Tag Archives: china bearing bearing

China high quality 6801-RS 12215mm Single Row Thin-Walled Deep Groove Ball Bearings for Mechanical Equipment carrier bearing

Product Description

6800 series deep groove ball bearings

Product Description

Deep Groove Ball Bearings

Deep groove ball bearing
This is the most widely used ball bearing type. Trapped between the 2 races is a ring of balls that transmit the load and allows rotational motion between the 2 races. The balls are held in place by a retainer.

They have very low rolling friction and are optimized for low noise and low vibration. This makes them ideal for high-speed applications.

They are comparatively easy to install and require minimal maintenance. Care must be taken during installation to prevent denting of the races as they have to be push fit CZPT shafts.6800 series deep groove ball bearings

Detailed Photos

Product Parameters

No.	Size										Rated load		Weight
	Inner Diameter		Out Diameter		Width (B)				Chamfering		Dynamic	Static	Weight
	d		D		Open Type		Shielded Type		rsmin (r)		Cr	Cr	Close
	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	N	N	KG
603	3	0.1181	9	0.3543	3	0.1181	5	0.1181	0.2	0.008	486	223	0.0014
604	4	0.1575	12	0.4724	4	0.1575	4	0.1575	0.2	0.008	960	350	0.571
605	5	0.1969	14	0.5512	5	0.1969	5	0.1969	0.2	0.008	1070	420	0.0037
606	6	0.2362	17	0.6693	6	0.2362	6	0.2362	0.3	0.012	1960	730	0.0069
607	7	0.2756	19	0.7480	6	0.2362	6	0.2362	0.3	0.012	2800	1060	0.0082
608	8	0.3150	22	0.8661	7	0.2756	7	0.2756	0.3	0.012	3290	1360	0.0129
609	9	0.3543	24	0.9449	7	0.2756	7	0.2756	0.3	0.012	3330	1410	0.0160
6000	10	0.3937	26	1.5716	8	0.3150	8	0.3150	0.3	0.012	4160	1780	0.0190
6001	12	0.4724	28	1.1571	8	0.3150	8	0.3150	0.3	0.012	5110	2380	0.5710
6002	15	0.5906	32	1.2598	9	0.3543	9	0.3543	0.3	0.012	5590	2840	0.0300
6003	17	0.6693	35	1.3780	10	0.3937	10	0.3937	0.3	0.012	6000	3250	0.0390
6004	20	0.7874	42	1.6535	12	0.4724	12	0.4724	0.6	0.571	9390	5571	0.0690
6005	25	0.9843	47	1.8504	12	0.4724	12	0.4724	0.6	0.571	10060	5860	0.0800
6006	30	1.1811	55	2.1654	13	0.5118	13	0.5118	1	0.039	11900	7460	0.1160
6007	35	1.3780	62	2.4409	14	0.5512	14	0.5512	1	0.039	16210	10420	0.1150
6008	40	1.5748	68	2.6677	15	0.5906	15	0.5906	1	0.039	17030	11700	0.1920
6009	45	1.7717	75	2.9528	16	0.6299	16	0.6299	1	0.039	21080	14780	0.2450
6571	50	1.9685	80	3.1496	16	0.6299	16	0.6299	1	0.039	22000	16260	0.2610
60/22	22	0.8661	44	1.7323	12	0.4724	12	0.4724	0.6	0.571	9400	5050	0.0740
60/28	28	1.1571	52	2.571	12	0.4724	12	0.4724	0.6	0.571	12500	7400	0.0980
60/32	32	1.2598	58	2.2835	13	0.5118	13	0.5118	1	0.039	15100	9150	0.1290

No.	Size										Rated load		Weight
	Inner Diameter		Out Diameter		Width (B)				Chamfering		Dynamic	Static	Weight
	d		D		Open Type		Shielded Type		rsmin (r)		Cr	Cr	Close
	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	N	N	KG
623	3	0.1181	10	0.3937	4	0.1575	4	0.1575	0.15	0.006	640	220	0.0016
624	4	0.1575	13	0.5118	5	0.1969	5	0.1969	0.2	0.008	1150	400	0.0032
625	5	0.1969	16	0.6299	5	0.1969	5	0.1969	0.3	0.012	1880	680	0.0051
626	6	0.2362	19	0.7480	6	0.2362	6	0.2362	0.3	0.012	2800	1060	0.
627	7	0.2756	22	0.8661	7	0.2756	7	0.2756	0.3	0.012	3290	1360	0.0131
628	8	0.3150	24	0.9449	8	0.3150	8	0.3150	0.3	0.012	3330	1410	0.0170
629	9	0.3543	26	1.5716	8	0.3150	8	0.3150	0.3	0.012	4160	1780	0.0191
6200	10	0.3937	30	1.1811	9	0.3543	9	0.3543	0.6	0.571	5110	2380	0.0320
6201	12	0.4724	32	1.2598	10	0.3937	10	0.3937	0.6	0.571	6180	3060	0.571
6202	15	0.5906	35	1.3780	11	0.4331	11	0.4331	0.6	0.571	7450	3700	0.0450
6203	17	0.6693	40	1.5748	12	0.4724	12	0.4724	0.6	0.571	9560	4780	0.0650
6204	20	0.7874	47	1.8504	14	0.5512	14	0.5512	1	0.039	12840	6650	0.1060
6205	25	0.9843	52	2.571	15	0.5906	15	0.5906	1	0.039	14571	7930	0.1280
6206	30	1.1811	62	2.4409	16	0.6299	16	0.6299	1	0.039	19460	11310	0.1990
6207	35	1.3780	72	2.8346	17	0.6693	17	0.6693	1.1	0.043	25670	15300	0.2880
6208	40	1.5748	80	3.1496	18	0.7087	18	0.7087	1.1	0.043	29520	18140	0.3660

No.	Size										Rated load		Weight
	Inner Diameter		Out Diameter		Width (B)				Chamfering		Dynamic	Static	Weight
	d		D		Open Type		Shielded Type		rsmin (r)		Cr	Cr	Close
	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	N	N	KG
633	3	0.1181	13	0.5118	5	0.1969	5	0.1969	0.2	0.008	1300	485	0.0034
634	4	0.1575	16	0.6299	5	0.1969	5	0.1969	0.3	0.012	1880	680	0.0054
635	5	0.1969	19	0.7480	6	0.2362	6	0.2362	0.3	0.012	2810	1060	0.0089
636	6	0.2362	22	0.8661	7	0.2756	7	0.2756	0.3	0.012	3290	1360	0.0145
637	7	0.2756	26	1.5716	9	0.3543	9	0.3543	0.3	0.012	3340	1410	0.5718
638	8	0.3150	28	1.1571	9	0.3543	9	0.3543	0.3	0.012	4160	1780	0.0303
639	9	0.3543	30	1.1811	10	0.3937	10	0.3937	0.6	0.571	5120	2390	0.571
6300	10	0.3937	35	1.3780	11	0.4331	11	0.4331	0.6	0.571	7640	3470	0.571
6301	12	0.4724	37	1.4567	12	0.4724	12	0.4724	1	0.039	9700	4190	0.0600
6302	15	0.5906	42	1.6535	13	0.5118	13	0.5118	1	0.039	11400	5430	0.0820
6303	17	0.6693	47	1.8504	14	0.5512	14	0.5512	1	0.039	13580	6580	0.1150
6304	20	0.7874	52	2.0742	15	0.5906	15	0.5906	1.1	0.043	15940	7880	0.1490
6305	25	0.9843	62	2.4409	17	0.6693	17	0.6693	1.1	0.043	22380	11490	0.2320
6306	30	1.1811	72	2.8346	19	0.7480	19	0.7480	1.1	0.043	27000	15200	0.3490
63/22	22	0.8661	56	2.2047	16	0.6299	16	0.6299	1.1	0.043	18400	9250	0.1760
63/28	28	1.1571	68	2.6772	18	0.7087	18	0.7087	1.1	0.043	26800	14000	0.2870
63/32	32	1.2598	75	2.9528	20	0.7874	20	0.7874	1.1	0.043	30000	16200	0.3820

No.	Size										Rated load		Weight
	Inner Diameter		Out Diameter		Width (B)				Chamfering		Dynamic	Static	Weight
	d		D		Open Type		Shielded Type		rsmin (r)		Cr	Cr	Close
	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	N	N	KG
683	3	0.1181	7	0.2756	2	0.0787	3	0.1181	0.1	0.004	420	135	0.571
684	4	0.1575	9	0.3543	2.5	0.0984	4	0.1575	0.1	0.004	480	170	0.571
685	5	0.1969	11	0.4331	3	0.1181	5	0.1969	0.15	0.006	770	320	0.0019
686	6	0.2362	13	0.5118	3.5	0.1378	5	0.1969	0.15	0.006	1080	440	0.0571
687	7	0.2756	14	0.5512	3.5	0.1378	5	0.1969	0.15	0.006	1170	510	0.0030
688	8	0.3150	16	0.6299	4	0.1575	5	0.1969	0.2	0.008	1250	590	0.0038
689	9	0.3543	17	0.6693	4	0.1575	5	0.1969	0.2	0.008	1330	660	0.0440
6800	10	0.3937	19	0.7480	5	0.1969	5	0.1969	0.3	0.012	1590	750	0.0050
6801	12	0.4724	21	0.8268	5	0.1969	5	0.1969	0.3	0.012	1910	1040	0.0060
6802	15	0.5906	24	0.9449	5	0.1969	5	0.1969	0.3	0.012	2070	1250	0.0070
6803	17	0.6693	26	1.5716	5	0.1969	5	0.1969	0.3	0.012	2130	1360	0.0080
6804	20	0.7874	32	1.2598	7	0.2756	7	0.2756	0.3	0.012	3480	2230	0.0190
6805	25	0.9843	37	1.4567	7	0.2756	7	0.2756	0.3	0.012	3680	2630	0.5710
6806	30	1.1811	42	1.6535	7	0.2756	7	0.2756	0.3	0.012	4000	3150	0.0260
6807	35	1.3780	47	1.8504	7	0.2756	7	0.2756	0.3	0.012	4270	3600	0.5710
6808	40	1.5748	52	2.571	7	0.2756	7	0.2756	0.3	0.012	4410	3890	0.0330
6809	45	1.7717	58	2.2835	7	0.2756	7	0.2756	0.3	0.012	4590	4330	0.0400
6810	50	1.9685	65	2.5591	7	0.2756	7	0.2756	0.3	0.012	6610	6080	0.0520
6811	55	2.1654	72	2.3846	9	0.3543	9	0.3543	0.3	0.012	8530	8080	0. 0571
6812	60	2.3622	78	3.0709	10	0.3937	10	0.3937	0.3	0.012	9200	8760	0.1060
6813	65	2.5591	85	3.3465	10	0.3937	10	0.3937	0.6	0.571	1571	9420	0.1250
6814	70	2.7559	90	3.5433	10	0.3937	10	0.3937	0.6	0.571	1571	10090	0.1350
6815	75	2.9528	95	3.7402	10	0.3937	10	0.3937	0.6	0.571	11230	1571	0.1450
6816	80	3.1496	100	3.9370	10	0.3937	10	0.3937	0.6	0.571	11320	11080	0.1550
6817	85	3.3465	110	4.3307	13	0.5118	13	0.5118	1	0.039	17599	18300	0.2650
6818	90	3.5433	115	4.5276	13	0.5118	13	0.5118	1	0.039	17853	18961	0.2800

No.	Size										Rated load		Weight
	Inner Diameter		Out Diameter		Width (B)				Chamfering		Dynamic	Static	Weight
	d		D		Open Type		Shielded Type		rsmin (r)		Cr	Cr	Close
	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	N	N	KG
6819	95	3.7402	120	4.7244	13	0.5118	13	0.5118	1	0.0390	18089	19616	0.2980
6820	100	3.9370	125	4.9213	13	0.5118	13	0.5118	1	0.0390	18340	20266	0.3110
6821	105	4.1339	130	5.1181	13	0.5118	13	0.5118	1	0.0390	18912	20924	0.3250
6822	110	4.3307	140	5.5118	16	0.6299	16	0.6299	1	0.0390	28100	30700	0.5100
6824	120	4.7244	150	5.9055	16	0.6299	16	0.6299	1	0.0390	28900	32900	0.5490
6826	130	5.1181	165	6.4961	18	0.7087	18	0.7087	1.1	0.0430	37900	42900	0.7900
6828	140	5.1181	175	6.8898	18	0.7087	18	0.7087	1	0. 0571	38200	44300	0.9900
6830	150	5.9055	190	7.4803	20	0.7874	20	0.7874	1	0. 0571	49100	57100	1.5000
6832	160	6.2992	200	7.8740	20	0.7874	20	0.7874	1	0. 0571	49600	59100	1.7000
6834	170	6.6929	215	8.4646	22	0.8661	22	0.8661	1	0. 0571	61500	73300	1.9000
6836	180	7.0866	225	8.8582	22	0.8661	22	0.8661	1	0. 0571	62300	75900	2.0000
6838	190	7.4803	240	9.4480	24	0.9449	24	0.9449	1.5	0.0590	75100	91600	2.1000
6840	200	7.8740	250	9.8425	24	0.9449	24	0.9449	1.5	0.0590	74200	91200	2.3800
6844	220	8.6614	270	10.6299	24	0.9499	–	–	1.5	0.0590	76400	97800	2.7900
6848	240	9.4488	300	11.8110	28	1.1571	–	–	2	0.0787	83500	108000	4.5000
6852	260	10.2362	320	12.5984	28	1.1571	–	–	2	0.0787	95000	128000	4.8500
6856	280	11.5716	350	13.7795	33	1.2992	–	–	2	0.0787	135000	178000	7.6000
6860	300	11.8110	380	14.9606	38	1.4960	–	–	2	0.0787	162000	222000	11.0000
6864	320	12.5984	400	15.7480	38	1.4960	–	–	2	0.0787	168000	235000	12.0000
6872	360	14.1732	440	17.3228	38	1.4960	–	–	2.5	0.0984	–	–	12.2000
6876	380	14.9606	480	18.8976	46	1.8110	–	–	2.5	0.0984	168000	235000	20.5000
6880	400	15.7480	500	19.6850	46	1.8110	–	–	2.5	0.0984	–	–	21.7000
6884	420	16.5354	520	20.4724	46	1.8110	–	–	2.5	0.1377	251000	425000	22.0000
6888	440	17.3228	540	21.2598	46	1.8110	–	–	2.5	0.0984	–	–	24.0000
6892	460	18.1102	580	22.8346	56	2.2047	–	–	3	0.1181	–	–	33.5000

No.	Size										Rated load		Weight
	Inner Diameter		Out Diameter		Width (B)				Chamfering		Dynamic	Static	Weight
	d		D		Open Type		Shielded Type		rsmin (r)		Cr	Cr	Close
	mm	inch	mm	inch	mm	inch	mm	inch	mm	inch	N	N	KG
693	3	0.1181	8	0.3150	3	0.1181	4	0.1575	0.15	0.006	430	170	0.0008
694	4	0.1575	11	0.4331	4	0.1575	4	0.1575	0.15	0.006	960	350	0.0017
695	5	0.1969	13	0.5118	4	0.1575	4	0.1575	0.2	0.008	1070	420	0.571
696	6	0.2362	15	0.5906	5	0.1969	5	0.1969	0.2	0.008	1470	600	0.0036
697	7	0.2756	17	0.6693	5	0.1969	5	0.1969	0.3	0.012	1600	710	0.0050
698	8	0.3150	19	0.7480	6	0.2362	6	0.2362	0.3	0.012	2230	910	0.0076
699	9	0.3543	20	0.7874	6	0.2362	6	0.2362	0.3	0.012	2480	1090	0.0085
6900	10	0.3937	22	0.8661	6	0.2362	6	0.2362	0.3	0.012	2690	1270	0.5710
6901	12	0.4724	24	0.9449	6	0.2362	6	0.2362	0.3	0.012	2890	1460	0.0120
6902	15	0.5906	28	1.1571	7	0.2756	7	0.2756	0.3	0.012	4320	2250	0.0180
6903	17	0.6693	30	1.1811	7	0.2756	7	0.2756	0.3	0.012	4590	2550	0.0190
6904	20	0.7874	37	1.4567	9	0.3543	9	0.3543	0.3	0.012	6370	3680	0.0380
6905	25	0.9843	42	1.6535	9	0.3543	9	0.3543	0.3	0.012	6660	4180	0.0440
6906	30	1.1811	47	1.8504	9	0.3543	9	0.3543	0.3	0.012	7240	5571	0.0500
6907	35	1.3780	55	2.1654	10	0.3543	10	0.3937	0.6	0.571	10390	7160	0.7500
6908	40	1.5748	62	2.4409	12	0.3937	12	0.4724	0.6	0.571	13571	9200	0.1180
6909	45	1.7717	68	2.6772	12	0.4724	12	0.4724	0.6	0.571	13490	10130	0.1280
6910	50	1.9685	72	2.8346	12	0.4724	12	0.4724	0.6	0.571	13900	1571	0.1330
6911	55	2.1654	80	3.1496	13	0.4724	13	0.5118	1	0.039	14820	12690	0.1770
6912	60	2.3622	85	3.3465	13	0.5118	13	0.5118	1	0.039	15080	13480	0.1910
6913	65	2.5591	90	3.5433	13	0.5118	13	0.5118	1	0.039	19950	17490	0.2000
6914	70	2.7559	100	3.9370	16	0.6299	16	0.6299	1	0.039	25950	21850	0.3270
6915	75	2.9528	105	4.1339	16	0.6299	16	0.6299	1	0.039	26780	23560	0.3450
6916	80	3.1496	110	4.3307	16	0.6299	16	0.6299	1	0.039	27590	25280	0.3630
6917	85	3.3465	120	4.7244	18	0.7087	18	0.7087	1.1	0.043	31900	29700	0.5170

Product Applications

Company Profile

ZheJiang Jieyi Bearing Co., Ltd. is a more than 10-year history of bearing trading company. We are located in the biggest bearing town in China–Yiandian Town.

Our products include: Deep Groove Ball Bearings, Self-aligning Ball Bearings, Spherical Bearings, Tapered Roller Bearings, Cylindrical Roller Bearings, Needle Roller Bearings, Self-aligning Roller Bearings, Angular Contact Ball Bearings, Thrust Ball Bearings, Trust Roller Bearings and Special Bearings.

Jieyi Bearing has advanced quality testing and inspecting equipment, to guarantee product quality meets customers’ demand. Annually our company′ S export over 10 million dollars.

To service dear customers at the fastest speed, we built a great Warehouse to stock bearings, so as to ship your required bearings fast. Inside of the bearing warehouse, there is all sourcing of bearing stock, with all kinds of bearings, over 10000 types.

Jieyi Bearing also provides OEM service, such as bearing quality, noise level, grease brand, packing method, etc. We have enough OEM experience, and have a complete OEM manual for customer reference.

Products have been selling well in the American, French, Spanish, Austria, Italian, the U. A. E. Saudi, Pakistan, India, and Brizal markets.

With over 10 years′ Experience in bearings market, Jieyi Bearing have built up good relationship with all of our customers and quality factory. We always get satisfactory feedback from our customers because of the high quality products and good OEM service. We always supply the quality, stable, economical bearings and proper technical services.

Welcome to people of various enterprises with advance!

Our Advantages

WHY CHOOSE US?

1. BETTER COMMUNICATION

JVZB Bearing understands customer service more so than factories, we focus entirely on the customer so it is often easier to communicate with you.

2. FAVORABLE PRICING

JVZB Beaing often uses factories that are not big enough to have their own international sales team or export license. This means: we can work with factories that have lower prices than some easy-to-find competitors online.

3. LOW MOQ

We have great relationships with factories or have product stock on hand, CZPT to offer lower order quantities for the small sized importer.

4. SUPPLIER VERIFICATION

JVZB Bearing have more than 10 years of long-standing relationships with the factories, so we are aware of the capabilities of each. If you need, we can visit the factory to carry out product inspections and check up on an order.

5. QC CONTROL

JVZB Bearing have our own quality inspection laboratory with advanced testing equipment, we are CZPT to reasonably ensure the quality of the finished products.

6. MULTIPLE VARIETY PURCHASE

In fact, bearing factories usually only produce 1 type of bearing, or even focus on producing several models. If you want multiple items sourced for 1 product, we can help. This is a great way to source more products and do so quickly and efficiently.

7. OEM or OEM SERVICE

If you need special package or special labeling, we are glad to support OEM or OEM service.

Product List

Deeo Groove Ball Bearing

Spherical Roller Bearing

Taper Roller Bearing

Needle Roller Bearing

Pillow Block Bearing

Ceramic Bearing

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rolling Body:	Ball Bearings
The Number of Rows:	Single
Outer Dimension:	Small (28-55mm)

Samples:	US$ 0.1/Piece 1 Piece(Min.Order) \| Order Sample Ball bearings

Customization:	Available \| Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

ball bearing

Are there Specific Maintenance Practices to Ensure the Longevity of Ball Bearings?

Maintaining ball bearings is essential to ensure their longevity, reliable performance, and prevent premature failure. Proper maintenance practices can extend the lifespan of ball bearings and the equipment they are used in. Here are specific maintenance practices to consider:

Regular Lubrication:

Implement a regular lubrication schedule using the appropriate lubricant for the application. Lubrication reduces friction, prevents wear, and helps dissipate heat. Follow manufacturer guidelines for lubricant type, quantity, and frequency.

Clean Environment:

Keep the operating environment clean and free from contaminants. Dust, dirt, and debris can infiltrate bearings and cause damage. Use seals or shields to protect bearings from contaminants, especially in harsh environments.

Proper Installation:

Ensure correct installation of bearings using proper tools and techniques. Improper installation can lead to misalignment, uneven load distribution, and premature wear. Follow manufacturer recommendations for installation procedures.

Regular Inspections:

Perform routine visual inspections to check for signs of wear, damage, or contamination. Regular inspections can help identify issues early and prevent further damage. Pay attention to noise, vibration, and temperature changes.

Temperature Monitoring:

Monitor bearing temperatures during operation using infrared thermometers or sensors. Abnormal temperature increases can indicate inadequate lubrication, misalignment, or other problems.

Correct Handling:

Handle bearings with care to prevent damage during storage, transportation, and installation. Avoid dropping or subjecting them to impacts that can affect their internal components.

Bearing Removal and Replacement:

Follow proper procedures when removing and replacing bearings. Use appropriate tools and techniques to avoid damage to the bearing or the surrounding components.

Alignment Maintenance:

Maintain proper shaft and housing alignment to prevent excessive loads and wear on the bearing. Misalignment can lead to increased stress and premature failure.

Training and Education:

Provide training to operators and maintenance personnel on proper bearing maintenance and handling practices. Educated personnel are more likely to identify issues and perform maintenance correctly.

Documented Records:

Keep records of maintenance activities, inspections, lubrication schedules, and any issues encountered. This documentation helps track the bearing’s performance over time and informs future maintenance decisions.

By implementing these maintenance practices, you can ensure the longevity of ball bearings, minimize downtime, reduce operational costs, and maintain the reliability of the equipment they are a part of.

ball bearing

What Precautions should be taken to Prevent Contamination of Ball Bearings in Industrial Settings?

Preventing contamination of ball bearings is essential to ensure their proper function, longevity, and overall performance in industrial settings. Contaminants such as dust, dirt, debris, and particles can significantly impact bearing operation. Here are important precautions to take to prevent contamination of ball bearings:

Effective Sealing:

Choose ball bearings with appropriate seals or shields to prevent the ingress of contaminants. Seals provide a physical barrier against dust, moisture, and particles, ensuring the bearing’s interior remains clean.

Clean Environment:

Maintain a clean working environment around the machinery and equipment. Regularly clean the surrounding areas to prevent the accumulation of dirt and debris that could enter the bearings.

Proper Handling:

Handle bearings with clean hands and use gloves if necessary. Avoid touching the bearing surfaces with bare hands, as natural skin oils can transfer contaminants onto the bearing.

Clean Tools and Equipment:

Use clean tools and equipment during installation and maintenance to prevent introducing contaminants. Ensure that tools are properly cleaned before coming into contact with the bearing components.

Contamination-Controlled Workstations:

Establish contamination-controlled workstations for bearing handling, installation, and maintenance. These areas should have proper ventilation, filtered air, and minimal exposure to external contaminants.

Proper Lubrication:

Use the correct lubricant in appropriate quantities. Lubricants help create a barrier against contaminants and reduce friction. Regularly inspect and replenish lubrication to maintain its effectiveness.

Regular Inspections:

Implement a routine inspection schedule to monitor the condition of the bearings. Look for signs of contamination, wear, and damage. Address any issues promptly to prevent further damage.

Training and Education:

Train personnel on proper handling, installation, and maintenance practices to minimize the risk of contamination. Educated employees are more likely to take precautions and prevent accidental contamination.

Environmental Controls:

In sensitive environments, such as clean rooms or medical facilities, implement strict environmental controls to minimize the presence of contaminants that could affect bearing performance.

Regular Cleaning and Maintenance:

Perform regular cleaning and maintenance of machinery and equipment to prevent the buildup of contaminants. Keep bearings protected during maintenance to prevent debris from entering during the process.

Selection of Suitable Bearings:

Choose bearings that are specifically designed for the application’s environmental conditions. Some bearings have advanced sealing options or specialized coatings that enhance contamination resistance.

By implementing these precautions, industries can significantly reduce the risk of contamination in ball bearings, ensuring smooth operation, extended bearing life, and enhanced equipment reliability.

ball bearing

How does Lubrication Impact the Performance and Lifespan of Ball Bearings?

Lubrication plays a critical role in the performance and lifespan of ball bearings. Proper lubrication ensures smooth operation, reduces friction, minimizes wear, and prevents premature failure. Here’s how lubrication impacts ball bearings:

Friction Reduction:

Lubrication creates a thin film between the rolling elements (balls) and the raceways of the bearing. This film reduces friction by separating the surfaces and preventing direct metal-to-metal contact. Reduced friction results in lower energy consumption, heat generation, and wear.

Wear Prevention:

Lubricants create a protective barrier that prevents wear and damage to the bearing’s components. Without proper lubrication, the repeated rolling and sliding of the balls against the raceways would lead to accelerated wear, surface pitting, and eventual failure.

Heat Dissipation:

Lubricants help dissipate heat generated during operation. The rolling elements and raceways can generate heat due to friction. Adequate lubrication carries away this heat, preventing overheating and maintaining stable operating temperatures.

Corrosion Resistance:

Lubrication prevents moisture and contaminants from coming into direct contact with the bearing’s surfaces. This helps protect the bearing against corrosion, rust, and the formation of debris that can compromise its performance and longevity.

Noise Reduction:

Lubricated ball bearings operate quietly because the lubricant cushions and dampens vibrations caused by the rolling motion. This noise reduction is crucial in applications where noise levels need to be minimized.

Seal Protection:

Lubricants help maintain the effectiveness of seals or shields that protect the bearing from contaminants. They create a barrier that prevents particles from entering the bearing and causing damage.

Improved Efficiency:

Properly lubricated ball bearings operate with reduced friction, leading to improved overall efficiency. This is especially important in applications where energy efficiency is a priority.

Lifespan Extension:

Effective lubrication significantly extends the lifespan of ball bearings. Bearings that are properly lubricated experience less wear, reduced fatigue, and a lower likelihood of premature failure.

Selection of Lubricant:

Choosing the right lubricant is essential. Factors such as speed, temperature, load, and environmental conditions influence the choice of lubricant type and viscosity. Some common lubricant options include grease and oil-based lubricants.

Regular Maintenance:

Regular lubrication maintenance is crucial to ensure optimal bearing performance. Bearings should be inspected and relubricated according to manufacturer recommendations and based on the application’s operating conditions.

In summary, proper lubrication is essential for the optimal performance, longevity, and reliability of ball bearings. It reduces friction, prevents wear, dissipates heat, protects against corrosion, and contributes to smooth and efficient operation in various industrial and mechanical applications.

China high quality 6801-RS 12*21*5mm Single Row Thin-Walled Deep Groove Ball Bearings for Mechanical Equipment carrier bearing
editor by CX 2024-05-14

China OEM FM Bearings for All Kinds of Transmissions 6400 62200 6317 6309 6325 6000 C3 Ball Bearings bearing distributors

Product Description

WHY CHOOSE E-ASIA BEARING?

1) 20 years of rich bearing industry export experience
2) ISO & MPA & CE & SGS & BV certified
3) Professional engineers team and Superior machines
4) 1 hour to HangZhou port or ZheJiang port
5) Strict quality inspection (3 steps) before shipment, such as SGS/BV third party certified.

CHOOSE E-ASIA REFUSED ONE TIME BUSINESS

Thrust Roller Bearings

81series

81102 81103 81104 81105 81106 81107 81108 81109 81110 81111 81112 81113 81114 81115 81116 81117 81118 81120 81122 81124 81126 81128 81130 81132 81134 81136 81138 81140 81144 81148 81152 81156 81160 81164 81168 81172 81176 81180 81184 81188 81192 81196 811/5 110145 120155 130170 140180 150190 165710

Company Profile

E-Asia was set up in 1996 and located at HangZhou, a beautiful city in China. Our company is bearing manufacturer and NSK CZPT CZPT CZPT CZPT HRB LYC NACHI C&U bearing distributor. We also provide OEM beaings.Since it was first established, E-AISA was dedicated in research, development and manufacture of bearings. Now, E-AISA has become main and 1 of the first grade suppliers of all kinds of bearings.
Our products include: Deep Groove Ball Bearings, Self-aligning Ball Bearings, Spherical Bearings, Tapered Roller Bearings,Cylindrical Roller Bearings, Needle Roller Bearings, Self-aligning Roller Bearings, Angular Contact Ball Bearings, Thrust Ball Bearings and Trust Roller Bearings and Special Bearings.
E-Asia is a backbone enterprise for bearing production in China. With an area of 60, 000 square meters, more than 260 sets devices and machines, and around 200 employees, our company annually turns out more than 6 million sets bearings.

Our Bearings are exported to the USA, Canada, UK, Germany, Poland, Italy, Russia, the Middle East, Africa and other countries and regions of the world. E-Asia Bearing Co. Ltd. Is committed to the introduction of high-quality bearing products. Our company have more than 200 employees.
Our brands include ZWZ bearings, CZPT bearings, CZPT bearings, CZPT bearings, CZPT bearings, CZPT bearings and so forth.

Our belief is “Specialization is quality; Quality is the future. Any product with 0.01% defect is 100% reject” is our quality policy.

Packaging & Shipping

FAQ

1.What is the minimum order quantity for this product?
Can be negotiated, we will try our best to meet customer needs.Our company is mainly based on wholesale sales, most customers’orders are more than 1 ton.

2.What is your latest delivery time?
Most orders will be shipped within 3-5 days of payment being received.

3.Does your company have quality assurance?
Yes, for 2 years.

4.What is the competitiveness of your company’s products compared to other companies?
High precision, high speed, low noise.

5.What are the advantages of your company’s services compared to other companies?
Answer questions online 24 hours a day, reply in a timely manner, and provide various documents required by customers for customs clearance or sales. 100% after-sales service.

6.Which payment method does your company support?
Do our best to meet customer needs, negotiable.

7.How to contact us quickly?
Please send us an inquiry or message and leave your other contact information, such as phone number, account or account, we will contact you as soon as possible and provide the detailed information you need.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Brand:	Koyo, Timken NSK NTN .
Precision:	Z1V1 Z2V2 Z3V3
Cage:	Steel, Nylon, Brass
Payment:	L/C, T/T, Western Union
OEM Service:	Yes
Application:	Transmission, Instrumentation, Electrical

Customization:	Available \| Customized Request

ball bearing

What are the Challenges Associated with Noise Reduction in Ball Bearings?

Noise reduction in ball bearings is a crucial consideration, especially in applications where noise levels must be minimized for operational efficiency and user comfort. While ball bearings are designed to operate smoothly, there are several challenges associated with reducing noise in their operation:

Vibration:

Vibration generated by the movement of rolling elements and raceways can lead to noise. Even minor irregularities in bearing components or the mounting system can cause vibration that translates into audible noise.

Bearing Type and Design:

The type and design of the ball bearing can impact noise generation. For example, deep groove ball bearings are known for their quiet operation, while angular contact bearings can generate more noise due to their higher contact angles.

Lubrication:

Improper or inadequate lubrication can result in increased friction and wear, leading to noise. Choosing the right lubricant and maintaining proper lubrication levels are essential for reducing noise in ball bearings.

Bearing Clearance and Preload:

Incorrect clearance or preload settings can lead to noise issues. Excessive clearance or inadequate preload can cause the rolling elements to impact the raceways, resulting in noise during rotation.

Material and Manufacturing Quality:

The quality of materials and manufacturing processes can affect noise levels. Inconsistent or low-quality materials, improper heat treatment, or manufacturing defects can lead to noise generation during operation.

Surface Finish:

The surface finish of the rolling elements and raceways can impact noise. Rough surfaces can generate more noise due to increased friction and potential irregularities.

Sealing and Shielding:

Seals and shields that protect bearings can influence noise levels. While they are necessary for contamination prevention, they can also cause additional friction and generate noise.

Operating Conditions:

External factors such as temperature, speed, and load can influence noise levels. High speeds or heavy loads can amplify noise due to increased stress on the bearing components.

Wear and Deterioration:

As ball bearings wear over time, noise levels can increase. Worn components or inadequate lubrication can lead to more significant noise issues as the bearing operates.

To address these challenges and reduce noise in ball bearings, manufacturers and engineers employ various techniques, such as optimizing design, selecting suitable bearing types, using proper lubrication, maintaining accurate preload settings, and ensuring high-quality materials and manufacturing processes. Noise reduction efforts are essential to improve overall product quality, meet noise regulations, and enhance user experience in various applications.

ball bearing

Are there any Industry Standards or Certifications that Ball Bearings should Meet?

Yes, there are several industry standards and certifications that ball bearings should meet to ensure their quality, performance, and reliability. These standards help manufacturers, engineers, and customers assess the suitability of bearings for specific applications. Some of the key standards and certifications for ball bearings include:

ISO Standards:

The International Organization for Standardization (ISO) has developed a series of standards related to ball bearings. ISO 15 defines dimensions, boundary dimensions, and tolerances for radial bearings. ISO 281 specifies dynamic load ratings and calculation methods for bearings’ life calculations.

ABEC (Annular Bearing Engineering Committee) Ratings:

ABEC ratings are commonly used in North America to indicate the precision and performance of ball bearings. Ratings range from ABEC 1 (lowest precision) to ABEC 9 (highest precision). However, it’s important to note that ABEC ratings focus primarily on dimensional tolerances and do not encompass all aspects of bearing quality.

DIN Standards:

The German Institute for Standardization (Deutsches Institut für Normung, DIN) has published various standards related to ball bearings. DIN 625 covers dimensions for deep groove ball bearings, while DIN 616 provides guidelines for precision angular contact ball bearings.

JIS (Japanese Industrial Standards):

JIS standards are used in Japan and internationally to define the characteristics and dimensions of various products, including ball bearings. JIS B 1512 outlines the classification and dimensions of rolling bearings.

ASTM (American Society for Testing and Materials) Standards:

ASTM has standards that cover various aspects of bearing testing, performance, and materials. ASTM F2215, for instance, specifies the requirements for ball bearings used in surgical implants.

CE Marking:

CE marking indicates that a product complies with European Union health, safety, and environmental requirements. It may be required for bearings used in machinery intended to be sold within the EU market.

Industry-Specific Standards:

Various industries, such as aerospace, automotive, medical, and nuclear, have specific standards or certifications that bearings must meet to ensure safety, reliability, and compliance with industry-specific requirements.

Quality Management Systems:

Manufacturers that adhere to quality management systems, such as ISO 9001, demonstrate their commitment to consistent product quality and customer satisfaction. Certification to these systems indicates that the manufacturing process follows established protocols and best practices.

When selecting ball bearings, it’s important to consider the relevant standards and certifications that align with the application’s requirements. This ensures that the bearings meet recognized quality and performance criteria, ultimately contributing to reliable and efficient operation.

ball bearing

What are the Primary Benefits of Using Ball Bearings in Machinery and Equipment?

Ball bearings offer several primary benefits when used in machinery and equipment. Their design and functionality provide advantages that contribute to the efficient and reliable operation of various applications. Here are the key benefits:

Reduced Friction:

One of the primary benefits of ball bearings is their ability to minimize friction between moving parts. The rolling motion of the balls reduces the contact area and sliding friction, leading to smoother operation and less energy loss due to frictional heating.

Efficient Load Support:

Ball bearings are engineered to support both radial and axial loads, making them versatile for applications with multidirectional forces. This load-bearing capability allows machinery to handle different types of loads while maintaining performance and stability.

Smooth Rotation:

Ball bearings enable smooth and precise rotational movement. The rolling motion of the balls provides consistent motion with minimal resistance, ensuring that machinery operates smoothly and without jerks.

High-Speed Capability:

Due to their low friction and efficient rolling action, ball bearings are suitable for high-speed applications. They allow machinery and equipment to achieve and maintain high rotational speeds without excessive wear or heat buildup.

Reduced Wear and Maintenance:

The reduced friction in ball bearings leads to lower wear on components. This results in longer service intervals and reduced maintenance requirements, saving both time and maintenance costs.

Energy Efficiency:

By minimizing friction and reducing energy losses, ball bearings contribute to the overall energy efficiency of machinery. This is particularly important in applications where energy consumption is a concern.

Versatility:

Ball bearings come in various types, sizes, and configurations, allowing them to be used in a wide range of machinery and equipment. They can be customized to suit specific application requirements.

Reliability and Longevity:

Ball bearings are designed to withstand heavy loads and harsh operating conditions. Their durability and resistance to wear ensure reliable performance and an extended operational life.

Quiet Operation:

Ball bearings contribute to quiet machinery operation due to the smooth rolling motion of the balls. This is particularly important in applications where noise reduction is a consideration.

In summary, the primary benefits of using ball bearings in machinery and equipment include reduced friction, efficient load support, smooth rotation, high-speed capability, reduced wear and maintenance, energy efficiency, versatility, reliability, and quiet operation. These benefits collectively enhance the performance and longevity of machinery across various industries.

China OEM FM Bearings for All Kinds of Transmissions 6400 62200 6317 6309 6325 6000 C3 Ball Bearings bearing distributors
editor by CX 2024-05-14

China high quality Motorcycle Parts Bearing 6000/6001/6002/6003 Deep Groove Ball Bearing with Best Sales

Product Description

BEARING INNER RING
A steel ball with a common steel ball or roller rolling on the outer surface of the inner ring.
RUBBER SEALAFTER CODE: RS 2RS Z ZZ
The sealing material is made of skeleton rubber and has good dust-proof effect, which can prevent any foreign matter from invading and dust and water in a harsh environment.

Main Features1.Bearing moves very Fast & Quiet, with very smooth hand feeling
2.High precision, long life, low noise
3.High-end technology
4.Good after-sales service

Company Profile

HangZhou CZPT Machinery Technology Co., Ltd is industry and trade company which modern enterprise integrating scientific research, development, manufacture and trading. Based on integrity, responsibility and cooperation, our company have professional R&D and sales team, providing one-stop service for customers. Our company mainly products is Bearing, Jack Hammer, Screw Air Compressor, Piston Air Compressor and Other Machinery Hardware Product etc.

After many years of production and research and development, we have obtained more than 20 national patents. The products are sold at home and abroad and are well received by customers. Our products sold at home and abroad, after get the self-managemert import and export rights, our products are exported to Vietnam, Indonesia, Philippines, Cambodia, Pakistan, Afghanistan and other countries and regions.

Application

Electric motors and generators
Agriculture
Material handling
Industrial transmissions
Food and beverage
Industrial pumps
Industrial fans
Two and 3 wheelers
Cars and light trucks

Packaging & Shipping

Customer feedback

FAQ

Q1: Are you factory or trade company?
A1: We are factory. And we have our own trading company.

Q2: What the exactly address of your factory?
A2: Our company is located in Xihu (West Lake) Dis. East Road, Xihu (West Lake) Dis. District, HangZhou, ZHangZhoug, China.

Q3: Will you provide some spare parts of the machines?
A3: Yes, of course.

Q4: What about the voltage of products? Can they be customized?
A4: Yes, of course. The voltage can be customized according to your equipment.

Q5: Which payment term can you accept?
A5: 30% T/T in advance, 70% T/T against the B/L copy.

Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome.

Q7: Which trade term can you accept?
A7: Available trade terms: FOB, CIF, CFR, EXW, CPT, etc.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Provided
Type:	Engine Bearing
Material:	Chrome Steel
Tolerance:	P0
Clearance:	C2
ABS:	Without ABS

Samples:	US$ 0/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

ball bearing

What are the Challenges Associated with Noise Reduction in Ball Bearings?

Vibration:

Bearing Type and Design:

Lubrication:

Bearing Clearance and Preload:

Incorrect clearance or preload settings can lead to noise issues. Excessive clearance or inadequate preload can cause the rolling elements to impact the raceways, resulting in noise during rotation.

Material and Manufacturing Quality:

Surface Finish:

The surface finish of the rolling elements and raceways can impact noise. Rough surfaces can generate more noise due to increased friction and potential irregularities.

Sealing and Shielding:

Seals and shields that protect bearings can influence noise levels. While they are necessary for contamination prevention, they can also cause additional friction and generate noise.

Operating Conditions:

External factors such as temperature, speed, and load can influence noise levels. High speeds or heavy loads can amplify noise due to increased stress on the bearing components.

Wear and Deterioration:

As ball bearings wear over time, noise levels can increase. Worn components or inadequate lubrication can lead to more significant noise issues as the bearing operates.

ball bearing

How do Ceramic Ball Bearings Compare to Traditional Steel Ball Bearings in Terms of Performance?

Ceramic ball bearings and traditional steel ball bearings have distinct characteristics that can impact their performance in various applications. Here’s a comparison of how these two types of bearings differ in terms of performance:

Material Composition:

Ceramic Ball Bearings:

Ceramic ball bearings use ceramic rolling elements, typically made from materials like silicon nitride (Si3N4) or zirconium dioxide (ZrO2). These ceramics are known for their high hardness, low density, and resistance to corrosion and wear.

Traditional Steel Ball Bearings:

Traditional steel ball bearings use steel rolling elements. The type of steel used can vary, but common materials include chrome steel (52100) and stainless steel (440C). Steel bearings are known for their durability and strength.

Friction and Heat:

Ceramic Ball Bearings:

Ceramic bearings have lower friction coefficients compared to steel bearings. This results in reduced heat generation during operation, contributing to higher efficiency and potential energy savings.

Traditional Steel Ball Bearings:

Steel bearings can generate more heat due to higher friction coefficients. This can lead to increased energy consumption in applications where efficiency is crucial.

Weight:

Ceramic Ball Bearings:

Ceramic bearings are lighter than steel bearings due to the lower density of ceramics. This weight reduction can be advantageous in applications where minimizing weight is important.

Traditional Steel Ball Bearings:

Steel bearings are heavier than ceramic bearings due to the higher density of steel. This weight may not be as critical in all applications but could impact overall equipment weight and portability.

Corrosion Resistance:

Ceramic Ball Bearings:

Ceramic bearings have excellent corrosion resistance, making them suitable for applications in corrosive environments, such as marine or chemical industries.

Traditional Steel Ball Bearings:

Steel bearings are susceptible to corrosion, especially in harsh environments. Stainless steel variants offer improved corrosion resistance but may still corrode over time.

Speed and Precision:

Ceramic Ball Bearings:

Ceramic bearings can operate at higher speeds due to their lower friction and ability to withstand higher temperatures. They are also known for their high precision and low levels of thermal expansion.

Traditional Steel Ball Bearings:

Steel bearings can operate at high speeds as well, but their heat generation may limit performance in certain applications. Precision steel bearings are also available but may have slightly different characteristics compared to ceramics.

Cost:

Ceramic Ball Bearings:

Ceramic bearings are generally more expensive to manufacture than steel bearings due to the cost of ceramic materials and the challenges in producing precision ceramic components.

Traditional Steel Ball Bearings:

Steel bearings are often more cost-effective to manufacture, making them a more economical choice for many applications.

In conclusion, ceramic ball bearings and traditional steel ball bearings offer different performance characteristics. Ceramic bearings excel in terms of low friction, heat generation, corrosion resistance, and weight reduction. Steel bearings are durable, cost-effective, and widely used in various applications. The choice between the two depends on the specific requirements of the application, such as speed, precision, corrosion resistance, and budget considerations.

ball bearing

What Factors should be Considered when Selecting a Ball Bearing for a Particular Application?

Selecting the right ball bearing for a specific application involves careful consideration of various factors to ensure optimal performance, longevity, and reliability. Here are the key factors that should be taken into account:

Load Type and Magnitude:

Determine the type of load (radial, axial, or combined) and the magnitude of the load that the bearing will need to support. Choose a bearing with the appropriate load-carrying capacity to ensure reliable operation.

Speed and Operating Conditions:

Consider the rotational speed of the application and the operating conditions, such as temperature, humidity, and exposure to contaminants. Different bearing types and materials are suited for varying speeds and environments.

Accuracy and Precision:

For applications requiring high accuracy and precision, such as machine tool spindles or optical instruments, choose high-precision bearings that can maintain tight tolerances and minimize runout.

Space Limitations:

If the application has limited space, choose miniature or compact ball bearings that can fit within the available dimensions without compromising performance.

Thrust and Radial Loads:

Determine whether the application requires predominantly thrust or radial load support. Choose the appropriate type of ball bearing (thrust, radial, or angular contact) based on the primary load direction.

Alignment and Misalignment:

If the application experiences misalignment between the shaft and housing, consider self-aligning ball bearings that can accommodate angular misalignment.

Mounting and Installation:

Consider the ease of mounting and dismounting the bearing. Some applications may benefit from features like flanges or snap rings for secure installation.

Lubrication and Maintenance:

Choose a bearing with appropriate lubrication options based on the application’s speed and temperature range. Consider whether seals or shields are necessary to protect the bearing from contaminants.

Environmental Conditions:

Factor in the operating environment, including exposure to corrosive substances, chemicals, water, or dust. Choose materials and coatings that can withstand the specific environmental challenges.

Bearing Material:

Select a bearing material that suits the application’s requirements. Common materials include stainless steel for corrosion resistance and high-carbon chrome steel for general applications.

Bearing Arrangement:

Consider whether a single-row, double-row, or multiple bearings in a specific arrangement are needed to accommodate the loads and moments present in the application.

By carefully evaluating these factors, engineers and designers can choose the most suitable ball bearing that aligns with the specific demands of the application, ensuring optimal performance, durability, and overall operational efficiency.

China high quality Motorcycle Parts Bearing 6000/6001/6002/6003 Deep Groove Ball Bearing with Best Sales
editor by CX 2024-05-14

China manufacturer China High Precision Ball Bearing Size Deep Groove Ball Bearing 689 manufacturer

Product Description

Product features

Deep groove ball bearing is a common rolling bearing, its inner ring and outer ring are both spherical, can bear radial and axial load, suitable for high-speed rotation and low noise occasions. The following are more introductions of deep groove ball bearings:
Structure type: The structure types of deep groove ball bearings include single-row, double-row and four-point contact and other types. Among them, single-row deep groove ball bearings are the most common, and the spherical raceway between the inner and outer rings enables the bearing to withstand radial and axial loads. Double-row deep groove ball bearings have a higher load capacity and are suitable for occasions that need to bear large radial and axial loads. Four-point contact deep groove ball bearings can withstand greater radial and axial loads, and can also withstand a certain tilting moment.
Material selection: The material selection of deep groove ball bearings includes steel, stainless steel, ceramics and other materials. Among them, steel deep groove ball bearings have good wear resistance and strength and are suitable for most industrial applications. Stainless steel deep groove ball bearings have good corrosion resistance and are suitable for humid and corrosive environments. Ceramic deep groove ball bearings have good wear resistance and corrosion resistance, and are suitable for high-speed rotation and high-temperature environments.
Dimensions: Deep groove ball bearings are available in various sizes, ranging from small to large. Generally speaking, the inner diameter of deep groove ball bearings ranges from 1 mm to 500 mm, the outer diameter ranges from 3 mm to 800 mm, and the thickness ranges from 1 mm to 200 mm. Appropriate size specifications can be selected according to the needs of different equipment.
Scope of application: deep groove ball bearings are widely used in mechanical equipment, automobiles, motors, instruments, household appliances and other fields. For example, deep groove ball bearings can be used between the rotor and stator in motors, in hubs and transmission systems in automobiles, in transmission systems and support systems in mechanical equipment, etc.
Advantages: Deep groove ball bearings have the advantages of simple structure, convenient use, wear resistance and low noise. At the same time, the contact area between the ball and the raceway of the deep groove ball bearing is small, so the friction coefficient is small, which can reduce energy loss and improve mechanical efficiency.
In short, deep groove ball bearings are a common rolling bearing with the advantages of simple structure, convenient use, wear resistance, low noise, etc., and are suitable for mechanical equipment, automobiles, motors, instruments, household appliances and other fields.

Company Profile

ZheJiang Jieyi Bearing Co., Ltd. is a more than 20-year history of bearing trading company. We are located in the biggest bearing town in China–Yiandian Town.

Jieyi Bearing also provides OEM service, such as bearing quality, noise level, grease brand, packing method, etc. We have enough OEM experience, and have a complete OEM manual for customer reference.

Products have been selling well in the American, French, Spanish, Austria, Italian, the U. A. E. Saudi, Pakistan, India, and Brizal markets.

With over 20 years′ experience in bearings market, Jieyi Bearing have built up good relationship with all of our customers and quality factory. We always get satisfactory feedback from our customers because of the high quality products and good OEM service. We always supply the quality, stable, economical bearings and proper technical services.

Jieyi Bearing has advanced quality testing and inspecting equipment, to guarantee product quality meets customers’ demand. Annually our company′s export over 10 million dollars.

Welcome to people of various enterprises with advance!

FAQ

Q: Are you trading company or manufacturer ?
A: We are factory and trading company.
Q: How long is your delivery time?
A: Within 7 days with stock. 15-30 days for 1 container to OEM brand following your request
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge, freight cost need to be charged.
Q: What is your payment term?
A: We accept 30% TT advance ,70% balance against the bill loading copy. Also 100% L/C is ok.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Contact Angle:	60°
Aligning:	Non-Aligning Bearing
Separated:	Unseparated
Rows Number:	Single
Load Direction:	Radial Bearing
Material:	Bearing Steel

Samples:	US$ 0.01/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

ball bearing

Are there Specific Maintenance Practices to Ensure the Longevity of Ball Bearings?

Regular Lubrication:

Clean Environment:

Proper Installation:

Regular Inspections:

Temperature Monitoring:

Monitor bearing temperatures during operation using infrared thermometers or sensors. Abnormal temperature increases can indicate inadequate lubrication, misalignment, or other problems.

Correct Handling:

Handle bearings with care to prevent damage during storage, transportation, and installation. Avoid dropping or subjecting them to impacts that can affect their internal components.

Bearing Removal and Replacement:

Follow proper procedures when removing and replacing bearings. Use appropriate tools and techniques to avoid damage to the bearing or the surrounding components.

Alignment Maintenance:

Maintain proper shaft and housing alignment to prevent excessive loads and wear on the bearing. Misalignment can lead to increased stress and premature failure.

Training and Education:

Provide training to operators and maintenance personnel on proper bearing maintenance and handling practices. Educated personnel are more likely to identify issues and perform maintenance correctly.

Documented Records:

ball bearing

What are the Differences between Deep Groove Ball Bearings and Angular Contact Ball Bearings?

Deep groove ball bearings and angular contact ball bearings are two common types of ball bearings, each designed for specific applications and load conditions. Here are the key differences between these two types of bearings:

Design and Geometry:

Deep Groove Ball Bearings:

Deep groove ball bearings have a simple design with a single row of balls that run along deep raceways in both the inner and outer rings. The rings are usually symmetrical and non-separable, resulting in a balanced load distribution.

Angular Contact Ball Bearings:

Angular contact ball bearings have a more complex design with two rows of balls, oriented at an angle to the bearing’s axis. This arrangement allows for the transmission of both radial and axial loads, making them suitable for combined loads and applications requiring high precision.

Load Carrying Capacity:

Deep Groove Ball Bearings:

Deep groove ball bearings are primarily designed to carry radial loads. They can handle axial loads in both directions, but their axial load-carrying capacity is generally lower compared to angular contact ball bearings.

Angular Contact Ball Bearings:

Angular contact ball bearings are specifically designed to handle both radial and axial loads. The contact angle between the rows of balls determines the bearings’ axial load-carrying capacity. They can handle higher axial loads and are commonly used in applications with thrust loads.

Contact Angle:

Deep Groove Ball Bearings:

Deep groove ball bearings have no defined contact angle, as the balls move in a deep groove along the raceways. They are primarily designed for radial loads.

Angular Contact Ball Bearings:

Angular contact ball bearings have a specified contact angle between the rows of balls. This contact angle allows them to carry both radial and axial loads and is crucial for their ability to handle combined loads.

Applications:

Deep Groove Ball Bearings:

Deep groove ball bearings are commonly used in applications that primarily require radial loads, such as electric motors, pumps, and conveyor systems. They are also suitable for high-speed operation.

Angular Contact Ball Bearings:

Angular contact ball bearings are used in applications where both radial and axial loads are present, such as in machine tools, automotive wheel hubs, and aerospace components. They are especially useful for applications that require precise axial positioning and handling of thrust loads.

Limitations:

Deep Groove Ball Bearings:

Deep groove ball bearings are not as suitable for handling significant axial loads and may experience skidding under certain conditions due to their deep raceways.

Angular Contact Ball Bearings:

Angular contact ball bearings can experience increased heat generation and wear at higher speeds due to the contact angle of the balls.

In summary, the design, load-carrying capacity, contact angle, and applications differ between deep groove ball bearings and angular contact ball bearings. Choosing the appropriate type depends on the specific load conditions and requirements of the application.

ball bearing

What is a Ball Bearing and How does it Function in Various Applications?

A ball bearing is a type of rolling-element bearing that uses balls to reduce friction between moving parts and support radial and axial loads. It consists of an outer ring, an inner ring, a set of balls, and a cage that separates and maintains a consistent spacing between the balls. Here’s how ball bearings function in various applications:

Reduction of Friction:

Ball bearings function by replacing sliding friction with rolling friction. The smooth, spherical balls minimize the contact area between the inner and outer rings, resulting in lower friction and reduced heat generation.

Radial and Axial Load Support:

Ball bearings are designed to support both radial loads (forces perpendicular to the shaft’s axis) and axial loads (forces parallel to the shaft’s axis). The distribution of balls within the bearing ensures load-carrying capacity in multiple directions.

Smooth Rotational Movement:

Ball bearings facilitate smooth and precise rotational movement. The rolling motion of the balls allows for controlled and continuous rotation with minimal resistance.

Applications in Machinery:

Ball bearings are used in a wide range of machinery and equipment, including motors, generators, gearboxes, conveyors, and fans. They enable the efficient transfer of motion while reducing wear and energy losses.

Automotive Industry:

Ball bearings are extensively used in automobiles for various applications, including wheel hubs, transmission systems, steering mechanisms, and engine components. They provide reliability and durability in challenging automotive environments.

Industrial Machinery:

In industrial settings, ball bearings support rotating shafts and ensure the smooth operation of equipment such as pumps, compressors, and machine tools.

High-Speed Applications:

Ball bearings are suitable for high-speed applications due to their low friction and ability to accommodate rapid rotation. They are used in applications like electric motors and aerospace components.

Precision Instruments:

For precision instruments, such as watches, cameras, and medical devices, ball bearings provide accurate rotational movement and contribute to the overall performance of the instrument.

Variety of Sizes and Types:

Ball bearings come in various sizes, configurations, and materials to suit different applications. Different types include deep groove ball bearings, angular contact ball bearings, thrust ball bearings, and more.

In summary, ball bearings are essential components in a wide range of applications where smooth rotation, load support, and reduced friction are critical. Their versatility, reliability, and efficiency make them indispensable in industries spanning from automotive to industrial machinery to precision instruments.

China manufacturer China High Precision Ball Bearing Size Deep Groove Ball Bearing 689 manufacturer
editor by CX 2024-05-14

China Hot selling UC317 318 319 320 Standard Insert Pillow Block Ball Bearing for Different Industry bearing block

Product Description

details of pillow block ball bearing

pillow block bearing
UC200 series

Bearing type	Dimensions(mm)								Weight(KG)	basic load capacity(KN)		Limt speed(r/min)
Bearing type	d	D	B	C	S	G	H	ds		dynamic	static
UC201	12	40	27.4	14	11.5	4.5	4	M*0.75	0.12	7.36	4.48	4000
UC202	15	40	27.4	14	11.5	4.5	4	M*0.75	0.11	7.36	4.48	4000
UC203	17	40	27.4	14	11.5	4.5	4	M*0.75	0.1	7.36	4.48	4000
UC204	20	47	31	17	12.7	4.7	4.5	M6*1.0	0.16	9.88	6.20	4000
UC205	25	52	34.1	17	14.3	5.5	4.7	M6*1.0	0.19	10.78	6.98	3400
UC206	30	62	38.1	19	15.9	6	4.5	M6*1.0	0.31	14.97	10.04	2800
UC207	35	72	42.9	20	17.5	6.5	5.1	M8*1.0	0.48	19.75	13.67	2400
UC208	40	80	49.2	21	19	8	5.8	M8*1.0	0.62	22.71	15.94	2200
UC209	45	85	49.2	22	19	8	6.2	M8*1.0	0.67	24.36	17.71	1900
UC210	50	90	51.6	23	19	9	6.5	M10*1.0	0.78	26.98	19.84	1800
UC211	55	100	55.6	25	22.2	9	7.3	M10*1.0	1.03	33.37	25.11	1600
UC212	60	110	65.1	27	25.4	11	7.7	M10*1.0	1.45	36.74	27.97	1500
UC213	65	120	65.1	28	25.4	12	8.3	M10*1.0	1.71	44.01	34.18	1400
UC214	70	125	74.6	30	30.2	12	8.7	M12*1.25	2.06	46.79	37.59	1300
UC215	75	130	77.8	30	33.3	12	9.2	M12*1.25	2.22	50.85	41.26	1200
UC216	80	140	82.6	33	33.3	14	9.6	M12*1.25	2.8	55.04	45.09	1100
UC217	85	150	85.7	36	34.1	14	10.5	M12*1.25	3.48	64.01	53.28	1000
UC218	90	160	96	37	39.7	14	11.1	M12*1.25	4.3	73.83	60.76	950

Bearing type	Dimensions(mm)								Weight(KG)	basic load capacity(KN)		Limt speed(r/min)
Bearing type	d	D	B	C	S	G	H	ds		dynamic	static
UC305	25	62	38	21	15	6	6.1	M6*1	0.35	17.22	11.39	2800
UC306	30	72	43	23	17	6	6.7	M8*1	0.56	20.77	14.17	2600
UC307	35	80	48	25	19	8	7.4	M8*1	0.71	25.66	17.92	2200
UC308	40	90	52	27	22	10	8.2	M10*1	0.96	31.35	22.38	2000
UC309	45	100	57	30	22	10	9	M10*1	1.28	40.66	30.00	1800
UC310	50	110	61	32	25	12	10	M12*1.25	1.65	47.58	35.71	1700
UC311	55	120	66	34	26	12	10.7	M12*1.25	1.90	55.05	41.91	1400
UC312	60	130	71	36	30	12	11.5	M12*1.25	2.60	62.88	48.60	1300
UC313	65	140	75	38	33	12	12.2	M12*1.25	3.15	72.21	56.68	1200
UC314	70	150	78	40	33	14	13	M12*1.25	3.83	80.10	63.48	1100
UC315	75	160	82	42	33	14	13.8	M14*1.5	4.59	87.25	71.68	1000
UC316	80	170	86	44	34	14	14.5	M16*1.5	5.30	94.57	80.35	1000
UC317	85	180	96	46	40	16	15	M16*1.5	6.58	102.25	89.52	9050
UC318	90	190	96	48	40	16	15.9	M16*1.5	7.50	110.81	100.76	900
UC319	95	200	103	50	41	16	16.7	M16*1.5	8.70	120.51	113.75	850
UC320	100	215	108	54	42	18	18	M16*1.5	10.80	133.06	131.18	800

more series of pillow block bearing
uel200 series
uk200 series
ucp200 series
ucp300 sereis
ucf200 series
ucf300 series
uct200 series
uct300 sereis
ucfc200 series
ucfs300 series

Our packing for pillow blcok bearing:
* Industrial pakage+outer carton+pallets
* sigle box+outer carton+pallets
* Tube package+middle box+outer carton+pallets
* According to your requirments

We have been engaged in foreign trade for more than 6 years and are well-known enterprises in ZheJiang
Province. The fixed assets of the machine are more than 2 million US dollars, and the annual foreign trade
Sales volume exceeds 2 million US dollars.
We have extensive cooperation with countries in Asia, Europe, and the Americas. Including Russia, Ukraine,
Elarus, Kazakhstan, Uzbekistan, Tajikistan, Spain, Mexico, India, Pakistan, Turkey, Vietnam and other industrial
Areas.

SAMPLES of pillow block bearing
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost.
3. It’s better to start your order with Trade Assurance to get full protection for your samples order.

CUSTOMIZED
The customized LOGO or drawing is acceptable for us.

OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield.
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.

SUPORT
Please visit our bearings website, we strongly encourge that you can communicate with us through email, thanks!

We have all kinds of bearings, just tell me your item number and quantity, best price will be offered to you soon
The material of the bearings, precision rating, seals type, OEM service, etc, all of them we can make according to your requirement.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rolling Body:	Ball Bearings
The Number of Rows:	Single
Outer Dimension:	Small, Middle, Large Size

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \| Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

ball bearing

What are the Challenges Associated with Noise Reduction in Ball Bearings?

Vibration:

Bearing Type and Design:

Lubrication:

Bearing Clearance and Preload:

Incorrect clearance or preload settings can lead to noise issues. Excessive clearance or inadequate preload can cause the rolling elements to impact the raceways, resulting in noise during rotation.

Material and Manufacturing Quality:

Surface Finish:

The surface finish of the rolling elements and raceways can impact noise. Rough surfaces can generate more noise due to increased friction and potential irregularities.

Sealing and Shielding:

Seals and shields that protect bearings can influence noise levels. While they are necessary for contamination prevention, they can also cause additional friction and generate noise.

Operating Conditions:

External factors such as temperature, speed, and load can influence noise levels. High speeds or heavy loads can amplify noise due to increased stress on the bearing components.

Wear and Deterioration:

As ball bearings wear over time, noise levels can increase. Worn components or inadequate lubrication can lead to more significant noise issues as the bearing operates.

ball bearing

What Role do Seals and Shields Play in Protecting Ball Bearings from Dirt and Debris?

Seals and shields are critical components of ball bearings that play a crucial role in protecting them from dirt, debris, moisture, and contaminants in various applications. These protective features help maintain the integrity of the bearing’s internal components and ensure reliable operation. Here’s how seals and shields contribute to bearing protection:

Contaminant Exclusion:

Seals and shields create a physical barrier between the external environment and the bearing’s interior. They prevent dust, dirt, water, and other contaminants from entering the bearing and coming into contact with the rolling elements and raceways.

Lubrication Retention:

Seals and shields help retain lubrication within the bearing. They prevent the lubricant from escaping and contaminants from entering, ensuring that the bearing remains properly lubricated for smooth operation and reduced friction.

Corrosion Prevention:

Seals and shields protect bearing components from exposure to moisture and corrosive substances. By preventing moisture ingress, they help extend the bearing’s lifespan by minimizing the risk of corrosion-related damage.

Extended Bearing Life:

Seals and shields contribute to the overall longevity of the bearing by reducing wear and damage caused by contaminants. They help maintain a clean internal environment, which promotes proper rolling contact and minimizes the risk of premature failure.

Enhanced Performance in Harsh Environments:

In applications exposed to harsh conditions, such as outdoor machinery or industrial settings, seals and shields are vital. They protect bearings from abrasive particles, chemicals, and extreme temperatures, ensuring reliable performance despite challenging conditions.

Noise and Vibration Reduction:

Seals and shields can help reduce noise and vibration generated by the bearing. They provide additional damping and stability, contributing to smoother operation and enhanced user comfort in noise-sensitive applications.

Customized Protection:

Manufacturers offer a variety of seal and shield designs to suit different application requirements. Some seals provide higher levels of protection against contamination, while others are designed for high-speed or high-temperature environments.

Trade-Offs:

While seals and shields offer significant benefits, they can also introduce some friction due to contact with the bearing’s inner or outer ring. Engineers must balance the level of protection with the desired operating characteristics, considering factors like friction, speed, and environmental conditions.

Overall, seals and shields play a vital role in maintaining the integrity and performance of ball bearings. By effectively preventing contaminants from entering and preserving lubrication, they ensure the smooth and reliable operation of machinery and equipment in a wide range of applications.

ball bearing

What are the Different Components that Make up a Typical Ball Bearing?

A typical ball bearing consists of several essential components that work together to reduce friction and support loads. Here are the main components that make up a ball bearing:

Outer Ring:

The outer ring is the stationary part of the bearing that provides support and houses the other components. It contains raceways (grooves) that guide the balls’ movement.

Inner Ring:

The inner ring is the rotating part of the bearing that attaches to the shaft. It also contains raceways that correspond to those on the outer ring, allowing the balls to roll smoothly.

Balls:

The spherical balls are the rolling elements that reduce friction between the inner and outer rings. Their smooth rolling motion enables efficient movement and load distribution.

Cage or Retainer:

The cage, also known as the retainer, maintains a consistent spacing between the balls. It prevents the balls from touching each other, reducing friction and preventing jamming.

Seals and Shields:

Many ball bearings include seals or shields to protect the internal components from contaminants and retain lubrication. Seals provide better protection against contaminants, while shields offer less resistance to rotation.

Lubricant:

Lubrication is essential to reduce friction, wear, and heat generation. Bearings are typically filled with lubricants that ensure smooth movement between the balls and raceways.

Flanges and Snap Rings:

In some designs, flanges or snap rings are added to help position and secure the bearing in its housing or on the shaft. Flanges prevent axial movement, while snap rings secure the bearing radially.

Raceways:

Raceways are the grooved tracks on the inner and outer rings where the balls roll. The shape and design of the raceways influence the bearing’s load-carrying capacity and performance.

Anti-Friction Shield:

In certain high-speed applications, a thin anti-friction shield can be placed between the inner and outer rings to minimize friction and heat generation.

These components work together to enable the smooth rolling motion, load support, and reduced friction that characterize ball bearings. The proper design and assembly of these components ensure the bearing’s optimal performance and longevity in various applications.

China Hot selling UC317 318 319 320 Standard Insert Pillow Block Ball Bearing for Different Industry bearing block
editor by CX 2024-05-13

China manufacturer China Manufacturer Auto Parts Machinery Roller Bearing Thrust Ball Bearing bearing example

Product Description

Company Profile

MKS Hydraulics ZheJiang Co., Ltd.is a scientific and professional bearing producing enterprise, gathering R&D, producing and sales as 1 integration.mainly operating on non-standard, special andgeneral bearings.

The company is especially focusing on the research and manufacture of general high-tech production with the 20 years R&D experience, professional R&D staff and advanced equipment, of which 8 sets are imported equipment and 40 sets are high-precision processing equipment. it has invested for building a modern workshop, including 1 Bainite heat processing workshop of world advanced level, 1 machine processing workshop, 2 moder thermostatic &no-dust roller grinders, assembly workshop, physical-chemical testing center, heating laboratory and moder-managed warehouse. Depending on the markets in China and abroad, the company puts an active attitude upon products R&D, resulting a healthy circulation of 1 development generation, 1 reserve generation, and 1 producion generation. The enterprise enlarges the R&D investment, creates own brand, and strives to increase the exporting products of high-tech & high value-added, gains the honorable sales result and grows into 1 of the largest R&D enterprise in China of non-standard bearing and special bearing.

The advanced technology, outstanding quaity and considerable service after sales with enthusiasm make us get the rapid development in quite short time of years, and now it becomes the largest developing and producing enterprise in Asia of concrete carrier truck, speed-reducing machine,mine-digging machine, hydraulic pump spindle bearing and crecent bearing. With the continuing and wholly new developing theory of Technology is the motivation and quality is the life, We are not only pursuing the leading position in China, but also determined to march into the worldwide bearing area during it developing process, The products are mainly applied on the industries of mine, metalurgy, engineering, machineny, machine tool,electronic machine and so on, The products have gained the excllent sales resul in the markets of Europe, Southeast Asia, Middle East and so on in a dozen of countries and areas.

Company Environment

Company Advantages

Packaging & Shipping

FAQ

1. how can we guarantee quality?
Always final Inspection before shipment;

2.what can you buy from us?
Auto Bearing,Bearing Housing,Taper Roller Bearing,Casting,Hydraulic pump,Hydraulic parts,excavator parts and so on.

Ceep groove ball bearing/Self aligning ball bearing/Cylindrical roller bearing/Spherical roller bearing/ Angular contact ball bearing/Tapered roller bearing/ Thrust ball bearing/Thrust cylindrical roller bearing/Needle roller bearing

3. why should you buy from us not from other suppliers?
One stop bearing and mechanical customized parts,
Designed bearing,
Small quantity order available
Factory price offer
OEM ODM bearing service

4.What is the transportation?
lf small quantity,we suggest to send by express,such as DHL,UPS,TNT FEDEX flarge amount,by air or sea shipping.

5.Can we design packaging?
Except regular packing,and we can make customer’s own packing.

6.What’s your payment method?
We can accept LC, T/T, D/P, PayPal, Western Union, Small-amount payment, MoneyGram etc.

7.Can the company provide free samples?
We can provide samples for free. You only need to provide shipping.

8.Is the company a production factory or a trading company?
MKS company is a manufacturing enterprise focusing on bearings ,hydraulic pumps and hydraulic parts , produce and sales.

If you have any questions,Please contact us,We must be reply quickly.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Raceway Super Finishing:	Yes
Bearing Grade:	P3
Service:	OEM / ODM Customized Logo
Shipment:	by Sea, by Air, by Express
Quality:	Good /High Quality
Features:	High Precision, High Speed, Long Life

Samples:	US$ 100/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

ball bearing

Are there Specific Maintenance Practices to Ensure the Longevity of Ball Bearings?

Regular Lubrication:

Clean Environment:

Proper Installation:

Regular Inspections:

Temperature Monitoring:

Monitor bearing temperatures during operation using infrared thermometers or sensors. Abnormal temperature increases can indicate inadequate lubrication, misalignment, or other problems.

Correct Handling:

Handle bearings with care to prevent damage during storage, transportation, and installation. Avoid dropping or subjecting them to impacts that can affect their internal components.

Bearing Removal and Replacement:

Follow proper procedures when removing and replacing bearings. Use appropriate tools and techniques to avoid damage to the bearing or the surrounding components.

Alignment Maintenance:

Maintain proper shaft and housing alignment to prevent excessive loads and wear on the bearing. Misalignment can lead to increased stress and premature failure.

Training and Education:

Provide training to operators and maintenance personnel on proper bearing maintenance and handling practices. Educated personnel are more likely to identify issues and perform maintenance correctly.

Documented Records:

ball bearing

How do Miniature Ball Bearings Differ from Standard-sized Ones, and Where are They Commonly Used?

Miniature ball bearings, as the name suggests, are smaller in size compared to standard-sized ball bearings. They have distinct characteristics and are designed to meet the unique requirements of applications that demand compactness, precision, and efficient rotation in confined spaces. Here’s how miniature ball bearings differ from standard-sized ones and where they are commonly used:

Size:

The most noticeable difference is their size. Miniature ball bearings typically have outer diameters ranging from a few millimeters to around 30 millimeters, while standard-sized ball bearings have larger dimensions suitable for heavier loads and higher speeds.

Load Capacity:

Due to their smaller size, miniature ball bearings have lower load-carrying capacities compared to standard-sized bearings. They are designed for light to moderate loads and are often used in applications where precision and compactness are prioritized over heavy load support.

Precision:

Miniature ball bearings are known for their high precision and accuracy. They are manufactured to tighter tolerances, making them suitable for applications requiring precise motion control and low levels of vibration.

Speed:

Miniature ball bearings can achieve higher speeds than standard-sized bearings due to their smaller size and lower mass. This makes them ideal for applications involving high-speed rotation.

Friction and Efficiency:

Miniature ball bearings generally have lower friction due to their smaller contact area. This contributes to higher efficiency and reduced heat generation in applications that require smooth and efficient motion.

Applications:

Miniature ball bearings find applications in various industries and sectors:

Electronics and Consumer Devices:

They are used in small motors, computer disk drives, printers, and miniature fans, where space is limited but precise motion is essential.

Medical and Dental Equipment:

Miniature bearings are used in medical devices such as surgical instruments, dental handpieces, and diagnostic equipment due to their precision and compactness.

Robotics and Automation:

Miniature ball bearings are integral to robotic arms, miniature conveyors, and automation systems, enabling precise movement in confined spaces.

Aerospace and Defense:

They are used in applications like UAVs (drones), aerospace actuators, and satellite components where size and weight constraints are critical.

Optics and Instrumentation:

Miniature bearings play a role in optical instruments, cameras, and measuring devices, providing smooth rotation and accurate positioning.

Overall, miniature ball bearings are specialized components designed for applications where space, precision, and efficient rotation are paramount. Their compactness and high precision make them crucial in various industries requiring reliable motion control in limited spaces.

ball bearing

What are the Primary Benefits of Using Ball Bearings in Machinery and Equipment?

Reduced Friction:

Efficient Load Support:

Smooth Rotation:

High-Speed Capability:

Reduced Wear and Maintenance:

The reduced friction in ball bearings leads to lower wear on components. This results in longer service intervals and reduced maintenance requirements, saving both time and maintenance costs.

Energy Efficiency:

Versatility:

Ball bearings come in various types, sizes, and configurations, allowing them to be used in a wide range of machinery and equipment. They can be customized to suit specific application requirements.

Reliability and Longevity:

Ball bearings are designed to withstand heavy loads and harsh operating conditions. Their durability and resistance to wear ensure reliable performance and an extended operational life.

Quiet Operation:

Ball bearings contribute to quiet machinery operation due to the smooth rolling motion of the balls. This is particularly important in applications where noise reduction is a consideration.

China manufacturer China Manufacturer Auto Parts Machinery Roller Bearing Thrust Ball Bearing bearing example
editor by CX 2024-05-13

China Custom Japan CZPT CZPT Bearings 6201 6202 6203 6204 6205 6208 6203RS Bearing CZPT 6204 6205 6206 6207 Ball Bearings 6203 6204 6201 CZPT carrier bearing

Product Description

Japan CZPT CZPT Bearings rs Bearing CZPT Ball Bearings NTN

Product Description

Deep Groove Ball Bearings:

Deep groove ball bearings are suitable for high or even very high speed operation, its very durable and do not require regular maintenance. This kind of bearing has small friction coefficient, high limit speed, various sizes and forms. It is widely used in precision instruments, low noise motors, automobiles, motorcycles and general machinery industries. It is mainly subjected to radial load and can also bear a certain amount of axial load.It can be used in gearboxes, instruments, motors, household appliances, internal combustion engines, roller skates, etc.

You can contact us to contact for specific information about the bearing model you want.

Detailed Photos

Size Information

Model	d(mm)	D(mm)	B(mm)	weight(kg)
6000	10	26	8	0.018
6001	12	28	8	0.571
6002	15	32	9	0.03
6003	17	35	10	0.04
6004	20	42	12	0.068
6005	25	47	12	0.079
6006	30	55	13	0.113
6007	35	62	14	0.149
6008	40	68	15	0.185
6009	45	75	16	0.231
6571	50	80	16	0.25
6201	12	32	10	0.036
6202	15	35	11	0.045
6203	17	40	12	0.065
6204	20	47	14	0.103
6205	25	52	15	0.127
6206	30	62	16	0.203
6207	35	72	17	0.287
6208	40	80	18	0.367
6209	45	85	19	0.416
6210	50	90	20	0.462

Our Main Products

1	Deep groove ball bearings
2	Insert bearings
3	Angular contact ball bearings
4	Self-aligning ball bearings
5	Thrust ball bearings
6	Cylindrical roller bearings
7	Needle roller bearings
8	Tapered roller bearings
9	Spherical roller bearings
10	Toroidal roller bearings
11	Cylindrical roller thrust bearings
12	Needle roller thrust bearings
13	Tapered roller thrust bearings
14	Spherical roller thrust bearings
15	Ball and roller screws
16	Linear guides and tables
17	Pollow block bearing
18	Wheel Bearings
19	Cam followers
20	Track rollers
21	Super-precision bearings
22	Plain bearings/Rod end bearings
23	Bearing Units
24	Bearing Housings

Packaging & Shipping

package	1)Neutral package + carton package 2)Carton package + pallet 3)Wood package + pallet
Delivery Time	1-3 days after order
Shipping	by air to door address / by sea to sea port

Company Profile

Certifications

FAQ

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Contact Angle:	25°
Aligning:	Non-Aligning Bearing
Separated:	Unseparated

Samples:	US$ 3/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \| Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

ball bearing

Are there Specific Maintenance Practices to Ensure the Longevity of Ball Bearings?

Regular Lubrication:

Clean Environment:

Proper Installation:

Regular Inspections:

Temperature Monitoring:

Monitor bearing temperatures during operation using infrared thermometers or sensors. Abnormal temperature increases can indicate inadequate lubrication, misalignment, or other problems.

Correct Handling:

Handle bearings with care to prevent damage during storage, transportation, and installation. Avoid dropping or subjecting them to impacts that can affect their internal components.

Bearing Removal and Replacement:

Follow proper procedures when removing and replacing bearings. Use appropriate tools and techniques to avoid damage to the bearing or the surrounding components.

Alignment Maintenance:

Maintain proper shaft and housing alignment to prevent excessive loads and wear on the bearing. Misalignment can lead to increased stress and premature failure.

Training and Education:

Provide training to operators and maintenance personnel on proper bearing maintenance and handling practices. Educated personnel are more likely to identify issues and perform maintenance correctly.

Documented Records:

ball bearing

How do Temperature and Environmental Conditions Affect the Performance of Ball Bearings?

Temperature and environmental conditions have a significant impact on the performance and longevity of ball bearings. The operating environment can influence factors such as lubrication effectiveness, material properties, and overall bearing behavior. Here’s how temperature and environmental conditions affect ball bearing performance:

Lubrication:

Temperature variations can affect the viscosity and flow characteristics of lubricants. Extreme temperatures can cause lubricants to become too thin or too thick, leading to inadequate lubrication and increased friction. In high-temperature environments, lubricants can degrade, reducing their effectiveness.

Material Properties:

Temperature changes can alter the material properties of the bearing components. High temperatures can lead to thermal expansion, affecting bearing clearances and potentially causing interference between components. Extreme cold temperatures can make materials more brittle and prone to fracture.

Clearance Changes:

Temperature fluctuations can cause changes in the internal clearance of ball bearings. For instance, at high temperatures, materials expand, leading to increased clearance. This can affect bearing performance, load distribution, and overall stability.

Corrosion and Contamination:

Harsh environmental conditions, such as exposure to moisture, chemicals, or abrasive particles, can lead to corrosion and contamination of bearing components. Corrosion weakens the material, while contamination accelerates wear and reduces bearing life.

Thermal Stress:

Rapid temperature changes can result in thermal stress within the bearing components. Differential expansion and contraction between the inner and outer rings can lead to stress and distortion, affecting precision and bearing integrity.

Noise and Vibration:

Temperature-related changes in material properties and internal clearances can influence noise and vibration levels. Extreme temperatures can lead to increased noise generation and vibration, affecting the overall operation of machinery.

Lubricant Degradation:

Environmental factors like humidity, dust, and contaminants can lead to premature lubricant degradation. Oxidation, moisture absorption, and the presence of foreign particles can compromise the lubricant’s performance and contribute to increased friction and wear.

Seal Effectiveness:

Seals and shields that protect bearings from contaminants can be affected by temperature fluctuations. Extreme temperatures can lead to seal hardening, cracking, or deformation, compromising their effectiveness in preventing contamination.

Choosing Appropriate Bearings:

When selecting ball bearings for specific applications, engineers must consider the expected temperature and environmental conditions. High-temperature bearings, bearings with specialized coatings, and those with enhanced sealing mechanisms may be necessary to ensure reliable performance.

Overall, understanding the impact of temperature and environmental conditions on ball bearing performance is crucial for proper bearing selection, maintenance, and ensuring optimal operation in diverse industries and applications.

ball bearing

Can you Explain the Various Types of Ball Bearings and their Specific Use Cases?

Ball bearings come in various types, each designed to meet specific application requirements. Here’s an overview of the different types of ball bearings and their specific use cases:

Deep Groove Ball Bearings:

Deep groove ball bearings are the most common and versatile type. They have a deep raceway that allows them to handle both radial and axial loads. They are used in a wide range of applications, including electric motors, household appliances, automotive components, and industrial machinery.

Angular Contact Ball Bearings:

Angular contact ball bearings have a contact angle that enables them to handle both radial and axial loads at specific angles. They are suitable for applications where combined loads or thrust loads need to be supported, such as in machine tool spindles, pumps, and agricultural equipment.

Self-Aligning Ball Bearings:

Self-aligning ball bearings have two rows of balls and are designed to accommodate misalignment between the shaft and the housing. They are used in applications where shaft deflection or misalignment is common, such as conveyor systems, textile machinery, and paper mills.

Thrust Ball Bearings:

Thrust ball bearings are designed to support axial loads in one direction. They are commonly used in applications where axial loads need to be supported, such as in automotive transmissions, steering systems, and crane hooks.

Single-Row vs. Double-Row Bearings:

Single-row ball bearings have a single set of balls and are suitable for moderate load and speed applications. Double-row ball bearings have two sets of balls and offer higher load-carrying capacity. Double-row designs are used in applications such as machine tool spindles and printing presses.

Miniature and Instrument Ball Bearings:

Miniature ball bearings are smaller in size and are used in applications with limited space and lower load requirements. They are commonly used in small electric motors, medical devices, and precision instruments.

Max-Type and Conrad Bearings:

Max-type ball bearings have a larger number of balls to increase load-carrying capacity. Conrad bearings have fewer balls and are used in applications with moderate loads and speeds.

High-Precision Ball Bearings:

High-precision ball bearings are designed for applications where accuracy and precision are critical, such as machine tool spindles, aerospace components, and optical instruments.

High-Speed Ball Bearings:

High-speed ball bearings are engineered to minimize friction and accommodate rapid rotation. They are used in applications such as dental handpieces, turbochargers, and centrifuges.

In summary, the various types of ball bearings are tailored to different application requirements, including load type, direction, speed, and environmental conditions. Selecting the appropriate type of ball bearing ensures optimal performance and longevity in specific applications.

China Custom Japan CZPT CZPT Bearings 6201 6202 6203 6204 6205 6208 6203RS Bearing CZPT 6204 6205 6206 6207 Ball Bearings 6203 6204 6201 CZPT carrier bearing
editor by CX 2024-05-13

China OEM Double Row Best Price 90X190X64mm Self Aligning Bearing 2318 Ball Bearing bearing bronze

Product Description

Self aligning ball bearings mainly bear radial loads and can also withstand small axial loads. The axial displacement of the
shaft (shell) is limited within the clearance limit, with automatic centering performance, allowing normal operation under
conditions of relatively small internal and external inclination. It is suitable for components where the support seat hole cannot
strictly guarantee coaxiality. Self aligning ball bearings are suitable for bearing heavy and impact loads, precision instruments,
low noise motors, automobiles, motorcycles, metallurgy, rolling mills, mines, petroleum, papermaking, cement, sugar squeezing
and other industries, as well as general machinery.

Type	BALL
Structure	Self-Aligning
Applicable Industries	Food Shop, Energy & Mining, Food & Beverage Shops, Advertising Company
Precision Rating	P0 P6 P5 P4 P2
Seals Type	OPEN OR SEAL
Number of Row	Double row
Product name	Self-aligning Roller Bearing

Company Profile

In order to meet the needs of the masses of customers and improve the market competitiveness of our company,
we can provide OEM service according to our customers′ Needs. We have gained ISO9001 certificate, CE certificate,
GOST certificate and SGS certificate. Our target is to carry out the strategic investment along with the development
of market and need of new products. With our strategic, excellent products, top technology and outstanding service,
we sincerely expect cooperation with more customers and friends for a better future. Our main products include
spherical roller bearing, deep groove ball bearings, cylindrical roller bearings, spherical roller bearings, needle roller
bearings, ball bearing units, water pump bearings, automobile bearing, linear motion bearing, oil-less bearings,
bush and self-lubricating bearings, and non-standard bearings. Also, we supply bearings to our domestic peeling
machine factory and the machine exported to India, Malaysia and Russia, no any complaint from customer until now.

“zero defect, zero complaints” as the quality objective.

FAQ

Q: Are you trading company or manufacturer ?

A: We are a trading company specializing in exporting bearings.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the

goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge

Q.You provide free consultation service?

Yes, before, during and after order, anytime.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Product Name:	Self Aligning Ball Bearing
Characteristic:	High Precision
Advantage:	Large Bearing Capacity
Holder:	Copper and Iron Retainers
Quality:	High Quality
Rolling Body:	Roller Bearings

Samples:	US$ 5/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

ball bearing

What are the Materials Typically Used in Manufacturing Ball Bearings and Their Advantages?

Ball bearings are manufactured using a variety of materials, each chosen for its specific properties and advantages in various applications. Here are some commonly used materials in ball bearing manufacturing and their respective benefits:

High-Carbon Chrome Steel (AISI 52100):

This is the most common material used for ball bearing manufacturing. It offers excellent hardness, wear resistance, and fatigue strength. High-carbon chrome steel bearings are suitable for a wide range of applications, from industrial machinery to automotive components.

Stainless Steel (AISI 440C, AISI 304, AISI 316):

Stainless steel bearings are corrosion-resistant and suitable for applications where moisture, chemicals, or exposure to harsh environments are concerns. AISI 440C offers high hardness and corrosion resistance, while AISI 304 and AISI 316 provide good corrosion resistance and are often used in food and medical industries.

Ceramic:

Ceramic bearings use silicon nitride (Si3N4) or zirconia (ZrO2) balls. Ceramic materials offer high stiffness, low density, and excellent resistance to corrosion and heat. Ceramic bearings are commonly used in high-speed and high-temperature applications, such as in aerospace and racing industries.

Plastic (Polyamide, PEEK):

Plastic bearings are lightweight and offer good corrosion resistance. Polyamide bearings are commonly used due to their low friction and wear properties. Polyether ether ketone (PEEK) bearings provide high-temperature resistance and are suitable for demanding environments.

Bronze:

Bronze bearings are often used in applications where self-lubrication is required. Bronze has good thermal conductivity and wear resistance. Bearings made from bronze are commonly used in machinery requiring frequent starts and stops.

Hybrid Bearings:

Hybrid bearings combine steel rings with ceramic balls. These bearings offer a balance between the advantages of both materials, such as improved stiffness and reduced weight. Hybrid bearings are used in applications where high speeds and low friction are essential.

Specialty Alloys:

For specific applications, specialty alloys may be used to meet unique requirements. For example, bearings used in extreme temperatures or corrosive environments may be made from materials like titanium or hastelloy.

Coated Bearings:

Bearings may also be coated with thin layers of materials like diamond-like carbon (DLC) or other coatings to enhance performance, reduce friction, and improve wear resistance.

The choice of material depends on factors such as application requirements, operating conditions, load, speed, and environmental factors. Selecting the right material is essential for ensuring optimal bearing performance, longevity, and reliability in diverse industries and applications.

ball bearing

How do Ceramic Ball Bearings Compare to Traditional Steel Ball Bearings in Terms of Performance?

Material Composition:

Ceramic Ball Bearings:

Traditional Steel Ball Bearings:

Friction and Heat:

Ceramic Ball Bearings:

Ceramic bearings have lower friction coefficients compared to steel bearings. This results in reduced heat generation during operation, contributing to higher efficiency and potential energy savings.

Traditional Steel Ball Bearings:

Steel bearings can generate more heat due to higher friction coefficients. This can lead to increased energy consumption in applications where efficiency is crucial.

Weight:

Ceramic Ball Bearings:

Ceramic bearings are lighter than steel bearings due to the lower density of ceramics. This weight reduction can be advantageous in applications where minimizing weight is important.

Traditional Steel Ball Bearings:

Steel bearings are heavier than ceramic bearings due to the higher density of steel. This weight may not be as critical in all applications but could impact overall equipment weight and portability.

Corrosion Resistance:

Ceramic Ball Bearings:

Ceramic bearings have excellent corrosion resistance, making them suitable for applications in corrosive environments, such as marine or chemical industries.

Traditional Steel Ball Bearings:

Steel bearings are susceptible to corrosion, especially in harsh environments. Stainless steel variants offer improved corrosion resistance but may still corrode over time.

Speed and Precision:

Ceramic Ball Bearings:

Traditional Steel Ball Bearings:

Cost:

Ceramic Ball Bearings:

Ceramic bearings are generally more expensive to manufacture than steel bearings due to the cost of ceramic materials and the challenges in producing precision ceramic components.

Traditional Steel Ball Bearings:

Steel bearings are often more cost-effective to manufacture, making them a more economical choice for many applications.

ball bearing

How does Lubrication Impact the Performance and Lifespan of Ball Bearings?

Friction Reduction:

Wear Prevention:

Heat Dissipation:

Corrosion Resistance:

Noise Reduction:

Seal Protection:

Lubricants help maintain the effectiveness of seals or shields that protect the bearing from contaminants. They create a barrier that prevents particles from entering the bearing and causing damage.

Improved Efficiency:

Properly lubricated ball bearings operate with reduced friction, leading to improved overall efficiency. This is especially important in applications where energy efficiency is a priority.

Lifespan Extension:

Effective lubrication significantly extends the lifespan of ball bearings. Bearings that are properly lubricated experience less wear, reduced fatigue, and a lower likelihood of premature failure.

Selection of Lubricant:

Regular Maintenance:

China OEM Double Row Best Price 90X190X64mm Self Aligning Bearing 2318 Ball Bearing bearing bronze
editor by CX 2024-05-10

China manufacturer Active-Power Industries Angular Contact Ball Bearing Ba240-3wsa/Ba240-3ASA China Factory 7311AC 162250ja 7311pd6b Angular Contact Ball Bearing connecting rod bearing

Product Description

ACTIVE-POWER INDUSTRIES Angular Contact Ball Bearing Ba240-3Wsa/Ba240-3Asa China Factory 7311AC 162250Ja 7311Pd6B Angular Contact Ball Bearing

Product Description

The connection line between the steel ball of the contact ball bearing and the contact point of the inner and outer rings forms an angle with the radial direction. Contact angles are generally divided into 15°, 30°, and 40°, which are represented by letters C, A, and B respectively.

Angular contact ball bearings mainly bear large unidirectional axial loads, and the larger the contact angle, the greater the load-bearing capacity. The material of the cage is steel plate, brass, or engineering plastic, and the forming method is stamping or turning, which is selected according to the bearing form or service conditions. Others include combined angular contact ball bearings, double-row angular contact ball bearings, and four-point contact ball bearings.

Angular contact ball bearings can bear radial load and axial load at the same time. Can work at higher speeds. The larger the contact angle, the higher the axial load-carrying capacity. High-precision and high-speed bearings usually take a contact angle of 15 degrees. Under the action of axial force, the contact angle will increase. Single-row angular contact ball bearings can only bear axial load in 1 direction and will cause additional axial force when bearing radial load. And it can only limit the axial displacement of the shaft or housing in 1 direction. If it is installed in pairs, make the outer rings of a pair of bearings face each other, that is, the wide end faces the wide end face, and the narrow end faces the narrow end face. This avoids causing additional axial forces and limits the shaft or housing to axial play in both directions.

Because the raceway of the inner and outer rings of the angular contact ball bearing can have relative displacement on the horizontal axis, it can bear radial load and axial load at the same time – combined load (single row angular contact ball bearing can only bear axial load in 1 direction, Therefore, they are generally installed in pairs). The material of the cage includes brass, synthetic resin, etc., which are distinguished according to the bearing type and service conditions.

Product Parameters

Product Name	Angular Contact Ball Bearing
Type	Angular Contact Ball Bearing
Structure	Angular Contact
Applicable Industries	The machinery manufacturing plant, machine tools, mechanical equipment, motor automobile hub, agricultural machinery
Brand Name	RPZ /LONK/XWFD/ XWFD ZMW
Accuracy class	P0, P6, P5, P4, P2 or as required20mm-500mm
Seal type	Open / 2RS
Size	20mm-500mm
Number of Rows	Single row
Origin	ZheJiang , China
Product Model	7000cac 7200c 7001acm
Material	Gcr15 chrome steel / stainless steel bearing
Features	long life, low friction, high speed
Retainer Type	Brass / bakelite / steel

Angular Contact Bearing
7000AC	7200AC	7303AC	7406AC	3304-2RS/ZZ
7001AC	7201AC	7304AC	7407ACP6	3305-2RS/ZZ
7002AC	7202AC	7305AC	7408AC	3306-2RS/ZZ
7003AC	7203AC	7306AC	7409AC	3307-2RS/ZZ
7004AC	7204AC	7307AC	7410AC	3308-2RS/ZZ
7005AC	7205AC	7308AC	7412ACM	3309-2RS/ZZ
7006AC	7206AC	7309AC	7412BM	3310-2RS/ZZ
7007AC	7207AC	7310AC	7414ACM	3311-2RS/ZZ
7008AC	7208AC	7311AC	7414BM	3312-2RS/ZZ
7009AC	7209AC	7312AC	7416ACM	3313-2RS/ZZ
7571AC	7210C	7313AC	7416BM	3314-2RS/ZZ
7011AC	7210AC	7314AC	7418ACM	3315-2RS/ZZ
7012AC	7211AC	7315AC	7418BM	3316-2RS/ZZ
7013AC	7212AC	7315BM		3317-2RS/ZZ
7014AC	7213AC	7317AC	3204-2RS/ZZ	3318-2RS/ZZ
7015AC	7214AC	7317BM	3205-2RS/ZZ	3319-2RS/ZZ
7016AC	7216AC	7318AC	3206-2RS/ZZ	3320-2RS/ZZ
7017AC	7217AC	7318BTN	3207-2RS/ZZ
7018AC	7218AC	7319AC	3208-2RS/ZZ	QJ210
7571AC	7219AC	7319BM	3209-2RS/ZZ	QJ211
7571AC	7220AC	7320AC	3210-2RS/ZZ	QJ212
7571AC	7221AC	7320BM	3211-2RS/ZZ	QJ213
7026AC	7222AC	7322AC	3212-2RS/ZZ	QJ214
7571AC	7224AC	7322BM	3213-2RS/ZZ	QJ215
7030AC	7228AC	7324ACM	3214-2RS/ZZ	QJ216
7032AC	7232AC	7324BM	3215-2RS/ZZ	QJ217
7034AC	7236AC	7326ACM	3216-2RS/ZZ	QJ218
7036AC	7240AC	7328ACM	3217-2RS/ZZ	QJ219
7038AC	7244AC	7328BM	3218-2RS/ZZ	QJ220
		7330ACM	3219-2RS/ZZ	QJ222
		7332ACM	3220-2RS/ZZ	QJ224
		7334ACM		QJ226
		7336ACM		QJ228
		7338ACM		QJ230
		7340ACM		QJ232

Company Profile

HangZhou Active-Power Industrial. is located in HangZhou, ZheJiang , China. The factory has been committed to the production research and development of bearings for more than 20 years. We support OEM and ODM bearing customization.

The main products are: Deep Groove Ball Bearing Taper Roller Bearing Tapered Roller Bearing Auto Wheel Hub Bearing Cylindrical Roller Bearing Spherical Roller Bearing Motor Bearing Needle Roller Bearing Angular Contact Ball Bearing.

FAQ

Q1:What is your Before-sales Service?
1>. Offer to bear related consultation about technology and application;

2>.Help customers with bearing choice, clearance configuration, product” life, and reliability analysis;

3>. Offer highly cost-effective and complete solution program according to site conditions;

4>. Offer localized program on introduced equipment to save running cost

Q2: What is your After-sales Service?
1>. Offer training about bearing installation and maintenance;

2>.Help customers with trouble diagnosis and failure analysis;

3>. Visit customers regularly and feedback on their rational suggestions and requirements to the company.

Q3: How about your company’s strength?
1>.FREE SAMPLES:
contact us by email or trade manager, we will send the free samples according to your request.

2>. World-Class Bearing:
We provide our customers with all types of indigenous roller bearings of world-class quality.

3>.OEM or Non-Stand Bearings:
Any requirement for Non-standard roller bearings is Easily Fulfilled by us due to our vast knowledge and links in the industry.

4>.Genuine products With Excellent Quality:
The company has always proved the 100% quality products it provides with genuine intent.

5>. After-Sales Service and Technical Assistance:
The company provides after-sales service and technical assistance as per the customer’s requirements and needs.

6>.Quick Delivery:
The company provides just-in-time delivery with its streamlined supply chain.

7>.Cost Saving:
We provide long-life, shock-resistant, and high-reliability roller bearings with excellent quality and better performance.
Resulting in increased cost savings.

Q4: What will we do if you are not satisfied with the product?
A: If have any abnormal, Please contact us at the first time, and we will immediately process

Q5: How long will you respond to our problems?
A: We will respond within 1 hour. 24 hours to solve your problem

Q6: Is optional lubrication provided?
A: We can offer a wide range of oils and greases for a variety of applications. Please contact our engineer for technical
assistance with any special requirements

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Contact Angle:	60°
Aligning:	Non-Aligning Bearing
Separated:	Separated
Rows Number:	Multiple
Load Direction:	Thrust Bearing
Material:	Brass

Samples:	US$ 0/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

ball bearing

What are the Materials Typically Used in Manufacturing Ball Bearings and Their Advantages?

High-Carbon Chrome Steel (AISI 52100):

Stainless Steel (AISI 440C, AISI 304, AISI 316):

Ceramic:

Plastic (Polyamide, PEEK):

Bronze:

Hybrid Bearings:

Specialty Alloys:

Coated Bearings:

Bearings may also be coated with thin layers of materials like diamond-like carbon (DLC) or other coatings to enhance performance, reduce friction, and improve wear resistance.

ball bearing

What are the Differences between Deep Groove Ball Bearings and Angular Contact Ball Bearings?

Design and Geometry:

Deep Groove Ball Bearings:

Angular Contact Ball Bearings:

Load Carrying Capacity:

Deep Groove Ball Bearings:

Angular Contact Ball Bearings:

Contact Angle:

Deep Groove Ball Bearings:

Deep groove ball bearings have no defined contact angle, as the balls move in a deep groove along the raceways. They are primarily designed for radial loads.

Angular Contact Ball Bearings:

Applications:

Deep Groove Ball Bearings:

Deep groove ball bearings are commonly used in applications that primarily require radial loads, such as electric motors, pumps, and conveyor systems. They are also suitable for high-speed operation.

Angular Contact Ball Bearings:

Limitations:

Deep Groove Ball Bearings:

Deep groove ball bearings are not as suitable for handling significant axial loads and may experience skidding under certain conditions due to their deep raceways.

Angular Contact Ball Bearings:

Angular contact ball bearings can experience increased heat generation and wear at higher speeds due to the contact angle of the balls.

ball bearing

How do Ball Bearings Differ from Other Types of Bearings like Roller Bearings?

Ball bearings and roller bearings are two common types of rolling-element bearings, each with distinct designs and characteristics. Here’s a comparison of ball bearings and roller bearings:

Design:

Ball Bearings: Ball bearings use spherical balls to separate and reduce friction between the bearing’s inner and outer rings. The balls enable rolling motion and smooth contact, minimizing friction.

Roller Bearings: Roller bearings, as the name suggests, use cylindrical or tapered rollers instead of balls. These rollers have larger contact areas, distributing loads over a broader surface.

Friction and Efficiency:

Ball Bearings: Due to the point contact between the balls and the rings, ball bearings have lower friction and are more efficient at high speeds.

Roller Bearings: Roller bearings have a larger contact area, resulting in slightly higher friction compared to ball bearings. They are more suitable for heavy-load applications where efficiency is prioritized over high speeds.

Load Capacity:

Ball Bearings: Ball bearings excel at handling light to moderate loads in both radial and axial directions. They are commonly used in applications where smooth rotation and low friction are important.

Roller Bearings: Roller bearings have a higher load-carrying capacity than ball bearings. They can support heavier radial and axial loads and are preferred for applications with significant loads or impact forces.

Variability:

Ball Bearings: Ball bearings come in various designs, including deep groove, angular contact, and thrust ball bearings, each suitable for different applications.

Roller Bearings: Roller bearings have diverse types, including cylindrical, spherical, tapered, and needle roller bearings, each optimized for specific load and motion requirements.

Speed Capability:

Ball Bearings: The reduced friction in ball bearings makes them suitable for high-speed applications, such as electric motors and precision machinery.

Roller Bearings: Roller bearings can handle higher loads but are generally better suited for moderate to low speeds due to slightly higher friction.

Applications:

Ball Bearings: Ball bearings are used in applications where smooth motion, low friction, and moderate loads are essential, such as electric fans, bicycles, and some automotive components.

Roller Bearings: Roller bearings find applications in heavy machinery, construction equipment, automotive transmissions, and conveyor systems, where heavier loads and durability are crucial.

In summary, ball bearings and roller bearings differ in their design, friction characteristics, load capacities, speed capabilities, and applications. The choice between them depends on the specific requirements of the machinery and the type of loads and forces involved.

China manufacturer Active-Power Industries Angular Contact Ball Bearing Ba240-3wsa/Ba240-3ASA China Factory 7311AC 162250ja 7311pd6b Angular Contact Ball Bearing connecting rod bearing
editor by CX 2024-05-10

China supplier High Temperature Resistant Deep Groove Ball Bearing 6900zz wholesaler

Product Description

Deep groove ball bearing is simple in structure and convenient in use. It is the bearing with the largest production scale and the widest application range. Widely used in automobiles, household appliances, machine tools, motors, pumps, agricultural machinery, textile machinery and many other fields.
Bearing is an important basic component of all kinds of mechanical equipment, and its accuracy, performance, life and reliability play a decisive role in the accuracy, performance, life and reliability of the host. In mechanical products, bearings belong to high-precision products, not only need the comprehensive support of mathematics, physics and many other disciplines, but also need material science, heat treatment technology, precision machining and measurement technology, numerical control technology and effective numerical methods and powerful computer technology and many other disciplines to serve, so bearing is a representative of the national scientific and technological strength of the product.

Detailed Photos

Features

1- Long service life
2- Strong carrying capacity
3- Good vibration resistance

Product Parameters

Outer material	420 stainless steel
Inner ring material	420 stainless steel
Steel ball material	440 stainless steel
Cage material	SUS 430
Dust cover material	RS
Oil and grease	SRL
Precision	P0 P6 P5
Clearance	8-13
Machinable material	Carbon steel/Ceramic /PEEK/PTFE/POM/PE/420 /440 /316 /306 /SUS630

If you need order the bearings, pls tell me the size and material, if you do not have it, pls reference below picture:

Other Products

Packaging & Shipping

FAQ

Q: Are you trading company or manufacturer ?
A: We are manufacturer.
Q: How to order ?
A: Normally you can order our products by using Made-in China platform or contacting representatives by Email.
After we receive your messages, we will help you to choose the right specifications and other inquiries.
Then we will send an proforma invoice to you via mail, it includes details of your order and our bank information.
After we received your payment by TT, we will ship your goods and we will send the invoice, packing list, and the express tracking number via mail.
Q: What is our term of trade ?
A: Usually we use EX WORKS. If you need other term of trade, please let us know.
Q: How to pay ?
A: We accept the payment by T/T (bank transfer) or pay through Made-in China platform.
Please inquire us about the details in advance.
Q: How are you going to deliver our goods ?
A: We can ship your goods either by air express (FedEx, DHL, UPS, TNT etc) or by sea.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material:	Carbon Steel/Ceramic /Peek/PTFE/POM/PE/420 /440 /3
Dust Cover Material:	RS
Oil and Grease:	SRL

Samples:	US$ 1/Piece 1 Piece(Min.Order) \| Order Sample Customed

Customization:	Available \| Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

ball bearing

What are the Challenges Associated with Noise Reduction in Ball Bearings?

Vibration:

Bearing Type and Design:

Lubrication:

Bearing Clearance and Preload:

Incorrect clearance or preload settings can lead to noise issues. Excessive clearance or inadequate preload can cause the rolling elements to impact the raceways, resulting in noise during rotation.

Material and Manufacturing Quality:

Surface Finish:

The surface finish of the rolling elements and raceways can impact noise. Rough surfaces can generate more noise due to increased friction and potential irregularities.

Sealing and Shielding:

Seals and shields that protect bearings can influence noise levels. While they are necessary for contamination prevention, they can also cause additional friction and generate noise.

Operating Conditions:

External factors such as temperature, speed, and load can influence noise levels. High speeds or heavy loads can amplify noise due to increased stress on the bearing components.

Wear and Deterioration:

As ball bearings wear over time, noise levels can increase. Worn components or inadequate lubrication can lead to more significant noise issues as the bearing operates.

ball bearing

Are there any Industry Standards or Certifications that Ball Bearings should Meet?

ISO Standards:

ABEC (Annular Bearing Engineering Committee) Ratings:

DIN Standards:

JIS (Japanese Industrial Standards):

ASTM (American Society for Testing and Materials) Standards:

ASTM has standards that cover various aspects of bearing testing, performance, and materials. ASTM F2215, for instance, specifies the requirements for ball bearings used in surgical implants.

CE Marking:

Industry-Specific Standards:

Quality Management Systems:

ball bearing

What Factors should be Considered when Selecting a Ball Bearing for a Particular Application?

Load Type and Magnitude:

Speed and Operating Conditions:

Accuracy and Precision:

For applications requiring high accuracy and precision, such as machine tool spindles or optical instruments, choose high-precision bearings that can maintain tight tolerances and minimize runout.

Space Limitations:

If the application has limited space, choose miniature or compact ball bearings that can fit within the available dimensions without compromising performance.

Thrust and Radial Loads:

Alignment and Misalignment:

If the application experiences misalignment between the shaft and housing, consider self-aligning ball bearings that can accommodate angular misalignment.

Mounting and Installation:

Consider the ease of mounting and dismounting the bearing. Some applications may benefit from features like flanges or snap rings for secure installation.

Lubrication and Maintenance:

Environmental Conditions:

Factor in the operating environment, including exposure to corrosive substances, chemicals, water, or dust. Choose materials and coatings that can withstand the specific environmental challenges.

Bearing Material:

Select a bearing material that suits the application’s requirements. Common materials include stainless steel for corrosion resistance and high-carbon chrome steel for general applications.

Bearing Arrangement:

Consider whether a single-row, double-row, or multiple bearings in a specific arrangement are needed to accommodate the loads and moments present in the application.

China supplier High Temperature Resistant Deep Groove Ball Bearing 6900zz wholesaler
editor by CX 2024-05-10