Tag Archives: parts bearing

China OEM Motor parts engine spare ball bearing 6012 2Z C3 deep groove ball bearing

Product Description

Company Profile

Motor parts engine spare ball bearing 6012 2Z C3

Deep groove bearing Specification

1.Bearing Factory more than 20 years
2.F&D,CBB brand look for distributor and agents.
3.OEM Accepted.
4.ISO9001:2000. TS16949.

The type of bearing component materials used will determine the life span, reliability and performance of the bearings. However, there are many factors affecting the performance of the bearings which include the selection of the load carrying capacity, the rolling contact conditions, and the cleanliness of the operating environment and the dimensional stability of the bearing components.

CZPT bearing company has adopted the carbon-chromium steel material(Gcr15) in our productionof the bearing.

Bearing No.	I.D		O.D		W		Loading Rating(KN)		Steel Ball Parameter		Max Speed
	d		D		B		Dynamic	Static	No.	Size	Grease	Oil
	mm	inch	mm	inch	mm	inch	Cr	Cor	No.	mm	r/min	r/min
6000	10	0.3937	26	1.5716	8	0.3150	4.55	1.95	7	4.763	29000	34000
6001	12	0.4724	28	1.1571	8	0.3150	5.10	2.39	8	4.763	26000	30000
6002	15	0.5906	32	1.2598	9	0.3543	5.60	2.84	9	4.763	22000	26000
6003	17	0.6693	35	1.3780	10	0.3937	6.80	3.35	10	4.763	20000	24000
6004	20	0.7874	42	1.6535	12	0.4724	9.40	5.05	9	6.350	18000	21000
6005	25	0.9843	47	1.8504	12	0.4724	10.10	5.85	10	6.350	15000	18000
6006	30	1.1811	55	2.1654	13	0.5118	13.20	8.30	11	7.144	13000	15000
6007	35	1.3780	62	2.4409	14	0.5512	16.00	10.30	11	7.938	12000	14000
6008	40	1.5748	68	2.6772	15	0.5906	16.80	11.50	12	7.938	10000	12000
6009	45	1.7717	75	2.9528	16	0.6299	21.00	15.10	12	8.731	9200	11000
6571	50	1.9685	80	3.1496	16	0.6299	21.80	16.60	13	8.731	8400	9800
6011	55	2.1654	90	3.5433	18	0.7087	28.30	21.20	12	11.000	7700	9000
6012	60	2.3622	95	3.7402	18	0.7087	29.50	23.20	13	11.000	7000	8300
6013	65	2.5591	100	3.9370	18	0.7087	30.50	25.20	13	11.112	6500	7700
6014	70	2.7559	110	4.3307	20	0.7874	38.00	31.00	13	12.303	6100	7100
6015	75	2.9528	115	4.5276	20	0.7874	39.50	33.50	14	12.303	5700	6700
6016	80	3.1496	125	4.9213	22	0.8661	47.50	40.00	14	13.494	5300	6200

Bearing No.	I.D		O.D		W		Loading Rating(KN)		Steel Ball Parameter		Max Speed
	d		D		B		Dynamic	Static	No.	Size	Grease	Oil
	mm	inch	mm	inch	mm	inch	Cr	Cor	No.	mm	r/min	r/min
6200	10	0.3937	30	1.1811	9	0.3543	5.10	2.39	8	4.763	25000	30000
6201	12	0.4724	32	1.2598	10	0.3937	6.10	2.75	7	5.953	22000	26000
6202	15	0.5906	35	1.3780	11	0.4331	7.75	3.60	8	5.953	19000	23000
6203	17	0.6693	40	1.5748	12	0.4724	9.60	4.60	8	6.747	18000	21000
6204	20	0.7874	47	1.8504	14	0.5512	12.80	6.65	8	7.938	16000	18000
6205	25	0.9843	52	2.571	15	0.5906	14.00	7.85	9	7.938	13000	15000
6206	30	1.1811	62	2.4409	16	0.6299	19.50	11.30	9	9.525	11000	13000
6207	35	1.3780	72	2.8346	17	0.6693	25.70	15.30	9	11.112	9800	11000
6208	40	1.5748	80	3.1496	18	0.7087	29.10	17.80	9	12.000	8700	10000
6209	45	1.7717	85	3.3465	19	0.7480	32.50	20.40	10	12.000	7800	9200
6210	50	1.9685	90	3.5433	20	0.7874	35.00	23.20	10	12.700	7100	8300
6211	55	2.1654	100	3.9370	21	0.8268	43.50	29.20	10	14.288	6400	7600
6212	60	2.3622	110	4.3307	22	0.8661	52.50	36.00	10	15.081	6000	7000
6213	65	2.5591	120	4.7244	23	0.9055	57.50	40.00	10	16.669	5500	6500
6214	70	2.7559	125	4.9213	24	0.9449	62.00	44.00	11	16.462	5100	6000
6215	75	2.9528	130	5.1181	25	0.9843	66.00	49.50	11	17.462	4800	5600
6216	80	3.1496	140	5.5118	26	1.5716	72.50	53.00	11	18.256	4500	5300
6217	85	3.3465	150	5.9055	28	1.1571	83.50	64.00	11	19.844	4200	5000
6218	90	3.5433	160	6.2992	30	1.1811	96.00	71.50	10	22.225	4000	4700

Bearing No.	I.D		O.D		W		Loading Rating(KN)		Steel Ball Parameter		Max Speed
	d		D		B		Dynamic	Static	No.	Size	Grease	Oil
	mm	inch	mm	inch	mm	inch	Cr	Cor	No.	mm	r/min	r/min
6300	10	0.3937	35	1.3780	11	0.4331	8.20	3.50	6	7.144	23000	27000
6301	12	0.4724	37	1.4567	12	0.4724	9.70	4.20	6	7.938	20000	24000
6302	15	0.5906	42	1.6535	13	0.5118	11.40	5.45	7	7.938	17000	21000
6303	17	0.6693	47	1.8504	14	0.5512	13.50	6.55	7	8.731	16000	19000
6304	20	0.7874	52	2.571	15	0.5906	15.90	7.90	7	9.525	14000	27000
6305	25	0.9843	62	2.4409	17	0.6693	21.20	10.90	7	11.500	12000	14000
6306	30	1.1811	72	2.8346	19	0.7480	26.70	15.00	8	12.000	10000	12000
6307	35	1.3780	80	3.1496	21	0.8268	33.50	19.10	8	13.494	8800	10000
6308	40	1.5748	90	3.5433	23	0.9055	40.50	24.00	8	15.081	7800	9200
6309	45	1.7717	100	3.9370	25	0.9843	53.00	32.00	8	17.462	7000	8200
6310	50	1.9685	110	4.3307	27	1.0630	62.00	38.50	8	19.050	6400	7500
6311	55	2.1654	120	4.7244	29	1.1417	71.50	45.00	8	20.638	5800	6800
6312	60	2.3622	130	5.1181	31	1.2205	82.00	52.00	8	22.225	5400	6300
6313	65	2.5591	140	5.5118	33	1.2992	92.50	60.00	8	24.000	4900	5800
6314	70	2.7559	150	5.9055	35	1.3780	104.00	68.00	8	25.400	4600	5400
6315	75	2.9528	160	6.2992	37	1.4567	113.00	77.00	8	26.988	4300	5000
6316	80	3.1496	170	6.6929	39	1.5354	123.00	86.50	8	28.575	4000	4700

Packaging & Shipping

Packaging Detail	1.Industrial Exporting Package with anti-tarnish paper/Carton/Pallet 2. Individual plastic/Carton/pallet 3. As the customers’ requirements
Delivery Detail	30-45 days for normal order

One of the leading bearing manufacturers and exporters in China

China CZPT Bearing Corporation was established in 1996 and is 1 of the leading bearing manufacturers and exporters in China. CZPT specializes in the design and production of high quality, high precision deep groove ball bearings and pillow block bearings. At present, the Corporation has more than 1,000 employees, a fixed assets of 1.05 billion yuan, and produces 250 million sets of bearings annually. In 2571, the Corporation achieved bearing sales of 650 million yuan. The Corporation’s products are widely used in more than 50 countries and regions under 2 independent brands, namely “F&D” and “FLATE”. Now CZPT created new brand “CBB”.

Research and Development

Since 2008, the Corporation has set up a Research & Development Center equipped with multiple laboratories used for precision measurement, mechanical testing, lifespan testing, and physicochemical testing, to continuously upgrade its skills and raise its manufacturing standard and product’s precision. Our workshops are installed with a series of advanced numerically-controlled, grinding and assembly equipment that utilize centralized filtration and cooling systems. Together with the production equipment suppliers, we developed these grinding, ultra-precision, fully automated integrated production lines, and own the intellectual property rights. The precision level of the products are at P5 level and above, with noise level CZPT Z4, V4 and above. Some of our projects have exceeded the 30% precision reserves. Our products are widely used in electric motors, automobiles, motorcycles, household appliances, textile, electric tools and water pump equipment industries, both locally and globally.

Our Trade Partner

Why Choose US

About US

Fuda Bearing Corporation Co., Ltd. was founded in 1996, and became 1 of Chinese largest bearing manufacturers and exporters. which specializes in designing and producing deep groove ball bearings, pillow block bearings with high quality & precision. After more than 10 years’hard work, CZPT has developed into a high-tech company that is capable of bearing research & development, manufacturing, and marketing. The Corporation consists of 5 subsidiaries including ZHangZhoug CZPT Bearing Co., Ltd, Flate Precision Tech. Co.,Ltd, HangZhou Unit Machinery Co., Ltd, HangZhou Oyat Bearing Co.,Ltd, CZPT Bearing Corporation Imp.& Exp.Co.Ltd. Now CZPT has employees more than 1000 with the fixed assets of RMB 1.05 billion. And the annual production capacity can reach 25 million sets. In 2571, the bearing sales volume was RMB 650 millions.Besides it creates 2 self-owned brands called F&Dand FLATE. The products are well received in more than 50 countries and regions.

Certifications

Quality Assurance
Product quality is the lifeline of an enterprise. In order to possessing the leading technology, our company implements the quality control system and establishes a technical and strict inspection team. As per the regulation of three-dimensional management and multiple checks, each product was inspected by the producer, inspector, inspection department and quality department elaborately, especially to the important inspection items and precision inspection item.

Our Service
High quality, good credit and excellent service are the tenet of our company. Customers’satisfaction is our lifeline, as well as our highest honor. We will do our best to meet your requirements, and will do better in the future.

Marketing

Thanks for your time to review our CZPT bearing (F&D bearing brand) !!!

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Aligning:	Non-Aligning Bearing
Separated:	Unseparated
Rows Number:	Single
Load Direction:	Radial Bearing
Vibration:	V2 /V3/V4
Item name:	ball bearing

Samples:	US$ 0.1/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

ball bearing

What are the Challenges Associated with Noise Reduction in Ball Bearings?

Noise reduction in ball bearings is a crucial consideration, especially in applications where noise levels must be minimized for operational efficiency and user comfort. While ball bearings are designed to operate smoothly, there are several challenges associated with reducing noise in their operation:

Vibration:

Vibration generated by the movement of rolling elements and raceways can lead to noise. Even minor irregularities in bearing components or the mounting system can cause vibration that translates into audible noise.

Bearing Type and Design:

The type and design of the ball bearing can impact noise generation. For example, deep groove ball bearings are known for their quiet operation, while angular contact bearings can generate more noise due to their higher contact angles.

Lubrication:

Improper or inadequate lubrication can result in increased friction and wear, leading to noise. Choosing the right lubricant and maintaining proper lubrication levels are essential for reducing noise in ball bearings.

Bearing Clearance and Preload:

Incorrect clearance or preload settings can lead to noise issues. Excessive clearance or inadequate preload can cause the rolling elements to impact the raceways, resulting in noise during rotation.

Material and Manufacturing Quality:

The quality of materials and manufacturing processes can affect noise levels. Inconsistent or low-quality materials, improper heat treatment, or manufacturing defects can lead to noise generation during operation.

Surface Finish:

The surface finish of the rolling elements and raceways can impact noise. Rough surfaces can generate more noise due to increased friction and potential irregularities.

Sealing and Shielding:

Seals and shields that protect bearings can influence noise levels. While they are necessary for contamination prevention, they can also cause additional friction and generate noise.

Operating Conditions:

External factors such as temperature, speed, and load can influence noise levels. High speeds or heavy loads can amplify noise due to increased stress on the bearing components.

Wear and Deterioration:

As ball bearings wear over time, noise levels can increase. Worn components or inadequate lubrication can lead to more significant noise issues as the bearing operates.

To address these challenges and reduce noise in ball bearings, manufacturers and engineers employ various techniques, such as optimizing design, selecting suitable bearing types, using proper lubrication, maintaining accurate preload settings, and ensuring high-quality materials and manufacturing processes. Noise reduction efforts are essential to improve overall product quality, meet noise regulations, and enhance user experience in various applications.

ball bearing

How do Miniature Ball Bearings Differ from Standard-sized Ones, and Where are They Commonly Used?

Miniature ball bearings, as the name suggests, are smaller in size compared to standard-sized ball bearings. They have distinct characteristics and are designed to meet the unique requirements of applications that demand compactness, precision, and efficient rotation in confined spaces. Here’s how miniature ball bearings differ from standard-sized ones and where they are commonly used:

Size:

The most noticeable difference is their size. Miniature ball bearings typically have outer diameters ranging from a few millimeters to around 30 millimeters, while standard-sized ball bearings have larger dimensions suitable for heavier loads and higher speeds.

Load Capacity:

Due to their smaller size, miniature ball bearings have lower load-carrying capacities compared to standard-sized bearings. They are designed for light to moderate loads and are often used in applications where precision and compactness are prioritized over heavy load support.

Precision:

Miniature ball bearings are known for their high precision and accuracy. They are manufactured to tighter tolerances, making them suitable for applications requiring precise motion control and low levels of vibration.

Speed:

Miniature ball bearings can achieve higher speeds than standard-sized bearings due to their smaller size and lower mass. This makes them ideal for applications involving high-speed rotation.

Friction and Efficiency:

Miniature ball bearings generally have lower friction due to their smaller contact area. This contributes to higher efficiency and reduced heat generation in applications that require smooth and efficient motion.

Applications:

Miniature ball bearings find applications in various industries and sectors:

Electronics and Consumer Devices:

They are used in small motors, computer disk drives, printers, and miniature fans, where space is limited but precise motion is essential.

Medical and Dental Equipment:

Miniature bearings are used in medical devices such as surgical instruments, dental handpieces, and diagnostic equipment due to their precision and compactness.

Robotics and Automation:

Miniature ball bearings are integral to robotic arms, miniature conveyors, and automation systems, enabling precise movement in confined spaces.

Aerospace and Defense:

They are used in applications like UAVs (drones), aerospace actuators, and satellite components where size and weight constraints are critical.

Optics and Instrumentation:

Miniature bearings play a role in optical instruments, cameras, and measuring devices, providing smooth rotation and accurate positioning.

Overall, miniature ball bearings are specialized components designed for applications where space, precision, and efficient rotation are paramount. Their compactness and high precision make them crucial in various industries requiring reliable motion control in limited spaces.

ball bearing

What are the Primary Benefits of Using Ball Bearings in Machinery and Equipment?

Ball bearings offer several primary benefits when used in machinery and equipment. Their design and functionality provide advantages that contribute to the efficient and reliable operation of various applications. Here are the key benefits:

Reduced Friction:

One of the primary benefits of ball bearings is their ability to minimize friction between moving parts. The rolling motion of the balls reduces the contact area and sliding friction, leading to smoother operation and less energy loss due to frictional heating.

Efficient Load Support:

Ball bearings are engineered to support both radial and axial loads, making them versatile for applications with multidirectional forces. This load-bearing capability allows machinery to handle different types of loads while maintaining performance and stability.

Smooth Rotation:

Ball bearings enable smooth and precise rotational movement. The rolling motion of the balls provides consistent motion with minimal resistance, ensuring that machinery operates smoothly and without jerks.

High-Speed Capability:

Due to their low friction and efficient rolling action, ball bearings are suitable for high-speed applications. They allow machinery and equipment to achieve and maintain high rotational speeds without excessive wear or heat buildup.

Reduced Wear and Maintenance:

The reduced friction in ball bearings leads to lower wear on components. This results in longer service intervals and reduced maintenance requirements, saving both time and maintenance costs.

Energy Efficiency:

By minimizing friction and reducing energy losses, ball bearings contribute to the overall energy efficiency of machinery. This is particularly important in applications where energy consumption is a concern.

Versatility:

Ball bearings come in various types, sizes, and configurations, allowing them to be used in a wide range of machinery and equipment. They can be customized to suit specific application requirements.

Reliability and Longevity:

Ball bearings are designed to withstand heavy loads and harsh operating conditions. Their durability and resistance to wear ensure reliable performance and an extended operational life.

Quiet Operation:

Ball bearings contribute to quiet machinery operation due to the smooth rolling motion of the balls. This is particularly important in applications where noise reduction is a consideration.

In summary, the primary benefits of using ball bearings in machinery and equipment include reduced friction, efficient load support, smooth rotation, high-speed capability, reduced wear and maintenance, energy efficiency, versatility, reliability, and quiet operation. These benefits collectively enhance the performance and longevity of machinery across various industries.

China OEM Motor parts engine spare ball bearing 6012 2Z C3 deep groove ball bearing
editor by CX 2024-04-24

China manufacturer Deep Groove Ball Bearings 6801 6800 6203 6204 6205 Zz 2RS C3 Auto Parts Machining Parts Industrial Ball Bearing carrier bearing

Product Description

Deep Groove Ball Bearings 6205 Zz 2RS C3 Auto Parts Machining Parts Industrial Ball Bearing
We produce all kinds of bearing sets, limit sets, widely used in agricultural machinery parts, auto parts, bearing production, construction machinery parts.

Bearing Pictures

Similar products

Company Certificates

Q:Why choose us ?
A. we are a manufacturer, we have manufactured types of bearing for over 20 years .
B. Reliable Quality Assurance System;
C. Cutting-Edge Computer-Controlled CNC Machines;
D. Bespoke Solutions from Highly Experienced Specialists;
E. Customization and OEM Available for Specific Application;
F. Extensive Inventory of Spare Parts and Accessories;
G. Well-Developed Worldwide Marketing Network;
H. Efficient After-Sale Service System

Q. what is your payment term?
A: 30% TT deposit, 70% balance T/T before shipping.

Q:Can we print our logo on your products?
A: yes, we offer OEM/ODM service, we support the customized logo, size, package,etc.

Q: Can you make chains according to my CAD drawings?
A: Yes. Besides the regular standard chains, we produce non-standard and custom-design products to meet the specific technical requirements. In reality, a sizable portion of our production capacity is assigned to make non-standard products.

Q: what is your main market?
A: North America, South America, Eastern Europe, Western Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia,

Q: Can I get samples from your factory?
A: Yes, Samples can be provided.

Q: If products have some quality problem, how would you deal with?
A: We will responsible for all the quality problems.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Contact Angle:	60°
Aligning:	Non-Aligning Bearing
Separated:	Separated

Samples:	US$ 1/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \| Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

ball bearing

Can you Provide Examples of Industries where Ball Bearings are Crucial Components?

Ball bearings are essential components in a wide range of industries where smooth motion, load support, and precision are vital. Here are some examples of industries where ball bearings play a crucial role:

Automotive Industry:

Ball bearings are used in various automotive applications, including wheel hubs, transmissions, engines, steering systems, and suspension components. They provide reliable rotation and support in both passenger vehicles and commercial vehicles.

Aerospace Industry:

In the aerospace sector, ball bearings are found in aircraft engines, landing gear systems, control surfaces, and avionics equipment. Their ability to handle high speeds and precision is vital for aviation safety.

Industrial Machinery:

Ball bearings are integral to a wide range of industrial machinery, including pumps, compressors, conveyors, machine tools, printing presses, and textile machinery. They facilitate smooth operation and load distribution in these diverse applications.

Medical Equipment:

In medical devices and equipment, ball bearings are used in surgical instruments, imaging equipment, dental tools, and laboratory machinery. Their precision and smooth movement are crucial for accurate diagnostics and treatments.

Robotics and Automation:

Ball bearings are key components in robotic arms, automation systems, and manufacturing machinery. They enable precise movement, high-speed operation, and reliable performance in automated processes.

Renewable Energy:

Wind turbines and solar tracking systems utilize ball bearings to enable efficient rotation and tracking of the wind blades and solar panels. Ball bearings withstand the dynamic loads and environmental conditions in renewable energy applications.

Marine and Shipbuilding:

Ball bearings are used in marine applications such as ship propulsion systems, steering mechanisms, and marine pumps. They withstand the corrosive environment and provide reliable performance in maritime operations.

Heavy Equipment and Construction:

In construction machinery like excavators, bulldozers, and cranes, ball bearings support the movement of heavy loads and enable efficient operation in demanding environments.

Electronics and Consumer Appliances:

Consumer electronics like electric motors, computer hard drives, and household appliances rely on ball bearings for smooth motion and reliable operation.

Oil and Gas Industry:

In oil and gas exploration and extraction equipment, ball bearings are used in drilling rigs, pumps, and processing machinery. They handle the high loads and harsh conditions of this industry.

These examples demonstrate how ball bearings are indispensable components in various industries, contributing to the efficiency, reliability, and functionality of diverse mechanical systems and equipment.

ball bearing

What are the Differences between Deep Groove Ball Bearings and Angular Contact Ball Bearings?

Deep groove ball bearings and angular contact ball bearings are two common types of ball bearings, each designed for specific applications and load conditions. Here are the key differences between these two types of bearings:

Design and Geometry:

Deep Groove Ball Bearings:

Deep groove ball bearings have a simple design with a single row of balls that run along deep raceways in both the inner and outer rings. The rings are usually symmetrical and non-separable, resulting in a balanced load distribution.

Angular Contact Ball Bearings:

Angular contact ball bearings have a more complex design with two rows of balls, oriented at an angle to the bearing’s axis. This arrangement allows for the transmission of both radial and axial loads, making them suitable for combined loads and applications requiring high precision.

Load Carrying Capacity:

Deep Groove Ball Bearings:

Deep groove ball bearings are primarily designed to carry radial loads. They can handle axial loads in both directions, but their axial load-carrying capacity is generally lower compared to angular contact ball bearings.

Angular Contact Ball Bearings:

Angular contact ball bearings are specifically designed to handle both radial and axial loads. The contact angle between the rows of balls determines the bearings’ axial load-carrying capacity. They can handle higher axial loads and are commonly used in applications with thrust loads.

Contact Angle:

Deep Groove Ball Bearings:

Deep groove ball bearings have no defined contact angle, as the balls move in a deep groove along the raceways. They are primarily designed for radial loads.

Angular Contact Ball Bearings:

Angular contact ball bearings have a specified contact angle between the rows of balls. This contact angle allows them to carry both radial and axial loads and is crucial for their ability to handle combined loads.

Applications:

Deep Groove Ball Bearings:

Deep groove ball bearings are commonly used in applications that primarily require radial loads, such as electric motors, pumps, and conveyor systems. They are also suitable for high-speed operation.

Angular Contact Ball Bearings:

Angular contact ball bearings are used in applications where both radial and axial loads are present, such as in machine tools, automotive wheel hubs, and aerospace components. They are especially useful for applications that require precise axial positioning and handling of thrust loads.

Limitations:

Deep Groove Ball Bearings:

Deep groove ball bearings are not as suitable for handling significant axial loads and may experience skidding under certain conditions due to their deep raceways.

Angular Contact Ball Bearings:

Angular contact ball bearings can experience increased heat generation and wear at higher speeds due to the contact angle of the balls.

In summary, the design, load-carrying capacity, contact angle, and applications differ between deep groove ball bearings and angular contact ball bearings. Choosing the appropriate type depends on the specific load conditions and requirements of the application.

ball bearing

What are the Primary Benefits of Using Ball Bearings in Machinery and Equipment?

Reduced Friction:

Efficient Load Support:

Smooth Rotation:

High-Speed Capability:

Reduced Wear and Maintenance:

The reduced friction in ball bearings leads to lower wear on components. This results in longer service intervals and reduced maintenance requirements, saving both time and maintenance costs.

Energy Efficiency:

Versatility:

Ball bearings come in various types, sizes, and configurations, allowing them to be used in a wide range of machinery and equipment. They can be customized to suit specific application requirements.

Reliability and Longevity:

Ball bearings are designed to withstand heavy loads and harsh operating conditions. Their durability and resistance to wear ensure reliable performance and an extended operational life.

Quiet Operation:

Ball bearings contribute to quiet machinery operation due to the smooth rolling motion of the balls. This is particularly important in applications where noise reduction is a consideration.

China manufacturer Deep Groove Ball Bearings 6801 6800 6203 6204 6205 Zz 2RS C3 Auto Parts Machining Parts Industrial Ball Bearing carrier bearing
editor by CX 2024-04-24

China factory CNC Auto Parts Linear Module Guide Sc50 Heavy Load Linear Ball Bearing bearing assembly

Product Description

Linear motion bearings with Chrome plated hardness linear shafts

Company Profile

HangZhou Wangong Precision Machinery Co., Ltd.

About US: Professional producing Ball screw, Linear guide, linear shaft, Linear roller CZPT and linear motion bearings
HangZhou Wangong Precision Machinery Co., Ltd was founded in 2008 and is located in HangZhou City, ZHangZhoug Pro. China. We ahve built a R&D and profuction base of more than 52000m², Our expertise lies in manufacturing precision transmission components, As a distinguished high-tech enterprise, we seamlessly integrate research and development, production, sales, and service. We have successfully incorporated advanced equipment and cutting-edge technologies from renowned countries like Germany, Japan and ZheJiang .

Product Description

1,Product General information
a, Low frictional linear motion
Steel balls are accurately guided by a retainer, so low frictional resistance and stable linear motion can be achieved.
Simple replacement of conventional plain bushings
It is easy to use Linear Bushings instead of conventional plain bushings, because both types are used with a round shaft, and no major redesign is necessary.
b, Wide variations
For each dimensional series, standard, adjustable clearance and open types are available with and without seals, so the best linear bushing for the application may be selected. In addition to the standard type, the high-rigidity long type is available. These types can be selected to suit the requirements in applications.
c, Miniature linear bushing LM Compact design
Miniature Linear Bushing is very small in size, allowing for compact assembly in machines and equipment.

d,High Reliability

ERSK linear bearing has very stringent quality control standards covering every production process. With proper lubrication and use,trouble-free operation for an extended period of time is possible.

e,Smooth Operation

The high efficiency of linear shaft is vastly superior to conventional shaft. The torque required is less than 30%. Linear motion can be easily changed from rotary motion. The linear bearings are moved very smoothly in the linear shaft.

f,High Durability

Rigidly selected materials, intensive heat treating and processing techniques, backed by years of experience,have resulted in the most durable linear bearings manufactured.

g,Easy interchangable

h,Easy maintenance

the linear rails can replace the base surface installation, the old wear parts (rails and blocks) can be replaced, reduce costs.

i,Easy installation

the linear rails and carriages can be changed easily, reduce material costs, reduce product prices, reduce product replacement costs and time.

2,All kinds of linear motion bearing series

SC-V series	SC8V, SC10V, SC12V, SC13V, SC16V, SC20V, SC25V, SC30V, SC35V, SC40V, SC50V, SC60V
SC-UU/SC-AJ series	SC6, SC8, SC10, SC12, SC13, SC16, SC20, SC25, SC30, SC35, SC40, SC50, SC60
SC-L /SC-LAJ series	SC8L,SC10L, SC12L, SC13L, SC16L, SC20L, SC25L, SC30L, SC35L, SC40L, SC50L, SC60L
SCE-V series	SCE8V, SCE12V, SCE16V, SCE20V, SCE25V, SCE30V, SCE40V, SCE50V
SCE-UU/SCE-AJ series	SCE8, SCE10, SCE12, SCE16, SCE20, SCE25, SCE30, SCE40, SCE50, SCE60
SCE-L/SCE-LAJ series	SCE8L, SCE10L, SCE12L, SCE16L, SCE20L, SCE25L, SCE30L, SCE40L, SCE50L

SC-V/SCE-V

SC-UU/SCE-UU

SC-AJ/SCE-AJ

SC-L/SCE-L

SC-LAJ/SCE-LAJ

SHF

linear motion support

linear bearing support

3,Specifications:

SPECIFICATIONS for linear blocks
Items	Material	Surface Treatment
Linear bearing SC, SC-AJ, SC-L, SC-AJ-L	Aluminium alloy	Clear Anodized
Linear bearing SCE, SCE-AJ, SCE-L, SCE-AJ-L	Aluminium alloy	Clear Anodized
Linear shaft support SHF	Aluminium alloy	Clear Anodized
Linear shaft support SK	Aluminium alloy	Clear Anodized
Linear shaft dia4 to dia120	S45C or GCr15	Induction heating and chrome plated
Linear bushing LM,LM-AJ, LM-L, LM-AJ-L	GCr15	Induction heating or electroless nickel plating
Linear bushing LME, LME-AJ, LME-L, LME-AJ-L	GCr15	Induction heating or electroless nickel plating

Detailed Photos

4,Detailed Images: High Precision Linear Bearing Linear Block

Machine Parts

Name: linear shaft
Brand: ERSK
Original: China
the linear shaft length can be customized according to your requirements. if the shaft need be done the machinized, please send the drawings, we are CZPT to do them

Machine Parts

Name: Linear block
Brand: ERSK
Original: China
aluminium alloy case,
good surface and high precision
moving smoothly
high interchangable

Main Features

Name: SK series
Brand: ERSK
Original: China
SK series linear shaft support,
high interchangable
mounted easily
good surface and high precision

Main Features

Name: linear ball bearing
Brand: ERSK
Original: China
GCr15 balls in the linear bearing

moving smoothly
high interchangable

Linear guide block is divied to flange type and slim type without flange.or Seal type block,

Standard type block, Double bearing type block, Short type block. Also, linear block is divided to high load capacity with standard block lenth and ultra high load capacity with longer block length.

Specification:
1,In stock
2,Performance: antifriction, interchangeable
3,Material:Aluminium allooy
4,Application: CNC or automatic machinery
5, Match: could match with linear guide or linear shaft in one machinery

5 Production Process:

Application:	Warehouse Crane, Shipboard Crane, Goods Yard Crane, Building Crane, Workshop Crane
Material:	Aluminium
Structure:	Linear Guide

How does Preload Affect the Performance and Efficiency of Ball Bearings?

Preload is a crucial factor in ball bearing design that significantly impacts the performance, efficiency, and overall behavior of the bearings in various applications. Preload refers to the intentional axial force applied to the bearing’s rolling elements before it is mounted. This force eliminates internal clearance and creates contact between the rolling elements and the raceways. Here’s how preload affects ball bearing performance:

Reduction of Internal Clearance:

Applying preload reduces the internal clearance between the rolling elements and the raceways. This eliminates play within the bearing, ensuring that the rolling elements are in constant contact with the raceways. This reduced internal clearance enhances precision and reduces vibrations during operation.

Increased Stiffness:

Preloaded bearings are stiffer due to the elimination of internal clearance. This increased stiffness improves the bearing’s ability to handle axial and radial loads with higher accuracy and minimal deflection.

Minimized Axial Play:

Preload minimizes or eliminates axial play within the bearing. This is especially important in applications where axial movement needs to be minimized, such as machine tool spindles and precision instruments.

Enhanced Rigidity:

The stiffness resulting from preload enhances the bearing’s rigidity, making it less susceptible to deformation under load. This is critical for maintaining precision and accuracy in applications that require minimal deflection.

Reduction in Ball Slippage:

Preload reduces the likelihood of ball slippage within the bearing, ensuring consistent contact between the rolling elements and the raceways. This leads to improved efficiency and better load distribution.

Improved Running Accuracy:

Preloading enhances the running accuracy of the bearing, ensuring that it maintains precise rotational characteristics even under varying loads and speeds. This is essential for applications requiring high accuracy and repeatability.

Optimized Performance at High Speeds:

Preload helps prevent skidding and slipping of the rolling elements during high-speed operation. This ensures that the bearing remains stable, reducing the risk of noise, vibration, and premature wear.

Impact on Friction and Heat Generation:

While preload reduces internal clearance and friction, excessive preload can lead to higher friction and increased heat generation. A balance must be struck between optimal preload and minimizing friction-related issues.

Application-Specific Considerations:

The appropriate amount of preload depends on the application’s requirements, such as load, speed, accuracy, and operating conditions. Over-preloading can lead to increased stress and premature bearing failure, while under-preloading may result in inadequate rigidity and reduced performance.

Overall, preload plays a critical role in optimizing the performance, accuracy, and efficiency of ball bearings. Engineers must carefully determine the right preload level for their specific applications to achieve the desired performance characteristics and avoid potential issues related to overloading or inadequate rigidity.

ball bearing

How do Temperature and Environmental Conditions Affect the Performance of Ball Bearings?

Temperature and environmental conditions have a significant impact on the performance and longevity of ball bearings. The operating environment can influence factors such as lubrication effectiveness, material properties, and overall bearing behavior. Here’s how temperature and environmental conditions affect ball bearing performance:

Lubrication:

Temperature variations can affect the viscosity and flow characteristics of lubricants. Extreme temperatures can cause lubricants to become too thin or too thick, leading to inadequate lubrication and increased friction. In high-temperature environments, lubricants can degrade, reducing their effectiveness.

Material Properties:

Temperature changes can alter the material properties of the bearing components. High temperatures can lead to thermal expansion, affecting bearing clearances and potentially causing interference between components. Extreme cold temperatures can make materials more brittle and prone to fracture.

Clearance Changes:

Temperature fluctuations can cause changes in the internal clearance of ball bearings. For instance, at high temperatures, materials expand, leading to increased clearance. This can affect bearing performance, load distribution, and overall stability.

Corrosion and Contamination:

Harsh environmental conditions, such as exposure to moisture, chemicals, or abrasive particles, can lead to corrosion and contamination of bearing components. Corrosion weakens the material, while contamination accelerates wear and reduces bearing life.

Thermal Stress:

Rapid temperature changes can result in thermal stress within the bearing components. Differential expansion and contraction between the inner and outer rings can lead to stress and distortion, affecting precision and bearing integrity.

Noise and Vibration:

Temperature-related changes in material properties and internal clearances can influence noise and vibration levels. Extreme temperatures can lead to increased noise generation and vibration, affecting the overall operation of machinery.

Lubricant Degradation:

Environmental factors like humidity, dust, and contaminants can lead to premature lubricant degradation. Oxidation, moisture absorption, and the presence of foreign particles can compromise the lubricant’s performance and contribute to increased friction and wear.

Seal Effectiveness:

Seals and shields that protect bearings from contaminants can be affected by temperature fluctuations. Extreme temperatures can lead to seal hardening, cracking, or deformation, compromising their effectiveness in preventing contamination.

Choosing Appropriate Bearings:

When selecting ball bearings for specific applications, engineers must consider the expected temperature and environmental conditions. High-temperature bearings, bearings with specialized coatings, and those with enhanced sealing mechanisms may be necessary to ensure reliable performance.

Overall, understanding the impact of temperature and environmental conditions on ball bearing performance is crucial for proper bearing selection, maintenance, and ensuring optimal operation in diverse industries and applications.

ball bearing

What are the Primary Benefits of Using Ball Bearings in Machinery and Equipment?

Reduced Friction:

Efficient Load Support:

Smooth Rotation:

High-Speed Capability:

Reduced Wear and Maintenance:

The reduced friction in ball bearings leads to lower wear on components. This results in longer service intervals and reduced maintenance requirements, saving both time and maintenance costs.

Energy Efficiency:

Versatility:

Ball bearings come in various types, sizes, and configurations, allowing them to be used in a wide range of machinery and equipment. They can be customized to suit specific application requirements.

Reliability and Longevity:

Ball bearings are designed to withstand heavy loads and harsh operating conditions. Their durability and resistance to wear ensure reliable performance and an extended operational life.

Quiet Operation:

Ball bearings contribute to quiet machinery operation due to the smooth rolling motion of the balls. This is particularly important in applications where noise reduction is a consideration.

China factory CNC Auto Parts Linear Module Guide Sc50 Heavy Load Linear Ball Bearing bearing assembly
editor by CX 2024-04-17

China OEM Gcr15 Ceiling Fan Ball Bearing 6203 for Auto Parts bearing driver kit

Product Description

BEARING INNER RING
A steel ball with a common steel ball or roller rolling on the outer surface of the inner ring.
RUBBER SEALAFTER CODE: RS 2RS Z ZZ
The sealing material is made of skeleton rubber and has good dust-proof effect, which can prevent any foreign matter from invading and dust and water in a harsh environment.

Main Features1.Bearing moves very Fast & Quiet, with very smooth hand feeling
2.High precision, long life, low noise
3.High-end technology
4.Good after-sales service

Company Profile

HangZhou CZPT Machinery Technology Co., Ltd is industry and trade company which modern enterprise integrating scientific research, development, manufacture and trading. Based on integrity, responsibility and cooperation, our company have professional R&D and sales team, providing one-stop service for customers. Our company mainly products is Bearing, Jack Hammer, Screw Air Compressor, Piston Air Compressor and Other Machinery Hardware Product etc.

After many years of production and research and development, we have obtained more than 20 national patents. The products are sold at home and abroad and are well received by customers. Our products sold at home and abroad, after get the self-managemert import and export rights, our products are exported to Vietnam, Indonesia, Philippines, Cambodia, Pakistan, Afghanistan and other countries and regions.

Application

Electric motors and generators
Agriculture
Material handling
Industrial transmissions
Food and beverage
Industrial pumps
Industrial fans
Two and 3 wheelers
Cars and light trucks

Packaging & Shipping

Customer feedback

FAQ

Q1: Are you factory or trade company?
A1: We are factory. And we have our own trading company.

Q2: What the exactly address of your factory?
A2: Our company is located in Xihu (West Lake) Dis. East Road, Xihu (West Lake) Dis. District, HangZhou, ZHangZhoug, China.

Q3: Will you provide some free samples?
A3: Yes, sure, but the freight need to be paid by you.

Q4: Which payment term can you accept?
A4: 30% T/T in advance, 70% T/T against the B/L copy.

Q5: Can you accept OEM orders?
A5: Yes, with professional design team, OEM orders are highly welcome.

Q6: Which trade term can you accept?
A6: Available trade terms: FOB, CIF, CFR, EXW, CPT, etc.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Provided
Type:	Engine Bearing
Material:	Chrome Steel
Tolerance:	P0
Clearance:	C2
ABS:	Without ABS

Samples:	US$ 0/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

ball bearing

What are the Common Signs of Wear or Damage in Ball Bearings that Indicate the Need for Replacement?

Ball bearings are subjected to wear and stress during operation, and over time, they may exhibit signs of damage or deterioration that warrant replacement. Recognizing these signs is crucial to prevent catastrophic failure and ensure safe and reliable operation. Here are the common signs of wear or damage in ball bearings:

Unusual Noise:

If you hear unusual grinding, clicking, or rumbling noises coming from the bearing during operation, it may indicate worn-out or damaged components. Unusual noise suggests that the bearing is no longer operating smoothly.

Vibration:

Excessive vibration in the machinery can be a sign of bearing wear. Vibrations can result from uneven wear, misalignment, or damaged components within the bearing.

Increased Temperature:

Higher operating temperatures than usual may indicate increased friction due to inadequate lubrication, wear, or other issues. Monitoring the bearing’s temperature can help identify potential problems.

Irregular Movement:

If you notice irregular movement, jerking, or sticking during rotation, it could be a sign that the bearing is no longer operating smoothly. This may be due to damaged rolling elements or raceways.

Reduced Performance:

If the machinery’s performance has decreased, it may be due to a compromised bearing. Reduced efficiency, increased energy consumption, or a decline in overall performance could be indicators of bearing wear.

Visible Wear or Damage:

Inspect the bearing for visible signs of wear, such as pitting, scoring, or discoloration on the rolling elements or raceways. Severe wear or damage is a clear indication that the bearing needs replacement.

Leakage or Contamination:

If there is evidence of lubricant leakage, contamination, or the presence of foreign particles around the bearing, it suggests that the seal or shield may be compromised, leading to potential damage.

Looseness or Excessive Play:

If you can feel excessive play or looseness when manually moving the bearing, it could indicate worn-out components or misalignment.

Reduced Lifespan:

If the bearing’s expected lifespan is significantly shorter than usual, it may be due to inadequate lubrication, excessive loads, or improper installation, leading to accelerated wear.

Frequent Failures:

If the bearing is consistently failing despite regular maintenance and proper use, it could indicate a chronic issue that requires addressing, such as inadequate lubrication or misalignment.

It’s important to conduct regular inspections, monitor performance, and address any signs of wear or damage promptly. Replacing worn or damaged ball bearings in a timely manner can prevent further damage to machinery, reduce downtime, and ensure safe and efficient operation.

ball bearing

How do Temperature and Environmental Conditions Affect the Performance of Ball Bearings?

Lubrication:

Material Properties:

Clearance Changes:

Corrosion and Contamination:

Thermal Stress:

Noise and Vibration:

Lubricant Degradation:

Seal Effectiveness:

Choosing Appropriate Bearings:

ball bearing

How do Ball Bearings Differ from Other Types of Bearings like Roller Bearings?

Ball bearings and roller bearings are two common types of rolling-element bearings, each with distinct designs and characteristics. Here’s a comparison of ball bearings and roller bearings:

Design:

Ball Bearings: Ball bearings use spherical balls to separate and reduce friction between the bearing’s inner and outer rings. The balls enable rolling motion and smooth contact, minimizing friction.

Roller Bearings: Roller bearings, as the name suggests, use cylindrical or tapered rollers instead of balls. These rollers have larger contact areas, distributing loads over a broader surface.

Friction and Efficiency:

Ball Bearings: Due to the point contact between the balls and the rings, ball bearings have lower friction and are more efficient at high speeds.

Roller Bearings: Roller bearings have a larger contact area, resulting in slightly higher friction compared to ball bearings. They are more suitable for heavy-load applications where efficiency is prioritized over high speeds.

Load Capacity:

Ball Bearings: Ball bearings excel at handling light to moderate loads in both radial and axial directions. They are commonly used in applications where smooth rotation and low friction are important.

Roller Bearings: Roller bearings have a higher load-carrying capacity than ball bearings. They can support heavier radial and axial loads and are preferred for applications with significant loads or impact forces.

Variability:

Ball Bearings: Ball bearings come in various designs, including deep groove, angular contact, and thrust ball bearings, each suitable for different applications.

Roller Bearings: Roller bearings have diverse types, including cylindrical, spherical, tapered, and needle roller bearings, each optimized for specific load and motion requirements.

Speed Capability:

Ball Bearings: The reduced friction in ball bearings makes them suitable for high-speed applications, such as electric motors and precision machinery.

Roller Bearings: Roller bearings can handle higher loads but are generally better suited for moderate to low speeds due to slightly higher friction.

Applications:

Ball Bearings: Ball bearings are used in applications where smooth motion, low friction, and moderate loads are essential, such as electric fans, bicycles, and some automotive components.

Roller Bearings: Roller bearings find applications in heavy machinery, construction equipment, automotive transmissions, and conveyor systems, where heavier loads and durability are crucial.

In summary, ball bearings and roller bearings differ in their design, friction characteristics, load capacities, speed capabilities, and applications. The choice between them depends on the specific requirements of the machinery and the type of loads and forces involved.

China OEM Gcr15 Ceiling Fan Ball Bearing 6203 for Auto Parts bearing driver kit
editor by CX 2024-04-16

China wholesaler OEM&Alt Quality Forklift Spare Parts CZPT 9512000175 Ball Joint Bearing (Electric Diesel) bearing example

Product Description

Main Products

Conpany Introduction

TOOMOTOO (ZheJiang )International trading Co.,Ltd is located in Shuangxin Street, Xihu (West Lake) Dis. District, ZheJiang , China. The transportation is very convenient, only 50 minutes drive from ZheJiang port, 10 minutes from the urban district, and 20 minutes from Xihu (West Lake) Dis. International Airport.
We provides spare parts, technical support and product development for forklifts of various brands. Focusing on forklift parts, we are committed to providing quality parts for forklifts worldwide.

What we do
TOOMOTOO provides
Parts and accessories for German brand forklifts, such as STILL, CZPT and JUNGHEINRICH.
Parts for American brand forklifts, such as HYSTER-YALE, CLARK and CROWN.
Parts and accessories applicable to Japanese brand forklifts, such as TOYOTA, NICHIYU, CZPT and TCM.
Parts for Chinese brand forklifts, such as HELI, HANGCHA, LONKING, CZPT and EP.

Our partners

Packaging & Shipping

Certifications

Exhibitions

Team of TOOMOTOO

FAQ

1.Do you provide free of sample?

Sample depends on the Model No., material and quantity. We provide free of sample with freight collect,
but some of samples need client to pay the cost.

2. How about your MOQ?
For standard parts .MOQ is 1 pcs, for customized ,MOQ depends the details.

3. Do you offer customization service?
Yes ,We can printing your brand (logo, artwork)on the products or laser engraving your brand. We can custom your packaging according to your design.AII copyright own by clients and we promised don’t disclose any info.

4. how about the delivery time?
Most orders will be shipped within 3-10 days after payment being received.

5. What are the advantages of your company?
One-stop solution for forklift parts, excellent manufacturer auditing and integration system, reasonable price and quality assurance.

6. Which payment method does your company support?
T/T and L/C are preferred. we will do our best to meet your needs, negotiable.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online Support
Warranty:	3 Months
Material:	Stainless Steel

Samples:	US$ 8/Piece 1 Piece(Min.Order) \| Order Sample

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

ball bearing

What are the Common Signs of Wear or Damage in Ball Bearings that Indicate the Need for Replacement?

Unusual Noise:

Vibration:

Excessive vibration in the machinery can be a sign of bearing wear. Vibrations can result from uneven wear, misalignment, or damaged components within the bearing.

Increased Temperature:

Irregular Movement:

If you notice irregular movement, jerking, or sticking during rotation, it could be a sign that the bearing is no longer operating smoothly. This may be due to damaged rolling elements or raceways.

Reduced Performance:

Visible Wear or Damage:

Leakage or Contamination:

If there is evidence of lubricant leakage, contamination, or the presence of foreign particles around the bearing, it suggests that the seal or shield may be compromised, leading to potential damage.

Looseness or Excessive Play:

If you can feel excessive play or looseness when manually moving the bearing, it could indicate worn-out components or misalignment.

Reduced Lifespan:

If the bearing’s expected lifespan is significantly shorter than usual, it may be due to inadequate lubrication, excessive loads, or improper installation, leading to accelerated wear.

Frequent Failures:

If the bearing is consistently failing despite regular maintenance and proper use, it could indicate a chronic issue that requires addressing, such as inadequate lubrication or misalignment.

ball bearing

How do Temperature and Environmental Conditions Affect the Performance of Ball Bearings?

Lubrication:

Material Properties:

Clearance Changes:

Corrosion and Contamination:

Thermal Stress:

Noise and Vibration:

Lubricant Degradation:

Seal Effectiveness:

Choosing Appropriate Bearings:

ball bearing

What are the Different Components that Make up a Typical Ball Bearing?

A typical ball bearing consists of several essential components that work together to reduce friction and support loads. Here are the main components that make up a ball bearing:

Outer Ring:

The outer ring is the stationary part of the bearing that provides support and houses the other components. It contains raceways (grooves) that guide the balls’ movement.

Inner Ring:

The inner ring is the rotating part of the bearing that attaches to the shaft. It also contains raceways that correspond to those on the outer ring, allowing the balls to roll smoothly.

Balls:

The spherical balls are the rolling elements that reduce friction between the inner and outer rings. Their smooth rolling motion enables efficient movement and load distribution.

Cage or Retainer:

The cage, also known as the retainer, maintains a consistent spacing between the balls. It prevents the balls from touching each other, reducing friction and preventing jamming.

Seals and Shields:

Many ball bearings include seals or shields to protect the internal components from contaminants and retain lubrication. Seals provide better protection against contaminants, while shields offer less resistance to rotation.

Lubricant:

Lubrication is essential to reduce friction, wear, and heat generation. Bearings are typically filled with lubricants that ensure smooth movement between the balls and raceways.

Flanges and Snap Rings:

In some designs, flanges or snap rings are added to help position and secure the bearing in its housing or on the shaft. Flanges prevent axial movement, while snap rings secure the bearing radially.

Raceways:

Raceways are the grooved tracks on the inner and outer rings where the balls roll. The shape and design of the raceways influence the bearing’s load-carrying capacity and performance.

Anti-Friction Shield:

In certain high-speed applications, a thin anti-friction shield can be placed between the inner and outer rings to minimize friction and heat generation.

These components work together to enable the smooth rolling motion, load support, and reduced friction that characterize ball bearings. The proper design and assembly of these components ensure the bearing’s optimal performance and longevity in various applications.

China wholesaler OEM&Alt Quality Forklift Spare Parts CZPT 9512000175 Ball Joint Bearing (Electric Diesel) bearing example
editor by CX 2024-04-02

China Custom Deep Groove Ball Bearing Motorcycle Parts with Great quality

Product Description

Deep groove ball bearings mainly bear radial load as well as take moderate axial load. With less coefficient of friction, high limiting speed, large size range and variations of structure, deep groove ball bearings are suitable for precision instruments, low noise motors, automobiles, motorcycles, air-conditioners, washers, cleaners and other common machineries as a widely used type of bearings in machinery industry.

Related Bearings

Part Number	ID	OD	Bore	Size
6000	10	26	8	10268
6001	12	28	8	12288
6002	15	32	9	15329
6003	17	35	10	173510
6004	20	42	12	204212
6005	25	47	12	254712
6200	10	30	9	10309
6201	12	32	10	123210
6202	15	35	11	153511
6203	17	40	12	174012
6204	20	47	14	204714
6205	25	52	15	255215
6300	10	35	11	103511
6301	12	37	12	123712
6302	15	42	13	154213
6303	17	47	14	174714
6304	20	52	15	205215
6305	25	62	17	256217

Company Profile

ZheZheJiang nmanli Technology Co., Ltd. is a professional supplier of a series of auto and motorcycle spare parts Located in China, ZheJiang Province.
Our products are enjoyed by both domestic and foreign clients, the high quality products and service have lead us won a set of clients throughout the world such as South America, Southeast Asia, Africa, Middle East and European countries. From the beginning to end, we uphold our enterprise spirit of “Quality first sincerity foremost”. We warmly welcome all foreign friends to be our business partners on the basis of mutual benefits, and wish to establish good relationship with each other in the near future.

Certifications

FAQ

1. How to get the best price from CZPT MOTOR?
The bulk order price can be negotiated.We will quote the lastest best price according to customer purchase list.

2. What is your terms of payment?
T/T 30% as deposit, and 70% balance against B/L copy. or by L/C.

3. What is your terms of delivery?
EXW, FOB, CFR, CIF.

4. What about the MOQ – minimum order quantity?
100 pcs – 1000 pcs, MOQ for different products are different, please check with us before order.

5. Do you accept OEM order?
Yes, we can customize products according to customers’ drawings or samples.

6. How about your delivery time?
Generally, it will take 15 to 30 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

7 How do you make our business long-term and good relationship?
We keep good quality and competitive price to ensure our customers benefit.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Bore Size:	5.992 – 6 mm
OEM:	Avaliable
Clearance:	C0
Color:	Customized
Structure:	Deep Groove
Precision Rating:	P0/ABEC-1

Samples:	US$ 2/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

ball bearing

Are there Specific Maintenance Practices to Ensure the Longevity of Ball Bearings?

Maintaining ball bearings is essential to ensure their longevity, reliable performance, and prevent premature failure. Proper maintenance practices can extend the lifespan of ball bearings and the equipment they are used in. Here are specific maintenance practices to consider:

Regular Lubrication:

Implement a regular lubrication schedule using the appropriate lubricant for the application. Lubrication reduces friction, prevents wear, and helps dissipate heat. Follow manufacturer guidelines for lubricant type, quantity, and frequency.

Clean Environment:

Keep the operating environment clean and free from contaminants. Dust, dirt, and debris can infiltrate bearings and cause damage. Use seals or shields to protect bearings from contaminants, especially in harsh environments.

Proper Installation:

Ensure correct installation of bearings using proper tools and techniques. Improper installation can lead to misalignment, uneven load distribution, and premature wear. Follow manufacturer recommendations for installation procedures.

Regular Inspections:

Perform routine visual inspections to check for signs of wear, damage, or contamination. Regular inspections can help identify issues early and prevent further damage. Pay attention to noise, vibration, and temperature changes.

Temperature Monitoring:

Monitor bearing temperatures during operation using infrared thermometers or sensors. Abnormal temperature increases can indicate inadequate lubrication, misalignment, or other problems.

Correct Handling:

Handle bearings with care to prevent damage during storage, transportation, and installation. Avoid dropping or subjecting them to impacts that can affect their internal components.

Bearing Removal and Replacement:

Follow proper procedures when removing and replacing bearings. Use appropriate tools and techniques to avoid damage to the bearing or the surrounding components.

Alignment Maintenance:

Maintain proper shaft and housing alignment to prevent excessive loads and wear on the bearing. Misalignment can lead to increased stress and premature failure.

Training and Education:

Provide training to operators and maintenance personnel on proper bearing maintenance and handling practices. Educated personnel are more likely to identify issues and perform maintenance correctly.

Documented Records:

Keep records of maintenance activities, inspections, lubrication schedules, and any issues encountered. This documentation helps track the bearing’s performance over time and informs future maintenance decisions.

By implementing these maintenance practices, you can ensure the longevity of ball bearings, minimize downtime, reduce operational costs, and maintain the reliability of the equipment they are a part of.

ball bearing

Are there any Industry Standards or Certifications that Ball Bearings should Meet?

Yes, there are several industry standards and certifications that ball bearings should meet to ensure their quality, performance, and reliability. These standards help manufacturers, engineers, and customers assess the suitability of bearings for specific applications. Some of the key standards and certifications for ball bearings include:

ISO Standards:

The International Organization for Standardization (ISO) has developed a series of standards related to ball bearings. ISO 15 defines dimensions, boundary dimensions, and tolerances for radial bearings. ISO 281 specifies dynamic load ratings and calculation methods for bearings’ life calculations.

ABEC (Annular Bearing Engineering Committee) Ratings:

ABEC ratings are commonly used in North America to indicate the precision and performance of ball bearings. Ratings range from ABEC 1 (lowest precision) to ABEC 9 (highest precision). However, it’s important to note that ABEC ratings focus primarily on dimensional tolerances and do not encompass all aspects of bearing quality.

DIN Standards:

The German Institute for Standardization (Deutsches Institut für Normung, DIN) has published various standards related to ball bearings. DIN 625 covers dimensions for deep groove ball bearings, while DIN 616 provides guidelines for precision angular contact ball bearings.

JIS (Japanese Industrial Standards):

JIS standards are used in Japan and internationally to define the characteristics and dimensions of various products, including ball bearings. JIS B 1512 outlines the classification and dimensions of rolling bearings.

ASTM (American Society for Testing and Materials) Standards:

ASTM has standards that cover various aspects of bearing testing, performance, and materials. ASTM F2215, for instance, specifies the requirements for ball bearings used in surgical implants.

CE Marking:

CE marking indicates that a product complies with European Union health, safety, and environmental requirements. It may be required for bearings used in machinery intended to be sold within the EU market.

Industry-Specific Standards:

Various industries, such as aerospace, automotive, medical, and nuclear, have specific standards or certifications that bearings must meet to ensure safety, reliability, and compliance with industry-specific requirements.

Quality Management Systems:

Manufacturers that adhere to quality management systems, such as ISO 9001, demonstrate their commitment to consistent product quality and customer satisfaction. Certification to these systems indicates that the manufacturing process follows established protocols and best practices.

When selecting ball bearings, it’s important to consider the relevant standards and certifications that align with the application’s requirements. This ensures that the bearings meet recognized quality and performance criteria, ultimately contributing to reliable and efficient operation.

ball bearing

What are the Different Components that Make up a Typical Ball Bearing?

A typical ball bearing consists of several essential components that work together to reduce friction and support loads. Here are the main components that make up a ball bearing:

Outer Ring:

The outer ring is the stationary part of the bearing that provides support and houses the other components. It contains raceways (grooves) that guide the balls’ movement.

Inner Ring:

The inner ring is the rotating part of the bearing that attaches to the shaft. It also contains raceways that correspond to those on the outer ring, allowing the balls to roll smoothly.

Balls:

The spherical balls are the rolling elements that reduce friction between the inner and outer rings. Their smooth rolling motion enables efficient movement and load distribution.

Cage or Retainer:

The cage, also known as the retainer, maintains a consistent spacing between the balls. It prevents the balls from touching each other, reducing friction and preventing jamming.

Seals and Shields:

Lubricant:

Lubrication is essential to reduce friction, wear, and heat generation. Bearings are typically filled with lubricants that ensure smooth movement between the balls and raceways.

Flanges and Snap Rings:

In some designs, flanges or snap rings are added to help position and secure the bearing in its housing or on the shaft. Flanges prevent axial movement, while snap rings secure the bearing radially.

Raceways:

Raceways are the grooved tracks on the inner and outer rings where the balls roll. The shape and design of the raceways influence the bearing’s load-carrying capacity and performance.

Anti-Friction Shield:

In certain high-speed applications, a thin anti-friction shield can be placed between the inner and outer rings to minimize friction and heat generation.

China Custom Deep Groove Ball Bearing Motorcycle Parts with Great quality
editor by CX 2024-03-29

China high quality Automobile Roller Deep Groove Ball Rolling Bearings 6017-2RS 6018-2RS 6019-2RS 6020-2RS Engine Deep Groove Ball Bearings Industrial Machinery Parts Bearing bearing block

Product Description

Introduction:

Introducing Our Zero-Class Deep Groove Ball Bearings for Your Needs!

Looking to enhance the performance of your industrial machinery? Your search ends here! Our Zero-Class Deep Groove Ball Bearings are engineered to offer a myriad of advantages, making them the perfect choice for your requirements.

1. Exceptional Precision: Our bearings are crafted with meticulous precision, ensuring minimal friction and optimal performance, thus enhancing the efficiency of your machinery.

2. High Load Capacity: Designed to withstand heavy axial and radial loads, our bearings guarantee reliable operation even in the most demanding applications.

3. Low Maintenance: Say goodbye to frequent downtime and maintenance costs. Our Zero-Class Deep Groove Ball Bearings are built to last, reducing the need for replacements.

4. Versatile Applications: Whether you operate in automotive, manufacturing, or any other industry, these bearings are versatile enough to meet a wide range of app

Parameter:

Product Name	Ball bearing Xihu (West Lake) Dis.r bearing Piliow bilock bearing Needle roller bearing Thrust ball bearing
Brand Name	KSA
Material	Gcr15
Precision Grade	P0,P6,P5
Certification	ISO 9001
Packeage	Box /Carton/Wooden Box/Plastic Tube or Per buyers requirement
MOQ	Depending On Moedl
Serice	OEM

Sample	Available
Payment	TT or L/C or Western Union
Port	HangZhou

Elaborate In Detail

1.Open type without seal

No seal can directly see the bare steel ball, suitable for sealing environment, such as gear box, oil more environment.
Performance: Good idling effect, ultra-high speed

2.Rubber seal

The sealing material is skeleton rubber combination, which can effectively prevent the bearing external (liquid) foreign matter and impurities from intruding into the bearing internal damage and damage the bearing
Advantages: dustproof, anti-liquid foreign matter, low noise, suitable for harsh environment

3.Metal seal
The sealing material is made of stainless steel metal, which can effectively prevent the bearing external (wind sand) foreign matter and debris from invading the bearing external with internal damage and damage to the bearing
Advantages: Low friction, fast heat dissipation

Model	d mm	D mm	H mm	W kg	Model	d mm	D mm	H mm	W kg
6000	10	26	8	0.019	6200	10	30	9	0.032
6001	12	38	8	0.571	6201	12	32	10	0.036
6002	15	32	9	0.03	6202	15	35	11	0.044
6003	17	35	10	0.04	6203	17	40	12	0.065
6004	20	42	12	0.069	6204	20	47	14	0.11
6005	25	47	12	0.08	6205	25	52	15	0.13
6006	30	55	13	0.116	6206	30	62	16	0.21
6007	35	62	14	0.155	6207	35	72	17	0.288
6008	40	68	15	0.185	6208	40	80	18	0.368
6009	45	75	16	0.231	6209	45	85	19	0.416
6571	50	80	16	0.25	6210	50	90	20	0.463
6011	55	90	18	0.362	6211	55	100	21	0.603
6012	60	95	18	0.385	6212	60	110	22	0.789
6013	65	100	18	0.408	6213	65	120	23	0.99
6014	70	110	20	0.62	6214	70	125	24	1.084
6015	75	115	20	0.63	6215	75	130	25	1.171
6016	80	125	22	0.86	6216	80	140	26	1.448
6017	85	130	22	0.94	6217	85	150	28	1.803
6018	90	140	24	1.38	6218	90	160	30	2.71
6019	95	145	24	1.5	6219	95	170	32	2.62
6571	100	150	24	1.63	6220	100	180	34	3.19

Product Analysis

Product Description

Noise Accuracy

Bearing Noise Precision Tolerance

Bearing noise Z1.Z2.Z3.Z4 The Z1 decibel Accuracy is divided into P0<P6<P5<P4

value is 33-38 decibels The Z2 decibel P0(ABCE-1) =+0-0.007MM

value is 28-32 decibels The Z3 decibel P6 (ABCE-3) =+0-0.006MM

value is 22-25 decibels The Z4 decibel P5 (ABCE-5) =+0-0.0005MM

value is 15-21 decibels Vibration and noise response life of bearings P4 (ABEC-7) =+0-0.004mm

Level P0 products are used in most scenarios
P5/P6 application precision level

Product Display

Company Profile

ZheJiang Kangshi Precision Bearing Manufacturing Co., Ltd., located in Yandian Town Industrial Park, HangZhou City, ZheJiang Province, mainly produces zero deep groove ball bearings, 2 types of cylindrical roller bearings, 3 types of aligning roller bearings, 6 types of angular contact ball bearings, 7 types of tapered roller bearings, 8 types of thrust ball bearings, thrust bearings, 9 types of thrust aligning roller bearings, outer spherical bearings, auto parts, Motorcycle parts and other rolling bearings.
Our factory has strong professional technology, good production equipment and perfect testing means, can fully meet the various types, specifications, high precision and special use requirements of bearing products customized processing, the production process of the product according to the strict national standards of enterprise internal control standards for the implementation of full inspection and multi-project comprehensive inspection of factory products, Can ensure the quality of each set of factory bearing products to meet national standards.
Kangshi bearing has always implemented national standards, market prices, and implemented the “three guarantees” principle for customers: To ensure high-quality quality, preferential prices, superior after-sales service! Welcome customers at home and abroad to consult and negotiate business, the company will continue to win the trust of more customers with good product quality and reputation

Our Advantage:

1. Our products: with high quality, long life, high speed, low noise, low friction quality products

2. We have: sufficient storage space, sufficient inventory, high production efficiency, we provide customers with the most favorable prices

3. Chinese bearing: in China’s production line, products are exported to all over the world, product specifications are complete, certificates are complete, professional R & D team

4. After-sales service and technical guidance: The company provides after-sales service and technical guidance according to customer requirements and needs

Scope of application

The products are suitable for: transmission, instrumentation, motor, household appliances, internal combustion engine, traffic vehicles, agricultural machinery, construction machinery, construction machinery roller skates, yo-yo ball, etc

FAQ

Q: What is the MOQ?
A: It depends on the bearing type. You can send inquiry or send e-mail for more information.
Q: How about the package?
A: Industrial packing in general condition (Plastic drums/boxes/industrial packaging + cartons + pallets). Accept design package when OEM.
Q: How long is the delivery time?
A: It will take about 10 to 40 days, depends on the model and quantity.
Q:What are the advantages of your company’s services compared to other companies?
A: Factory direct supply, price advantage, 24 hours online timely reply, Provide customers with customs clearance
and quality of various documents, 100% after-sales service
Q:OEM POLICY
A:We can printing your brand (logo,artwork)on the bearings or laser engraving your brand on the bearings.
We can custom your packaging according to your design All copyright own by clients and we promised don’t
  disclose any info.
Q:How to contact us quickly?
A:Please send us an inquiry or message and leave your other contact information, such as phone number,
     account or account, we will contact you as soon as possible and provide the detailed information you need.
   Please feel free to contact us, if you have any other question

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Quality:	High Quality
Inventory:	Abundant
Major Market:	Global

Samples:	US$ 2/Set 1 Set(Min.Order) \| Order Sample

Customization:	Available \| Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

ball bearing

Can you Provide Examples of Industries where Ball Bearings are Crucial Components?

Automotive Industry:

Aerospace Industry:

Industrial Machinery:

Medical Equipment:

Robotics and Automation:

Ball bearings are key components in robotic arms, automation systems, and manufacturing machinery. They enable precise movement, high-speed operation, and reliable performance in automated processes.

Renewable Energy:

Marine and Shipbuilding:

Heavy Equipment and Construction:

In construction machinery like excavators, bulldozers, and cranes, ball bearings support the movement of heavy loads and enable efficient operation in demanding environments.

Electronics and Consumer Appliances:

Consumer electronics like electric motors, computer hard drives, and household appliances rely on ball bearings for smooth motion and reliable operation.

Oil and Gas Industry:

In oil and gas exploration and extraction equipment, ball bearings are used in drilling rigs, pumps, and processing machinery. They handle the high loads and harsh conditions of this industry.

ball bearing

What Role do Seals and Shields Play in Protecting Ball Bearings from Dirt and Debris?

Seals and shields are critical components of ball bearings that play a crucial role in protecting them from dirt, debris, moisture, and contaminants in various applications. These protective features help maintain the integrity of the bearing’s internal components and ensure reliable operation. Here’s how seals and shields contribute to bearing protection:

Contaminant Exclusion:

Seals and shields create a physical barrier between the external environment and the bearing’s interior. They prevent dust, dirt, water, and other contaminants from entering the bearing and coming into contact with the rolling elements and raceways.

Lubrication Retention:

Seals and shields help retain lubrication within the bearing. They prevent the lubricant from escaping and contaminants from entering, ensuring that the bearing remains properly lubricated for smooth operation and reduced friction.

Corrosion Prevention:

Seals and shields protect bearing components from exposure to moisture and corrosive substances. By preventing moisture ingress, they help extend the bearing’s lifespan by minimizing the risk of corrosion-related damage.

Extended Bearing Life:

Seals and shields contribute to the overall longevity of the bearing by reducing wear and damage caused by contaminants. They help maintain a clean internal environment, which promotes proper rolling contact and minimizes the risk of premature failure.

Enhanced Performance in Harsh Environments:

In applications exposed to harsh conditions, such as outdoor machinery or industrial settings, seals and shields are vital. They protect bearings from abrasive particles, chemicals, and extreme temperatures, ensuring reliable performance despite challenging conditions.

Noise and Vibration Reduction:

Seals and shields can help reduce noise and vibration generated by the bearing. They provide additional damping and stability, contributing to smoother operation and enhanced user comfort in noise-sensitive applications.

Customized Protection:

Manufacturers offer a variety of seal and shield designs to suit different application requirements. Some seals provide higher levels of protection against contamination, while others are designed for high-speed or high-temperature environments.

Trade-Offs:

While seals and shields offer significant benefits, they can also introduce some friction due to contact with the bearing’s inner or outer ring. Engineers must balance the level of protection with the desired operating characteristics, considering factors like friction, speed, and environmental conditions.

Overall, seals and shields play a vital role in maintaining the integrity and performance of ball bearings. By effectively preventing contaminants from entering and preserving lubrication, they ensure the smooth and reliable operation of machinery and equipment in a wide range of applications.

ball bearing

What are the Different Components that Make up a Typical Ball Bearing?

A typical ball bearing consists of several essential components that work together to reduce friction and support loads. Here are the main components that make up a ball bearing:

Outer Ring:

The outer ring is the stationary part of the bearing that provides support and houses the other components. It contains raceways (grooves) that guide the balls’ movement.

Inner Ring:

The inner ring is the rotating part of the bearing that attaches to the shaft. It also contains raceways that correspond to those on the outer ring, allowing the balls to roll smoothly.

Balls:

The spherical balls are the rolling elements that reduce friction between the inner and outer rings. Their smooth rolling motion enables efficient movement and load distribution.

Cage or Retainer:

The cage, also known as the retainer, maintains a consistent spacing between the balls. It prevents the balls from touching each other, reducing friction and preventing jamming.

Seals and Shields:

Lubricant:

Lubrication is essential to reduce friction, wear, and heat generation. Bearings are typically filled with lubricants that ensure smooth movement between the balls and raceways.

Flanges and Snap Rings:

In some designs, flanges or snap rings are added to help position and secure the bearing in its housing or on the shaft. Flanges prevent axial movement, while snap rings secure the bearing radially.

Raceways:

Raceways are the grooved tracks on the inner and outer rings where the balls roll. The shape and design of the raceways influence the bearing’s load-carrying capacity and performance.

Anti-Friction Shield:

In certain high-speed applications, a thin anti-friction shield can be placed between the inner and outer rings to minimize friction and heat generation.

China high quality Automobile Roller Deep Groove Ball Rolling Bearings 6017-2RS 6018-2RS 6019-2RS 6020-2RS Engine Deep Groove Ball Bearings Industrial Machinery Parts Bearing bearing block
editor by CX 2024-03-27

China manufacturer Auto Parts High-Quality OEM Customization Deep Groove Ball Bearing supplier

Product Description

Deep groove ball bearings are the most representative of rolling bearings, with simple structure, They are easy to use and versatile .
Such bearings are non-separabal bearings,the inner and outer rings are rolled into a ditch arc type. They can bear radial load and axial load,with low coefficient of friction,high limiting speed .They are suitable for high-spped,low noise ,low vibration cccasions.
Deep groove balll bearings are widely used in auto-mobiles,machinetools,motors,instrumentation,construction machinery,railway vehicles,agricultural machinery and various equipment in machinery industry.

Product Parameters

Eaaring No	Di d	mension D	(mm) B	Mass(kg)	Bearing No	DI d	mension D	(mm) B	Mass(kg)
604	4	12	4.0		6212	60	110	22	0.780
606	6	17	17.0		6213	65	120	23	0.990
608		22	7.0	0.0080	8214	70	125	24	1.050
623	3	10	4.0	0.571	6215	75	130	25	1.200
625	5	16	5.0	0.0050	6216	80	140	26	1.400
634	4	16	5.0	0.0050	6217	85	150	28	1.800
635	5	19	6.0	0.0080	6218	90	160	30	2.150
680	9	22	7.0		6219	95	170	32	2.600
618/3	3	7	2.0	0.0003	6220	100	100	34	3.150
618/4	4	9	2.5	0.0006	6221	105	190	36	00
618/5	5	11	3.0	0.0120	6222	10	200	38	4.350
6000	10	26	8.0	0.0190	6300	10	35	11	0.053
6001	12	20	8.0	0.5710	6301	12	37	12	0.060
6002	15	32	9.0	0.0300	6302	15	42	13	0.082
6003	17	35	10.0	0.0390	6303	17	47	14	0.120
6004	20	42	120	0.0690	6304	20	52	15	0.140
6005	25	47	12.0	0.0800	6205	25	62	17	0.230
6006	30	55	13.0	0.1200	6306	30	72	19	0.3680
6007	35	62	14.0	0.1600	6207	35	80	21	0.460
6008	40	68	15.0	0.1900	6309	40	90	23	0.630
6009	45	75	16.0	0.2500	6309	45	100	25	0.830
6571	50	80	16.0	0.2600	6310	50	110	27	1.050
6011	55	90	18.0	0.3000	6311	55	120	29	1.350
6012	0	96	18.0	0.4200	6312	60	130	31	1.700
6013	65	100	18.0	0.4400	6313	65	140	33	2.100
6014	70	110	20.0	0.6000	6314	70	150	35	2.500
6015	75	115	20.0	0.6400	6315	75	160	37	3.000
6016	80	120	22.0	0.8500	6316	80	170	39	3.600
6017	85	130	22.0	0.8900	6217	85	180	41	4.260
6018	90	140	24.0	1.1500	6318	90	190	43	4.900
6019	95	145	24.0	1.2000	6319	95	200	45	5.650
6571	100	150	24.0	1.2500	6320	100	215	47	7.000
6571	105	160	26.0	16,000	6401	12	42	13	0.048
6571	110	170	28.0	1.9500	6402	15	52	15	0.137
6200	10	30	9.0	0.0320	6403	17	62	17	0.271
850	12	32	10.0	0.571	6404	20	72	19	0.408
6202	15	35	11.0	0.0450	6405	25	80	21	0.528
6203	17	40	12.0	0.0650	6406	30	90	23	0.720
6204	20	47	14.0	0.1100	6407	35	100	25	0.936
6205	25	52	15.0	0.1300	6408	40	110	27	1.200
6206	30	62	16.0	0.2000	6409	45	120	28	1.550
6207	35	72	17.0	0.2900	6410	50	130	31	1.910
6208	40	80	18.0	0.3700	6411	55	140	33	2.320
6209	45	85	19.0	0.4100	6412	60	150	35	2.790
6210	0	90	20.0	0.4600	6413	65	160	37	3.360
6211	55	100	21.0	0.6100	6414	70	180	42	5.000
“Aval lable typas:apan,Z.ZZ,RS;2RS,N,ZN

OUR PRODUCTS

SCOPE OF APPLICATION

Packaging & Shipping

FAQ

Q1,What kind of factory are we?

A:We are based in ZheJiang , China, selling to Southeast Asia,North America, Africa, Oceania, South America,
South Asia, and Europe.

Q2,what can you buy from us?

A:Electric Motorcycle, Electric Tricycle, Electric Balance, Electric Scooter, and Their Parts.

Q3,How can we guarantee quality?

A:We always have a pre-production sample before mass production. We always conduct a final inspection before shipment. We have
departments responsible for after-sales service.

Q4,What’s our MOQ?

A:We have no minimum order quantity (MOQ) for new customers We accept small orders to support your trial order, new designs, and
marketing development.

Q5,Why did you choose us?

A:We have been engaged early in the development, production, sales, and service of electric vehicles in China. We welcome
customers, business associations, and friends from all over the world to contact us for cooperation and mutual benefit.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material Option 2:	Stainless Steel
Lubrication:	Grease or Oil
Aligning:	Non-Aligning Bearing
Separated:	Unseparated
Model No.:	608zz 6203 6202 2RS 6207 6005 6201 6206 6309
Load Direction:	Radial Bearing

ball bearing

Are there Specific Maintenance Practices to Ensure the Longevity of Ball Bearings?

Regular Lubrication:

Clean Environment:

Proper Installation:

Regular Inspections:

Temperature Monitoring:

Monitor bearing temperatures during operation using infrared thermometers or sensors. Abnormal temperature increases can indicate inadequate lubrication, misalignment, or other problems.

Correct Handling:

Handle bearings with care to prevent damage during storage, transportation, and installation. Avoid dropping or subjecting them to impacts that can affect their internal components.

Bearing Removal and Replacement:

Follow proper procedures when removing and replacing bearings. Use appropriate tools and techniques to avoid damage to the bearing or the surrounding components.

Alignment Maintenance:

Maintain proper shaft and housing alignment to prevent excessive loads and wear on the bearing. Misalignment can lead to increased stress and premature failure.

Training and Education:

Provide training to operators and maintenance personnel on proper bearing maintenance and handling practices. Educated personnel are more likely to identify issues and perform maintenance correctly.

Documented Records:

ball bearing

What Precautions should be taken to Prevent Contamination of Ball Bearings in Industrial Settings?

Preventing contamination of ball bearings is essential to ensure their proper function, longevity, and overall performance in industrial settings. Contaminants such as dust, dirt, debris, and particles can significantly impact bearing operation. Here are important precautions to take to prevent contamination of ball bearings:

Effective Sealing:

Choose ball bearings with appropriate seals or shields to prevent the ingress of contaminants. Seals provide a physical barrier against dust, moisture, and particles, ensuring the bearing’s interior remains clean.

Clean Environment:

Maintain a clean working environment around the machinery and equipment. Regularly clean the surrounding areas to prevent the accumulation of dirt and debris that could enter the bearings.

Proper Handling:

Handle bearings with clean hands and use gloves if necessary. Avoid touching the bearing surfaces with bare hands, as natural skin oils can transfer contaminants onto the bearing.

Clean Tools and Equipment:

Use clean tools and equipment during installation and maintenance to prevent introducing contaminants. Ensure that tools are properly cleaned before coming into contact with the bearing components.

Contamination-Controlled Workstations:

Establish contamination-controlled workstations for bearing handling, installation, and maintenance. These areas should have proper ventilation, filtered air, and minimal exposure to external contaminants.

Proper Lubrication:

Use the correct lubricant in appropriate quantities. Lubricants help create a barrier against contaminants and reduce friction. Regularly inspect and replenish lubrication to maintain its effectiveness.

Regular Inspections:

Implement a routine inspection schedule to monitor the condition of the bearings. Look for signs of contamination, wear, and damage. Address any issues promptly to prevent further damage.

Training and Education:

Train personnel on proper handling, installation, and maintenance practices to minimize the risk of contamination. Educated employees are more likely to take precautions and prevent accidental contamination.

Environmental Controls:

In sensitive environments, such as clean rooms or medical facilities, implement strict environmental controls to minimize the presence of contaminants that could affect bearing performance.

Regular Cleaning and Maintenance:

Perform regular cleaning and maintenance of machinery and equipment to prevent the buildup of contaminants. Keep bearings protected during maintenance to prevent debris from entering during the process.

Selection of Suitable Bearings:

Choose bearings that are specifically designed for the application’s environmental conditions. Some bearings have advanced sealing options or specialized coatings that enhance contamination resistance.

By implementing these precautions, industries can significantly reduce the risk of contamination in ball bearings, ensuring smooth operation, extended bearing life, and enhanced equipment reliability.

ball bearing

Can you Explain the Various Types of Ball Bearings and their Specific Use Cases?

Ball bearings come in various types, each designed to meet specific application requirements. Here’s an overview of the different types of ball bearings and their specific use cases:

Deep Groove Ball Bearings:

Deep groove ball bearings are the most common and versatile type. They have a deep raceway that allows them to handle both radial and axial loads. They are used in a wide range of applications, including electric motors, household appliances, automotive components, and industrial machinery.

Angular Contact Ball Bearings:

Angular contact ball bearings have a contact angle that enables them to handle both radial and axial loads at specific angles. They are suitable for applications where combined loads or thrust loads need to be supported, such as in machine tool spindles, pumps, and agricultural equipment.

Self-Aligning Ball Bearings:

Self-aligning ball bearings have two rows of balls and are designed to accommodate misalignment between the shaft and the housing. They are used in applications where shaft deflection or misalignment is common, such as conveyor systems, textile machinery, and paper mills.

Thrust Ball Bearings:

Thrust ball bearings are designed to support axial loads in one direction. They are commonly used in applications where axial loads need to be supported, such as in automotive transmissions, steering systems, and crane hooks.

Single-Row vs. Double-Row Bearings:

Single-row ball bearings have a single set of balls and are suitable for moderate load and speed applications. Double-row ball bearings have two sets of balls and offer higher load-carrying capacity. Double-row designs are used in applications such as machine tool spindles and printing presses.

Miniature and Instrument Ball Bearings:

Miniature ball bearings are smaller in size and are used in applications with limited space and lower load requirements. They are commonly used in small electric motors, medical devices, and precision instruments.

Max-Type and Conrad Bearings:

Max-type ball bearings have a larger number of balls to increase load-carrying capacity. Conrad bearings have fewer balls and are used in applications with moderate loads and speeds.

High-Precision Ball Bearings:

High-precision ball bearings are designed for applications where accuracy and precision are critical, such as machine tool spindles, aerospace components, and optical instruments.

High-Speed Ball Bearings:

High-speed ball bearings are engineered to minimize friction and accommodate rapid rotation. They are used in applications such as dental handpieces, turbochargers, and centrifuges.

In summary, the various types of ball bearings are tailored to different application requirements, including load type, direction, speed, and environmental conditions. Selecting the appropriate type of ball bearing ensures optimal performance and longevity in specific applications.

China manufacturer Auto Parts High-Quality OEM Customization Deep Groove Ball Bearing supplier
editor by CX 2024-03-25

China Custom Canton Fair Help Price / Chinese Manufacturer Ball Bearings / Auto Bearings / Rolling Bearing for Auto Parts with Great quality

Product Description

PRODUCT PICTURES

Can you Provide Examples of Industries where Ball Bearings are Crucial Components?

Automotive Industry:

Aerospace Industry:

Industrial Machinery:

Medical Equipment:

Robotics and Automation:

Ball bearings are key components in robotic arms, automation systems, and manufacturing machinery. They enable precise movement, high-speed operation, and reliable performance in automated processes.

Renewable Energy:

Marine and Shipbuilding:

Heavy Equipment and Construction:

In construction machinery like excavators, bulldozers, and cranes, ball bearings support the movement of heavy loads and enable efficient operation in demanding environments.

Electronics and Consumer Appliances:

Consumer electronics like electric motors, computer hard drives, and household appliances rely on ball bearings for smooth motion and reliable operation.

Oil and Gas Industry:

In oil and gas exploration and extraction equipment, ball bearings are used in drilling rigs, pumps, and processing machinery. They handle the high loads and harsh conditions of this industry.

ball bearing

Are there any Industry Standards or Certifications that Ball Bearings should Meet?

ISO Standards:

ABEC (Annular Bearing Engineering Committee) Ratings:

DIN Standards:

JIS (Japanese Industrial Standards):

ASTM (American Society for Testing and Materials) Standards:

ASTM has standards that cover various aspects of bearing testing, performance, and materials. ASTM F2215, for instance, specifies the requirements for ball bearings used in surgical implants.

CE Marking:

Industry-Specific Standards:

Quality Management Systems:

ball bearing

Can you Explain the Various Types of Ball Bearings and their Specific Use Cases?

Ball bearings come in various types, each designed to meet specific application requirements. Here’s an overview of the different types of ball bearings and their specific use cases:

Deep Groove Ball Bearings:

Angular Contact Ball Bearings:

Self-Aligning Ball Bearings:

Thrust Ball Bearings:

Single-Row vs. Double-Row Bearings:

Miniature and Instrument Ball Bearings:

Max-Type and Conrad Bearings:

Max-type ball bearings have a larger number of balls to increase load-carrying capacity. Conrad bearings have fewer balls and are used in applications with moderate loads and speeds.

High-Precision Ball Bearings:

High-precision ball bearings are designed for applications where accuracy and precision are critical, such as machine tool spindles, aerospace components, and optical instruments.

High-Speed Ball Bearings:

High-speed ball bearings are engineered to minimize friction and accommodate rapid rotation. They are used in applications such as dental handpieces, turbochargers, and centrifuges.

China Custom Canton Fair Help Price / Chinese Manufacturer Ball Bearings / Auto Bearings / Rolling Bearing for Auto Parts with Great quality
editor by CX 2024-03-24

China Good quality Spare Parts 750113157 Ball Bearing 860124359 for CZPT with Hot selling

Product Description

SPARE PARTS 750113157 ball bearing 860124359 FOR XCMG

Other products of XCMG

About HongJun

Who we are?

The most professional truck and spare parts manufacturer in China;

The most comprehensive truck and spare parts solution provider in China;

The most worry-free and most satisfactory and reputable supplier for you in China.

We can never let you down if you choose us.

Our Services:

1.All of our products are with professional service.

2. We can offer free consultation of service information .

3.The dominance we kept all along is to provide the customers with genuine spare parts.

4. Professional sales and after sale service team, timely and efficiently to solve your problem.

5.We are willing to privide the High Quality,ReasonablePrice and Perfect Service.

FAQ

( 1)What about your packing?
We will use the original packaging of the goods,but of course ,we can also customize it.

(2)What about your terms of payment?
L/C, T/T, D/P, Western Union, Paypal Money Gram, Others

(3)What is your terms of delivery?
FOB,CFR,CIF

(4)How about your delivery time?
It depends on the items and quantities of your order. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Yes
Warranty:	Yes
Type:	Ball Bearing
Application:	Loaer Engine
Certification:	CE, ISO9001: 2000
Condition:	New

Customization:	Available \| Customized Request

ball bearing

How does Preload Affect the Performance and Efficiency of Ball Bearings?

Reduction of Internal Clearance:

Increased Stiffness:

Minimized Axial Play:

Enhanced Rigidity:

Reduction in Ball Slippage:

Improved Running Accuracy:

Optimized Performance at High Speeds:

Impact on Friction and Heat Generation:

Application-Specific Considerations:

ball bearing

What Role do Seals and Shields Play in Protecting Ball Bearings from Dirt and Debris?

Contaminant Exclusion:

Lubrication Retention:

Corrosion Prevention:

Extended Bearing Life:

Enhanced Performance in Harsh Environments:

Noise and Vibration Reduction:

Customized Protection:

Trade-Offs:

ball bearing

How does Lubrication Impact the Performance and Lifespan of Ball Bearings?

Lubrication plays a critical role in the performance and lifespan of ball bearings. Proper lubrication ensures smooth operation, reduces friction, minimizes wear, and prevents premature failure. Here’s how lubrication impacts ball bearings:

Friction Reduction:

Lubrication creates a thin film between the rolling elements (balls) and the raceways of the bearing. This film reduces friction by separating the surfaces and preventing direct metal-to-metal contact. Reduced friction results in lower energy consumption, heat generation, and wear.

Wear Prevention:

Lubricants create a protective barrier that prevents wear and damage to the bearing’s components. Without proper lubrication, the repeated rolling and sliding of the balls against the raceways would lead to accelerated wear, surface pitting, and eventual failure.

Heat Dissipation:

Lubricants help dissipate heat generated during operation. The rolling elements and raceways can generate heat due to friction. Adequate lubrication carries away this heat, preventing overheating and maintaining stable operating temperatures.

Corrosion Resistance:

Lubrication prevents moisture and contaminants from coming into direct contact with the bearing’s surfaces. This helps protect the bearing against corrosion, rust, and the formation of debris that can compromise its performance and longevity.

Noise Reduction:

Lubricated ball bearings operate quietly because the lubricant cushions and dampens vibrations caused by the rolling motion. This noise reduction is crucial in applications where noise levels need to be minimized.

Seal Protection:

Lubricants help maintain the effectiveness of seals or shields that protect the bearing from contaminants. They create a barrier that prevents particles from entering the bearing and causing damage.

Improved Efficiency:

Properly lubricated ball bearings operate with reduced friction, leading to improved overall efficiency. This is especially important in applications where energy efficiency is a priority.

Lifespan Extension:

Effective lubrication significantly extends the lifespan of ball bearings. Bearings that are properly lubricated experience less wear, reduced fatigue, and a lower likelihood of premature failure.

Selection of Lubricant:

Choosing the right lubricant is essential. Factors such as speed, temperature, load, and environmental conditions influence the choice of lubricant type and viscosity. Some common lubricant options include grease and oil-based lubricants.

Regular Maintenance:

Regular lubrication maintenance is crucial to ensure optimal bearing performance. Bearings should be inspected and relubricated according to manufacturer recommendations and based on the application’s operating conditions.

In summary, proper lubrication is essential for the optimal performance, longevity, and reliability of ball bearings. It reduces friction, prevents wear, dissipates heat, protects against corrosion, and contributes to smooth and efficient operation in various industrial and mechanical applications.

China Good quality Spare Parts 750113157 Ball Bearing 860124359 for CZPT with Hot selling
editor by CX 2024-03-23

If the model your Preferred is	Sufficient stock	Lead Time
Regular models	YES	Within 7 days
Regular models	NO	Within 30 days
Non-regular model	NO	About 50 days

Subject	Symbol	Description
Sealing & Sealing type	Z	Metal shield on 1 side.
	ZZ	Metal shields on both sides.
	RS	Rubber seal on 1 side.
	2RS	Rubber seals on both sides.
	ZNR	Shield on 1 side, snap ring groove in the outer ring, with snap ring on the opposite side of the shield
	2ZNR	Shield on both sides, snap ring groove in the outer ring, with snap ring
	ZNBR	Shield on 1 side, snap ring groove in the outer ring, with snap ring on the same side as the shield
Vibration Velocity	V	Normal vibration level. Is not indicated as a standard.
	V1	Lower vibration level than normal.
	V2	Lower vibration level than V1.
	V3	Lower vibration level than V2.
	V4	Lower vibration level than V3.
Tolerances	P0(ABEC1)	Bearings in standard tolerance
	P6(ABEC3)	Tighter tolerance than standard bearings
	P5(ABEC5)	Tolerance tighter than P6
	P4(ABEC7)	Tolerance tighter than P5
	P2(ABEC9)	Tolerance tighter than P4
Radial internal clearance	C1	Smaller clearance than C2
	C2	Smaller clearance than CN
	CN(C0)	Clearance than normal
	C3	Clearance larger than CN
	C4	Clearance larger than C3
	C5	Clearance larger than C4
Snap Ring Groove	N	Snap ring groove in the outer ring
	NR	Snap ring groove in the outer ring, with snap ring
	N1	One locating slot in 1 outer ring side face
	R	Flanged outer ring
Other technical modifications	NR	Groove with inserted snap ring in outer ring.
	N	Snap ring groove in the outer ring.
	SS	Stainless steel.

Cage Materials	J	Pressed steel cages
	M	Solid brass cage
	F	Solid cage made from steel or iron
	Y	Pressed brass cages.
	T	Laminated phenolic cages.
	TN	Polyamide cages
	TH	Glass-fiber reinforced phenolic resin cages.
	TV	Polyamide cage
Cage Designs	P	Window-type cage
	H	Claw-type cage
	A	Cage guided on the bearing outer ring
	B	Cage-guided on the bearing inner ring
	S	Cage with lubricating slots in the guiding surfaces
	D	Carbonitriding cage
	W	Welded cage
	R	Riveted Cage
Cage Types	N/A	Claw-type cage
		Ribbon cage
		Crown cage
		Sunflower cage
		Tapered cage

Material Option 2:	Stainless Steel
MOQ:	One Pallet
Seals Options:	Z / 2z, Rz / 2rz, RS / 2RS, Rsz / Rzz, Zn / Znr /

Designation	Boundary Dimension (mm)			Limiting Speed (rpm)		Load Rating (Kn)		Weight
Designation	Inner Diameter (d)	Outside Diameter (D)	Width (B)	Grease Lubrication	Oil Lubrication	Dynamic Load (cr)	Static Load (cor)	Weight (kg)
6201	12	32	10	19000	24000	6.82	3.05	0.037
6202	15	35	11	18000	22000	7.65	3.72	0.045
6203	17	40	12	16000	20000	9.58	4.78	0.065
6204	20	47	14	14000	18000	12.8	6.65	0.106
6205	25	52	15	13000	15000	14	7.85	0.128
6206	30	62	16	11000	13000	19.5	11.3	0.199
6207	35	72	17	9200	11000	25.7	15.4	0.288
6208	40	80	18	8000	10000	29.5	18	0.368
6209	45	85	19	7000	9000	31.5	20.5	0.416
6210	50	90	20	6700	8500	35	23.2	0.463
6211	55	100	21	6000	7500	43.2	29.2	0.603
6212	60	110	22	5600	7000	47.8	32.8	0.789
6213	65	120	23	5000	6300	57.2	40	0.99
6214	70	125	24	4800	6000	60.8	45	1.084
6215	75	130	25	4500	5600	66	49.5	1.171
6216	80	140	26	4300	5300	71.5	54.2	1.448
6217	85	150	28	4000	5000	83.2	63.8	1.803
6218	90	160	30	3800	4800	95.8	71.5	2.17
6219	95	170	32	3600	4500	110	82.8	2.62
6220	100	180	34	3400	4300	122	92.8	3.19
6221	105	190	36	3200	4000	133	105	3.78
6222	110	200	38	3000	3800	144	117	4.42
6224	120	215	40	2600	3400	155	131	5.3
6226	130	230	40	2400	3200	165	148	6.12
6228	140	250	42	2000	2800	179	167	7.77
6230	150	270	45	1900	2600	203	199	9.78
6232	160	290	48	1800	2400	215	218	12.22
6234	170	310	52	1700	2200	245	260	15.241
6236	180	320	52	1600	2000	262	285	15.518
6238	190	340	55	1500	1900	285	322	18.691
6240	200	360	58	1400	1800	288	332	22.577