). They can operate at high speeds. Ball bearings with shields or seals for protection are usually lubricated to last for the operating lifeMiniature & Instrument Series, Stainless Steel – Inch and MetricOpen, Shielded, Shielded and Modified Dimension Bearings: Inch MetricSingle Row Deep Groove6000, 6200 and 6300 Series: Open, Shielded, Sealed – Metric
Main purposes:
Automotive: rear wheel, transmission, electrical equipment components
Electric: General Motors, Household Appliances
Other: instruments, internal combustion engines, construction machinery, railway vehicles, handling machinery, agricultural machinery, all kinds of industrial machiner
| Product | Bearing Type | Bore Dia (d) (mm) | Outer Dia (D) (mm) | Width (B) (mm) | Radius (min) (rs) (mm) | Dynamic Load Rating (Cr) (N) | Static Load Rating (Cor) (N) |
| 6002 | Open | 15 | 32 | 9 | 0.3 | 5600 | 2850 |
| 6002-2RS | Sealed | 15 | 32 | 9 | 0.3 | 5600 | 2850 |
| 6002ZZ | Shielded | 15 | 32 | 9 | 0.3 | 8100 | 3450 |
| 6202 | Open | 15 | 35 | 11 | 0.6 | 7650 | 3750 |
| 6202-2RS | Sealed | 15 | 35 | 11 | 0.6 | 7650 | 3750 |
| 6202ZZ | Shielded | 15 | 35 | 11 | 0.6 | 7650 | 3750 |
| 6302 | Open | 15 | 42 | 13 | 1 | 11400 | 5450 |
| 6302-2RS | Sealed | 15 | 42 | 13 | 1 | 11400 | 5450 |
| 6302ZZ | Shielded | 15 | 42 | 13 | 1 | 11400 | 5450 |
| 6003 | Open | 17 | 35 | 10 | 0.3 | 6000 | 3250 |
| 6003-2RS | Sealed | 17 | 35 | 10 | 0.3 | 6000 | 3250 |
| 6003ZZ | Shielded | 17 | 35 | 10 | 0.3 | 6000 | 3250 |
| 6203 | Open | 17 | 40 | 12 | 0.6 | 9550 | 4800 |
| 6203-2RS | Sealed | 17 | 40 | 12 | 0.6 | 9550 | 4800 |
| 6203ZZ | Shielded | 17 | 40 | 12 | 0.6 | 9550 | 4800 |
| 6303 | Open | 17 | 47 | 14 | 1 | 13600 | 6650 |
| 6303-2RS | Sealed | 17 | 47 | 14 | 1 | 13600 | 6650 |
| 6303ZZ | Shielded | 17 | 47 | 14 | 1 | 13600 | 6650 |
Related Products
Company Introduction
Great Bearing Co., Ltd. is a professional manufacturer engaged in the research, development, production, sale and service of Cylindrical roller bearing, tapered roller bearing, deep groove ball bearing, Spherical roller bearing etc.
Our factory is located in HangZhou city of the biggest bearing market area in China. Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction. In recent years, our company has introduced a series of advanced equipment including double-end face grinding machine etc., flaw detector…In addition, we have obtained ISO9001: 2008 certificates. Selling well in all cities and provinces around China, our products are also exported to clients in such countries and regions as Europe, America, Middle East, Africa and Southeast Asian.
We also welcome OEM and ODM orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements.
Certificates
Our advantages
FAQ:
Q: Are you trading company or manufacturer ?
A: We are factory and trading company. Our factory sell market is in china with our brand GREAT.
Q: How long is your delivery time?
A: We have enough stock for roller bearings and ball bearings. Delivery time within 7 days. 15-25 days for 1 container to OEM brand following your request
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge ,please you pay the cost of freight.
Q: What is your payment term?
A: We accept 30% TT advance ,70% balance against the bill lading copy. Also 100% IRR L/C ok.
Packaging & Shipping
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Separated: | Unseparated |
|---|---|
| Rows Number: | Single |
| Material: | Stainless Steel |
| Application: | Machinery |
| Feature: | Long Life |
| Service: | OEM ODM |
| Samples: |
US$ 0.5/Set
1 Set(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
How does Preload Affect the Performance and Efficiency of Ball Bearings?
Preload is a crucial factor in ball bearing design that significantly impacts the performance, efficiency, and overall behavior of the bearings in various applications. Preload refers to the intentional axial force applied to the bearing’s rolling elements before it is mounted. This force eliminates internal clearance and creates contact between the rolling elements and the raceways. Here’s how preload affects ball bearing performance:
- Reduction of Internal Clearance:
Applying preload reduces the internal clearance between the rolling elements and the raceways. This eliminates play within the bearing, ensuring that the rolling elements are in constant contact with the raceways. This reduced internal clearance enhances precision and reduces vibrations during operation.
- Increased Stiffness:
Preloaded bearings are stiffer due to the elimination of internal clearance. This increased stiffness improves the bearing’s ability to handle axial and radial loads with higher accuracy and minimal deflection.
- Minimized Axial Play:
Preload minimizes or eliminates axial play within the bearing. This is especially important in applications where axial movement needs to be minimized, such as machine tool spindles and precision instruments.
- Enhanced Rigidity:
The stiffness resulting from preload enhances the bearing’s rigidity, making it less susceptible to deformation under load. This is critical for maintaining precision and accuracy in applications that require minimal deflection.
- Reduction in Ball Slippage:
Preload reduces the likelihood of ball slippage within the bearing, ensuring consistent contact between the rolling elements and the raceways. This leads to improved efficiency and better load distribution.
- Improved Running Accuracy:
Preloading enhances the running accuracy of the bearing, ensuring that it maintains precise rotational characteristics even under varying loads and speeds. This is essential for applications requiring high accuracy and repeatability.
- Optimized Performance at High Speeds:
Preload helps prevent skidding and slipping of the rolling elements during high-speed operation. This ensures that the bearing remains stable, reducing the risk of noise, vibration, and premature wear.
- Impact on Friction and Heat Generation:
While preload reduces internal clearance and friction, excessive preload can lead to higher friction and increased heat generation. A balance must be struck between optimal preload and minimizing friction-related issues.
- Application-Specific Considerations:
The appropriate amount of preload depends on the application’s requirements, such as load, speed, accuracy, and operating conditions. Over-preloading can lead to increased stress and premature bearing failure, while under-preloading may result in inadequate rigidity and reduced performance.
Overall, preload plays a critical role in optimizing the performance, accuracy, and efficiency of ball bearings. Engineers must carefully determine the right preload level for their specific applications to achieve the desired performance characteristics and avoid potential issues related to overloading or inadequate rigidity.
How do Ceramic Ball Bearings Compare to Traditional Steel Ball Bearings in Terms of Performance?
Ceramic ball bearings and traditional steel ball bearings have distinct characteristics that can impact their performance in various applications. Here’s a comparison of how these two types of bearings differ in terms of performance:
- Material Composition:
Ceramic Ball Bearings:
Ceramic ball bearings use ceramic rolling elements, typically made from materials like silicon nitride (Si3N4) or zirconium dioxide (ZrO2). These ceramics are known for their high hardness, low density, and resistance to corrosion and wear.
Traditional Steel Ball Bearings:
Traditional steel ball bearings use steel rolling elements. The type of steel used can vary, but common materials include chrome steel (52100) and stainless steel (440C). Steel bearings are known for their durability and strength.
- Friction and Heat:
Ceramic Ball Bearings:
Ceramic bearings have lower friction coefficients compared to steel bearings. This results in reduced heat generation during operation, contributing to higher efficiency and potential energy savings.
Traditional Steel Ball Bearings:
Steel bearings can generate more heat due to higher friction coefficients. This can lead to increased energy consumption in applications where efficiency is crucial.
- Weight:
Ceramic Ball Bearings:
Ceramic bearings are lighter than steel bearings due to the lower density of ceramics. This weight reduction can be advantageous in applications where minimizing weight is important.
Traditional Steel Ball Bearings:
Steel bearings are heavier than ceramic bearings due to the higher density of steel. This weight may not be as critical in all applications but could impact overall equipment weight and portability.
- Corrosion Resistance:
Ceramic Ball Bearings:
Ceramic bearings have excellent corrosion resistance, making them suitable for applications in corrosive environments, such as marine or chemical industries.
Traditional Steel Ball Bearings:
Steel bearings are susceptible to corrosion, especially in harsh environments. Stainless steel variants offer improved corrosion resistance but may still corrode over time.
- Speed and Precision:
Ceramic Ball Bearings:
Ceramic bearings can operate at higher speeds due to their lower friction and ability to withstand higher temperatures. They are also known for their high precision and low levels of thermal expansion.
Traditional Steel Ball Bearings:
Steel bearings can operate at high speeds as well, but their heat generation may limit performance in certain applications. Precision steel bearings are also available but may have slightly different characteristics compared to ceramics.
- Cost:
Ceramic Ball Bearings:
Ceramic bearings are generally more expensive to manufacture than steel bearings due to the cost of ceramic materials and the challenges in producing precision ceramic components.
Traditional Steel Ball Bearings:
Steel bearings are often more cost-effective to manufacture, making them a more economical choice for many applications.
In conclusion, ceramic ball bearings and traditional steel ball bearings offer different performance characteristics. Ceramic bearings excel in terms of low friction, heat generation, corrosion resistance, and weight reduction. Steel bearings are durable, cost-effective, and widely used in various applications. The choice between the two depends on the specific requirements of the application, such as speed, precision, corrosion resistance, and budget considerations.
What are the Different Components that Make up a Typical Ball Bearing?
A typical ball bearing consists of several essential components that work together to reduce friction and support loads. Here are the main components that make up a ball bearing:
- Outer Ring:
The outer ring is the stationary part of the bearing that provides support and houses the other components. It contains raceways (grooves) that guide the balls’ movement.
- Inner Ring:
The inner ring is the rotating part of the bearing that attaches to the shaft. It also contains raceways that correspond to those on the outer ring, allowing the balls to roll smoothly.
- Balls:
The spherical balls are the rolling elements that reduce friction between the inner and outer rings. Their smooth rolling motion enables efficient movement and load distribution.
- Cage or Retainer:
The cage, also known as the retainer, maintains a consistent spacing between the balls. It prevents the balls from touching each other, reducing friction and preventing jamming.
- Seals and Shields:
Many ball bearings include seals or shields to protect the internal components from contaminants and retain lubrication. Seals provide better protection against contaminants, while shields offer less resistance to rotation.
- Lubricant:
Lubrication is essential to reduce friction, wear, and heat generation. Bearings are typically filled with lubricants that ensure smooth movement between the balls and raceways.
- Flanges and Snap Rings:
In some designs, flanges or snap rings are added to help position and secure the bearing in its housing or on the shaft. Flanges prevent axial movement, while snap rings secure the bearing radially.
- Raceways:
Raceways are the grooved tracks on the inner and outer rings where the balls roll. The shape and design of the raceways influence the bearing’s load-carrying capacity and performance.
- Anti-Friction Shield:
In certain high-speed applications, a thin anti-friction shield can be placed between the inner and outer rings to minimize friction and heat generation.
These components work together to enable the smooth rolling motion, load support, and reduced friction that characterize ball bearings. The proper design and assembly of these components ensure the bearing’s optimal performance and longevity in various applications.
editor by CX 2024-02-04
China Standard CZPT CZPT Rolamento Bearings 6201 6202 6204 6206 6208 6210 6211 6212 6213 6214 6215 6216 6217 6218 6219 6220 Zz 2RS DDU Deep Groove Ball Bearing bearing and race
Product Description
Product Description
NSK CZPT Rolamento Bearings ZZ 2RS DDU Deep Groove Ball Bearing
are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for
low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions,
are easy to mount, and require less maintenance than other bearing types.
| Product name | Deep groove ball bearings |
| Material | Bearing Steel |
| Standard | DIN GB ISO JIS |
| Bearing Package | Barreled, bagged, boxed, palletized or as customers’ requirement. |
| Service | OEM service provided |
| Delivery time | 3-10 days depends on quantity needed |
Detailed Photos
Product Parameters
| 6000 series deep groove ball bearings | ||||||
| Bearing No. | Boundary Dimensions(mm) | Basic Load Rating(N) | Weight(KG) | |||
| d | D | B | Cr | Cor | ||
| 604 | 4 | 12 | 4 | 960 | 350 | 0.571 |
| 605 | 5 | 14 | 5 | 1070 | 420 | 0.0037 |
| 606 | 6 | 17 | 6 | 1960 | 730 | 0.0069 |
| 607 | 7 | 19 | 6 | 2800 | 1060 | 0.0082 |
| 608 | 8 | 22 | 7 | 3290 | 1360 | 0.0129 |
| 609 | 9 | 24 | 7 | 3330 | 1410 | 0.016 |
| 6000 | 10 | 26 | 8 | 4160 | 1780 | 0.019 |
| 6001 | 12 | 28 | 8 | 5110 | 2380 | 0.571 |
| 6002 | 15 | 32 | 9 | 5590 | 2840 | 0.03 |
| 6003 | 17 | 35 | 10 | 6000 | 3250 | 0.039 |
| 6004 | 20 | 42 | 12 | 9390 | 5571 | 0.069 |
| 6005 | 25 | 47 | 12 | 10060 | 5860 | 0.08 |
| 6006 | 30 | 55 | 13 | 11900 | 7460 | 0.12 |
| 6007 | 35 | 62 | 14 | 16210 | 10420 | 0.16 |
| 6008 | 40 | 68 | 15 | 17030 | 11700 | 0.19 |
| 6009 | 45 | 75 | 16 | 21080 | 14780 | 0.25 |
| 6571 | 50 | 80 | 16 | 22000 | 16260 | 0.26 |
| 6011 | 55 | 90 | 18 | 31500 | 18400 | 0.39 |
| 6012 | 60 | 95 | 18 | 30000 | 23000 | 0.42 |
| 6013 | 65 | 100 | 18 | 32000 | 25000 | 0.44 |
| 6014 | 70 | 110 | 20 | 38000 | 31000 | 0.6 |
| 6015 | 75 | 115 | 20 | 38000 | 31000 | 0.64 |
| 6016 | 80 | 125 | 22 | 47500 | 40000 | 0.85 |
| 6017 | 85 | 130 | 22 | 47500 | 40000 | 0.89 |
| 6018 | 90 | 140 | 24 | 63800 | 59000 | 1.15 |
| 6019 | 95 | 145 | 24 | 66700 | 62300 | 1.2 |
| 6571 | 100 | 150 | 24 | 72500 | 70000 | 1.25 |
| 6200 Series Miniature Deep Groove Ball Bearing | ||||||
| Bearing No. | Boundary Dimensions(mm) | Basic Load Rating(N) | Weight(KG) | |||
| d | D | B | Cr | Cor | ||
| 624 | 4 | 13 | 5 | 1150 | 400 | 0.0032 |
| 625 | 5 | 16 | 5 | 1880 | 680 | 0.0051 |
| 626 | 6 | 19 | 6 | 2800 | 1060 | 0. |
| 627 | 7 | 22 | 7 | 3290 | 1360 | 0.0131 |
| 628 | 8 | 24 | 8 | 3330 | 1410 | 0.017 |
| 629 | 9 | 26 | 8 | 4160 | 1780 | 0.0191 |
| 6200 | 10 | 30 | 9 | 5110 | 2380 | 0.032 |
| 6201 | 12 | 32 | 10 | 6180 | 3060 | 0.037 |
| 6202 | 15 | 35 | 11 | 7450 | 3700 | 0.045 |
| 6203 | 17 | 40 | 12 | 9560 | 4780 | 0.065 |
| 6204 | 20 | 47 | 14 | 12840 | 6650 | 0.11 |
| 6205 | 25 | 52 | 15 | 14571 | 7930 | 0.13 |
| 6206 | 30 | 62 | 16 | 19460 | 11310 | 0.2 |
| 6207 | 35 | 72 | 17 | 25670 | 15300 | 0.29 |
| 6208 | 40 | 80 | 18 | 29520 | 181400 | 0.37 |
| 6209 | 45 | 85 | 19 | 32500 | 20400 | 0.41 |
| 6210 | 50 | 90 | 20 | 35000 | 32300 | 0.46 |
| 6211 | 55 | 100 | 21 | 43500 | 29200 | 0.61 |
| 6212 | 60 | 110 | 22 | 52500 | 36000 | 0.78 |
| 6213 | 65 | 120 | 23 | 57200 | 45710 | 0.99 |
| 6214 | 70 | 125 | 24 | 62000 | 44000 | 1.05 |
| 6215 | 75 | 130 | 25 | 66000 | 49500 | 1.2 |
| 6216 | 80 | 140 | 26 | 72500 | 53000 | 1.4 |
| 6217 | 85 | 150 | 28 | 83500 | 64000 | 1.8 |
| 6218 | 90 | 160 | 30 | 96000 | 71500 | 2.15 |
| 6219 | 95 | 170 | 32 | 109000 | 82000 | 2.6 |
| 6220 | 100 | 180 | 34 | 122000 | 93000 | 3.15 |
Packaging & Shipping
Company Profile
Our Advantages
Our Advantages:
1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.
SAMPLES
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to
pay samples charge and shipping cost.
3. It’s better to start your order with Trade Assurance to get full protection for your samples order.
CUSTOMIZED
The customized LOGO or drawing is acceptable for us.
MOQ
1. MOQ: 10 PCS standard bearings.
2. MOQ: 1000 PCS customized your brand bearings.
OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield.
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.
FAQ
1.What is the minimum order quantity for this product?
Can be negotiated, we will try our best to meet customer needs.Our company is mainly based on wholesale sales,
most customers’orders are more than 1 ton.
2.What is your latest delivery time?
Most orders will be shipped within 7-15 days of payment being received.
3.Does your company have quality assurance?
Yes, for 1 years.
4.What is the competitiveness of your company’s products compared to other companies?
High precision, high speed, low noise.
5.What are the advantages of your company’s services compared to other companies?
Answer questions online 24 hours a day, reply in a timely manner, and provide various documents required by
customers for customs clearance or sales. 100% after-sales service.
6.Which payment method does your company support?
Do our best to meet customer needs, negotiable.
7.How to contact us quickly?
Please send us an inquiry or message and leave your other contact information, such as phone number,
account or account, we will contact you as soon as possible and provide the detailed information you need.
Please feel free to contact us, if you have any other question
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Contact Angle: | 0 |
|---|---|
| Aligning: | Non-Aligning Bearing |
| Separated: | Unseparated |
| Rows Number: | Single |
| Load Direction: | Radial Bearing |
| Material: | Bearing Steel |
| Samples: |
US$ 10/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What are the Materials Typically Used in Manufacturing Ball Bearings and Their Advantages?
Ball bearings are manufactured using a variety of materials, each chosen for its specific properties and advantages in various applications. Here are some commonly used materials in ball bearing manufacturing and their respective benefits:
- High-Carbon Chrome Steel (AISI 52100):
This is the most common material used for ball bearing manufacturing. It offers excellent hardness, wear resistance, and fatigue strength. High-carbon chrome steel bearings are suitable for a wide range of applications, from industrial machinery to automotive components.
- Stainless Steel (AISI 440C, AISI 304, AISI 316):
Stainless steel bearings are corrosion-resistant and suitable for applications where moisture, chemicals, or exposure to harsh environments are concerns. AISI 440C offers high hardness and corrosion resistance, while AISI 304 and AISI 316 provide good corrosion resistance and are often used in food and medical industries.
- Ceramic:
Ceramic bearings use silicon nitride (Si3N4) or zirconia (ZrO2) balls. Ceramic materials offer high stiffness, low density, and excellent resistance to corrosion and heat. Ceramic bearings are commonly used in high-speed and high-temperature applications, such as in aerospace and racing industries.
- Plastic (Polyamide, PEEK):
Plastic bearings are lightweight and offer good corrosion resistance. Polyamide bearings are commonly used due to their low friction and wear properties. Polyether ether ketone (PEEK) bearings provide high-temperature resistance and are suitable for demanding environments.
- Bronze:
Bronze bearings are often used in applications where self-lubrication is required. Bronze has good thermal conductivity and wear resistance. Bearings made from bronze are commonly used in machinery requiring frequent starts and stops.
- Hybrid Bearings:
Hybrid bearings combine steel rings with ceramic balls. These bearings offer a balance between the advantages of both materials, such as improved stiffness and reduced weight. Hybrid bearings are used in applications where high speeds and low friction are essential.
- Specialty Alloys:
For specific applications, specialty alloys may be used to meet unique requirements. For example, bearings used in extreme temperatures or corrosive environments may be made from materials like titanium or hastelloy.
- Coated Bearings:
Bearings may also be coated with thin layers of materials like diamond-like carbon (DLC) or other coatings to enhance performance, reduce friction, and improve wear resistance.
The choice of material depends on factors such as application requirements, operating conditions, load, speed, and environmental factors. Selecting the right material is essential for ensuring optimal bearing performance, longevity, and reliability in diverse industries and applications.
Are there any Industry Standards or Certifications that Ball Bearings should Meet?
Yes, there are several industry standards and certifications that ball bearings should meet to ensure their quality, performance, and reliability. These standards help manufacturers, engineers, and customers assess the suitability of bearings for specific applications. Some of the key standards and certifications for ball bearings include:
- ISO Standards:
The International Organization for Standardization (ISO) has developed a series of standards related to ball bearings. ISO 15 defines dimensions, boundary dimensions, and tolerances for radial bearings. ISO 281 specifies dynamic load ratings and calculation methods for bearings’ life calculations.
- ABEC (Annular Bearing Engineering Committee) Ratings:
ABEC ratings are commonly used in North America to indicate the precision and performance of ball bearings. Ratings range from ABEC 1 (lowest precision) to ABEC 9 (highest precision). However, it’s important to note that ABEC ratings focus primarily on dimensional tolerances and do not encompass all aspects of bearing quality.
- DIN Standards:
The German Institute for Standardization (Deutsches Institut für Normung, DIN) has published various standards related to ball bearings. DIN 625 covers dimensions for deep groove ball bearings, while DIN 616 provides guidelines for precision angular contact ball bearings.
- JIS (Japanese Industrial Standards):
JIS standards are used in Japan and internationally to define the characteristics and dimensions of various products, including ball bearings. JIS B 1512 outlines the classification and dimensions of rolling bearings.
- ASTM (American Society for Testing and Materials) Standards:
ASTM has standards that cover various aspects of bearing testing, performance, and materials. ASTM F2215, for instance, specifies the requirements for ball bearings used in surgical implants.
- CE Marking:
CE marking indicates that a product complies with European Union health, safety, and environmental requirements. It may be required for bearings used in machinery intended to be sold within the EU market.
- Industry-Specific Standards:
Various industries, such as aerospace, automotive, medical, and nuclear, have specific standards or certifications that bearings must meet to ensure safety, reliability, and compliance with industry-specific requirements.
- Quality Management Systems:
Manufacturers that adhere to quality management systems, such as ISO 9001, demonstrate their commitment to consistent product quality and customer satisfaction. Certification to these systems indicates that the manufacturing process follows established protocols and best practices.
When selecting ball bearings, it’s important to consider the relevant standards and certifications that align with the application’s requirements. This ensures that the bearings meet recognized quality and performance criteria, ultimately contributing to reliable and efficient operation.
What is a Ball Bearing and How does it Function in Various Applications?
A ball bearing is a type of rolling-element bearing that uses balls to reduce friction between moving parts and support radial and axial loads. It consists of an outer ring, an inner ring, a set of balls, and a cage that separates and maintains a consistent spacing between the balls. Here’s how ball bearings function in various applications:
- Reduction of Friction:
Ball bearings function by replacing sliding friction with rolling friction. The smooth, spherical balls minimize the contact area between the inner and outer rings, resulting in lower friction and reduced heat generation.
- Radial and Axial Load Support:
Ball bearings are designed to support both radial loads (forces perpendicular to the shaft’s axis) and axial loads (forces parallel to the shaft’s axis). The distribution of balls within the bearing ensures load-carrying capacity in multiple directions.
- Smooth Rotational Movement:
Ball bearings facilitate smooth and precise rotational movement. The rolling motion of the balls allows for controlled and continuous rotation with minimal resistance.
- Applications in Machinery:
Ball bearings are used in a wide range of machinery and equipment, including motors, generators, gearboxes, conveyors, and fans. They enable the efficient transfer of motion while reducing wear and energy losses.
- Automotive Industry:
Ball bearings are extensively used in automobiles for various applications, including wheel hubs, transmission systems, steering mechanisms, and engine components. They provide reliability and durability in challenging automotive environments.
- Industrial Machinery:
In industrial settings, ball bearings support rotating shafts and ensure the smooth operation of equipment such as pumps, compressors, and machine tools.
- High-Speed Applications:
Ball bearings are suitable for high-speed applications due to their low friction and ability to accommodate rapid rotation. They are used in applications like electric motors and aerospace components.
- Precision Instruments:
For precision instruments, such as watches, cameras, and medical devices, ball bearings provide accurate rotational movement and contribute to the overall performance of the instrument.
- Variety of Sizes and Types:
Ball bearings come in various sizes, configurations, and materials to suit different applications. Different types include deep groove ball bearings, angular contact ball bearings, thrust ball bearings, and more.
In summary, ball bearings are essential components in a wide range of applications where smooth rotation, load support, and reduced friction are critical. Their versatility, reliability, and efficiency make them indispensable in industries spanning from automotive to industrial machinery to precision instruments.
editor by CX 2024-01-11
China supplier Deep Groove Ball Bearing 608 6200 6201 6202 6203 6204 6205 6206 6207 6208 6302 6304 6305 6004 6005 bearing bronze
Product Description
DETA
ZheJiang Leicester Bearing Technology Co., Ltd. is a specialized manufacturer that produces various types of bearings, including cylindrical roller bearings (7 series, 97 series, 3007 series, 20097 series), British standard tapered roller bearings, deep groove ball bearings, spherical plain bearings, self-aligning roller bearings, rolling mill bearings, and a variety of non-standard bearings.
At our core, we believe in “Quality, Creating Value,” and we have gained the trust and support of customers both domestically and internationally by delivering high-quality products.
In 2002, we received certification from the China Import and Export Product Quality Verification Center and obtained ISO 9001, ISO 2000, and IATF 16949 quality management system certifications. Our successful collaborations with renowned domestic and international enterprises have made us reliable and stable suppliers. Moreover, we have provided bearing components to well-known bearing manufacturers worldwide.
PRODUCT OVERVIEW
| Eaaring No | Di d |
mension D |
(mm) B |
Mass(kg) | Bearing No | DI d |
mension D |
(mm) B |
Mass(kg) |
| 604 | 4 | 12 | 4.0 | 6212 | 60 | 110 | 22 | 0.780 | |
| 606 | 6 | 17 | 17.0 | 6213 | 65 | 120 | 23 | 0.990 | |
| 608 | 22 | 7.0 | 0.0080 | 8214 | 70 | 125 | 24 | 1.050 | |
| 623 | 3 | 10 | 4.0 | 0.571 | 6215 | 75 | 130 | 25 | 1.200 |
| 625 | 5 | 16 | 5.0 | 0.0050 | 6216 | 80 | 140 | 26 | 1.400 |
| 634 | 4 | 16 | 5.0 | 0.0050 | 6217 | 85 | 150 | 28 | 1.800 |
| 635 | 5 | 19 | 6.0 | 0.0080 | 6218 | 90 | 160 | 30 | 2.150 |
| 680 | 9 | 22 | 7.0 | 6219 | 95 | 170 | 32 | 2.600 | |
| 618/3 | 3 | 7 | 2.0 | 0.0003 | 6220 | 100 | 100 | 34 | 3.150 |
| 618/4 | 4 | 9 | 2.5 | 0.0006 | 6221 | 105 | 190 | 36 | 00 |
| 618/5 | 5 | 11 | 3.0 | 0.0120 | 6222 | 10 | 200 | 38 | 4.350 |
| 6000 | 10 | 26 | 8.0 | 0.0190 | 6300 | 10 | 35 | 11 | 0.053 |
| 6001 | 12 | 20 | 8.0 | 0.5710 | 6301 | 12 | 37 | 12 | 0.060 |
| 6002 | 15 | 32 | 9.0 | 0.0300 | 6302 | 15 | 42 | 13 | 0.082 |
| 6003 | 17 | 35 | 10.0 | 0.0390 | 6303 | 17 | 47 | 14 | 0.120 |
| 6004 | 20 | 42 | 120 | 0.0690 | 6304 | 20 | 52 | 15 | 0.140 |
| 6005 | 25 | 47 | 12.0 | 0.0800 | 6205 | 25 | 62 | 17 | 0.230 |
| 6006 | 30 | 55 | 13.0 | 0.1200 | 6306 | 30 | 72 | 19 | 0.3680 |
| 6007 | 35 | 62 | 14.0 | 0.1600 | 6207 | 35 | 80 | 21 | 0.460 |
| 6008 | 40 | 68 | 15.0 | 0.1900 | 6309 | 40 | 90 | 23 | 0.630 |
| 6009 | 45 | 75 | 16.0 | 0.2500 | 6309 | 45 | 100 | 25 | 0.830 |
| 6571 | 50 | 80 | 16.0 | 0.2600 | 6310 | 50 | 110 | 27 | 1.050 |
| 6011 | 55 | 90 | 18.0 | 0.3000 | 6311 | 55 | 120 | 29 | 1.350 |
| 6012 | 0 | 96 | 18.0 | 0.4200 | 6312 | 60 | 130 | 31 | 1.700 |
| 6013 | 65 | 100 | 18.0 | 0.4400 | 6313 | 65 | 140 | 33 | 2.100 |
| 6014 | 70 | 110 | 20.0 | 0.6000 | 6314 | 70 | 150 | 35 | 2.500 |
| 6015 | 75 | 115 | 20.0 | 0.6400 | 6315 | 75 | 160 | 37 | 3.000 |
| 6016 | 80 | 120 | 22.0 | 0.8500 | 6316 | 80 | 170 | 39 | 3.600 |
| 6017 | 85 | 130 | 22.0 | 0.8900 | 6217 | 85 | 180 | 41 | 4.260 |
| 6018 | 90 | 140 | 24.0 | 1.1500 | 6318 | 90 | 190 | 43 | 4.900 |
| 6019 | 95 | 145 | 24.0 | 1.2000 | 6319 | 95 | 200 | 45 | 5.650 |
| 6571 | 100 | 150 | 24.0 | 1.2500 | 6320 | 100 | 215 | 47 | 7.000 |
| 6571 | 105 | 160 | 26.0 | 16,000 | 6401 | 12 | 42 | 13 | 0.048 |
| 6571 | 110 | 170 | 28.0 | 1.9500 | 6402 | 15 | 52 | 15 | 0.137 |
| 6200 | 10 | 30 | 9.0 | 0.0320 | 6403 | 17 | 62 | 17 | 0.271 |
| 850 | 12 | 32 | 10.0 | 0.571 | 6404 | 20 | 72 | 19 | 0.408 |
| 6202 | 15 | 35 | 11.0 | 0.0450 | 6405 | 25 | 80 | 21 | 0.528 |
| 6203 | 17 | 40 | 12.0 | 0.0650 | 6406 | 30 | 90 | 23 | 0.720 |
| 6204 | 20 | 47 | 14.0 | 0.1100 | 6407 | 35 | 100 | 25 | 0.936 |
| 6205 | 25 | 52 | 15.0 | 0.1300 | 6408 | 40 | 110 | 27 | 1.200 |
| 6206 | 30 | 62 | 16.0 | 0.2000 | 6409 | 45 | 120 | 28 | 1.550 |
| 6207 | 35 | 72 | 17.0 | 0.2900 | 6410 | 50 | 130 | 31 | 1.910 |
| 6208 | 40 | 80 | 18.0 | 0.3700 | 6411 | 55 | 140 | 33 | 2.320 |
| 6209 | 45 | 85 | 19.0 | 0.4100 | 6412 | 60 | 150 | 35 | 2.790 |
| 6210 | 0 | 90 | 20.0 | 0.4600 | 6413 | 65 | 160 | 37 | 3.360 |
| 6211 | 55 | 100 | 21.0 | 0.6100 | 6414 | 70 | 180 | 42 | 5.000 |
| “Aval lable typas:apan,Z.ZZ,RS;2RS,N,ZN | |||||||||
Deep groove ball bearings are the most representative of rolling bearings, with simple structure, They are easy to use and versatile .
Such bearings are non-separabal bearings,the inner and outer rings are rolled into a ditch arc type. They can bear radial load and axial load,with low coefficient of friction,high limiting speed .They are suitable for high-spped,low noise ,low vibration cccasions.
Deep groove balll bearings are widely used in auto-mobiles,machinetools,motors,instrumentation,construction machinery,railway vehicles,agricultural machinery and various equipment in machinery industry.
Detailed Photos
OUR PRODUCTS
SCOPE OF APPLICATION
PRODUCTION PROCESS
PRODUCT PACKAGING
1.industrial packing+industrial cartons+pallets
2.single brand box+brand cartons+pallets
3.follow customer’s requests
A.Plastic Tubes or Single Boxes ( Usually 10pcs in 1 plastic tube for steel bearings);
B.Cartons ( No more than 30kg for 1 carton );
C. Pallet ( Usually more than 400kg totally will use pallet )
D. Delivery time :7-35 days ( by sea or by air )
Generally,We will choose the most suitable packing method for products. If you have any special requirements for packing, please contact us in advance.
Company Profile
“Reliable quality, competitive prices, and excellent service” have always been our guiding principles. We have implemented a stringent quality control system, starting from raw material procurement to product manufacturing. Our company boasts a strong technical team, well-equipped testing facilities, and a robust ability to develop new products. With a commitment to delivering high-quality products and maintaining a good reputation, we aim to earn the trust of more customers.
ZheJiang Leicester Bearing Technology Co., Ltd. warmly welcomes both new and existing customers for discussions, guidance, and collaboration. We are eager to establish direct sales partnerships with businesses in various industries, both within the country and internationally.
As we embrace our dreams and uphold our values, honesty remains the foundation of our company. ZheJiang Leicester Bearing Technology Co., Ltd. looks forward to creating a bright future together with you!
OUR STRENGTHS
Q1: Can I get some samples?
A: Yes, sample order is available for quality check and market test. But you have to pay the sample cost and express cost.
Q2: Do you receive customized order?
A: Yes, ODM & OEM are welcomed.
Q3: What’s the lead time?
A: According to the order quantity, small order usually need 3-5 days, big order need negotiation.
Q4: What’s your payment terms?
A: We receive Escrow, T/T, West Union, Cash and etc.
| Model No.: | Main Product Deep Groove Ball Bearing |
|---|---|
| Deliver Time: | 0-15days |
| Transport: | by Land or Sea or Air |
| Samples: |
US$ 0.1/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What are the Challenges Associated with Noise Reduction in Ball Bearings?
Noise reduction in ball bearings is a crucial consideration, especially in applications where noise levels must be minimized for operational efficiency and user comfort. While ball bearings are designed to operate smoothly, there are several challenges associated with reducing noise in their operation:
- Vibration:
Vibration generated by the movement of rolling elements and raceways can lead to noise. Even minor irregularities in bearing components or the mounting system can cause vibration that translates into audible noise.
- Bearing Type and Design:
The type and design of the ball bearing can impact noise generation. For example, deep groove ball bearings are known for their quiet operation, while angular contact bearings can generate more noise due to their higher contact angles.
- Lubrication:
Improper or inadequate lubrication can result in increased friction and wear, leading to noise. Choosing the right lubricant and maintaining proper lubrication levels are essential for reducing noise in ball bearings.
- Bearing Clearance and Preload:
Incorrect clearance or preload settings can lead to noise issues. Excessive clearance or inadequate preload can cause the rolling elements to impact the raceways, resulting in noise during rotation.
- Material and Manufacturing Quality:
The quality of materials and manufacturing processes can affect noise levels. Inconsistent or low-quality materials, improper heat treatment, or manufacturing defects can lead to noise generation during operation.
- Surface Finish:
The surface finish of the rolling elements and raceways can impact noise. Rough surfaces can generate more noise due to increased friction and potential irregularities.
- Sealing and Shielding:
Seals and shields that protect bearings can influence noise levels. While they are necessary for contamination prevention, they can also cause additional friction and generate noise.
- Operating Conditions:
External factors such as temperature, speed, and load can influence noise levels. High speeds or heavy loads can amplify noise due to increased stress on the bearing components.
- Wear and Deterioration:
As ball bearings wear over time, noise levels can increase. Worn components or inadequate lubrication can lead to more significant noise issues as the bearing operates.
To address these challenges and reduce noise in ball bearings, manufacturers and engineers employ various techniques, such as optimizing design, selecting suitable bearing types, using proper lubrication, maintaining accurate preload settings, and ensuring high-quality materials and manufacturing processes. Noise reduction efforts are essential to improve overall product quality, meet noise regulations, and enhance user experience in various applications.
Are there any Industry Standards or Certifications that Ball Bearings should Meet?
Yes, there are several industry standards and certifications that ball bearings should meet to ensure their quality, performance, and reliability. These standards help manufacturers, engineers, and customers assess the suitability of bearings for specific applications. Some of the key standards and certifications for ball bearings include:
- ISO Standards:
The International Organization for Standardization (ISO) has developed a series of standards related to ball bearings. ISO 15 defines dimensions, boundary dimensions, and tolerances for radial bearings. ISO 281 specifies dynamic load ratings and calculation methods for bearings’ life calculations.
- ABEC (Annular Bearing Engineering Committee) Ratings:
ABEC ratings are commonly used in North America to indicate the precision and performance of ball bearings. Ratings range from ABEC 1 (lowest precision) to ABEC 9 (highest precision). However, it’s important to note that ABEC ratings focus primarily on dimensional tolerances and do not encompass all aspects of bearing quality.
- DIN Standards:
The German Institute for Standardization (Deutsches Institut für Normung, DIN) has published various standards related to ball bearings. DIN 625 covers dimensions for deep groove ball bearings, while DIN 616 provides guidelines for precision angular contact ball bearings.
- JIS (Japanese Industrial Standards):
JIS standards are used in Japan and internationally to define the characteristics and dimensions of various products, including ball bearings. JIS B 1512 outlines the classification and dimensions of rolling bearings.
- ASTM (American Society for Testing and Materials) Standards:
ASTM has standards that cover various aspects of bearing testing, performance, and materials. ASTM F2215, for instance, specifies the requirements for ball bearings used in surgical implants.
- CE Marking:
CE marking indicates that a product complies with European Union health, safety, and environmental requirements. It may be required for bearings used in machinery intended to be sold within the EU market.
- Industry-Specific Standards:
Various industries, such as aerospace, automotive, medical, and nuclear, have specific standards or certifications that bearings must meet to ensure safety, reliability, and compliance with industry-specific requirements.
- Quality Management Systems:
Manufacturers that adhere to quality management systems, such as ISO 9001, demonstrate their commitment to consistent product quality and customer satisfaction. Certification to these systems indicates that the manufacturing process follows established protocols and best practices.
When selecting ball bearings, it’s important to consider the relevant standards and certifications that align with the application’s requirements. This ensures that the bearings meet recognized quality and performance criteria, ultimately contributing to reliable and efficient operation.
How do Ball Bearings Differ from Other Types of Bearings like Roller Bearings?
Ball bearings and roller bearings are two common types of rolling-element bearings, each with distinct designs and characteristics. Here’s a comparison of ball bearings and roller bearings:
- Design:
Ball Bearings: Ball bearings use spherical balls to separate and reduce friction between the bearing’s inner and outer rings. The balls enable rolling motion and smooth contact, minimizing friction.
Roller Bearings: Roller bearings, as the name suggests, use cylindrical or tapered rollers instead of balls. These rollers have larger contact areas, distributing loads over a broader surface.
- Friction and Efficiency:
Ball Bearings: Due to the point contact between the balls and the rings, ball bearings have lower friction and are more efficient at high speeds.
Roller Bearings: Roller bearings have a larger contact area, resulting in slightly higher friction compared to ball bearings. They are more suitable for heavy-load applications where efficiency is prioritized over high speeds.
- Load Capacity:
Ball Bearings: Ball bearings excel at handling light to moderate loads in both radial and axial directions. They are commonly used in applications where smooth rotation and low friction are important.
Roller Bearings: Roller bearings have a higher load-carrying capacity than ball bearings. They can support heavier radial and axial loads and are preferred for applications with significant loads or impact forces.
- Variability:
Ball Bearings: Ball bearings come in various designs, including deep groove, angular contact, and thrust ball bearings, each suitable for different applications.
Roller Bearings: Roller bearings have diverse types, including cylindrical, spherical, tapered, and needle roller bearings, each optimized for specific load and motion requirements.
- Speed Capability:
Ball Bearings: The reduced friction in ball bearings makes them suitable for high-speed applications, such as electric motors and precision machinery.
Roller Bearings: Roller bearings can handle higher loads but are generally better suited for moderate to low speeds due to slightly higher friction.
- Applications:
Ball Bearings: Ball bearings are used in applications where smooth motion, low friction, and moderate loads are essential, such as electric fans, bicycles, and some automotive components.
Roller Bearings: Roller bearings find applications in heavy machinery, construction equipment, automotive transmissions, and conveyor systems, where heavier loads and durability are crucial.
In summary, ball bearings and roller bearings differ in their design, friction characteristics, load capacities, speed capabilities, and applications. The choice between them depends on the specific requirements of the machinery and the type of loads and forces involved.
editor by CX 2023-11-06
China OEM Auto Bearing Price 6204 6205 6206 6207 6208 6209 6318 6305 Deep Groove Ball Bearing with Free Design Custom
Item Description
High Quality Deep Groove Ball Bearing
What can we supply?
one. OEM
2. Certified product
3. Technological support
4. Service
What merchandise can we supply?
Deep groove ball bearing with bore dimension from 10mm-110mm.
What is the attribute of Xihu (West Lake) Dis. deep groove ball bearing?
Competitive price tag
Substantial speed
Lower friction
Higher precision
Reduced maintainance
Primary item:
6000 sequence: 6001,6002, 6003, 6004, 6005, 6006, 6007, 6008, 6009, 6571, 6012, 6013, 6014, 6015
6200 series: 6200, 6201, 6202, 6203, 6204, 6205, 6206, 6207, 6208, 6209, 6210, 6211, 6212, 6213, 6214, 6215, 6216, 6217, 6218, 6219, 6220
6300 series: 6301, 6302, 6303, 6304, 6305, 6306, 6307, 6308, 6309, 6310 ,6311,6312,6313,6314,6315,6316,6317,6318,6319,6320
Benefits of Ball Bearings
What is a ball bearing? A ball bearing is a sort of rolling-factor bearing that utilizes balls to preserve separation between two bearing races. Its get in touch with angle among the balls and the races assists it decrease friction between the hundreds. There are many positive aspects to ball bearings, which includes their ability to face up to h2o. Study on to find out much more. Listed here are a number of of the rewards. You can use them in your every day existence, from your automobile to your boat.
Ball bearings lessen friction in between masses
Ball bearings decrease friction among masses by constraining the relative motion amongst relocating elements. These bearings consist of a ring of small metallic balls that lessen friction among relocating objects. The identify “ball bearing” is derived from the verb “to bear.” The lubricant within the bearing reduces friction amongst transferring particles. In a equipment, ball bearings decrease friction between shifting areas and improve linear movement close to a fixed axis.
These bearings are frequently utilised to lessen friction in between masses in rotating devices. They have two tracks, a single set to the rotating component and 1 stationary. The rolling balls of a ball bearing have decrease friction than flat surfaces. Since of this, they are helpful for bar stool bearings. They lessen friction in between surfaces and keep the separation amongst bearing races. Consequently, minimal surface make contact with is attainable. Ball bearings have the likely to enhance the existence of devices and lessen strength usage.
Ball bearings can be as modest as a wrist watch or as massive as an industrial motor. They function the same way, decreasing friction between masses. Amongst their many uses, ball bearings are vital for daily operations. Clocks, air conditioners, followers, and automobile axles all use ball bearings. In truth, anything that uses a motor calls for ball bearings. It truly is no surprise they’re attaining popularity in industries and each day existence.
They support radial and axial hundreds
Radial ball bearings are utilized primarily for radial masses, but they also have a ability for axial load. This load potential is generally given as a share of the radial load score. Axial load potential is normally greater for a bearing with a more substantial big difference in between the internal and outer ring diameters. The axial load capacity is also influenced by the bearing’s raceway depth, with shallow raceways being a lot more appropriate for heavier axial hundreds.
The two principal types of axial and radial hundreds are described by their orientation. Axial masses apply forces in 1 path even though radial hundreds act on the opposite course. In each instances, the bearing need to assistance the forces that are imposed. Axial loads use forces to a bearing in a one course, whilst radial loads utilize forces in the two instructions. No matter of the kind of load, axial and radial hundreds should be regarded as when selecting a bearing for a given application.
Angular and radial ball bearings vary in their resources. Radial ball bearings are created largely of by means of-hardened materials. They normally have a Rockwell hardness score of fifty eight Rc. The raceways and balls of these bearings are made of 440C stainless metal. They may possibly also contain shields and seals. SAE 52100 metal is the most common material for the raceway, whilst molybdenum steels are superb for higher temperatures.
They have a speak to angle between the balls and the races
When evaluating axial load bearings with their radial counterparts, the angular contact angle is a lot more crucial. Axial load bearings, have a get in touch with angle in between the balls and the races of 35 levels. They are appropriate for axial hundreds and a constrained radial load. The contact angle of these bearings is a end result of the shape of the internal and outer rings. Each rolling aspect will come into contact with the interior and outer rings only at one particular level, forming a thirty degree angle with the radial aircraft. The radial power of the axial load on these bearings is consequently enhanced by increasing the get in touch with angle amongst the balls and the races.
This contact angle decides the volume of friction in between the balls and the races, and makes it possible for angular get in touch with bearings to withstand large radial and thrust masses. In addition, the greater the contact angle, the increased the axial load help. Angular contact bearings come in common imperial (inch) and metric (mm) measurements. The angular speak to angle is decided by the free of charge radial engage in price and the curvature of the interior track.
They are h2o-resistant
In addition to their h2o-resistant traits, corrosion-resistant ball bearings can also defend in opposition to the harmful results of corrosive environments. Usually, standard metals, this kind of as steel, are susceptible to rust, which can considerably lessen their efficiency and increase the daily life of parts. Nonetheless, plastics, stainless metal, and ceramics can supply corrosion-resistant ball bearings. And since these materials are significantly a lot more sturdy, they offer you other benefits, these kinds of as being simple to preserve.
Amongst the benefits of plastic ball bearings is their substantial resistance to excessive temperatures, high speeds, and corrosion. Dependent on their development, plastic bearings are usually able to resist corrosion and anti-static qualities. They are light-weight and inexpensive in comparison to metal ball bearings. CZPT Revenue Corporation was set up in 1987 with a modest turnover of 4 lacs. As of the previous monetary year, it has grown to five hundred lacs in sales.
Other positive aspects of drinking water-resistant ball bearings consist of corrosion resistance, which is a important consideration in a lot of programs. Although stainless metal is highly corrosion-resistant, it decreases the bearing’s load-carrying capability. Also, corrosion-resistant deep groove ball bearings are normally produced with a specified internal clearance, which absorbs loss in clearance during mounting and shaft growth. This issue influences their overall performance, and if these are compromised, a alternative might be needed.
They are challenging
A handful of things make ball bearings tough: they’re created of true supplies, which signifies that they have inherent imperfections. Grade-1 balls are made specially for substantial-tension apps, this sort of as Formulation A single engines. Grade-3 balls, on the other hand, strike the ideal harmony amongst overall performance and price. Ceramic balls, for instance, are manufactured to spin at a large fee of four hundred RPM, and they are completed with a mirror finish.
A steel carbon ball bearing is one particular of the hardest forms of ball bearings accessible. The content is exceptionally sturdy, but the make contact with amongst the balls isn’t the ideal. Minimal-carbon steel is ideal for linear shafting and is typically coated with a polymer to prevent injury. Steel ball bearings with reasonable quantities of carbon are difficult, durable, and h2o-resistant. They’re best for gears, but their substantial-carbon steel counterparts are especially challenging and can resist corrosion.
A ceramic ball bearing is one more alternative. This variety has metal interior and outer rings but ceramic balls. Ceramic balls can endure greater temperatures than metal and are also electrically insulating. Ceramic ball bearings also have a tendency to be lighter and are more resistant to wear and tear. They’re also best for programs in which grease is not an selection, this kind of as in area shuttles. Even with the simple fact that ceramic ball bearings are tough, they are even now less expensive than metal ball bearings.
They are conductive
You could have read the time period “ball bearing” if you have examined introductory physics. What does that suggest? In essence, ball bearings are conductive due to the fact of their capacity to conduct electric power. This potential is mirrored in the charge distribution on the surface of the ball. Constructive charges are drawn towards the good plate, even though negative costs are drawn away from the positively billed ball bearing. You may possibly have even noticed a ball bearing in action.
Nevertheless, even with their conductive mother nature, ball bearings can nevertheless turn into ruined by electrical discharge. A larger voltage can lead to the balls to pit, and the raceways to become uneven. These uneven surfaces will 1st display up as too much sound, and ultimately result in the bearing to malfunction. Luckily, engineers have located a way to counter this problem: conductive grease. This grease permits existing to movement via the ball bearing, preventing the two heat and voltage buildup.
The distinction among metal and ceramic ball bearings is their density. Metal bearings are more conductive than glass or hybrid ceramics. Steel ball bearings have an even grain structure and are conductive for resonance circulation. When moving rapidly, the air bordering the metal ball bearing carries resonance from the inner ring to the outer. This can make them excellent for higher-pace resonance transfer. In addition to getting conductive, glass microbeads are harder and lighter than metal.
They are employed in pulley systems
Pulley systems use ball bearings to shift the sprocket, which is a wheel that rotates. These bearings are put in on the middle mounting gap of the pulley wheel. They shield the total program from heat, while enabling increased pace and smooth procedure. They distribute the fat of the load evenly, minimizing friction and wobbling, and make certain a clean rotation. Ball bearings are typically produced from steel and are put in within the pulley wheel.
The minute of inertia and bearing friction are measured to in ten % accuracy. These two variables impact the velocity of the pulley technique, which can guide to crashes if the weight holders are not balanced. For that reason, ball bearings are used to minimize the likelihood of this kind of crashes. When you want to know much more about ball bearings in pulley programs, right here are the benefits they supply.
Yet another advantage of ball bearings in pulley methods is that they have decrease friction than their strong counterparts. In get to minimize friction, even so, ball bearings must be produced of good components. Some of the widespread ball supplies are substantial-good quality plastics and stainless steel. Great components and clever block layout are vital to reducing friction. If you are preparing to use ball bearings in your pulley technique, verify out the adhering to suggestions and make sure you are choosing the correct one particular for your software.
