{"id":520,"date":"2024-04-13T01:33:48","date_gmt":"2024-04-13T01:33:48","guid":{"rendered":"https:\/\/www.selfaligningballbearing.com\/?p=520"},"modified":"2024-04-13T01:33:48","modified_gmt":"2024-04-13T01:33:48","slug":"china-hot-selling-51130-low-noise-thrust-ball-bearing-for-heavy-lifting-hook-bearing-bearing-driver","status":"publish","type":"post","link":"https:\/\/www.selfaligningballbearing.com\/?p=520","title":{"rendered":"China Hot selling 51130 Low Noise Thrust Ball Bearing for Heavy Lifting Hook Bearing bearing driver"},"content":{"rendered":"
\n
\n

Product Description<\/h2>\n

\n

PRODUCT DESCRIPTION
\u00a0 <\/p>\n

\n

\n

Thrust ball bearings are produced as single<\/p>\n

direction or double direction thrust ball<\/p>\n

bearings. They are designed to<\/p>\n

accommodate axial loads only and must<\/p>\n

not be subjected to any radial load.
\u00a0 <\/p>\n

\n

<\/p>\n

\n

\n

Thrust ball bearings are separable,\u00a0the<\/p>\n

shaft washer, housing washer(s), ball and<\/p>\n

cage assembly(s) can be mounted<\/p>\n

separately. Shaft washers have a ground<\/p>\n

bore to enable an interference fit. The bore<\/p>\n

of the housing washer is turned and always<\/p>\n

larger than the shaft washer bore.
\u00a0 <\/p>\n

\n

\n

\n

\n

\n

\n

PRODUCT DETAILS\u00a0
\u00a0 <\/p>\n

\n

\n

Single\u00a0direction thrust ball\u00a0bearings<\/b>: <\/p>\n

consist of 2 washers with raceways and<\/p>\n

balls guided b a cage. Washers have flat<\/p>\n

seating surfaces, and that is why they must<\/p>\n

be supported so that all balls can be evenly<\/p>\n

loaded. Bearings carry the axial load only<\/p>\n

in 1 direction. They are not CZPT to carry<\/p>\n

radial forces.\u00a0
\u00a0 <\/p>\n

\n

\u00a0 <\/p>\n

\n

\n

Double\u00a0direction thrust ball bearings<\/b>: <\/p>\n

have 2 cages with balls between the<\/p>\n

central shaft washer and 2 houding<\/p>\n

washers with flat seating surfaces. The<\/p>\n

shaft washer has raceways on both sides<\/p>\n

and is fixed on the journal. Bearings are<\/p>\n

CZPT to carry only axial forces in both<\/p>\n

directions.
\u00a0 <\/p>\n

\n

PRODUCT PARAMETERS
\u00a0 <\/p>\n\n\n\n\n\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n\n<\/tr>\n<\/tbody>\n<\/table>\n

Application of thrust ball bearing:
\u00a0
1.Thrust\u00a0Ball\u00a0Bearings\u00a0should\u00a0use\u00a0close\u00a0to\u00a0the\u00a0radial\u00a0bearing,\u00a0
\u00a0 in\u00a0order\u00a0to\u00a0prevent\u00a0the\u00a0effect\u00a0of\u00a0shafts\u00a0deflection.
\u00a0
2.When\u00a0using\u00a0big\u00a0size\u00a0ball\u00a0bearings\u00a0on\u00a0a\u00a0horizontal\u00a0shaft,\u00a0preload\u00a0should\u00a0be\u00a0implemented\u00a0to
\u00a0prevent\u00a0the\u00a0clearance\u00a0between\u00a0housing\u00a0washer\u00a0and\u00a0balls.\u00a0
\u00a0
3.Under\u00a0the\u00a0inevitable\u00a0circumstances\u00a0of\u00a0shaft\u00a0deflection\u00a0and\u00a0misalignment,\u00a0
aligning\u00a0seat\u00a0washer\u00a0should\u00a0be\u00a0applied. <\/p>\n

COMPANY PROFILE
ZheJiang Dente International Trade Co.,Ltd\u00a0is a comprehensive enterprise with factory and trading company. we are focusing on import and export business based on our own bearing factory which is located in HangZhou City where is the largest bearing wholesale base in China.
Our company is specialized in developing various bearings which include deep groove ball bearings, tapered roller bearings, outer spherical bearings, self-aligning ball bearings, spherical roller bearings, cylindrical roller bearings, thrust ball bearings, non-standard bearings of automobiles. Simultaneously we also supply needle roller bearings, stainless steel bearings ,inch series bearings, non-standard bearings, the series of special bearings, imported bearings of global famous brand.
Our company mission is to supply high-quality bearings with competitive price for customers. And our company philosophy is based on excellent service, quick feedback, working sincerely, and team work. We hope to create a beautiful future together with customers. <\/p>\n

\n

\n

\n

\n

TESTING EQUIPMNET <\/p>\n

\n

\n

\n

\n

\u00a0 <\/p>\n

\n

\n

Package
\u00a0
A.tube package + outer carton + pallets
\u00a0
B.single box + outer carton + pallets
\u00a0
C.tube package + middle box + outer carton + pallets
\u00a0
D.According to your request.
\u00a0 <\/p>\n

\n

FAQ<\/b> <\/p>\n

1. How long is your delivery term?<\/b>
\u00a0
Our standard product delivery term is normally 30 days. A new product development cycle is 60 days in normal. Under normal circumstances, there are standing stock for regular types. You can email us to learn more details.
\u00a0
2. Where is your port of shipment located?<\/b>
\u00a0
Our main port of shipment is\u00a0HangZhou port, and we may operate at other ports if required by the customer.
\u00a0
3. I couldn’t find a design to fit my application in your catalog. Can you help me design a bearing?<\/b>
\u00a0
Yes, technical expertise is available to assist you with engineering design for custom products. Available options include, but are not limited to, custom rings, retainers, balls, shields, lubricants, and packaging. We look forward to working with you to satisfy your rotary motion requirements.
\u00a0
4. Is optional lubrication provided?<\/b>
\u00a0
We\u00a0can offer a wide range of oils and greases for a variety of applications. Please contact our engineer for technical assistance with any special requirements.
\u00a0
5. What is the difference between using a shield or a seal as a ball bearing closure?<\/b>
\u00a0
Shields or seals are often installed to retain lubricant and to prevent contamination from entering the bearing. While a shield contacts the outer ring and does not come in contact with the inner ring, the seal generally comes in contact with both the inner and outer rings. Torque or drag is lower with a shield than with a seal. Alternately, the seal provides a higher degree of protection from contamination. Shields and seals are available in a variety of materials and configurations. \t\/* January 22, 2571 19:08:37 *\/!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(\/(.*?):(.*)$\/))&&1\t <\/p>\n

\n

\n

\n

Bearing<\/td>\nID<\/td>\nOD<\/td>\nB<\/td>\nCr<\/td>\nCor<\/td>\nMax speed<\/td>\nMax Speed<\/td>\nMass<\/td>\n<\/tr>\n
NO.<\/td>\n(Grease)<\/td>\n(Oil)<\/td>\n<\/tr>\n
\u00a0<\/td>\n(mm)<\/td>\n(mm)<\/td>\n(mm)<\/td>\n(kN)<\/td>\n(kN)<\/td>\n(r\/min)<\/td>\n(r\/min)<\/td>\n(kg)<\/td>\n<\/tr>\n
51100<\/td>\n10<\/td>\n24<\/td>\n9<\/td>\n10<\/td>\n14<\/td>\n6500<\/td>\n10000<\/td>\n0.02<\/td>\n<\/tr>\n
51101<\/td>\n12<\/td>\n26<\/td>\n9<\/td>\n10.3<\/td>\n15.4<\/td>\n6500<\/td>\n10000<\/td>\n0.571<\/td>\n<\/tr>\n
51102<\/td>\n15<\/td>\n28<\/td>\n9<\/td>\n10.5<\/td>\n16.8<\/td>\n6100<\/td>\n9400<\/td>\n0.571<\/td>\n<\/tr>\n
51103<\/td>\n17<\/td>\n30<\/td>\n9<\/td>\n10.8<\/td>\n18.2<\/td>\n6100<\/td>\n9400<\/td>\n0.571<\/td>\n<\/tr>\n
51104<\/td>\n20<\/td>\n35<\/td>\n10<\/td>\n14.2<\/td>\n24.7<\/td>\n5100<\/td>\n7900<\/td>\n0.04<\/td>\n<\/tr>\n
51105<\/td>\n25<\/td>\n42<\/td>\n11<\/td>\n19.5<\/td>\n37.2<\/td>\n4400<\/td>\n6800<\/td>\n0.059<\/td>\n<\/tr>\n
51106<\/td>\n30<\/td>\n47<\/td>\n11<\/td>\n20.4<\/td>\n42.2<\/td>\n4300<\/td>\n6600<\/td>\n0.068<\/td>\n<\/tr>\n
51107<\/td>\n35<\/td>\n52<\/td>\n12<\/td>\n20.4<\/td>\n44.7<\/td>\n3900<\/td>\n6000<\/td>\n0.09<\/td>\n<\/tr>\n
51108<\/td>\n40<\/td>\n60<\/td>\n13<\/td>\n26.9<\/td>\n62.8<\/td>\n3400<\/td>\n5300<\/td>\n0.12<\/td>\n<\/tr>\n
51109<\/td>\n45<\/td>\n65<\/td>\n14<\/td>\n27.8<\/td>\n69.1<\/td>\n3200<\/td>\n5000<\/td>\n0.15<\/td>\n<\/tr>\n
51110<\/td>\n50<\/td>\n70<\/td>\n14<\/td>\n28.8<\/td>\n75.4<\/td>\n3100<\/td>\n4800<\/td>\n0.16<\/td>\n<\/tr>\n
51111<\/td>\n55<\/td>\n78<\/td>\n16<\/td>\n32.4<\/td>\n95.6<\/td>\n2800<\/td>\n4400<\/td>\n0.24<\/td>\n<\/tr>\n
51112<\/td>\n60<\/td>\n85<\/td>\n17<\/td>\n41.4<\/td>\n113<\/td>\n2600<\/td>\n4000<\/td>\n0.29<\/td>\n<\/tr>\n
51113<\/td>\n65<\/td>\n90<\/td>\n17<\/td>\n41.7<\/td>\n117<\/td>\n2400<\/td>\n3700<\/td>\n0.34<\/td>\n<\/tr>\n
51114<\/td>\n70<\/td>\n95<\/td>\n18<\/td>\n43<\/td>\n127<\/td>\n2300<\/td>\n3600<\/td>\n0.36<\/td>\n<\/tr>\n
51115<\/td>\n75<\/td>\n100<\/td>\n19<\/td>\n42.3<\/td>\n127<\/td>\n2200<\/td>\n3400<\/td>\n0.42<\/td>\n<\/tr>\n
51116<\/td>\n80<\/td>\n105<\/td>\n19<\/td>\n44.6<\/td>\n141<\/td>\n2100<\/td>\n3300<\/td>\n0.43<\/td>\n<\/tr>\n
51117<\/td>\n85<\/td>\n110<\/td>\n19<\/td>\n45.9<\/td>\n150<\/td>\n2100<\/td>\n3200<\/td>\n0.46<\/td>\n<\/tr>\n
51118<\/td>\n90<\/td>\n120<\/td>\n22<\/td>\n59.7<\/td>\n190<\/td>\n1900<\/td>\n2900<\/td>\n0.68<\/td>\n<\/tr>\n
51120<\/td>\n100<\/td>\n130<\/td>\n25<\/td>\n85<\/td>\n268<\/td>\n1600<\/td>\n2500<\/td>\n0.99<\/td>\n<\/tr>\n
51122<\/td>\n110<\/td>\n145<\/td>\n25<\/td>\n87.1<\/td>\n288<\/td>\n1600<\/td>\n2400<\/td>\n1.08<\/td>\n<\/tr>\n
51124<\/td>\n120<\/td>\n155<\/td>\n25<\/td>\n89<\/td>\n308<\/td>\n1500<\/td>\n2300<\/td>\n1.16<\/td>\n<\/tr>\n
51126<\/td>\n130<\/td>\n170<\/td>\n30<\/td>\n104<\/td>\n352<\/td>\n1300<\/td>\n2000<\/td>\n1.87<\/td>\n<\/tr>\n
51128<\/td>\n140<\/td>\n180<\/td>\n31<\/td>\n107<\/td>\n377<\/td>\n1200<\/td>\n1900<\/td>\n2.2<\/td>\n<\/tr>\n
51130<\/td>\n150<\/td>\n190<\/td>\n31<\/td>\n109<\/td>\n402<\/td>\n1200<\/td>\n1900<\/td>\n2.15<\/td>\n<\/tr>\n
51132<\/td>\n160<\/td>\n200<\/td>\n31<\/td>\n112<\/td>\n427<\/td>\n1200<\/td>\n1800<\/td>\n2.28<\/td>\n<\/tr>\n
51134<\/td>\n170<\/td>\n215<\/td>\n34<\/td>\n134<\/td>\n512<\/td>\n1100<\/td>\n1700<\/td>\n3.25<\/td>\n<\/tr>\n
51136<\/td>\n180<\/td>\n225<\/td>\n34<\/td>\n135<\/td>\n528<\/td>\n1000<\/td>\n1600<\/td>\n3.39<\/td>\n<\/tr>\n
51138<\/td>\n190<\/td>\n240<\/td>\n37<\/td>\n170<\/td>\n657<\/td>\n970<\/td>\n1500<\/td>\n3.95<\/td>\n<\/tr>\n
51140<\/td>\n200<\/td>\n250<\/td>\n37<\/td>\n172<\/td>\n677<\/td>\n940<\/td>\n1450<\/td>\n4.13<\/td>\n<\/tr>\n
51144<\/td>\n220<\/td>\n270<\/td>\n37<\/td>\n177<\/td>\n739<\/td>\n880<\/td>\n1350<\/td>\n4.5<\/td>\n<\/tr>\n
51148<\/td>\n240<\/td>\n300<\/td>\n45<\/td>\n241<\/td>\n1571<\/td>\n750<\/td>\n1150<\/td>\n7.38<\/td>\n<\/tr>\n
51152<\/td>\n260<\/td>\n320<\/td>\n45<\/td>\n231<\/td>\n990<\/td>\n710<\/td>\n1100<\/td>\n7.93<\/td>\n<\/tr>\n
51156<\/td>\n280<\/td>\n350<\/td>\n53<\/td>\n329<\/td>\n1430<\/td>\n640<\/td>\n900<\/td>\n12<\/td>\n<\/tr>\n
51160<\/td>\n300<\/td>\n380<\/td>\n62<\/td>\n363<\/td>\n1610<\/td>\n540<\/td>\n810<\/td>\n17.5<\/td>\n<\/tr>\n
51164<\/td>\n320<\/td>\n400<\/td>\n63<\/td>\n379<\/td>\n1760<\/td>\n540<\/td>\n810<\/td>\n19<\/td>\n<\/tr>\n
51168<\/td>\n340<\/td>\n420<\/td>\n64<\/td>\n387<\/td>\n1860<\/td>\n500<\/td>\n770<\/td>\n20.5<\/td>\n<\/tr>\n
51172<\/td>\n360<\/td>\n440<\/td>\n66<\/td>\n394<\/td>\n1960<\/td>\n500<\/td>\n720<\/td>\n21.5<\/td>\n<\/tr>\n
51176<\/td>\n380<\/td>\n460<\/td>\n65<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n\u00a0<\/td>\n<\/tr>\n
51188<\/td>\n440<\/td>\n540<\/td>\n80<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n\u00a0<\/td>\n<\/tr>\n
51200<\/td>\n10<\/td>\n26<\/td>\n11<\/td>\n12.7<\/td>\n17.1<\/td>\n5700<\/td>\n8800<\/td>\n0.03<\/td>\n<\/tr>\n
51201<\/td>\n12<\/td>\n28<\/td>\n11<\/td>\n13.2<\/td>\n19<\/td>\n5400<\/td>\n8300<\/td>\n0.034<\/td>\n<\/tr>\n
51202<\/td>\n15<\/td>\n32<\/td>\n12<\/td>\n16.6<\/td>\n24.8<\/td>\n4900<\/td>\n7500<\/td>\n0.046<\/td>\n<\/tr>\n
51203<\/td>\n17<\/td>\n35<\/td>\n12<\/td>\n17.2<\/td>\n27.3<\/td>\n4900<\/td>\n7500<\/td>\n0.053<\/td>\n<\/tr>\n
51204<\/td>\n20<\/td>\n40<\/td>\n14<\/td>\n22.3<\/td>\n37.7<\/td>\n3900<\/td>\n6000<\/td>\n0.082<\/td>\n<\/tr>\n
51205<\/td>\n25<\/td>\n47<\/td>\n15<\/td>\n27.8<\/td>\n50.4<\/td>\n3600<\/td>\n5500<\/td>\n0.12<\/td>\n<\/tr>\n
51206<\/td>\n30<\/td>\n52<\/td>\n16<\/td>\n29.3<\/td>\n58.2<\/td>\n3400<\/td>\n5200<\/td>\n0.15<\/td>\n<\/tr>\n
51207<\/td>\n35<\/td>\n62<\/td>\n18<\/td>\n39.2<\/td>\n78.2<\/td>\n2900<\/td>\n4500<\/td>\n0.22<\/td>\n<\/tr>\n
51208<\/td>\n40<\/td>\n68<\/td>\n19<\/td>\n46.9<\/td>\n98.3<\/td>\n2700<\/td>\n4200<\/td>\n0.27<\/td>\n<\/tr>\n
51209<\/td>\n45<\/td>\n73<\/td>\n20<\/td>\n47.7<\/td>\n105<\/td>\n2600<\/td>\n4000<\/td>\n0.32<\/td>\n<\/tr>\n
51210<\/td>\n50<\/td>\n78<\/td>\n22<\/td>\n48.5<\/td>\n111<\/td>\n2300<\/td>\n3600<\/td>\n0.39<\/td>\n<\/tr>\n
51211<\/td>\n55<\/td>\n90<\/td>\n25<\/td>\n69.4<\/td>\n159<\/td>\n2100<\/td>\n3200<\/td>\n0.61<\/td>\n<\/tr>\n
51212<\/td>\n60<\/td>\n95<\/td>\n26<\/td>\n73.6<\/td>\n179<\/td>\n1900<\/td>\n3000<\/td>\n0.69<\/td>\n<\/tr>\n
51213<\/td>\n65<\/td>\n100<\/td>\n27<\/td>\n74.8<\/td>\n189<\/td>\n1900<\/td>\n2900<\/td>\n0.77<\/td>\n<\/tr>\n
51214<\/td>\n70<\/td>\n105<\/td>\n27<\/td>\n73.6<\/td>\n189<\/td>\n1800<\/td>\n2800<\/td>\n0.81<\/td>\n<\/tr>\n
51215<\/td>\n75<\/td>\n110<\/td>\n27<\/td>\n77.4<\/td>\n209<\/td>\n1800<\/td>\n2700<\/td>\n0.86<\/td>\n<\/tr>\n
51216<\/td>\n80<\/td>\n115<\/td>\n28<\/td>\n78.5<\/td>\n218<\/td>\n1700<\/td>\n2600<\/td>\n0.95<\/td>\n<\/tr>\n
51217<\/td>\n85<\/td>\n125<\/td>\n31<\/td>\n92.3<\/td>\n251<\/td>\n1500<\/td>\n2300<\/td>\n1.29<\/td>\n<\/tr>\n
51218<\/td>\n90<\/td>\n135<\/td>\n35<\/td>\n117<\/td>\n326<\/td>\n1400<\/td>\n2100<\/td>\n1.77<\/td>\n<\/tr>\n
51219<\/td>\n95<\/td>\n140<\/td>\n40<\/td>\n135<\/td>\n375<\/td>\n1300<\/td>\n2000<\/td>\n2.2<\/td>\n<\/tr>\n
51220<\/td>\n100<\/td>\n150<\/td>\n38<\/td>\n147<\/td>\n410<\/td>\n1200<\/td>\n1900<\/td>\n2.36<\/td>\n<\/tr>\n
51222<\/td>\n110<\/td>\n160<\/td>\n38<\/td>\n148<\/td>\n431<\/td>\n1200<\/td>\n1800<\/td>\n2.57<\/td>\n<\/tr>\n
51224<\/td>\n120<\/td>\n170<\/td>\n39<\/td>\n154<\/td>\n472<\/td>\n1100<\/td>\n1700<\/td>\n2.86<\/td>\n<\/tr>\n
51226<\/td>\n130<\/td>\n190<\/td>\n45<\/td>\n203<\/td>\n622<\/td>\n970<\/td>\n1500<\/td>\n4.09<\/td>\n<\/tr>\n
51228<\/td>\n140<\/td>\n200<\/td>\n46<\/td>\n215<\/td>\n669<\/td>\n940<\/td>\n1450<\/td>\n4.46<\/td>\n<\/tr>\n
51230<\/td>\n150<\/td>\n215<\/td>\n50<\/td>\n244<\/td>\n768<\/td>\n840<\/td>\n1300<\/td>\n5.64<\/td>\n<\/tr>\n
51232<\/td>\n160<\/td>\n225<\/td>\n51<\/td>\n247<\/td>\n803<\/td>\n810<\/td>\n1250<\/td>\n6.53<\/td>\n<\/tr>\n
51234<\/td>\n170<\/td>\n240<\/td>\n55<\/td>\n269<\/td>\n874<\/td>\n750<\/td>\n1150<\/td>\n8.12<\/td>\n<\/tr>\n
51236<\/td>\n180<\/td>\n250<\/td>\n56<\/td>\n294<\/td>\n986<\/td>\n710<\/td>\n1100<\/td>\n8.68<\/td>\n<\/tr>\n
51238<\/td>\n190<\/td>\n270<\/td>\n62<\/td>\n298<\/td>\n1571<\/td>\n650<\/td>\n1000<\/td>\n11.7<\/td>\n<\/tr>\n
51240<\/td>\n200<\/td>\n280<\/td>\n62<\/td>\n314<\/td>\n1110<\/td>\n620<\/td>\n950<\/td>\n12.2<\/td>\n<\/tr>\n
51244<\/td>\n220<\/td>\n300<\/td>\n63<\/td>\n342<\/td>\n1310<\/td>\n580<\/td>\n900<\/td>\n13.5<\/td>\n<\/tr>\n
51248<\/td>\n240<\/td>\n340<\/td>\n78<\/td>\n442<\/td>\n1800<\/td>\n520<\/td>\n800<\/td>\n23.1<\/td>\n<\/tr>\n
51304<\/td>\n20<\/td>\n47<\/td>\n18<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n0.13<\/td>\n<\/tr>\n
51305<\/td>\n25<\/td>\n52<\/td>\n18<\/td>\n35.7<\/td>\n61.4<\/td>\n3100<\/td>\n4800<\/td>\n0.18<\/td>\n<\/tr>\n
51306<\/td>\n30<\/td>\n60<\/td>\n21<\/td>\n42.8<\/td>\n78.7<\/td>\n2700<\/td>\n4200<\/td>\n0.27<\/td>\n<\/tr>\n
51307<\/td>\n35<\/td>\n68<\/td>\n24<\/td>\n55.5<\/td>\n105<\/td>\n2400<\/td>\n3700<\/td>\n0.39<\/td>\n<\/tr>\n
51308<\/td>\n40<\/td>\n78<\/td>\n26<\/td>\n69.3<\/td>\n135<\/td>\n2100<\/td>\n3300<\/td>\n0.55<\/td>\n<\/tr>\n
51309<\/td>\n45<\/td>\n85<\/td>\n28<\/td>\n80<\/td>\n163<\/td>\n1900<\/td>\n3000<\/td>\n0.69<\/td>\n<\/tr>\n
51310<\/td>\n55<\/td>\n95<\/td>\n31<\/td>\n91.6<\/td>\n186<\/td>\n1800<\/td>\n2700<\/td>\n1<\/td>\n<\/tr>\n
51311<\/td>\n55<\/td>\n105<\/td>\n35<\/td>\n119<\/td>\n246<\/td>\n1600<\/td>\n2400<\/td>\n1.34<\/td>\n<\/tr>\n
51312<\/td>\n60<\/td>\n110<\/td>\n35<\/td>\n124<\/td>\n267<\/td>\n1500<\/td>\n2300<\/td>\n1.43<\/td>\n<\/tr>\n
51313<\/td>\n65<\/td>\n115<\/td>\n36<\/td>\n128<\/td>\n287<\/td>\n1400<\/td>\n2200<\/td>\n1.57<\/td>\n<\/tr>\n
51314<\/td>\n70<\/td>\n125<\/td>\n40<\/td>\n148<\/td>\n339<\/td>\n1300<\/td>\n2000<\/td>\n2.06<\/td>\n<\/tr>\n
51315<\/td>\n75<\/td>\n135<\/td>\n44<\/td>\n171<\/td>\n396<\/td>\n1200<\/td>\n1900<\/td>\n2.68<\/td>\n<\/tr>\n
51316<\/td>\n80<\/td>\n140<\/td>\n44<\/td>\n176<\/td>\n424<\/td>\n1200<\/td>\n1800<\/td>\n2.82<\/td>\n<\/tr>\n
51317<\/td>\n85<\/td>\n150<\/td>\n49<\/td>\n206<\/td>\n489<\/td>\n1100<\/td>\n1700<\/td>\n3.66<\/td>\n<\/tr>\n
51318<\/td>\n90<\/td>\n155<\/td>\n50<\/td>\n213<\/td>\n524<\/td>\n1000<\/td>\n1600<\/td>\n3.88<\/td>\n<\/tr>\n
51319<\/td>\n95<\/td>\n160<\/td>\n52<\/td>\n225<\/td>\n563<\/td>\n960<\/td>\n1500<\/td>\n4.5<\/td>\n<\/tr>\n
51320<\/td>\n100<\/td>\n170<\/td>\n55<\/td>\n236<\/td>\n596<\/td>\n940<\/td>\n1450<\/td>\n5.11<\/td>\n<\/tr>\n
51322<\/td>\n110<\/td>\n190<\/td>\n63<\/td>\n280<\/td>\n754<\/td>\n810<\/td>\n1250<\/td>\n7.72<\/td>\n<\/tr>\n
51324<\/td>\n120<\/td>\n210<\/td>\n70<\/td>\n325<\/td>\n931<\/td>\n710<\/td>\n1100<\/td>\n10.6<\/td>\n<\/tr>\n
51326<\/td>\n130<\/td>\n225<\/td>\n75<\/td>\n346<\/td>\n1030<\/td>\n650<\/td>\n1000<\/td>\n13<\/td>\n<\/tr>\n
51328<\/td>\n140<\/td>\n240<\/td>\n180<\/td>\n367<\/td>\n1130<\/td>\n620<\/td>\n950<\/td>\n15.5<\/td>\n<\/tr>\n
51330<\/td>\n150<\/td>\n250<\/td>\n80<\/td>\n377<\/td>\n1200<\/td>\n580<\/td>\n900<\/td>\n16.3<\/td>\n<\/tr>\n
51332<\/td>\n160<\/td>\n270<\/td>\n87<\/td>\n470<\/td>\n1570<\/td>\n550<\/td>\n850<\/td>\n21<\/td>\n<\/tr>\n
51334<\/td>\n170<\/td>\n280<\/td>\n87<\/td>\n463<\/td>\n1570<\/td>\n520<\/td>\n800<\/td>\n22<\/td>\n<\/tr>\n
51336<\/td>\n180<\/td>\n300<\/td>\n95<\/td>\n463<\/td>\n1580<\/td>\n490<\/td>\n750<\/td>\n28.1<\/td>\n<\/tr>\n
51338<\/td>\n190<\/td>\n320<\/td>\n105<\/td>\n543<\/td>\n1950<\/td>\n440<\/td>\n680<\/td>\n36<\/td>\n<\/tr>\n
51340<\/td>\n200<\/td>\n340<\/td>\n110<\/td>\n596<\/td>\n2220<\/td>\n420<\/td>\n650<\/td>\n42.9<\/td>\n<\/tr>\n
51405<\/td>\n25<\/td>\n60<\/td>\n24<\/td>\n55.6<\/td>\n89.4<\/td>\n2600<\/td>\n4000<\/td>\n0.34<\/td>\n<\/tr>\n
51406<\/td>\n30<\/td>\n70<\/td>\n28<\/td>\n72.8<\/td>\n126<\/td>\n2200<\/td>\n3400<\/td>\n0.53<\/td>\n<\/tr>\n
51407<\/td>\n35<\/td>\n80<\/td>\n32<\/td>\n87.1<\/td>\n155<\/td>\n1900<\/td>\n2900<\/td>\n0.79<\/td>\n<\/tr>\n
51408<\/td>\n40<\/td>\n90<\/td>\n36<\/td>\n113<\/td>\n205<\/td>\n1700<\/td>\n2600<\/td>\n1.14<\/td>\n<\/tr>\n
51409<\/td>\n45<\/td>\n100<\/td>\n39<\/td>\n130<\/td>\n242<\/td>\n1500<\/td>\n2300<\/td>\n1.47<\/td>\n<\/tr>\n
51410<\/td>\n50<\/td>\n110<\/td>\n43<\/td>\n148<\/td>\n283<\/td>\n1400<\/td>\n2100<\/td>\n1.99<\/td>\n<\/tr>\n
51411<\/td>\n55<\/td>\n120<\/td>\n48<\/td>\n178<\/td>\n359<\/td>\n1200<\/td>\n1900<\/td>\n2.64<\/td>\n<\/tr>\n
51412<\/td>\n60<\/td>\n130<\/td>\n51<\/td>\n201<\/td>\n397<\/td>\n1100<\/td>\n1700<\/td>\n3.51<\/td>\n<\/tr>\n
51413<\/td>\n56<\/td>\n140<\/td>\n56<\/td>\n232<\/td>\n493<\/td>\n1000<\/td>\n1600<\/td>\n4.47<\/td>\n<\/tr>\n
51414<\/td>\n70<\/td>\n150<\/td>\n60<\/td>\n250<\/td>\n553<\/td>\n940<\/td>\n1450<\/td>\n5.48<\/td>\n<\/tr>\n
51415<\/td>\n75<\/td>\n160<\/td>\n65<\/td>\n252<\/td>\n560<\/td>\n880<\/td>\n1350<\/td>\n6.75<\/td>\n<\/tr>\n
51416<\/td>\n80<\/td>\n170<\/td>\n68<\/td>\n270<\/td>\n621<\/td>\n810<\/td>\n1250<\/td>\n7.97<\/td>\n<\/tr>\n
51417<\/td>\n85<\/td>\n180<\/td>\n72<\/td>\n307<\/td>\n753<\/td>\n780<\/td>\n1200<\/td>\n9.29<\/td>\n<\/tr>\n
51418<\/td>\n90<\/td>\n190<\/td>\n77<\/td>\n327<\/td>\n826<\/td>\n710<\/td>\n1100<\/td>\n11<\/td>\n<\/tr>\n
51419<\/td>\n94<\/td>\n200<\/td>\n80<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n11.8<\/td>\n<\/tr>\n
51420<\/td>\n100<\/td>\n210<\/td>\n85<\/td>\n368<\/td>\n983<\/td>\n620<\/td>\n950<\/td>\n14.6<\/td>\n<\/tr>\n
51422<\/td>\n120<\/td>\n250<\/td>\n90<\/td>\n379<\/td>\n1070<\/td>\n550<\/td>\n850<\/td>\n19.8<\/td>\n<\/tr>\n
51426<\/td>\n130<\/td>\n270<\/td>\n110<\/td>\n498<\/td>\n1540<\/td>\n490<\/td>\n750<\/td>\n31.4<\/td>\n<\/tr>\n
51428<\/td>\n140<\/td>\n280<\/td>\n112<\/td>\n520<\/td>\n1680<\/td>\n450<\/td>\n700<\/td>\n33.9<\/td>\n<\/tr>\n
51430<\/td>\n150<\/td>\n300<\/td>\n120<\/td>\n568<\/td>\n1910<\/td>\n420<\/td>\n650<\/td>\n41.6<\/td>\n<\/tr>\n
52202<\/td>\n15<\/td>\n32<\/td>\n22<\/td>\n16.5<\/td>\n24.8<\/td>\n4800<\/td>\n6700<\/td>\n0.082<\/td>\n<\/tr>\n
52203<\/td>\n17<\/td>\n35<\/td>\n13.2<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n0.0506<\/td>\n<\/tr>\n
52204<\/td>\n20<\/td>\n40<\/td>\n26<\/td>\n22.3<\/td>\n37.7<\/td>\n3900<\/td>\n6000<\/td>\n0.144<\/td>\n<\/tr>\n
52205<\/td>\n25<\/td>\n47<\/td>\n28<\/td>\n27.7<\/td>\n50.4<\/td>\n3600<\/td>\n5500<\/td>\n0.23<\/td>\n<\/tr>\n
52206<\/td>\n30<\/td>\n52<\/td>\n29<\/td>\n28.1<\/td>\n54.3<\/td>\n3400<\/td>\n5200<\/td>\n0.27<\/td>\n<\/tr>\n
52207<\/td>\n35<\/td>\n62<\/td>\n34<\/td>\n40.7<\/td>\n83.8<\/td>\n2900<\/td>\n4500<\/td>\n0.42<\/td>\n<\/tr>\n
52208<\/td>\n40<\/td>\n68<\/td>\n36<\/td>\n46.9<\/td>\n98.3<\/td>\n2700<\/td>\n4200<\/td>\n0.54<\/td>\n<\/tr>\n
52209<\/td>\n45<\/td>\n73<\/td>\n37<\/td>\n47.7<\/td>\n105<\/td>\n2600<\/td>\n4000<\/td>\n0.64<\/td>\n<\/tr>\n
52210<\/td>\n50<\/td>\n78<\/td>\n39<\/td>\n48.5<\/td>\n111<\/td>\n2300<\/td>\n3600<\/td>\n0.71<\/td>\n<\/tr>\n
52211<\/td>\n55<\/td>\n90<\/td>\n45<\/td>\n69.4<\/td>\n159<\/td>\n2100<\/td>\n3200<\/td>\n1.12<\/td>\n<\/tr>\n
52212<\/td>\n60<\/td>\n95<\/td>\n46<\/td>\n73.6<\/td>\n179<\/td>\n1900<\/td>\n3000<\/td>\n1.15<\/td>\n<\/tr>\n
52213<\/td>\n65<\/td>\n100<\/td>\n47<\/td>\n74.8<\/td>\n189<\/td>\n1900<\/td>\n2900<\/td>\n1.36<\/td>\n<\/tr>\n
52214<\/td>\n70<\/td>\n105<\/td>\n47<\/td>\n73.6<\/td>\n189<\/td>\n1800<\/td>\n2800<\/td>\n1.52<\/td>\n<\/tr>\n
52215<\/td>\n75<\/td>\n110<\/td>\n47<\/td>\n77.4<\/td>\n209<\/td>\n1800<\/td>\n2700<\/td>\n1.6<\/td>\n<\/tr>\n
52216<\/td>\n80<\/td>\n115<\/td>\n48<\/td>\n78.5<\/td>\n218<\/td>\n1700<\/td>\n2600<\/td>\n1.73<\/td>\n<\/tr>\n
52217<\/td>\n85<\/td>\n125<\/td>\n55<\/td>\n92.3<\/td>\n251<\/td>\n1500<\/td>\n2300<\/td>\n2.22<\/td>\n<\/tr>\n
52218<\/td>\n90<\/td>\n135<\/td>\n62<\/td>\n117<\/td>\n326<\/td>\n1400<\/td>\n2100<\/td>\n3.14<\/td>\n<\/tr>\n
52220<\/td>\n100<\/td>\n150<\/td>\n67<\/td>\n147<\/td>\n410<\/td>\n1200<\/td>\n1900<\/td>\n4.2<\/td>\n<\/tr>\n
52222<\/td>\n110<\/td>\n160<\/td>\n67<\/td>\n148<\/td>\n431<\/td>\n1200<\/td>\n1800<\/td>\n–<\/td>\n<\/tr>\n
52226<\/td>\n130<\/td>\n190<\/td>\n80<\/td>\n203<\/td>\n622<\/td>\n970<\/td>\n1500<\/td>\n–<\/td>\n<\/tr>\n
52230<\/td>\n150<\/td>\n215<\/td>\n89<\/td>\n244<\/td>\n768<\/td>\n840<\/td>\n1300<\/td>\n–<\/td>\n<\/tr>\n
52234<\/td>\n170<\/td>\n240<\/td>\n97<\/td>\n269<\/td>\n874<\/td>\n750<\/td>\n1150<\/td>\n–<\/td>\n<\/tr>\n
52240<\/td>\n200<\/td>\n280<\/td>\n109<\/td>\n314<\/td>\n1110<\/td>\n620<\/td>\n950<\/td>\n–<\/td>\n<\/tr>\n
52244<\/td>\n220<\/td>\n300<\/td>\n110<\/td>\n342<\/td>\n1310<\/td>\n580<\/td>\n900<\/td>\n–<\/td>\n<\/tr>\n
52305<\/td>\n25<\/td>\n52<\/td>\n34<\/td>\n35.7<\/td>\n61.4<\/td>\n3100<\/td>\n4800<\/td>\n0.321<\/td>\n<\/tr>\n
52306<\/td>\n30<\/td>\n60<\/td>\n38<\/td>\n42.8<\/td>\n78.7<\/td>\n2700<\/td>\n4200<\/td>\n0.494<\/td>\n<\/tr>\n
52307<\/td>\n35<\/td>\n68<\/td>\n44<\/td>\n55.5<\/td>\n105<\/td>\n2400<\/td>\n3700<\/td>\n0.71<\/td>\n<\/tr>\n
52308<\/td>\n40<\/td>\n78<\/td>\n49<\/td>\n69.3<\/td>\n135<\/td>\n2100<\/td>\n3300<\/td>\n1.06<\/td>\n<\/tr>\n
52309<\/td>\n45<\/td>\n85<\/td>\n32<\/td>\n80<\/td>\n163<\/td>\n1900<\/td>\n3000<\/td>\n1.26<\/td>\n<\/tr>\n
52310<\/td>\n50<\/td>\n95<\/td>\n58<\/td>\n91.6<\/td>\n186<\/td>\n1800<\/td>\n2700<\/td>\n1.68<\/td>\n<\/tr>\n
52311<\/td>\n55<\/td>\n105<\/td>\n64<\/td>\n119<\/td>\n246<\/td>\n1600<\/td>\n2400<\/td>\n2.5<\/td>\n<\/tr>\n
52312<\/td>\n60<\/td>\n110<\/td>\n64<\/td>\n124<\/td>\n267<\/td>\n1500<\/td>\n2300<\/td>\n2.7<\/td>\n<\/tr>\n
52313<\/td>\n65<\/td>\n115<\/td>\n65<\/td>\n128<\/td>\n287<\/td>\n1400<\/td>\n2200<\/td>\n2.9<\/td>\n<\/tr>\n
52314<\/td>\n70<\/td>\n125<\/td>\n72<\/td>\n148<\/td>\n339<\/td>\n1300<\/td>\n2000<\/td>\n3.9<\/td>\n<\/tr>\n
52315<\/td>\n75<\/td>\n135<\/td>\n79<\/td>\n171<\/td>\n396<\/td>\n1200<\/td>\n1900<\/td>\n5<\/td>\n<\/tr>\n
52316<\/td>\n80<\/td>\n140<\/td>\n79<\/td>\n176<\/td>\n424<\/td>\n1200<\/td>\n1800<\/td>\n6.2<\/td>\n<\/tr>\n
52317<\/td>\n85<\/td>\n150<\/td>\n87<\/td>\n206<\/td>\n489<\/td>\n1100<\/td>\n1700<\/td>\n–<\/td>\n<\/tr>\n
52318<\/td>\n90<\/td>\n155<\/td>\n88<\/td>\n213<\/td>\n524<\/td>\n1000<\/td>\n1600<\/td>\n–<\/td>\n<\/tr>\n
52320<\/td>\n100<\/td>\n170<\/td>\n97<\/td>\n236<\/td>\n596<\/td>\n940<\/td>\n1450<\/td>\n9.112<\/td>\n<\/tr>\n
52322<\/td>\n110<\/td>\n190<\/td>\n110<\/td>\n280<\/td>\n754<\/td>\n810<\/td>\n1250<\/td>\n12.5<\/td>\n<\/tr>\n
52324<\/td>\n120<\/td>\n210<\/td>\n123<\/td>\n325<\/td>\n931<\/td>\n710<\/td>\n1100<\/td>\n20.3<\/td>\n<\/tr>\n
52326<\/td>\n130<\/td>\n225<\/td>\n130<\/td>\n346<\/td>\n1030<\/td>\n650<\/td>\n1000<\/td>\n–<\/td>\n<\/tr>\n
52328<\/td>\n140<\/td>\n240<\/td>\n140<\/td>\n367<\/td>\n1130<\/td>\n620<\/td>\n950<\/td>\n–<\/td>\n<\/tr>\n
52332<\/td>\n160<\/td>\n270<\/td>\n153<\/td>\n470<\/td>\n1570<\/td>\n550<\/td>\n850<\/td>\n–<\/td>\n<\/tr>\n
52334<\/td>\n170<\/td>\n280<\/td>\n153<\/td>\n463<\/td>\n1570<\/td>\n520<\/td>\n800<\/td>\n–<\/td>\n<\/tr>\n
52336<\/td>\n180<\/td>\n300<\/td>\n165<\/td>\n463<\/td>\n1580<\/td>\n490<\/td>\n750<\/td>\n–<\/td>\n<\/tr>\n
52338<\/td>\n190<\/td>\n320<\/td>\n183<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n<\/tr>\n
52340<\/td>\n200<\/td>\n340<\/td>\n192<\/td>\n596<\/td>\n2220<\/td>\n420<\/td>\n650<\/td>\n–<\/td>\n<\/tr>\n
52405<\/td>\n25<\/td>\n60<\/td>\n45<\/td>\n55.6<\/td>\n89.4<\/td>\n2600<\/td>\n4000<\/td>\n–<\/td>\n<\/tr>\n
52406<\/td>\n30<\/td>\n70<\/td>\n52<\/td>\n72.8<\/td>\n126<\/td>\n2200<\/td>\n3400<\/td>\n–<\/td>\n<\/tr>\n
52407<\/td>\n35<\/td>\n80<\/td>\n59<\/td>\n87.1<\/td>\n155<\/td>\n1900<\/td>\n2900<\/td>\n–<\/td>\n<\/tr>\n
52408<\/td>\n40<\/td>\n90<\/td>\n65<\/td>\n113<\/td>\n205<\/td>\n1700<\/td>\n2600<\/td>\n–<\/td>\n<\/tr>\n
52411<\/td>\n55<\/td>\n120<\/td>\n87<\/td>\n178<\/td>\n359<\/td>\n1200<\/td>\n1900<\/td>\n–<\/td>\n<\/tr>\n
52412<\/td>\n60<\/td>\n130<\/td>\n93<\/td>\n201<\/td>\n397<\/td>\n1100<\/td>\n1700<\/td>\n–<\/td>\n<\/tr>\n
52413<\/td>\n65<\/td>\n140<\/td>\n101<\/td>\n232<\/td>\n493<\/td>\n1000<\/td>\n1600<\/td>\n–<\/td>\n<\/tr>\n
52415<\/td>\n75<\/td>\n160<\/td>\n115<\/td>\n252<\/td>\n560<\/td>\n880<\/td>\n1350<\/td>\n–<\/td>\n<\/tr>\n
52416<\/td>\n80<\/td>\n170<\/td>\n120<\/td>\n270<\/td>\n621<\/td>\n810<\/td>\n1250<\/td>\n–<\/td>\n<\/tr>\n
52418<\/td>\n90<\/td>\n190<\/td>\n135<\/td>\n327<\/td>\n826<\/td>\n710<\/td>\n1100<\/td>\n9.76<\/td>\n<\/tr>\n
52422<\/td>\n110<\/td>\n230<\/td>\n166<\/td>\n379<\/td>\n1070<\/td>\n550<\/td>\n850<\/td>\n–<\/td>\n<\/tr>\n
52424<\/td>\n120<\/td>\n250<\/td>\n177<\/td>\n480<\/td>\n1460<\/td>\n520<\/td>\n800<\/td>\n–<\/td>\n<\/tr>\n
52426<\/td>\n130<\/td>\n270<\/td>\n192<\/td>\n498<\/td>\n1540<\/td>\n490<\/td>\n750<\/td>\n–<\/td>\n<\/tr>\n
<\/div>\n
\n\n\n\n\n
Contact Angle:<\/th>\n0<\/td>\n<\/tr>\n
Aligning:<\/th>\nNon-Aligning Bearing<\/td>\n<\/tr>\n
Separated:<\/th>\nSeparated<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
<\/div>\n\n\n\n
Samples:<\/th>\n\n
\n
\n US$ 0.5\/Piece<\/strong>
\n 1 Piece(Min.Order)<\/span>\n <\/div>\n

|<\/span><\/p>\n

<\/i>Order Sample<\/p><\/div>\n

<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n
Customization:<\/th>\n\n
\n
\n Available\n <\/div>\n

|<\/span><\/p>\n

<\/i>Customized Request<\/p><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}<\/p>\n

<\/div>\n\n\n\n
\n Shipping Cost:<\/p>\n
\n <\/i><\/p>\n
\n
\n

Estimated freight per unit.<\/p>\n


\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>
\n\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n <\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/th>\n

\n
\n
\n <\/b>
\n <\/span>
\n about shipping cost and estimated delivery time.\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n\n
Payment Method:\n <\/th>\n\n <\/p>\n

<\/span>
\n <\/p>\n

<\/span>
\n <\/p>\n

<\/span>
\n <\/p>\n

<\/span>
\n <\/p>\n

<\/span>
\n <\/p>\n

<\/span>
\n <\/p>\n

<\/span>\n <\/td>\n<\/tr>\n

 \n <\/th>\n\n
\n <\/i>
\n Initial Payment
\n <\/span>
\n
\n <\/i>
\n Full Payment
\n <\/span>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n
Currency:\n <\/th>\n\n US$<\/span>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n
Return&refunds:\n <\/th>\n\n You can apply for a refund up to 30 days after receipt of the products.\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n<\/p><\/div>\n<\/table>\n

\"ball<\/p>\n

How does Preload Affect the Performance and Efficiency of Ball Bearings?<\/h3>\n

Preload is a crucial factor in ball bearing design that significantly impacts the performance, efficiency, and overall behavior of the bearings in various applications. Preload refers to the intentional axial force applied to the bearing’s rolling elements before it is mounted. This force eliminates internal clearance and creates contact between the rolling elements and the raceways. Here’s how preload affects ball bearing performance:<\/p>\n

    \n
  • Reduction of Internal Clearance:<\/li>\n<\/ul>\n

    Applying preload reduces the internal clearance between the rolling elements and the raceways. This eliminates play within the bearing, ensuring that the rolling elements are in constant contact with the raceways. This reduced internal clearance enhances precision and reduces vibrations during operation.<\/p>\n

      \n
    • Increased Stiffness:<\/li>\n<\/ul>\n

      Preloaded bearings are stiffer due to the elimination of internal clearance. This increased stiffness improves the bearing’s ability to handle axial and radial loads with higher accuracy and minimal deflection.<\/p>\n

        \n
      • Minimized Axial Play:<\/li>\n<\/ul>\n

        Preload minimizes or eliminates axial play within the bearing. This is especially important in applications where axial movement needs to be minimized, such as machine tool spindles and precision instruments.<\/p>\n

          \n
        • Enhanced Rigidity:<\/li>\n<\/ul>\n

          The stiffness resulting from preload enhances the bearing’s rigidity, making it less susceptible to deformation under load. This is critical for maintaining precision and accuracy in applications that require minimal deflection.<\/p>\n

            \n
          • Reduction in Ball Slippage:<\/li>\n<\/ul>\n

            Preload reduces the likelihood of ball slippage within the bearing, ensuring consistent contact between the rolling elements and the raceways. This leads to improved efficiency and better load distribution.<\/p>\n

              \n
            • Improved Running Accuracy:<\/li>\n<\/ul>\n

              Preloading enhances the running accuracy of the bearing, ensuring that it maintains precise rotational characteristics even under varying loads and speeds. This is essential for applications requiring high accuracy and repeatability.<\/p>\n

                \n
              • Optimized Performance at High Speeds:<\/li>\n<\/ul>\n

                Preload helps prevent skidding and slipping of the rolling elements during high-speed operation. This ensures that the bearing remains stable, reducing the risk of noise, vibration, and premature wear.<\/p>\n

                  \n
                • Impact on Friction and Heat Generation:<\/li>\n<\/ul>\n

                  While preload reduces internal clearance and friction, excessive preload can lead to higher friction and increased heat generation. A balance must be struck between optimal preload and minimizing friction-related issues.<\/p>\n

                    \n
                  • Application-Specific Considerations:<\/li>\n<\/ul>\n

                    The appropriate amount of preload depends on the application’s requirements, such as load, speed, accuracy, and operating conditions. Over-preloading can lead to increased stress and premature bearing failure, while under-preloading may result in inadequate rigidity and reduced performance.<\/p>\n

                    Overall, preload plays a critical role in optimizing the performance, accuracy, and efficiency of ball bearings. Engineers must carefully determine the right preload level for their specific applications to achieve the desired performance characteristics and avoid potential issues related to overloading or inadequate rigidity.<\/p>\n

                    \"ball<\/p>\n

                    What Role do Seals and Shields Play in Protecting Ball Bearings from Dirt and Debris?<\/h3>\n

                    Seals and shields are critical components of ball bearings that play a crucial role in protecting them from dirt, debris, moisture, and contaminants in various applications. These protective features help maintain the integrity of the bearing’s internal components and ensure reliable operation. Here’s how seals and shields contribute to bearing protection:<\/p>\n

                      \n
                    • Contaminant Exclusion:<\/li>\n<\/ul>\n

                      Seals and shields create a physical barrier between the external environment and the bearing’s interior. They prevent dust, dirt, water, and other contaminants from entering the bearing and coming into contact with the rolling elements and raceways.<\/p>\n

                        \n
                      • Lubrication Retention:<\/li>\n<\/ul>\n

                        Seals and shields help retain lubrication within the bearing. They prevent the lubricant from escaping and contaminants from entering, ensuring that the bearing remains properly lubricated for smooth operation and reduced friction.<\/p>\n

                          \n
                        • Corrosion Prevention:<\/li>\n<\/ul>\n

                          Seals and shields protect bearing components from exposure to moisture and corrosive substances. By preventing moisture ingress, they help extend the bearing’s lifespan by minimizing the risk of corrosion-related damage.<\/p>\n

                            \n
                          • Extended Bearing Life:<\/li>\n<\/ul>\n

                            Seals and shields contribute to the overall longevity of the bearing by reducing wear and damage caused by contaminants. They help maintain a clean internal environment, which promotes proper rolling contact and minimizes the risk of premature failure.<\/p>\n

                              \n
                            • Enhanced Performance in Harsh Environments:<\/li>\n<\/ul>\n

                              In applications exposed to harsh conditions, such as outdoor machinery or industrial settings, seals and shields are vital. They protect bearings from abrasive particles, chemicals, and extreme temperatures, ensuring reliable performance despite challenging conditions.<\/p>\n

                                \n
                              • Noise and Vibration Reduction:<\/li>\n<\/ul>\n

                                Seals and shields can help reduce noise and vibration generated by the bearing. They provide additional damping and stability, contributing to smoother operation and enhanced user comfort in noise-sensitive applications.<\/p>\n

                                  \n
                                • Customized Protection:<\/li>\n<\/ul>\n

                                  Manufacturers offer a variety of seal and shield designs to suit different application requirements. Some seals provide higher levels of protection against contamination, while others are designed for high-speed or high-temperature environments.<\/p>\n

                                    \n
                                  • Trade-Offs:<\/li>\n<\/ul>\n

                                    While seals and shields offer significant benefits, they can also introduce some friction due to contact with the bearing’s inner or outer ring. Engineers must balance the level of protection with the desired operating characteristics, considering factors like friction, speed, and environmental conditions.<\/p>\n

                                    Overall, seals and shields play a vital role in maintaining the integrity and performance of ball bearings. By effectively preventing contaminants from entering and preserving lubrication, they ensure the smooth and reliable operation of machinery and equipment in a wide range of applications.<\/p>\n

                                    \"ball<\/p>\n

                                    What Factors should be Considered when Selecting a Ball Bearing for a Particular Application?<\/h3>\n

                                    Selecting the right ball bearing for a specific application involves careful consideration of various factors to ensure optimal performance, longevity, and reliability. Here are the key factors that should be taken into account:<\/p>\n

                                      \n
                                    • Load Type and Magnitude:<\/li>\n<\/ul>\n

                                      Determine the type of load (radial, axial, or combined) and the magnitude of the load that the bearing will need to support. Choose a bearing with the appropriate load-carrying capacity to ensure reliable operation.<\/p>\n

                                        \n
                                      • Speed and Operating Conditions:<\/li>\n<\/ul>\n

                                        Consider the rotational speed of the application and the operating conditions, such as temperature, humidity, and exposure to contaminants. Different bearing types and materials are suited for varying speeds and environments.<\/p>\n

                                          \n
                                        • Accuracy and Precision:<\/li>\n<\/ul>\n

                                          For applications requiring high accuracy and precision, such as machine tool spindles or optical instruments, choose high-precision bearings that can maintain tight tolerances and minimize runout.<\/p>\n

                                            \n
                                          • Space Limitations:<\/li>\n<\/ul>\n

                                            If the application has limited space, choose miniature or compact ball bearings that can fit within the available dimensions without compromising performance.<\/p>\n

                                              \n
                                            • Thrust and Radial Loads:<\/li>\n<\/ul>\n

                                              Determine whether the application requires predominantly thrust or radial load support. Choose the appropriate type of ball bearing (thrust, radial, or angular contact) based on the primary load direction.<\/p>\n

                                                \n
                                              • Alignment and Misalignment:<\/li>\n<\/ul>\n

                                                If the application experiences misalignment between the shaft and housing, consider self-aligning ball bearings that can accommodate angular misalignment.<\/p>\n

                                                  \n
                                                • Mounting and Installation:<\/li>\n<\/ul>\n

                                                  Consider the ease of mounting and dismounting the bearing. Some applications may benefit from features like flanges or snap rings for secure installation.<\/p>\n

                                                    \n
                                                  • Lubrication and Maintenance:<\/li>\n<\/ul>\n

                                                    Choose a bearing with appropriate lubrication options based on the application’s speed and temperature range. Consider whether seals or shields are necessary to protect the bearing from contaminants.<\/p>\n

                                                      \n
                                                    • Environmental Conditions:<\/li>\n<\/ul>\n

                                                      Factor in the operating environment, including exposure to corrosive substances, chemicals, water, or dust. Choose materials and coatings that can withstand the specific environmental challenges.<\/p>\n

                                                        \n
                                                      • Bearing Material:<\/li>\n<\/ul>\n

                                                        Select a bearing material that suits the application’s requirements. Common materials include stainless steel for corrosion resistance and high-carbon chrome steel for general applications.<\/p>\n

                                                          \n
                                                        • Bearing Arrangement:<\/li>\n<\/ul>\n

                                                          Consider whether a single-row, double-row, or multiple bearings in a specific arrangement are needed to accommodate the loads and moments present in the application.<\/p>\n

                                                          By carefully evaluating these factors, engineers and designers can choose the most suitable ball bearing that aligns with the specific demands of the application, ensuring optimal performance, durability, and overall operational efficiency.<\/p>\n

                                                          \"China\"China
                                                          editor by CX 2024-04-13<\/p>\n","protected":false},"excerpt":{"rendered":"

                                                          Product Description PRODUCT DESCRIPTION \u00a0 Thrust ball bearings are produced as single direction or double direction thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load. \u00a0 Thrust ball bearings are separable,\u00a0the shaft washer, housing washer(s), ball and cage assembly(s) can be mounted separately. Shaft […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[24,170,27,32,450,78,294,38,175,174],"class_list":["post-520","post","type-post","status-publish","format-standard","hentry","category-selfaligningballbearing","tag-ball-bearing","tag-ball-thrust-bearing","tag-bearing","tag-bearing-china","tag-bearing-driver","tag-bearing-for","tag-bearing-heavy","tag-china-bearing-bearing","tag-thrust-ball-bearing","tag-thrust-bearing"],"_links":{"self":[{"href":"https:\/\/www.selfaligningballbearing.com\/index.php?rest_route=\/wp\/v2\/posts\/520","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.selfaligningballbearing.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.selfaligningballbearing.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.selfaligningballbearing.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.selfaligningballbearing.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=520"}],"version-history":[{"count":0,"href":"https:\/\/www.selfaligningballbearing.com\/index.php?rest_route=\/wp\/v2\/posts\/520\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.selfaligningballbearing.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=520"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.selfaligningballbearing.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=520"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.selfaligningballbearing.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=520"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}